For several days I get tired of uploading windows 7 on your phone hd2. The first time everything went smoothly, but broken marketplace forced me to install another rom ... and after that began to complications. Reinstalling WP7 ran smoothly, unfortunately after the restart, the phone hung up on the screen where you had to enter the PIN code, the screen does not respond to touch. After reset, the message began to appear that the memory card does not work and could not turn on the system. Again I tried to upload the new rom, but unfortunately it did not help ... Later I was able to upload back android nand and somehow everything worked. Today I made another attempt to install WP7, unfortunately, only worsened his situation, which is as follows:
The phone will not even turn on, just as I plug it into usb. MAGLDR loads seamlessly, this 4-color screen as well. Unfortunately, the system loads until the htc logo appears and some animation, after that the phone automatically resets and so on.
Check and make sure you do not have a bent battery pin as a bent battery pin has been known to cause the HD2 to boot loop like you are describing.
If you do not have a bent battery pin, then I suggest you run a Task 29 and then re install MAGLDR then reflash your WP7 ROM. Also it might help if you do a total reformat of your SD card then try to boot your device with a freshly formated SD card. I know I know WP7 formats your card anyway on first boot but hey it could help. If you still have troubles after that I suggest you get a new SD card and try that. You see if your SD card does not work WP7 will not boot cause it uses the SD card as the internal memory for the device.
I don't know how, but now everything is working! I didn't do enything! Just plug usb cable, and system was loaded! I disconnect cable and it still working?!
flamner said:
I don't know how, but now everything is working! I didn't do enything! Just plug usb cable, and system was loaded! I disconnect cable and it still working?!
Click to expand...
Click to collapse
Hmmmmm that is odd. At least it is working again. One question though, have you tried to power of and power back on you HD2?
T-Macgnolia said:
Hmmmmm that is odd. At least it is working again. One question though, have you tried to power of and power back on you HD2?
Click to expand...
Click to collapse
Many times.. Erlier it didn't help..
flamner said:
Many times.. Erlier it didn't help..
Click to expand...
Click to collapse
No I mean have you tried powering it on and off since it has started working again?
Yes, now i can restart the phone, and everything works properly. I don't know how it is possible..? For now I stay with android, I will wait for better version of wp7 rom for hd2.
Related
Hello,
I have a problem, when I connect my phone with the USB cable to my computer, it doesn't do anything. He don't recognize the phone, doesn't make any connection nor see the SD card.
I've already tried to clear the box: Enable faster data synchronization, and tried to choose Disk Drive (Faster file transfer), it all doesn't do anything.
Tried different PC's, with WMC and Active Sync 4.5, with different OS's.
The cable isn't broker or something because the only thing that happens when I connect the phone with my PC is that the orange light (battery charge) is on.
I've installed Shadowline ROM, but it did work with that rom (active sync and disk transfer).
I think it is a problem of the ROM tho, so is there any way to flash my ROM without using a PC?
Answers would be realy appreciated.
Thank you.
nzane said:
Hello,
I have a problem, when I connect my phone with the USB cable to my computer, it doesn't do anything. He don't recognize the phone, doesn't make any connection nor see the SD card.
I've already tried to clear the box: Enable faster data synchronization, and tried to choose Disk Drive (Faster file transfer), it all doesn't do anything.
Tried different PC's, with WMC and Active Sync 4.5, with different OS's.
The cable isn't broker or something because the only thing that happens when I connect the phone with my PC is that the orange light (battery charge) is on.
I've installed Shadowline ROM, but it did work with that rom (active sync and disk transfer).
I think it is a problem of the ROM tho, so is there any way to flash my ROM without using a PC?
Answers would be realy appreciated.
Thank you.
Click to expand...
Click to collapse
You can flash from the storage card, just rename the .nbh file to TOPAIMG.nbh and put on the root of your storage card, go to bootloader mode and it will flash.
Your cable can be bad and still charge. I would try a different cable.
Also try deleteing the partnership in Active Sync and try to reestablish it.
I assume you hard reset after you flashed the ROM.
I do not think its a ROM issue.
Ok thanks for your reply.
I did what you sad but when I loaded the TOPAIMG.nbh in the bootloader, it came up with an error and freezes on: Loading ...
When I restarted it It Only shows:
___________________________
RUUNBH
TOPA100 32M
SPL-1.83.000
MicroP-Topaz (LED) v10
TURBO HW/TURBO SW
TP MFG DATA
510,547 180,883
177,209 842,207
844,844 Calibrated
Upgrade ROM code Error
Please try again
_______________________________
And then he goes to the white screen with the blue letters saying: Loading...
(I waited many times, one time for 2 hours but nothing happend).
When I put out my SD-card and the battery and connect the phone with the USB (my pc still don't see recognize anything) it will boot to the exact same screen as I typed here above but then he stays at that one.
I can't do anything, already tried to hard reset him but that also didn't work.
It feels like im pretty screwed..
Please help!
Maybe you have a problem with the mini USB.
Happen to me with Touch HD.
If so take it to a reppair shop.
Well, I borrowed and USB cable from my friend and now he indeed makes an connection. But no active sync connection. I also can't see my SD card in My Computer. He still only shows the screen that I typed here above, but then under in the white area a little text: USB
What do I have to do next to fix it,
please help
thanks
nzane said:
Well, I borrowed and USB cable from my friend and now he indeed makes an connection. But no active sync connection. I also can't see my SD card in My Computer. He still only shows the screen that I typed here above, but then under in the white area a little text: USB
What do I have to do next to fix it,
please help
thanks
Click to expand...
Click to collapse
I am concerned that you screen shot shows SPL 1.83.00, but you have flashed Shadowline's ROM.
It should say SPL: 1.83.00Olinex which would mean you have HSPL installed which is absolutely required to flash a custom ROM.
Did you have that ROM operational and just couldn't sync, or has the device not worked since you flashed this ROM?
Yes, I had the shadowline ROM, and it al worked good. I also could connect my mobile to my pc with the USB cable.
I don't know what happend, I didn't install any other program or something else but I suddently couldn't connect my mobile phone to my pc anymore.
But I wanted another ROM because I noticed that the Shadowline ROM feld a little bit laggy, so I found out that you can do that by your booting with the SD card.
And I know that you have to install hardSPL first, so I downloaded that one from the big post in this ROM forum from Topaz.
Booted with the SD card, and then when I started to flash the ROM he gave an error and now I have to problem that I can't do anything anymore.
nzane said:
Yes, I had the shadowline ROM, and it al worked good. I also could connect my mobile to my pc with the USB cable.
I don't know what happend, I didn't install any other program or something else but I suddently couldn't connect my mobile phone to my pc anymore.
But I wanted another ROM because I noticed that the Shadowline ROM feld a little bit laggy, so I found out that you can do that by your booting with the SD card.
And I know that you have to install hardSPL first, so I downloaded that one from the big post in this ROM forum from Topaz.
Booted with the SD card, and then when I started to flash the ROM he gave an error and now I have to problem that I can't do anything anymore.
Click to expand...
Click to collapse
I guess my point was if you had Shadowlines ROM, you were already HSPL'd, no need to do again.
Hard reset the phone and try to install ROM from SD.
Hi,
i had once the same problem. No connection with PC anywhere. I couldnt do nothing with that and was quite desperate about that.
But once suddenly it came to work again. I am not sure what made it work again but the only thing I can guess was that I took out and gave back the memory card with the turned on phone. Since then I have never had this problem again.
I wish you that this taking out of memory card helped you too.
Well, If I'm hard resetting, the only thing he does is show the percentages, then he says completed, then he reboot en I'm back at the tri-color screen again.
And I can't enter the bootloader, so I also can't install the ROM from the Sd-card.
And taking out the memory card while the phone is on also dont work
Any other options what maby will work?
nzane said:
Well, If I'm hard resetting, the only thing he does is show the percentages, then he says completed, then he reboot en I'm back at the tri-color screen again.
And I can't enter the bootloader, so I also can't install the ROM from the Sd-card.
And taking out the memory card while the phone is on also dont work
Any other options what maby will work?
Click to expand...
Click to collapse
Just some points;
Make sure the .nbh file is named excatly TOPAIMG.nbh paying attention to the case of the letters.
When you attempt to go into Bootloader, Holding Voume Down and Power buttons at the same time when phone is off, what screen appears?
[Q] my handset doesn´t recognize sd apps
I had the same problem as well, so I deactivated and reactivated the SD card from the phone, actually I cant take out the sd with the turned on phone. It worked once, but it happened again so i tried to the same but know the deactivate function in settings doesnt worked. Now i dont know what to do. if anyone could help me i would be very thankful.
My handset is a xperia x10 with 2.1 generic flashed bb 2.1.54, and 2.2 wolbreak gingerbread rom.
eiffeltom said:
Hi,
i had once the same problem. No connection with PC anywhere. I couldnt do nothing with that and was quite desperate about that.
But once suddenly it came to work again. I am not sure what made it work again but the only thing I can guess was that I took out and gave back the memory card with the turned on phone. Since then I have never had this problem again.
I wish you that this taking out of memory card helped you too.
Click to expand...
Click to collapse
Hello all i have bought a new HTC HD2 phone 3 weeks ago and my friend put a new rom on it for me.
Everything was working fine till i put some foto's and music on the storage card, and i wanted to look and listen to them put suddenly i had nothing else on the storage card, everything was deleted.
And everytime when i turn my phone on i got a popup menu saying that i have to format the storage card, and my pc does not recconize anymore the disc drive, before it worked always perfectly.
So i formatted the starage card but the problem still exists.
I am realy very sad now and this is my last helpline, so i hope somebody can help me here with my problem.
Thanks already.
And i hope someone will have an answer for me.
Greetings Edwin
edwin45 said:
Hello all i have bought a new HTC HD2 phone 3 weeks ago and my friend put a new rom on it for me.
Everything was working fine till i put some foto's and music on the storage card, and i wanted to look and listen to them put suddenly i had nothing else on the storage card, everything was deleted.
And everytime when i turn my phone on i got a popup menu saying that i have to format the storage card, and my pc does not recconize anymore the disc drive, before it worked always perfectly.
So i formatted the starage card but the problem still exists.
I am realy very sad now and this is my last helpline, so i hope somebody can help me here with my problem.
Thanks already.
And i hope someone will have an answer for me.
Greetings Edwin
Click to expand...
Click to collapse
Have you tried to re-install the rom or install another?
Can transfer to phone via blue tooth or network considering your SD card isn't working.
try a hard reset mate might do the trick, it will just reset the phone to when the ROM was first put on the phone, restart the device before it boots push down volume up & down at the same time just follow instructions
i also got this problem with my memory card
phone issue?
i just put a android 2.33 rom on my hd2 and the phone wont work? is there something i can do? please advise.
peteamaro86 said:
i just put a android 2.33 rom on my hd2 and the phone wont work? is there something i can do? please advise.
Click to expand...
Click to collapse
Try bringing up MAGLDR by turn your HD2 off and then turn it back on but keep the power(end) button down and MAGLDR will come up then use hour volume up and down button to to scroll through the options. There is a recovery option select it and it will do what is equal to a hard reset of the Andriod on your phone. If this does not work try reflashing the Andriod ROM if still no Chang try another Andriod ROM. If still no dice out your Pbone into bootloader by turning it off and then teurning it back on but hold the volume down button when you tap the power button and keep holing it down until bootloader comes up once it is up plug your USB ito the computer and phone and wait until serial changes to USB in the white bar at the bottom of the screen and then flash a custom Windows Mobile ROM to your HD2. I say custom cause a official rom will wipe MAGLDR from your phone. Do not flash a official rom, especially don't flash a official ROM from your SD card as it will take wipe MAGLDR and revert your HSPL to SPL and then you will be back to complete stick and square one.
T-Macgnolia said:
Try bringing up MAGLDR by turn your HD2 off and then turn it back on but keep the power(end) button down and MAGLDR will come up then use hour volume up and down button to to scroll through the options. There is a recovery option select it and it will do what is equal to a hard reset of the Andriod on your phone. If this does not work try reflashing the Andriod ROM if still no Chang try another Andriod ROM. If still no dice out your Pbone into bootloader by turning it off and then teurning it back on but hold the volume down button when you tap the power button and keep holing it down until bootloader comes up once it is up plug your USB ito the computer and phone and wait until serial changes to USB in the white bar at the bottom of the screen and then flash a custom Windows Mobile ROM to your HD2. I say custom cause a official rom will wipe MAGLDR from your phone. Do not flash a official rom, especially don't flash a official ROM from your SD card as it will take wipe MAGLDR and revert your HSPL to SPL and then you will be back to complete stick and square one.
Click to expand...
Click to collapse
Thanks! It works now!
stock tmous hd2
flashed .12 radio rom
formatted sd card
installed energy 21683 sense 2.5 cookie (not the 2.0 version)
ran fine.
copied mdeejay v2.3 evosense revolution as follows to root on SD card
- android\(lots of files
- data_512\img
- data_1024\img
inserted sd card, powered up, file commander, ran clrcad.exe, then haret.exe
got to htc boot screen. took what felt like longer than it should. pulled the battery (doh!)
reinserted battery and phone was unresponsive.
tried to do hard reset, nothing
plug in usb cable and now phone boots to NRG boot screen shows R,G,D text at bottom, shuts down and then restarts the cycle. It never moves past boot screen and keeps cycling.
W/ usb cable plugged in I was able to do hard reset. didn't help.
W/ usb cable plugged in I was able to get to boot loader screen, ran NRG installer.exe and reinstalled NRG. (installer seemed to think everything went fine) still didn't help.
So my phone is now stuck, won't power on w/o usb cable and when I plug in usb cable, it cycles between boot screen and off.
help. tia
batchman0002 said:
stock tmous hd2
flashed .12 radio rom
formatted sd card
installed energy 21683 sense 2.5 cookie (not the 2.0 version)
ran fine.
copied mdeejay v2.3 evosense revolution as follows to root on SD card
- android\(lots of files
- data_512\img
- data_1024\img
inserted sd card, powered up, file commander, ran clrcad.exe, then haret.exe
got to htc boot screen. took what felt like longer than it should. pulled the battery (doh!)
reinserted battery and phone was unresponsive.
tried to do hard reset, nothing
plug in usb cable and now phone boots to NRG boot screen shows R,G,D text at bottom, shuts down and then restarts the cycle. It never moves past boot screen and keeps cycling.
W/ usb cable plugged in I was able to do hard reset. didn't help.
W/ usb cable plugged in I was able to get to boot loader screen, ran NRG installer.exe and reinstalled NRG. (installer seemed to think everything went fine) still didn't help.
So my phone is now stuck, won't power on w/o usb cable and when I plug in usb cable, it cycles between boot screen and off.
help. tia
Click to expand...
Click to collapse
Have you tried taking out your SD-card, then doing a hard reset?
Have you tried backing up the things you created (don't worry about things that other programs like Android created) on your SD-card, then reformatting it? Then restoring the stuff you backed up, and re-doing the Android install?
thanks for response.
hard reset w/ sd card in and out. no difference.
formatted sd card.
can reinstall android files on it but seems pointless since i can't get to winmo to run them. can't get past winmo boot screen.
thinking i should try going to bootloader screen then reflash stock tmous rom? if that works can always come back the other way? thoughts?
batchman0002 said:
thanks for response.
hard reset w/ sd card in and out. no difference.
formatted sd card.
can reinstall android files on it but seems pointless since i can't get to winmo to run them. can't get past winmo boot screen.
thinking i should try going to bootloader screen then reflash stock tmous rom? if that works can always come back the other way? thoughts?
Click to expand...
Click to collapse
You could run a Task29 -- a utility that clears your ROM and flashes a "blank" ROM. This is one of the remedies for unusual behavior. After Task29, reflash your custom ROM.
Otherwise, yes, you could try reflashing a stock ROM. If that still fails, then I would call this a brick/"hardware issue".
Good luck!
yep. it's bricked. unless anyone else has better idea.
task29 back to NRG didn't work
flash to stock rom downloaded from Tmo website didn't work either. (now it dies at the tmo pink stick together screen just after showing the R,G,B text. and begins the cycle.)
this is so sad. I need to figure out what i did otherwise not likely to pick up another hd2. figured it was cheaper way to get decent hardware (save 100$ or more right now on craigslist over galaxyS.) and have option to play w/ winphone7.
does android normally take a long time to boot on first try? if i wasn't after the apps and google integration, i might have been happy w/ nrg rom. it looked sharp and seemed to run quick for the little time i played w/ it.
sucks i gave my wife my galaxy s (w/o a dataplan on her line) so she could have nice phone for texting/pics/vid/facebook etc while at home through wifi. now i've got to renig on that gift or get her to trust me w/ another phone!!!
just sucks all the way around. darnit!
batchman0002 said:
yep. it's bricked. unless anyone else has better idea.
task29 back to NRG didn't work
flash to stock rom downloaded from Tmo website didn't work either. (now it dies at the tmo pink stick together screen just after showing the R,G,B text. and begins the cycle.)
this is so sad. I need to figure out what i did otherwise not likely to pick up another hd2. figured it was cheaper way to get decent hardware (save 100$ or more right now on craigslist over galaxyS.) and have option to play w/ winphone7.
does android normally take a long time to boot on first try? if i wasn't after the apps and google integration, i might have been happy w/ nrg rom. it looked sharp and seemed to run quick for the little time i played w/ it.
sucks i gave my wife my galaxy s (w/o a dataplan on her line) so she could have nice phone for texting/pics/vid/facebook etc while at home through wifi. now i've got to renig on that gift or get her to trust me w/ another phone!!!
just sucks all the way around. darnit!
Click to expand...
Click to collapse
Here's another idea (this actually happened to someone before):
Look at the battery contacts (the pins) shooting out of the phone when the battery is not inserted. Are they bent in any way? If they are, bend them gently back into place so that they are completely straight. The pins are delicate, and since you took off your battery, there's a possibility you accidentally bent them. This would lead to random shut-downs/resets.
It might be crazy enough to be the problem you have...
But you know, you could get the HD2 replaced for free, as long as you are under T-Mo's 1-yr warranty -- claim a hardware defect that couldn't be solved by the upgrade ROM. At least it's free!
Hallellujah!!! Stupid pins on the battery!!!!! THIS SHOULD BE a footnote for the newbies in the flashing sticky!
Thanks for the awesome advice!!!! I'm so glad that was the problem.
batchman0002 said:
Hallellujah!!! Stupid pins on the battery!!!!! THIS SHOULD BE a footnote for the newbies in the flashing sticky!
Thanks for the awesome advice!!!! I'm so glad that was the problem.
Click to expand...
Click to collapse
hi MATE,
The main problem is in Android folder
i'd suggest you to get the Build that asks you to copy n paste all files of Android folder to ur SD Root, that way u'll have all files on ur sd card.
2nd now wen ever you want to boot ur android of WWE all you got to do is DELETE ANDROID folder thats located on ur SD card, I had same issue as you because i test roms and i love messing with them.
3rd: You dont need to hard reset or soft reset if you needed to reboot ur Android (once its running) all you need is hold Power off button u'll get the reboot option as u select the reboot it will show you few rebot options there you gotta choose HOT Reboot that will restart the ANDROID only and that way you u can save ur self from going thur long painful process and yet stay in android os.
PS: i am currently testing the build that asks where i have all file inside ANDROID files and image @ my SD Root, i have same issue with this one but lets see if we could figure out the real culprit.
Hope this help, Feel free to share your experiences
supermaster said:
hi MATE,
The main problem is in Android folder
i'd suggest you to get the Build that asks you to copy n paste all files of Android folder to ur SD Root, that way u'll have all files on ur sd card.
2nd now wen ever you want to boot ur android of WWE all you got to do is DELETE ANDROID folder thats located on ur SD card, I had same issue as you because i test roms and i love messing with them.
3rd: You dont need to hard reset or soft reset if you needed to reboot ur Android (once its running) all you need is hold Power off button u'll get the reboot option as u select the reboot it will show you few rebot options there you gotta choose HOT Reboot that will restart the ANDROID only and that way you u can save ur self from going thur long painful process and yet stay in android os.
PS: i am currently testing the build that asks where i have all file inside ANDROID files and image @ my SD Root, i have same issue with this one but lets see if we could figure out the real culprit.
Hope this help, Feel free to share your experiences
Click to expand...
Click to collapse
The OP's problem was that he took out his battery while Android was loading, and when he put back the battery, his phone could not boot into WM.
I guess my last thought was correct -- the battery pins were accidentally bent while the OP took out the battery.
This phone has been giving me hell for a really long time.
In short; it don't work. It will flash but will never boot right.
When I got my HD2 it had the stock WinMo 6.5.3 ROM that worked perfectly. I played with booting Android off my flash drive but got the fast audio problem. So I flashed ChuckyDroidROM, and used that for a month with some different Android builds, all worked fairly well.
But then one day, it started crashing after a while of use. Sometimes it would just not let me unlock it, and other times it completely crashes and restarts. Every time it happened earlier and earlier after booting.
So I tried Task29 and putting the stock ROM back on it, no go. It crashes right after it boots.
Now I've flashed HSPL 2.08.HSPL, Radio 2.15.50.14, and MAGLDR 1.12. I'm trying to flash WP7 to it, but since the MAGLDR menu doesn't show up, I can't flash anything.
It boots into MAGLDR, but just shows "aMAGLDR V1.12, Build: 12 2011 XX:XX:XX, by Cotulla 2011" but nothing else. The menu doesn't show up, but it did once....
Any ideas? I'm desperate. I'm about to blow it up....
EDIT: Now it won't even f**king turn on!!!! And yes the battery is FULL
I'm having an issue with my HD2 also (even though I've flashed it successfully several times) so this sounds like a very, very isolated issue. The problem I'm having - disabled phone functions in WP7 - also appears to be an isolated issue. Sometimes these things can be the result of a bad flash. Give this thread a week. You're in the right place.
AutoItKing said:
This phone has been giving me hell for a really long time.
In short; it don't work. It will flash but will never boot right.
When I got my HD2 it had the stock WinMo 6.5.3 ROM that worked perfectly. I played with booting Android off my flash drive but got the fast audio problem. So I flashed ChuckyDroidROM, and used that for a month with some different Android builds, all worked fairly well.
But then one day, it started crashing after a while of use. Sometimes it would just not let me unlock it, and other times it completely crashes and restarts. Every time it happened earlier and earlier after booting.
So I tried Task29 and putting the stock ROM back on it, no go. It crashes right after it boots.
Now I've flashed HSPL 2.08.HSPL, Radio 2.15.50.14, and MAGLDR 1.12. I'm trying to flash WP7 to it, but since the MAGLDR menu doesn't show up, I can't flash anything.
It boots into MAGLDR, but just shows "aMAGLDR V1.12, Build: 12 2011 XX:XX:XX, by Cotulla 2011" but nothing else. The menu doesn't show up, but it did once....
Any ideas? I'm desperate. I'm about to blow it up....
EDIT: Now it won't even f**king turn on!!!! And yes the battery is FULL
Click to expand...
Click to collapse
When your rebooting and the splash screen shows up are you holding down the power button to gain access to magldr options?
Sent from my HTC HD2 using XDA App
Did you took out your SD card? If no, take it out, try turn it on. If you can reach the boot (means the multicolors menu) than your good to flash.
I have the feeling that might be because of damaged SD card (similar issue I had). Hope that helps.
Good luck!
jvillejoe said:
When your rebooting and the splash screen shows up are you holding down the power button to gain access to magldr options?
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Yes I am. It showed up today, and I was able to flash WP7 to the device, but now it will not boot into WP. It freezes at MAGLDR, no options.
sebacu said:
Did you took out your SD card? If no, take it out, try turn it on. If you can reach the boot (means the multicolors menu) than your good to flash.
I have the feeling that might be because of damaged SD card (similar issue I had). Hope that helps.
Good luck!
Click to expand...
Click to collapse
I can flash anything I want, it just never boots, or it boots and then crashes immediately. I have tried with and without my SD card/SIM card.
Wow it seems as if your doing every thing right. My suggestion is, Re-flash the stock Rom that came with the phone, Revert back to the original radio and spl. Call your sevice provider for a replacment phone as it sounds like its defective. Thats what i would do.
AutoItKing said:
Yes I am. It showed up today, and I was able to flash WP7 to the device, but now it will not boot into WP. It freezes at MAGLDR, no options.
I can flash anything I want, it just never boots, or it boots and then crashes immediately. I have tried with and without my SD card/SIM card.
Click to expand...
Click to collapse
Go into Bootloader Flash a Stock Rom.
Then Update the Radio
Format SD -.- but backup your Data
and try to reflash MAGLDR
After that try to reflash Wp7 it should work
New developement:
It won't turn on, period. Nothing.
The power button does nothing, the reset button does nothing, nothing works.
The battery is at 4.1V, it's rated at 3.7V, would that cause the phone to not turn on?
Maybe a hardware failure.
Any warranty?
This happens when the phone over heats dont turn it for a while and dont have it conect it to the computer or anything when u try turn it on.
berbecverde said:
Maybe a hardware failure.
Any warranty?
Click to expand...
Click to collapse
Nope.
eddym123 said:
This happens when the phone over heats dont turn it for a while and dont have it conect it to the computer or anything when u try turn it on.
Click to expand...
Click to collapse
I've tried many times over the last couple of hours. It has not turned on at all, no matter what I do.
AutoItKing said:
Nope.
I've tried many times over the last couple of hours. It has not turned on at all, no matter what I do.
Click to expand...
Click to collapse
ok this happened to me before take it out and leave it out of the phone for a while.
I even got to think my phone was mess up also one time it wasnt working and I change the battery I had for the one of my girlfriend to turn it back on dont know if that helps.
Hi,I have a problem with my HTC hd2 which is when I insert the battery the phone boot up without me even pressing the on button.So was just wondering is there anyone that knows a fix for this problem I'm facing?thanx
Sorry but your problem is strange for me, I suggest you to reset all the phone starting with the task29 to erase the internal rom.
Make a backup of anything you want first then i would start with just a fresh download and install of the ROM your using. If that don't work then I would suggest what adone.h has said to try. Don't forget to wipe data, cache, and delvic if using Android.
Ok thanx for that adobe.h and htccraze, I will give then both a try and keep u posted on what happens.thanx
hmmmm i thought it was common for HD2 to do that or is it only during those HSPL/ radio update this would happen.
OK mengfei,but when i flash a new android rom the nand way and its all booted up and everything,then i press the power button i dont get the screen so the turn the phone off or restart it.Any answers?
Eject battery, let it out for some minutes.
Reset the OS.
If these things above won't work, you have to install a new OS (maybe bootloader has some problems, too). I had this problem, too. Got rid of it by removing the battery for a longer time. Now everything is fine.
it's a weird phenomenom
i got the same problem when i firstly got the HD2
but it automatically disappeared last month after i flash several wp7 roms
I have the same problem
It is a hardware problem in the digitiser/cable/button area.
My touch screen failed, when I got the repaired phone, I had the same symptoms - battery in phone on. Also pressing just the volume down button would boot into the tri-colour screen. This happened with windows or android flashed into nand.
Odd thing was that running the key test function in magldr seemed to work and the power button operated normally as far I could tell when powered up into windows or android.
I sent the phone back for repair again and got a refurb replacement.
I have tried to flash a windows 7 Rom to cure the problem mario_net,but when I trying to flash the Rom it just keeps coming up error near the end of the flashing process.Have u any answers people?
CR5N,just wondered how do u do the key test function in magldr?
DAZZA35 said:
CR5N,just wondered how do u do the key test function in magldr?
Click to expand...
Click to collapse
Apologies, it is under advanced -> key test in cwm (I'm on 5.0.2.6) accessed via magldr recovery.
Let it out for some minutes don't insert battery immediately after removed.