X1 doesn't show who's calling - XPERIA X1 General

Ok so my phone has rang 3x this evening and it doesnt show who is calling. It just says "Answer / Ignore" by the softkeys...
It did it yesterday too
Im on Stock ROM using the SPB Mobile Shell Panel
Any ideas?

i had this problem,, i uninstalled all the applications, nothing changed,, so during my math class i did a system restore to its manufacture sittings >.>" and then i re-installed all the applications i had.. and its working just fine now..

Related

Help before I put it through a window XDA2i

6 month old O2 XDA2i only program loaded is TT5
ROM version 1.10.00 WWE
ROM date 12/24/02
Radio version 1.00.00
Protocol version 1337.39
ExtROM version 1.10.124 WWE
Being used in corporate mode 0506 code
Here's the story... needed to use phone to call an ambulance for my fiance (she smashed her collar bone and now has a titanium plate and pins) 10weeks ago.. batt at 12% turned it on and caught the camera button whilst pressing the phone button. screen went all funny - vertical lines. Soft and Hard reset failed!!! had to fully charge before I could initiate a hard reset.
Some time after that the camera disapeared and media player started when camera button pressed. Camera missing from programs. Battery discharged at an alarming rate, you could watch it go flat!!!
Soft reset same problem
Hard reset and started running in corporate mode. All fine.
TT5 installed and it works fine although the it takes ages to find the GPS and sats compared with TT3. Same cables, gps and XDA, It also 'looses' signal where it didn't with TT3 and that is with two setups different cars. Almost as if the set up has gone deaf.
Camera disapeared again and battery going flat.
Hard reset
Camera goes again, this time I track it down to the windows folder and copy/paste the shortcut to programs.
Works for a bit then goes (battery ok now)
repaste it, it goes again
Hard reset all working fine.
worked well for a few weeks then I got a Jabra BT205.
Paired great, worked with TT5 great, calls great.
Then it stopped working with the phone, no TX/RX audio via BT205 just clicking. Tried soft boot, dropped all the pairings, re paired still no good.
Hard reset and its al back fine, headset ok TT5 ok (still deaf)
THEN I find I can recieve text messages, can reply BUT when I go New Text or click on messages it wont open, screen flashes and does nothing. nothing is shown as running in the memory bit. So I cant initiate a text message.
Hard reset and the same problem with texts, but now it will only get 75% of my address book from the back up. try to active sync to get the rest and it says it has done it but hasn't.
Hard reset again, still same problem with texts but gets all the address book from the backup. NOW it will only active sync as a guest.
I cant get it to do a full named sync.
Should I just take it back under warranty??
If you are going to suggest I do updates then great Ill do em BUT please talk me through them, post working links where I can get them. I just want it to work properly. I haven't got the time to continue to mess around with the thing. I need it to work, be reliable in doing what I want of it. Be a phone, be a camera, run TT5, run word and excel. Then it would be nice if I could be like others on here who have got em working. Have a film or some comedy on the SD card for the times when I have a moment to spare, even install some other software and games.
I want to do that but not continue to waste my time with unreliability, resets and the frustration of not being able to use it when a life is at risk!!
Thanks in advance
ARRGGHHH
Thanks for reading...... please help!!!!!
I have it running, address book ok, TT5 OK, programs run OK, BUT can't active sync as it will only come up as guest on my PC and I still can't initiate the messaging part ie MMS or Text.
I would try running it without any additional software. If it still displays this strange behaviour I would definitely return it for a replacement.
sounds like you have a faulty one to me try upgradeing the rom to the current image and for the gprs setting etc for o2 the a cab file somewhere on here that will install the settings for you do the upgrade and see how that goes if it still plays up then send it back
I would download the latest ROM from the O2 site and flash that and see if there is any improvement.
http://www.my-xda.com/xda2i_soft.html
ohhh
Thanks for that. I hope it's going to sort me out. How long have they been on the site?? Im sure I only checked the other day (but the way time's flying for my that could have been 2 months ago!!!)
ohhhh
well I have only soft reset once since the upgrade!!!! but that was when I was trying to switch between text message and readingthe setting to text the otherhalf

Missing all of programs since active sync

I have had my o2 Mini for a week now and last night tried to active sync with the computer for the first time, it all seemed to go ok and then the phone turned off when i turned it back on i just have the phone and messaging services available to me.
All of the other programs have gone so when you tap on the windows icon top left all that is there is TODAY and COLDINIT nothing else i have tried to hard reset and this has done nothing......So i have searched on here but i most find info about phone totally not working and about flashing rom is this what i need to do?
I also cannot get sync to work anymore, is this a problem i need to take it back to the car phone warehouse and get a new one?
Hoping that someone can help a very stuck newbie.
Nick
All fixed now no problems for a while now i hope

SmartDial+EtenO2ENG_2.0 Questions

I installed the SmartDial+EtenO2ENG_2.0 dialer earlier this morning. After rebooting the phone I lost my U icon and it was replaced by an E. Anyone know why this happened and if you can get it back to U? I like the look of the dialer but hate that my U icon is missing. I'll think I am on Edge speeds when I know I should be on 3G.
Also is there a way when you uninstall the dialer to keep from doing a factory reset? I had to restore my device to a previous date once I uninstalled the the dialer.
I experienced the same problem. I was able to download dialer and I love the size/functionality but my U disappeared and only E was present, even though I am in 3G area. Also, I notice that I was no longer able to use the scroll wheel to cycle through history on phone screen but actually had to press history tab to get this information. I removed the dialer program via Remove Programs on system tab and all went back to normal but again, would definitely use this dialer if it did not 'hard code' the E. One final note is that I am using the original ROM on 8525 (1.34.502.1) and I'm not sure if that is causing the issue or not...
My 8525 is also on the orginal ROM (1.34.502.1) so maybe that is the issue. I wish mine had returned back to normal after I removed it. Instead my dialer was completely blank/white and not usable. Luckily I had a backup from the day before.

strange problem with trinity

Hi guys.
A friend of mine just phoned me, he sounded desperate.
Yesterday we upgraded the TT6 to 7, apparently everything went ok (he used it yesterday afternoon and this morning).
This morning he tried to sync with the laptop interrupting the process (if i 've understood what he told me via phone).
Now the phone has stopped working like a pda, it only works as phone.
Trying to explain (i still have not seen the device), it can make calls, but programs don't start.
He sees the wm panel, can scroll the menus, but nothing happens if he taps the icons.
He tried soft reset, not working.
Since he is coming to me, hoping to find a solution, and since i don't owe a trinity but a tytn, is there any advice you can give me to help my friend (known issue or bug)?
Thanx in advance
Installed on device or on memorycard? try uninstall and softreset, look what happens.

Strange Problems with a fresh installed X1

Hello there,
i found nothing about this curiousity with my fresh installed X1. With my first X1 i thought this was temporarily, but now i got a brand new silver one (my first one got a crack) and it occurs again.
That´s my Problem:
After i finished the Installation of all Apps & made all Settings i activated my Exchange Account within ActiveSync. The phone does push & all that, but it shows a new Mail (Vibration & LED) only temporarily. Also SPB Mobile Shell 3 shows no new Mail on the Icon and SU2U the same. After a few days/weeks on my first phone it works normally. At that time i thought this happens only once and it would be a bug. But today i made a hard reset and installed & configured all new and the same happens again. If i send testmails the first one works with Vibration and LED, no mail which comes after that gives me a feedback. But the Mails are in the Postbox, that means Push works normally.
And SPB Shell shows alwasy zero Mails... Now i restored an backup of my first phone and this works, but i would like to know what kind of bug this is.
Sorry for my inconvinient English. Did anyone had/have the same Problems ?
Thanks in Advance,
Stefan

Categories

Resources