Related
Ok so my Cingular 8525 is basically unusable due to the touchscreen thinking it's getting taps in the upper right corner (upper left in landscape mode). This has the nice effect of closing programs down to the today screen in portrait mode or constantly popping up the start menu in landscape mode (about three times a second). Any ideas?
I tried soft resetting and also removing the battery for several minutes. Haven't tried a hard reset as I don't want to go through that except for a last resort. Tried wiping the screen with a soft cloth. There are no weird programs on the device except what everyone here uses.
I still have 5 days before the end of my 30 days return period with Cingular. If I bring it back will they just give me another one?
aroundlsu said:
Ok so my Cingular 8525 is basically unusable due to the touchscreen thinking it's getting taps in the upper right corner (upper left in landscape mode). This has the nice effect of closing programs down to the today screen in portrait mode or constantly popping up the start menu in landscape mode (about three times a second). Any ideas?
I tried soft resetting and also removing the battery for several minutes. Haven't tried a hard reset as I don't want to go through that except for a last resort. Tried wiping the screen with a soft cloth. There are no weird programs on the device except what everyone here uses.
I still have 5 days before the end of my 30 days return period with Cingular. If I bring it back will they just give me another one?
Click to expand...
Click to collapse
on your touchscreen problem.. i have seen this occur by someone improperly putting on a screen protector or maybe there is some dirt up there.. and if you take it back to the store they may give you a new one or make you call the warranty by mail line and get a replacement that way
..... or your OK button could be stuck down
I took a bottle of lens cleaner from my camera bag and thoroughly cleaned the screen. I ran my fingernails under the edge of the screen and really made sure no dirt was under there. Lo and behold, it seems to be working fine now. I browsed some RSS headlines for about 10 minutes with no problems.
Weird though, I have used an Ipaq 4705 WM5 pocket pc for two years now and really ran it through the ringer. It looks like it's been to war and back (which it has in a since) and never experienced errant screen taps. Oh well, still enjoying the 8525 (last phone was 2125).
Thanks so much!
kevino said:
..... or your OK button could be stuck down
Click to expand...
Click to collapse
good point, i had that problem once also, forgot all about it
aroundlsu said:
I took a bottle of lens cleaner from my camera bag and thoroughly cleaned the screen. I ran my fingernails under the edge of the screen and really made sure no dirt was under there. Lo and behold, it seems to be working fine now. I browsed some RSS headlines for about 10 minutes with no problems.
Weird though, I have used an Ipaq 4705 WM5 pocket pc for two years now and really ran it through the ringer. It looks like it's been to war and back (which it has in a since) and never experienced errant screen taps. Oh well, still enjoying the 8525 (last phone was 2125).
Thanks so much!
Click to expand...
Click to collapse
Just a note of caution!!! This is related to the screen alignment issue i.e. the touch sensitive area of the screen continuing beneath the bezel and causing unwanted touches whether through dust or the sticky gasket in there.
May not return, or will be cured again by the "business card" fix / or as you did a firm clean to release the screen from touching the bezel.
But, it's a question for you, if you only have 5 days left under warranty. Most people with the SA problem find the first signs appear in the first couple of weeks. I would certainly put it through it's paces, open up a few applications leave wifi on so it heats up, surf web over wifi etc etc as the added bit of heat generated internally was a known factor in exacerbating the problem. If all stays well over next couple of days maybe it'll be OK.
Would be good to get urgent feedback from anyone with a newer Hermes who's had this issue and what happened.
Mike
Argh, it's back. OK, I'm certain it's a touchscreen problem and not a button sticking as holding down OK will not cause the start menu to pop up while an application is up and holding the windows key will not close an app. Also the problem is delayed if I hold the stylus down on the screen. It's just the upper right (portrait mode) of the screen that is getting the errant screen tap (about three or four times a second).
I've ran a business card through the edges and it doesn't help. I'm not going to take this thing apart. I did that several times with the 2125 to fix unresponsive keys and joystick but the problems always reappear. My one year old 2125 is barely functional now. My g/f would rather keep her crap LG flip phone then inhieret the 2125 after watching me battle it. That's pretty sad.
I'm going to try a hard reset (second one in three weeks) and if that doesn't help I'm returning it to Cingular and getting my money back. Then I'll either buy another one or a blackjack. I like the 3g and love this device. It's my third Windows Mobile 5.0 product. I don't like the sub-par build quality on my second HTC product now. I paid $599 plus tax for this phone at a local Cingular store (despite the web store saying $550).
My advice for what it's worth is take it back. This screen business has a habit of coming and going and it's entirely possible you hard reset and everything is fine and two weeks later it's back. Also would be better to return with the issue present (not that they wouldn't believe you -would they?)
On the whole though this problem is much more rare than it was, so if you do get the same device again hopefully you will be luckier. If you get directly from shop though check the firmness of the key board clicking into place that seems to still be fairly common problem.
Not the best start to the new year!!
Mike
Well I got desperate and hard reset... I could barely get past the screen alignment startup so needless to say that didn't fix things. Having gone this far and thoroughly pissed at having to reinstall everything I decided to loosen those screws on the back and run a card around the edges.
So far, it's working! I'm not content settling on this hack though so I'm bringing it back Tuesday and will update on my experience at the retail store (not looking forward to that).
Happy new year and thanks for all the super fast responses guys!
Alignment
I was browsing the www the other day and saw a korean/ japanese site showing the inside of these precious devices, and (as pointed out above) how the seal/ gasket underneath the bezel is the root cause of our anguish.
There were some detailed pics of how you can DIY, and remove the gasket, but it's no where near me basic level of competency.
Why would they design a touch-screen to big for the device I wonder???
there is also the business card trick about sliding it underneath the edges to loosen the gasket... there is a whole thread on this screen alignment issue
what site shows how to fix the gasket?
There is a post about someone seeing a site showing how to fix the gasket proplem on the touch screen. Could I please get the URL??
johniz1967 said:
There is a post about someone seeing a site showing how to fix the gasket proplem on the touch screen. Could I please get the URL??
Click to expand...
Click to collapse
Look down this page. Keep in mind non of the theoretical solutions is guaranteed/
http://wiki.xda-developers.com/index.php?pagename=Hermes_Problems
Mike
Just got back in from my local Cingular store and actually had a pleasant, hassle-free experience exchanging my 8525 for a brand new one. I explained to the CSR the issue and she immediately understood the problem (must not be the first guy walking in there about this).
Unfortunately, she didn't have any in stock but merrily called around and found six others in stock at nearby stores. So off I went to the next store and had the old 8525 exchanged for a new one in less then ten minutes. The CSR didn't even bother to look at the old phone or check the accessories I returned with it.
The new 8525 is syncing up as I write this and immediately I notice some things are different. First of all, written on the side of the box is 12/26. So we know this phone is probably brand new. The keyboard does indeed click in and out more firmly then my old one. The USB cable plugs in tighter (a good thing, I was always getting USB connection problems), and lo and behold Windows Vista installed HTC sync drivers then Media Player automatically recognized the device (never did any of that on the old one).
I'm using the Windows Mobile Device Center Beta on Vista RTM and it just finished syncing without any problems. Moral of this story is if your 8525 is experiencing any problems at all and you are within 30 days, return it for a hassle free refund.
Good news and you're absolutely right about getting it back within warranty if there's a fault.
Great stuff!
Mike
aroundlsu said:
Just got back in from my local Cingular store and actually had a pleasant, hassle-free experience exchanging my 8525 for a brand new one. I explained to the CSR the issue and she immediately understood the problem (must not be the first guy walking in there about this).
Unfortunately, she didn't have any in stock but merrily called around and found six others in stock at nearby stores. So off I went to the next store and had the old 8525 exchanged for a new one in less then ten minutes. The CSR didn't even bother to look at the old phone or check the accessories I returned with it.
The new 8525 is syncing up as I write this and immediately I notice some things are different. First of all, written on the side of the box is 12/26. So we know this phone is probably brand new. The keyboard does indeed click in and out more firmly then my old one. The USB cable plugs in tighter (a good thing, I was always getting USB connection problems), and lo and behold Windows Vista installed HTC sync drivers then Media Player automatically recognized the device (never did any of that on the old one).
I'm using the Windows Mobile Device Center Beta on Vista RTM and it just finished syncing without any problems. Moral of this story is if your 8525 is experiencing any problems at all and you are within 30 days, return it for a hassle free refund.
Click to expand...
Click to collapse
since your appears to be new from 12/26.. i am curious what firmware is on that phone.. details please
Cingular 8525 touch screen no working
I am having a problem with the touch screen on my 8525. My phone was working fine then the then the screen stopped responding. I was able to navigate via keyboard but that was it. I did a soft reset and it did not help. I then did a hard reset and the screen went to the setup and wants to align the screen which obviously I cannot do.
The changes I have made the same day prior to it not working are as follows:
-Unlocked with Hermes SIM Unlock
-Installed latest Cingular ROM
-Installed fit4cat Hermes Tweaker v1.1a
The phone worked fine for about 12 hrs before the touch screen stopped working.
Any suggestions?
Hey there, I have had the problem before (about 3.5 weeks ago). I had to send it in for service (since I am not a Cingular customer anymore but use the 8525 with T-mobile).Good luck.
wedgesurfer said:
I am having a problem with the touch screen on my 8525. My phone was working fine then the then the screen stopped responding. I was able to navigate via keyboard but that was it. I did a soft reset and it did not help. I then did a hard reset and the screen went to the setup and wants to align the screen which obviously I cannot do.
The changes I have made the same day prior to it not working are as follows:
-Unlocked with Hermes SIM Unlock
-Installed latest Cingular ROM
-Installed fit4cat Hermes Tweaker v1.1a
The phone worked fine for about 12 hrs before the touch screen stopped working.
Any suggestions?
Click to expand...
Click to collapse
Bout a week ago my FrankenPhone (its a softbank TyTn, with an Cingular 8525 Main Board) started to fritz out, the screen would tap repeatedly without me touching it. Then it just stopped working altogether, the screen worked but the touch didn't. I reflashed my 6.1 rom but to no avail. Acutally it was worse, I was stuck on the green 'tap here to begin' screen. So, my 85Ty1HT whatever it is was once again dead. (on a side note I'm now the proud owner of a Blackjack 2 backup phone which really isnt half bad. Thanks craigslist). I use the internet sharing pretty often on the road so i was determined to bring my phone back to life.
Short story long, I ordered a replacement screen/digitizer from blackberry8100parts.com It was pretty darn cheap, less then $50 shipped to my door, excellent service and great value. I popped the new screen in, fumbled a few times trying to get that funky ribbon cable connected. But everything is back to normal, and the Blackjack gets to live in a drawer until I drop or otherwise try and destroy my trusty Hermes again.
I followed the advice not to order just the digitizer, i think it worked out pretty good, I don't own any soldering tools. But the replacement of the whole screen assembly is very straight forward.
derf
mikechannon said:
Good news, well done. I am very curious to know how you resolved the battery connector problem:
http://forum.xda-developers.com/showthread.php?p=2001584#post2001584
Mike
Click to expand...
Click to collapse
Thats the frakenfone part. I bought an 8525 from Ebay with a cracked screen and used the main board from it. I was going to use the digitizer from that same phone but figured it wasn't worth the hassle.
Hi all,
Looks like my Sprint Vogue is flaking out on me. The touchscreen is suddenly and without warning not working at all. Everything else works (all other buttons, activesync, all functions). I'd like to do a hard reset before giving up on it, but I'd really like to sync my contacts/messages/photos/etc before doing that. So here's the problem- I use Dashwire to sync, and I'm unable to hit the "SYNC NOW" button!
Any ideas on how to switch to and activate the bottom left and bottom right menu buttons without being able to touch them? For example, the Inbox and Menu buttons on the Mail app screen, or Album/Slideshow on the Photos and Videos screen? If I can get to those I'll be able to activate the sync. Any help would be great!
Thanks,
Bogus
There is a application called "MyMobiler" which allows you to control your phone over ip/usb/bluetooth. If i remember correctly launching the installer on your pc while your phone is connected to activesynch will install it without having to press anything.
Awesome, thank you. That did exactly what I needed it to!
Once it finishes sync'ing I'll give the reset a shot and see if the screen is really borked or not.
No problem glad i could help. If the touchscreen refuses to work you might wanna try replacing it. The part is called a digitzer and they go for 15-20 dollars online. I bought one and it wasn't difficult at all to replace.
Yeah, that's the plan. Hard reset didn't fix the problem, so I'm guessing that part is busted. Between this site and PPCG I found the guide for taking apart the phone, so it's looking like I'll be doing some minor surgery in a few days.
bogus83 said:
Yeah, that's the plan. Hard reset didn't fix the problem, so I'm guessing that part is busted. Between this site and PPCG I found the guide for taking apart the phone, so it's looking like I'll be doing some minor surgery in a few days.
Click to expand...
Click to collapse
How would the touch screen instantly not work?
maybe someone let it fall and put it back to normal like nothing happened
and i know what u mean.I dont wanna give up my vogue. EVER,
but im 15...by the time im 30, i wont remember what vogue is.LOL.
Actually, it seems to have developed a very small air bubble in the very upper left corner. I'm pretty sure that's causing the digitizer to think there's constant pressure in that area, evidenced by the "Start" menu occasionally activating when I turn on the phone. I ordered a new digitizer anyway- the set of torx screwdrivers I'd need to open the case cost the same as a new digitizer and the screwdriver I need. I don't really understand how the air bubble formed (or even what it is contained in), but one way or another I'll resolve the problem next week.
And I just turned 26- I'm sure by the time I'm 30 I'll be sporting a Touch Pro 4 running Windows Mobile 8.5
Well, the digitizer and tools came much faster than I'd anticipated (I won the auction on eBay on Friday, paid same day, and got it in the mail today, shipped from CA to NY!). So I dove right in. It was a straightforward affair- remove the four torx screws from the back under the cover, remove the speaker, pry open the front from the mainboard, disconnect the keypad circuit board from the mainboard and the digitizer from the keypad board, push out the old digitizer, swap in the new one and hook it all back up.
Not for the faint of heart to be sure, but for someone who likes to tinker it was a lot of fun. Took maybe 15 minutes because prying the case from the mainboard was difficult. More accurately, the top plastic case is extremely thin and fragile- if you do this you'll almost definitely crack it in at least one place. If not, you'll crack it pushing the digitizer out from behind. But I'm not that worried about cosmetics, I got my Vogue second-hand off-contract, refurbished, so it wasn't exactly mint to begin with.
On the plus side, the repair worked like a charm! I tested every touch feature I could think of and as many areas of the screen as I could, it actually seemed to respond better than when I initially got the phone. The odd part is I could still see the air bubble in the old screen, and couldn't flatten it out even by squeezing on both sides of it. I wish I knew how it formed so I could prevent it from happening again, but I'll just have to be careful.
So to anyone considering this project:
If you're worried about damaging the casing and have insurance or a warranty or something like that, take it to the phone company to get it repaired.
For anyone else, the $15 bucks for the screen and three tools is a lot cheaper than buying a new phone. Plus you get the geek cred for repairing your own phone.
After 4 months of flawless work, the lower part of the screen (a strip several millimeters from the edge) suddenly stopped responding properly!
E.g., all buttons in this area (including launcher/phone/+ on home screen) either don't work at all, or sometimes activate after a while when strongly pressed with the thumb (orientation doesn't matter).
Just two hours before they responded fine to the index finger.
Also, I've noticed that when I "multi-touch" the lower line in a file browser with two fingers, it works nice! Buttons are too small for that, however
I first tried to restore backup, but it didn't help, of course.
Has anybody had the same problem?? I guess it's a warranty case ...
I would agree, it's probably a hardware problem that you'll have to bring your phone in for service to get fixed.
I'm having that same problem my self, but just now and then. What helped with me is that I press the upper left corner of the phone with my other hand and then the lower part works fine, so i think i should get a new digitizer or its just loose connector.
im having the same problem , i have put up with it for the past few weeks and its driving me nuts now. today i did a factory reset which made no difference , i called htc who didnt sound a bit suprised by my phone call it gets picked up tomorrow morning to go for repair so the question is ... is this a common fault? and how the hell am i gonna cope without my hero in my pocket ?
Yeah happened to mine last week, a few have had the same issue where it's just the launcher bit not responding. Although the good news is that I'm getting it back tomorrow though so it's good times!
I had the same problem with my touchscreen (after a month or so!)
Mine got picked up thursday by HTC and I just checked the tracking site and they just recieved it.
I wonder how long it's going to take
Visited their service center last week.
They've immediately replaced my screen with a new one without any ado. Now everything works as before!
BUT a friend of mine who bought his Hero in January is having similar problems now...
It is a common problem according to HTC.
Mine was repaired in just 10 days.
Same problem here, did htc said anything about this problem? is it a common fault?
thank you
I said it in the post above yours.
ah yes, right, thank you
mach2005 said:
It is a common problem according to HTC.
Click to expand...
Click to collapse
If they acknowledge it officially, couldn't you provide a link please?
i gave mine last week to repair, they returned to me unfixed. on the paper stated that they only updated the software, what a dumb this htc guys. need to go back and tell them again the same story. im wasting my time only for this. wtf
I recently had this problem. The 3 buttons at the bottom of the screen wouldn't respond, took it into T-Mobile who said I'd have it back within about 7 to 10 days... 3 weeks later I got a text saying I could collect my phone...
On the paper sheet it says they've replaced the lens.. Which I can see they have as before I had a miniscule hairline scratch near the top.
They also mention a software update (1.0.0.A6288)
Either way it works nicely now.
I've recently experienced the same issue - the lower part of the screen, the one where the LauncherPro icons usually are stopped responding to touch. If I press really hard it works sometimes, but it's pretty annoying. I didn't sit on the phone or drop it recently, it just stopped working all of a sudden.
Is there anything I can do, as the phone is out of warranty ?
HTC South Africa gave me a new hero after I took mine in for the 3rd time. Hardware problem. Very happy with their service.
i have this exact same problem, is the only solution to send to htc? >_> Cuz my warranty's out already unfortunately... i flashed my hero to CyanogenMod 7 and it seems to have helped, but still not completely responsive... I also have a problem where at times i completely lose control of my touch screen where the spots i touch seem to respond to opposite sides of the screen... anyone else?
Remove battery, Remove sim card. put a dryer on the htc logo for about 40 mins. put the phone under a heavy object. Let it dry for about 15 mins and your fixed.
^ wtf do u mean?... are u just being a gimp...
VillainRocks said:
Remove battery, Remove sim card. put a dryer on the htc logo for about 40 mins. put the phone under a heavy object. Let it dry for about 15 mins and your fixed.
Click to expand...
Click to collapse
i am having the same problem and i badly need to solve it please could u tell me that what do you exactly mean by put a dryer on the htc logo
thanks
Today I noticed that my HD2 vibrates strangely, it sounds like a shaving machine when vibrating
I performed many soft resets, hard reset, then I flashed an offcial ROM, SPL, etc. but nothing works. I guess the problem is related with the vibration hardware.
I will be sending my phone to HTC service tomorrow, and let you know about the results.
Anybody faced the problem? Or any suggestion before sending the device to service?
Thanks...
vizier said:
Today I noticed that my HD2 vibrates strangely, it sounds like a shaving machine when vibrating
I performed many soft resets, hard reset, then I flashed an offcial ROM, SPL, etc. but nothing works. I guess the problem is related with the vibration hardware.
I will be sending my phone to HTC service tomorrow, and let you know about the results.
Anybody faced the problem? Or any suggestion before sending the device to service?
Thanks...
Click to expand...
Click to collapse
I remember (2months ago) that my vibrate works strangely, i hard reset and it works again perfectly!
There was some issue posted a few times where the camera flash was pressed in, and was interfering with the vibration somehow.
avivsworld said:
There was some issue posted a few times where the camera flash was pressed in, and was interfering with the vibration somehow.
Click to expand...
Click to collapse
I think I have the same problem, my camera flash seems to be pressed in (one side of it).
Is there an easy solution or should I hand it to the service?
Thanks...
avivsworld said:
There was some issue posted a few times where the camera flash was pressed in, and was interfering with the vibration somehow.
Click to expand...
Click to collapse
I am trying to find the older posts you mention, but no luck so far. Can you post the links to those post, I might be searching with the wrong keywords or something like that...
Thanks...
Vibration seems to be a big problem. I had the same issue. only solution: warranty repair. my phone was replaced by 02.
vizier said:
I am trying to find the older posts you mention, but no luck so far. Can you post the links to those post, I might be searching with the wrong keywords or something like that...
Thanks...
Click to expand...
Click to collapse
Can't seem to find them... anyway, the flash housing is nearly directly over the vibration motor thing, and if the plastic flash cover gets loose it could very well push the flash housing down (it's not very secure, pretty soft metal actually) and block the motor.
Just check if the plastic flash cover is pushed in from the rest of the body.
E: If it is, then get it repaired by warranty, as it's not worth opening it up to fix yourself and voiding your warranty.
avivsworld said:
Can't seem to find them... anyway, the flash housing is nearly directly over the vibration motor thing, and if the plastic flash cover gets loose it could very well push the flash housing down (it's not very secure, pretty soft metal actually) and block the motor.
Just check if the plastic flash cover is pushed in from the rest of the body.
E: If it is, then get it repaired by warranty, as it's not worth opening it up to fix yourself and voiding your warranty.
Click to expand...
Click to collapse
This is exactly what happened to my phone. The lower part of the plastic flash cover looks pushed in (I checked with another working HD2).
And yes, I handed the phone to the service today. I hope they do not break other things when trying to fix this issue
Thanks...
Vibration lost
avivsworld said:
Can't seem to find them... anyway, the flash housing is nearly directly over the vibration motor thing, and if the plastic flash cover gets loose it could very well push the flash housing down (it's not very secure, pretty soft metal actually) and block the motor.
Just check if the plastic flash cover is pushed in from the rest of the body.
E: If it is, then get it repaired by warranty, as it's not worth opening it up to fix yourself and voiding your warranty.
Click to expand...
Click to collapse
Hi,
My Leo stopped vibrating. I saw your posts and checked the camera flash. It was indeed pushed in. My warranty was not valid, so I tried to fix it myself. It was actually very easy. I followed a video showing how to disassemble the Leo . As soon as the housing is removed, we have access to the flash plastic cover. I've just snapped it in very carefully et voilá: the phone is back to its own self!
Many thanks for the tip. I would never have guessed it was related to the flash cover!!
Maria
doloresbf said:
Hi,
My Leo stopped vibrating. I saw your posts and checked the camera flash. It was indeed pushed in. My warranty was not valid, so I tried to fix it myself. It was actually very easy. I followed a video showing how to disassemble the Leo . As soon as the housing is removed, we have access to the flash plastic cover. I've just snapped it in very carefully et voilá: the phone is back to its own self!
Many thanks for the tip. I would never have guessed it was related to the flash cover!!
Maria
Click to expand...
Click to collapse
I am glad you fixed your problem easily.
My phone is still not back from the service
I have my phone back...
Finally, I have my phone back. The service report tells me that they have changed a part responsible for vibration. I checked the vibration functionality and actually it is working fine now. One surprise however is that the flash cover still appears to be pushed in.
Same problem
My TMobileUS HD2 is having the exact same problem - no vibration at all, even after hard reset. I also see the camera light's assembly is no longer correctly positioned in the body as it should be. It seems that the lower end is pulling into the body of the phone.
I treat my phone very gently, so I'm sure this didn't happen from rough treatment. Given that it's happening on a number of contiinents, this looks like a design defect.
TMobile demanded that I send it in for warranty service.
No Vibration Either
I have a TMOUS HD2, and I may have been the cause of this happening after reading this. I have no clue what you're talking about, but I have dropped the phone a few times and though the problem didn't happen right after a drop, it was just odd how it started. I had it set to vibrate when I pressed any keys, and then I was texting and it stopped. So... the only thing that I've seen that is a case that I only seem to have, my phone vibrates AT WILL, but when it does, it's very raspy and sounds very 'sick' and loud. So, I am not about to open my phone. I'm tech savvy enough, but in no way have I ever tinkered with hardware. I got my HD2 back in May, so I'm hoping that I have a warenty through HTC at least. I haven't contacted anyone about this, so is it my best bet to just send it to HTC or contact T-Mobile? And I have insurance, but I purchased my phone from Walmart. lol. Help?
I just came across this thread....
my vibrate function has been broken for several months and I've been delaying sending in for repair because I'm afraid of how long it will take (plus, it is the Australian version so I dont know if HTC North American will actually repair it under the current warranty)
I noticed that the bottom part of my flash does in fact seem to be pushed in. I'm considering doing what Maria did (opening it herself and popping the flash back into place). Does anyone have a sense of how long the repair takes from HTC?
Thanks
VIBRATION and FLASH PROBLEM
i'm having the same problem... lower part of the flash is pushed in. and vibration sometimes functioning sometimes not... but worst my FLASH NOT WORKING AT ALL...
Now having the same problem. This is a design flaw if I've ever seen one.
Same problem here, vibration was not working, but I just fix it!
I bought this T-Mobile HTC HD2 off eBay, and turns out that the vibration was not working!!
Once I found out this thread and the information about how the flash cover was blocking the vibration motor from functioning, I was able to confirm this was exactly what was happening!
So, I decided to open up the phone. I did not had to extract the entire screen piece out, I just had to unscrew the four screws and use a "shower suction thingy" on the screen to help pull it out but just the top part (in other words, half way out), because I only needed access to where the flash cover was, and then I was able to use a thin screw driver to PUSH back the flash cover to it right position. Then, after putting everything back to its place, the vibrator motor started to work!!!
Maybe I will put some "super glue" on the flash plastic cover to secure from being accidentally being push in in the future. Anyways, thank you everyone here on the forum for sharing your ideas!
As a late follow-up to mine... I called HTC and got an RMA number. Put off mailing it in for 3 weeks while I backed it up and arranged a temporary phone.
Mailed it on a Friday. Had it back with a replaced back on Monday.
I was EXTREMELY happy with the customer service on this one!
Missed 3 calls today... realize phone is not vibrating. Check different things that should make phone vibrate... nothing...
Flash lens is not pushed in this time... I'm about a month out of warranty now. Wonder how this is going to go over
I had this exact problem occur a few days ago, and I opened it up and simply snapped the light cover back into place carefully. But my phone still wasn't vibrating, so I opened it up again and I saw that the black rubber around the vibrate motor was causing the part that creates the vibration to get stuck. I simply just snipped a bit away so that the it was free and ta da! However the vibration is still weak compared to before so I don't know how to fix that? hope this helps you, and if someone knows why the vibration might be weaker than before the problem started any help would be great. thanks