Related
I have a problem with my 8525 and cannot get it fixed no matter what ive tried. My wife was using the unit playing a game and she said a message window appeared that said something about being critically low on memory. She hit ok to close the window and it rebooted to the bootloader screen with the red/green/blue/white bars. I cannot get it to reset. Ive tried a hard reset, soft reset even tried reflashing but its just locked onto that screen. Ive tried removing the battery.
Anyone have any recommendations? Im running Custel's 2.5 pro cingular version with radio 1.40 and spl-2.10 olipro I dunno if that helps.
Thanks Weez
Anyone? or am i toast?
have u tried flashing the phone suing the micro sd card
tht might help
Did you check the TyTn Wiki section "Common Upgrade Problems?" There's a section on how to get the phone out of bootloader mode... Good luck!
I have read and read and read. I have "bricked" my phone in the past and fixed it. I have used, tested, and flashed many roms from this site (Thanks to all cooks for their work!) but I still consider myself somewhat 'new' to troubleshooting.
I woke up this morning to make some important phone calls today and as luck would have it, my phone was stalled again. It's been doing that for a few weeks now. My last flash was Open Touch 5.0 UL I believe (either that or 5.2 biggy) and it has been working great except for the occasional freeze.
EDIT: Forgot to add, the actual problem is now it won't boot up after it froze this morning. Just sits at the boot screen
So I've tried my other methods of fixing it... /edit
Except this morning nothing is working. I have tried flashing with Orig. T-mobile ruu, tried SD flashing with the RUU_signed.nbh, tried restarting the computer, phone, removing battery and sim... NOTHING! When trying the sd flash (which I've never done before today, it reads and tells me to push the down button but then goes to bootloader screen and just sits there. With the RUU I'm getting err 300 but I'm using the SAME RUU (4.10...) that I've used in the past to reflash my phone AND tried the new one (4.26...)
Possible problem: Does it matter what kind of usb cable you use? I don't have the normal one I use as I am not home but I figured usb is usb...
I've read about it being a motherboard issue, how common is this?
I've read somethings about MTTY, would this apply to me??
Please help, anyone who has any suggestion, I'll try it!!
Stats:
IPL 4.10.0002
SPL 4.10.0000
NOT hard-spl'd
Wing w/ Open Touch Project 5.0 or 5.2
actualy the sd method needs hard spl thats all i can really provide
I appretiate it, that I did not know... I could barely find anything on how to do it even.
im having the same problem bt instead of freezing da screen jus goes different colors or jus goes gray and stays der
Thats basically what mine did. The colors would get messed up and no matter what button i pressed it would not do anything. My advice to you edrift, is BACK UP YOUR STUFF NOW and reflash it asap if you can still reboot. I can get into my phone at all now.
yea i tink i might jus throw my phone away.dis is jus gettin rediculous
ok since i got this phone i have had problems,but i updated it to 6.1 and it got better (locking up all the time)then i played with a bunch of custom roms,then the other day it just decided not to turn on at all,before it would just lock up at the htc screen,now when i turn it on the green light is on and nothing happnes?? i force it in the loader screen and have tryed getting it to take a rom that way and it just gets stuck and says loading but dosnt do anything? the update utilitly does not work either it keeps saying image is currupt?
Welcome to forums
Have a deep read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
Hope it helped and good luck,
What version bootloader do you have? What image are you trying to load in bootloader.
i have opilo_240. i cant load any image nothing will take,no roms no radio no nothing
Are you sure you are naming it correctly and on a 2GB or less FAT32 sd card.
i have tryed it a million times, yes i have been typing it right.it recognizes it and starts to load it but then locks up. is there a way i can get this loader off the phone and take it back to original? maybe the loader is crap so if i try and put a original loader back in it will take a install again but i cant find any thing
Not possible that I know of to change bootloader without softspl which needs WM to run.
Where are you getting these images? What is your provider. Please update this in your profile so we can help easier.
my provider is metro pcs but its a sprint phone,i have tryed the sprint/htc 6.1 update then i tryed a couple of ryan mogul 6.5 roms.see since i got this phone (used) it had problems loading from the htc screen,sometimes i would have to soft reset about 5 times before it would load the o/s then sometimes it would go days without a problem,it did this with the stock image then got better with the 6.1 and thought it was good then i played with a couple roms and they all loaded ok but the phone was getting worse when locking up it would do it all the time,then i went back to the 6.1 sprint rom and it didnt get better just worse,then it wouldnt get past the htc screen,so i tryed again to put back to stock and now when i turned the phone on it vibrates then just the green light turns on,when i try and hard reset it just instantly says complete,i can boat to loader and connect to pc fine but when i try and load a image from cpu it goes to 1% then stops and says image file is corrupt, is my phone junk? i have a brand new touch pro coming today but i would like to get this mogul up and running its just a shame cause i loved this phone when it worked,im ready to throw it in the garbage
Get the .nbh from the following sprint .exe and try it on the sd card. If you can get into bootloader your phone shouldnt be a brick. Mtty might be an option but that isnt something I can teach you how to do very well.
ftp://ppcgeeks.com/Titan/CarrierRom..._RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship.exe
Hello,
I have a problem, when I connect my phone with the USB cable to my computer, it doesn't do anything. He don't recognize the phone, doesn't make any connection nor see the SD card.
I've already tried to clear the box: Enable faster data synchronization, and tried to choose Disk Drive (Faster file transfer), it all doesn't do anything.
Tried different PC's, with WMC and Active Sync 4.5, with different OS's.
The cable isn't broker or something because the only thing that happens when I connect the phone with my PC is that the orange light (battery charge) is on.
I've installed Shadowline ROM, but it did work with that rom (active sync and disk transfer).
I think it is a problem of the ROM tho, so is there any way to flash my ROM without using a PC?
Answers would be realy appreciated.
Thank you.
nzane said:
Hello,
I have a problem, when I connect my phone with the USB cable to my computer, it doesn't do anything. He don't recognize the phone, doesn't make any connection nor see the SD card.
I've already tried to clear the box: Enable faster data synchronization, and tried to choose Disk Drive (Faster file transfer), it all doesn't do anything.
Tried different PC's, with WMC and Active Sync 4.5, with different OS's.
The cable isn't broker or something because the only thing that happens when I connect the phone with my PC is that the orange light (battery charge) is on.
I've installed Shadowline ROM, but it did work with that rom (active sync and disk transfer).
I think it is a problem of the ROM tho, so is there any way to flash my ROM without using a PC?
Answers would be realy appreciated.
Thank you.
Click to expand...
Click to collapse
You can flash from the storage card, just rename the .nbh file to TOPAIMG.nbh and put on the root of your storage card, go to bootloader mode and it will flash.
Your cable can be bad and still charge. I would try a different cable.
Also try deleteing the partnership in Active Sync and try to reestablish it.
I assume you hard reset after you flashed the ROM.
I do not think its a ROM issue.
Ok thanks for your reply.
I did what you sad but when I loaded the TOPAIMG.nbh in the bootloader, it came up with an error and freezes on: Loading ...
When I restarted it It Only shows:
___________________________
RUUNBH
TOPA100 32M
SPL-1.83.000
MicroP-Topaz (LED) v10
TURBO HW/TURBO SW
TP MFG DATA
510,547 180,883
177,209 842,207
844,844 Calibrated
Upgrade ROM code Error
Please try again
_______________________________
And then he goes to the white screen with the blue letters saying: Loading...
(I waited many times, one time for 2 hours but nothing happend).
When I put out my SD-card and the battery and connect the phone with the USB (my pc still don't see recognize anything) it will boot to the exact same screen as I typed here above but then he stays at that one.
I can't do anything, already tried to hard reset him but that also didn't work.
It feels like im pretty screwed..
Please help!
Maybe you have a problem with the mini USB.
Happen to me with Touch HD.
If so take it to a reppair shop.
Well, I borrowed and USB cable from my friend and now he indeed makes an connection. But no active sync connection. I also can't see my SD card in My Computer. He still only shows the screen that I typed here above, but then under in the white area a little text: USB
What do I have to do next to fix it,
please help
thanks
nzane said:
Well, I borrowed and USB cable from my friend and now he indeed makes an connection. But no active sync connection. I also can't see my SD card in My Computer. He still only shows the screen that I typed here above, but then under in the white area a little text: USB
What do I have to do next to fix it,
please help
thanks
Click to expand...
Click to collapse
I am concerned that you screen shot shows SPL 1.83.00, but you have flashed Shadowline's ROM.
It should say SPL: 1.83.00Olinex which would mean you have HSPL installed which is absolutely required to flash a custom ROM.
Did you have that ROM operational and just couldn't sync, or has the device not worked since you flashed this ROM?
Yes, I had the shadowline ROM, and it al worked good. I also could connect my mobile to my pc with the USB cable.
I don't know what happend, I didn't install any other program or something else but I suddently couldn't connect my mobile phone to my pc anymore.
But I wanted another ROM because I noticed that the Shadowline ROM feld a little bit laggy, so I found out that you can do that by your booting with the SD card.
And I know that you have to install hardSPL first, so I downloaded that one from the big post in this ROM forum from Topaz.
Booted with the SD card, and then when I started to flash the ROM he gave an error and now I have to problem that I can't do anything anymore.
nzane said:
Yes, I had the shadowline ROM, and it al worked good. I also could connect my mobile to my pc with the USB cable.
I don't know what happend, I didn't install any other program or something else but I suddently couldn't connect my mobile phone to my pc anymore.
But I wanted another ROM because I noticed that the Shadowline ROM feld a little bit laggy, so I found out that you can do that by your booting with the SD card.
And I know that you have to install hardSPL first, so I downloaded that one from the big post in this ROM forum from Topaz.
Booted with the SD card, and then when I started to flash the ROM he gave an error and now I have to problem that I can't do anything anymore.
Click to expand...
Click to collapse
I guess my point was if you had Shadowlines ROM, you were already HSPL'd, no need to do again.
Hard reset the phone and try to install ROM from SD.
Hi,
i had once the same problem. No connection with PC anywhere. I couldnt do nothing with that and was quite desperate about that.
But once suddenly it came to work again. I am not sure what made it work again but the only thing I can guess was that I took out and gave back the memory card with the turned on phone. Since then I have never had this problem again.
I wish you that this taking out of memory card helped you too.
Well, If I'm hard resetting, the only thing he does is show the percentages, then he says completed, then he reboot en I'm back at the tri-color screen again.
And I can't enter the bootloader, so I also can't install the ROM from the Sd-card.
And taking out the memory card while the phone is on also dont work
Any other options what maby will work?
nzane said:
Well, If I'm hard resetting, the only thing he does is show the percentages, then he says completed, then he reboot en I'm back at the tri-color screen again.
And I can't enter the bootloader, so I also can't install the ROM from the Sd-card.
And taking out the memory card while the phone is on also dont work
Any other options what maby will work?
Click to expand...
Click to collapse
Just some points;
Make sure the .nbh file is named excatly TOPAIMG.nbh paying attention to the case of the letters.
When you attempt to go into Bootloader, Holding Voume Down and Power buttons at the same time when phone is off, what screen appears?
[Q] my handset doesn´t recognize sd apps
I had the same problem as well, so I deactivated and reactivated the SD card from the phone, actually I cant take out the sd with the turned on phone. It worked once, but it happened again so i tried to the same but know the deactivate function in settings doesnt worked. Now i dont know what to do. if anyone could help me i would be very thankful.
My handset is a xperia x10 with 2.1 generic flashed bb 2.1.54, and 2.2 wolbreak gingerbread rom.
eiffeltom said:
Hi,
i had once the same problem. No connection with PC anywhere. I couldnt do nothing with that and was quite desperate about that.
But once suddenly it came to work again. I am not sure what made it work again but the only thing I can guess was that I took out and gave back the memory card with the turned on phone. Since then I have never had this problem again.
I wish you that this taking out of memory card helped you too.
Click to expand...
Click to collapse
For several days I get tired of uploading windows 7 on your phone hd2. The first time everything went smoothly, but broken marketplace forced me to install another rom ... and after that began to complications. Reinstalling WP7 ran smoothly, unfortunately after the restart, the phone hung up on the screen where you had to enter the PIN code, the screen does not respond to touch. After reset, the message began to appear that the memory card does not work and could not turn on the system. Again I tried to upload the new rom, but unfortunately it did not help ... Later I was able to upload back android nand and somehow everything worked. Today I made another attempt to install WP7, unfortunately, only worsened his situation, which is as follows:
The phone will not even turn on, just as I plug it into usb. MAGLDR loads seamlessly, this 4-color screen as well. Unfortunately, the system loads until the htc logo appears and some animation, after that the phone automatically resets and so on.
Check and make sure you do not have a bent battery pin as a bent battery pin has been known to cause the HD2 to boot loop like you are describing.
If you do not have a bent battery pin, then I suggest you run a Task 29 and then re install MAGLDR then reflash your WP7 ROM. Also it might help if you do a total reformat of your SD card then try to boot your device with a freshly formated SD card. I know I know WP7 formats your card anyway on first boot but hey it could help. If you still have troubles after that I suggest you get a new SD card and try that. You see if your SD card does not work WP7 will not boot cause it uses the SD card as the internal memory for the device.
I don't know how, but now everything is working! I didn't do enything! Just plug usb cable, and system was loaded! I disconnect cable and it still working?!
flamner said:
I don't know how, but now everything is working! I didn't do enything! Just plug usb cable, and system was loaded! I disconnect cable and it still working?!
Click to expand...
Click to collapse
Hmmmmm that is odd. At least it is working again. One question though, have you tried to power of and power back on you HD2?
T-Macgnolia said:
Hmmmmm that is odd. At least it is working again. One question though, have you tried to power of and power back on you HD2?
Click to expand...
Click to collapse
Many times.. Erlier it didn't help..
flamner said:
Many times.. Erlier it didn't help..
Click to expand...
Click to collapse
No I mean have you tried powering it on and off since it has started working again?
Yes, now i can restart the phone, and everything works properly. I don't know how it is possible..? For now I stay with android, I will wait for better version of wp7 rom for hd2.