Related
I have couple of scratches on my touch pro screen.when the device is on the scratches are like rainbow colors really visible.If I change the touch screen (not the whole lcd screen) that will fix my problem right? Did any1 do this?
ummm i think when u meant by "rainbow colors" then ure gonna have to replace the WHOLE LCD screen, cuz more than likely its from the LCD screen, and i dont think the touch screen and LCD screen are 2 parts...i think theyre just one...not sure, but try to look on ebay OR idk if u have warranty on it u can probably call in HTC about it...
This is what I think will fix the scratches
Code:
[CODE]http://mobile1.brando.com.hk/prod_detail.php?prod_id=03976&dept_id=088&cat_id=0695
Code:
Much cheaper
For Digitizer Module for T-Mobile MDA Vario IV Touch Diamond
http://www.dealextreme.com/details.dx/sku.20648
For HTC Diamond
http://www.dealextreme.com/details.dx/sku.20647
I don't know if it fit the same as Touch Pro or Fuze, but read the spec
I have difficult time finding a How to replace digitizer video.
Any help?
Thanks
radoste said:
I have difficult time finding a How to replace digitizer video.
Any help?
Thanks
Click to expand...
Click to collapse
Maybe this can help.Its a How to remove cameras from touch pro with pictures
Code:
http://www.mediafire.com/file/h2mmwetxnij/HTC%20Touch%20Pro%20-%20Camera%20removal%20photo%20guide%20v1.1%20by%20A%20Mak.pdf
I saw that. It does not show how to remove the screen.
Why would you want to remove the camera?
radoste said:
I saw that. It does not show how to remove the screen.
Why would you want to remove the camera?
Click to expand...
Click to collapse
I wouldnt, thats just the only touch pro take apart that I found with pictures
mikechannon.net is a good place to start. But if you are looking to replace the digitizer only, you won't find it there. It's a bad move anyway. I tried that, cracked my lcd and end-up buying the whole lcd like this.
All I can tell you are my mistakes.... lol....
- never peel of the digitizer. it will ruin it.
- never try to remove the lcd with cutter blade. this is how i cracked it (stupid me and still regret it)
- between the lcd and the digitizer there is a thick, clear double tape like glue. i came across some information about this somewhere (forget where...). one said you should heat the glue first (don't know how to apply this without affecting the lcd) . other one said have to use dental floss.
So, there you go.
HTC Touch Pro- LCD & Digitizer replacement instuctions
Hi everyone. I have SCOURGED the internet looking for some kind of decent instructions to replace the LCD & Digitizer screen on my HTC Touch Pro (Sprint) phone with the new set I purchased from Hong Kong. Mike Shannon's site does NOT give directions for this specific area.
I have seen you all talking about needing to do the same thing and wonder if anyone has done it? And do you have any directions to help me?
I've had this part for a month now, and can't find any directions to do it! My dog chewed it, and the touch works, but the screen is half black now. I read it is easier/less risky to replace both lcd and digitizer, which I went ahead and purchased them both with the tools, now I just need to find something decent (instructions) to have help replacing it.
thanks to anyone who can step up to help me, I'm frustrated beyond all comprehension, and now feel I may as well ditch the phone if I can't find a way to replace it. Or maybe you know someone I could send it off to? Everyone wants to charge a couple hundred bucks sending it in to them!
to the appling heat ...u can try putting it in a ziploc bag and boiling it ...and for the instructions this is the best i can do for u http://store.payloadz.com/str-asp-i...nance_Manual_eBooks_Technical-end-detail.html
im pretty sure after all ur fustration 8 dollars wont kill u ...and im pretty sure the condensation from the boiling wont hurt
and i found a free one hope it helps http://www.htcdriver.com/index.php?page=htc-raphael
it's a long trip, in russian, to get to the lcd
http://www.pdacenter.ru/razborka/htc-touch-pro/
You can use Google translate on it. It seems that the hardest component to get to is the lcd. I also bought the digitizer, since my lcd is fine. I'll post a follow-up if I go for it.
Any luck getting the touch screen off and new one on?
I bought a touch screen and digitizer as separate items. I wish I had known that some kind of clear adhesive is supposed to be between them.
A) What happens if you don't use this adhesive?
B) Has anyone successfully replaced the screen/digitizer with replacements on the fuze or touch pro?
Anyone having luck?
Has anyone actually figured out how to install this? I just got what was supposed to be a replacement LCD+digitizer. they shipped the pieces seperate, so I can't understand how to put them together, since HTC seems to only list the part as one piece and there are no instructions or videos anywhere that indicate how to install them as seperate pieces, or get them to connect.
Dont do it!!
Ok, I just recently bought a parts phone on here (a Fuze) and was "just going to replace the digitizer" (Authors laughs, then cries at statement)
Ok, yes you can replace the digitizer without replacing the screen, BUT they tell you to use an oven (you can buy one from HTC they make it available to their techs, so you need someone that can get that for you). If you do not make sure that ALL of the glue is loose prior to taking the digitizer off you will split the LCD.
It is much simpler to get either a parts phone or a screen and digitizer and replace the part. I had to replace my digitizer as the touch function did not work. You can find older project phones in the market section. If you figure the cost of a parts phone (plus you have extra parts if anything else goes out) vs. if you buy a digitizer, then rip a part of the LCD because all of the glue was not disolved, and have to buy either a parts phone or a new phone anyway you will be way ahead of the game.
There are a number of good resources on here as to how to disassemble and reassemble the fuze.
I WOULD NOT RECOMMEND TRYING TO REPLACE THE DIGITIZER ALONE IF YOU HAVE NOT BEEN TRAINED OR HAVE THE PROPER EQUIPMENT - unless you need a reason to sell your spouse on why you need a new phone. "Honey, I tried my hardest to fix it, but I guess it is really broke now, I'm gonna have to get an HD2"
If you have any questions about the process let me know I am always more than happy to help.
http://www.mikechannon.net/PDF%20Manuals/HTC%20Raphael_SM_A10%20_GENERIC__01%20Dec%20
pkwhisker said:
Mike Shannon's site does NOT give directions for this specific area.
Click to expand...
Click to collapse
Yes, indeed, mike channon does offer a very detailed service manual for the raphael.
Replacing the display on the HTC Touch Pro (Raphael): Some Tips
Replacing the display on the HTC Touch Pro
How To - Tips
1. Collect information
a. Find the Service Manual HTC Touch Pro (Raphael) on Mike Channons's site, the Raphael wiki or you could Google for it. File name is "HTC Raphael_SM_A10 _GENERIC__01 Dec 08.pdf".
Take a look at the disassembly and assembly chapters of the Service Manual.
The following two lists may be helpful.
---
List 1: types and quantities of screws
[SPL no., P/N, pages of Service Manual, description, quantity used in Raphael]
10. 72H01893-00M (see p. 34), black (middle length), 2x
11. 72H02450-00M (see p. 32, 34, 30), black (shortest type), 7x
12. 72H02474-00M (p. 37), black (longest type), 4x
13. 72H02689-00M (p. 30), metal, 4x
26. 72H02865-00M (p. 35), metal, 6x
27. 72H02886-00M (p. 35), 1x torque screw for M/B, 1x
---
List 2: kinds of tape/fabric used in the Raphael
a. Conductive fabric
Self adhesive conductive fabric, parts 14-24 on the SPL. The adhesive backside is also conductive.
b. Mylar
A specific kind of polyethylenetereftalaat (PET) used for electical insulation.
c. Kapton tape
Kapton is a polyimide film which can remain stable in a wide range of temperatures. (electrical insulation)
d. EMI gasket
EMI shields are implemented in a design to isolate one component or section of a device from another.
e. Double sided tape
---
b. Movies of the disassembly process can be found on YouTube for the HTC Diamond.
The Diamond does not have an integrated keyboard, so it is a bit different, but it is good enough to get an idea of the process.
The information on how to replace the screen itself is not found in the service manual.
c. Study the last few stages of the HTC Touch Pro page on pdacenter.ru
(Translate the page into English using Google.)
The display is attached to the metal frame by 4 small pieces of double sided tape.
3. Get some tools
a. Phillips (cross head) screwdriver size 00x50
The right size is 00. The length, 50mm, is less important.
There is one torque screw in the Raphael (SPL no. 27), but it can easily be handled by a normal screwdriver.
b. Plastic stick (to open the case)
The standard plastic stick I had ordered was actually too big. The one I made myself was smaller and proved to be better.
c. Other tools
I did not use these, but if you plan to do more than one it would be a good idea to use the
- plastic tweezers
- ESD wrist wrap
- rubber gloves
4. Buy a display with touch screen attached to it
You could buy the touch screen and the display separately, but I could not find any information on putting them together. Avoid problems by buying these already attached.
5. Replace the display
a. Disassemble following the Service Manual, leaving the M/B unit in order.
Be careful not to break the small speaker cords. Do not move them too much because they are very fragile.
Be sure to keep every piece of tape safe for reassembly. Buying new tape can be quite expensive.
b. For the last stages, follow the instructions from pdacenter.ru.
Press the old display gently out of the metal frame. Move the pieces of double sided tape from the old to the new display, and fit the new one into the metal frame.
c. Reassemble following the Service Manual.
Good luck!
What will fit what?
Will the lcd and digitizer from a sprint version work on an alltel version(ppc-6850)? Or is there another lcd and digitizer that i can use? Im back to the old berry 8703 and its killing me.
spammer said:
if you just find scratches on the surface, then you just need to change the touch screen digitizer. the soldering is requested when you fit it.
But of course, if you buy the one that lcd and touch screen fit together one, then no soldering request.
Anyway, soldering is not such difficult if you has the tool.
thanks
Click to expand...
Click to collapse
I don't see any soldering involved there. The digitizer is fitted with thin lines of some kind of glue or kit around the edges. I have not seen any documentation on it though.
ingmardb said:
I don't see any soldering involved there. The digitizer is fitted with thin lines of some kind of glue or kit around the edges. I have not seen any documentation on it though.
Click to expand...
Click to collapse
you can look at the connect flex cable part of your touch screen and the lcd, you will find they are soldered together. Of course , if you don't soldering it together, it will also work, but not as good as after soldering.
Hi there,
unfortunately I dropped my Toch HD last weekend on rough ground, the housing ist completely scratched at the corners and looks awful. The lucky part is that technically it still works perfectly and the display/screen is not damaged.
So, I'd like to replace the housing and I've already found some replacement parts on the net (e.g. here for USD 80... i know, quite expensive but for me it's worth it, cheaper offers always welcome though).
The real problem is that I couldn't find any instructions to do it and no hints whether any special tools are necessary. The forum search only delivered rare information. With a proper instruction I would dare to do it myself, but without I'm afraid to damage the device.
So has anybody got a detailed instruction or experience changing the housing?
would be grat,
thanks in advance,
regards jan
Isn't this what you are looking for?
http://htcdriver.com/index.php?page=htc-blackstone-touch-hd-service-manual
And congratulations for not damaging the screen, because this is what happened to me (see the attachment), and amazingly everything works .
Thank You, exactly what I was looking for...
...however, it looks much more complicated than I expected... have to toke some time to analyze the instruction for which steps are necessary for changing the casing only without complete disassembly... not sure yet if I should dare it...
but, anyway, thank you again!
regards jan
P.S.1: has anybody tried it yet and have some experience to share?
P.S.2: I'm not sure about the "plastic stick" shown in the disassembly part... whether it's really just a flat and bit flexible plastic stick or if itr has any special tip...
try, it's easy
I did it on a P3600 and it was not so difficult, just take your time (at least one hour).
Read everything carrefully before starting, prepare tools and clean your hands
I also dropped my touch hd and dented the front bezel. I have bought a complete replacement housing and tools required for only £25 on ebay.
I have read the service manual and it doesn't deal with removing the lcd screen from the bezel. I read somewhere that it is a complete unit and you can't detach it easily
The new case is still in its box until I can find more out. Any ideas would be greatly appreciated!
Yup it isn't as easy as it looks. The manual lacks details as it only tells you how and where but did not elaborate more on minor yet important details.
I bought an antenna cover from ebay to replace, and boy, removing the cover was not easy at all. I used to take apart my other phones all the time and HD is the most difficult one I've done. I ended up breaking the small plastic sockets (that clicks the cover firmly into place) of the original cover. Luckily I have a new one to fit back in. Originally I wanted to replace the whole housing myself but I stopped after the antenna cover until I get a video of how its done.
So anyone? Kindly? Any videos please? XD
still no videos out there?
not looking good for us as i still can't find any video tutorials out there so im assuming that its super hard to do
please can anyone assist?
superseagull said:
not looking good for us as i still can't find any video tutorials out there so im assuming that its super hard to do
please can anyone assist?
Click to expand...
Click to collapse
lol i chickened out eventually. and im still using my not-so-perfect housing as im reluctant to change it myself while being too stingy to pay a pro to do it.
I've successfully taken my HD2 apart now I'm not sure about the digitizer I need. My phone doesn't have a T-Mobile logo and it came with the leather pouch which I read means it's not the T-M version.
I'm looking for a new digitizer and the one that looks like the connector would fit says it's for the T-M version. Rather than go on about it here is a pic of my digitizer. I'm in the UK so if anybody has shopping suggestions I'd be grateful.
Ty
hypertyper said:
I've successfully taken my HD2 apart now I'm not sure about the digitizer I need. My phone doesn't have a T-Mobile logo and it came with the leather pouch which I read means it's not the T-M version.
I'm looking for a new digitizer and the one that looks like the connector would fit says it's for the T-M version. Rather than go on about it here is a pic of my digitizer. I'm in the UK so if anybody has shopping suggestions I'd be grateful.
Ty
Click to expand...
Click to collapse
I can't say too much based from picture posted above ...
It could have already replaced unbranded digitizer or it's Telstra, European, Taiwanese version... Are the call and end buttons colored on your phone (green and red respectively)?
If You have enough money, about 89-120$, better choice will be to buy a LCD+digitizer assembly also named LCM, they will work at all versions of HD2, not only T-mobile or European, I tested the LCM from European HD2 with in a T-mobile version of HD2 ant it works perfect. So go on eBay.com and buy one
Call buttons are all grey. I've though about getting the whole combo but it's more than twice the price and I'm not exactly rich so it would have been nice to just get a digitizer. I was hoping there would a way to identify properly which digitizer I need. I've sent a message to one of the suppliers on ebay. I'll see what comes out of it.
According to this article the different versions of the HD2 aren't physically the same size in terms of casing. Do the LCM units fit all the same?
pocketnow"dot"com/thought/t-mobile-hd2-vs-htc-hd2-comparison
Clarification
hypertyper said:
Call buttons are all grey. I've though about getting the whole combo but it's more than twice the price and I'm not exactly rich so it would have been nice to just get a digitizer. I was hoping there would a way to identify properly which digitizer I need. I've sent a message to one of the suppliers on ebay. I'll see what comes out of it.
According to this article the different versions of the HD2 aren't physically the same size in terms of casing. Do the LCM units fit all the same?
pocketnow"dot"com/thought/t-mobile-hd2-vs-htc-hd2-comparison
Click to expand...
Click to collapse
Let me help you:
#1.your picture is defining an uncommon/unbranded TMO(bile)US touchscreen(No doubt about, at least for me!), but grey hardware keys are for international HD2 model, probably you have a (let say) hybrid (home made)version between american(TMOUS) and international model;
#2.nevertheless, in your financial position, I'll look on ebay for an appropriate touchscreen model(there are plenty, most of them with very clear pictures like your's) for about US$30-40;
#3. if you want a combo, as far as I know(and pvii already said it) the 2 LCMs are geometrically identical, but the frame/chasis on which lay on the LCM is different(the american model is longer on 2,0-2,5mm);
#4. international model is cheaper & easier to find.
For more informations/help feel free to contact me!
Cheers!
hypertyper said:
Call buttons are all grey. I've though about getting the whole combo but it's more than twice the price and I'm not exactly rich so it would have been nice to just get a digitizer. I was hoping there would a way to identify properly which digitizer I need. I've sent a message to one of the suppliers on ebay. I'll see what comes out of it.
According to this article the different versions of the HD2 aren't physically the same size in terms of casing. Do the LCM units fit all the same?
pocketnow"dot"com/thought/t-mobile-hd2-vs-htc-hd2-comparison
Click to expand...
Click to collapse
May be it will be better if You post a photo of rear side of your display or at least say it's product number (from sticker on square copper pad, rear side), i.e. P/N:60H00300-00P is for T-Mobile and P/N:60H00295-00P is for international version.
If You don't have enough money for a european LCM combo, you can buy a LCD apart and digitizer apart, even from different sellers but you have to buy matching parts, both for European or both for T-Mobile version.
Thanks for the info guys. The serial number is the kind of solid identification that I was looking for. The serial on my screen ending in 300-00P indicates that it's the TMobile version.
My theory is that since this phone was bought when it wasn't exactly new on the market HTC had switched to the solderless screens which seem more modern?!?
I'm assuming that in terms of connection the digitisers that look like they will fit in terms of connection should work. I'm only worried about the dimensions of it since the casing of mine is smaller than the real TMobile version from what I can tell.
Since I can't find anything else on ebay I guess I'll order one of the TMobile ones and see if it fits. I'll look for a shop with return policy just in case.
Thanks for the help. If anybody has further suggestions I'd love to hear them.
[/QUOTE]I'm only worried about the dimensions of it since the casing of mine is smaller than the real TMobile version from what I can tell.
Thanks for the help. If anybody has further suggestions I'd love to hear them.[/QUOTE]
Read carefully my previous post:
you don't have to be worry, the touchscreen, lcd and lcm are geometrically (length x width) identical!
I'm only worried about the dimensions of it since the casing of mine is smaller than the real TMobile version from what I can tell.
Thanks for the help. If anybody has further suggestions I'd love to hear them.[/QUOTE]
Read carefully my previous post:
you don't have to be worry, the touchscreen, lcd and lcm are geometrically (length x width) identical![/QUOTE]
Yupp, any LCM will fit on any model of HD2.
I wasn't sure which part was identical but if the digitizers are then what I ordered should do the trick. Digitizer should arrive this week so hopefully I'll have something to report about
edit: Digitizer arrived and fits perfectly. I guess my phone was some weird mutation. Solution is to just buy a digitizer with the correct connection, job done.
Oh and getting the right tape is a total *****. I had to take everything apart again because my tape wasn't strong enough!
I thought I'd post my findings and produce some cliffnotes on how I fixed my HD2.
Firstly, if you search youtube for "leo as" and "leo dis" you will find the official HTC videos on how to assemble and dis-assemble the HD2. They make it look easier than it is. Also, they don't separate the digitizer from the screen.
I ordered the tools to "dis" off ebay. Especially the T5 screwdriver was worth getting since it allowed me to find out which digitizer I need. I have a non TMobile version but needed the TM digitizer.
I found that using an old credit card type of card works very well for taking the phone apart. It can reach further into the phone and bends rather than breaking like some of the cheap tools from ebay.
Especially for separating the digitizer and screen it's great. I heated up the digitizer & lcd combo in the oven for a couple of minutes like the video advertised for taking the middle part of the phone apart (you'll see in the vid). Here comes the interesting part: Instead of sliding the card / tool all the way across the screen (between screen and digi), it's enough to just separate it around the edges. There is no glue or adhesive in the middle. It seems obvious now but I got lots of glue all over the LCD which was a bit** to clean.
Another tip that is worth repeating is getting the cheap double sided tape from ebay which is meant for Iphone digitizers (3M branded). I got three of them for £1 incl delivery. I used it to put the "middle" of the phone together. Screen and digi I did with cheap double sided tape which is working but I regret somewhat.
Another tip would be the whit cable (flash?) which goes on the bottom of the mainboard. I put it on top to start with. It's easy to mix up. Also it makes sense to put one end on before you put down the mainboard because that way you still have proper access.
Make sure you have good tape and be patient. I had crap tape and just slammed things together because I was so keen to see if the phone still works. I had to take it all apart again which almost broke the phone because it was coming apart in all sorts of places.
Overall it's like a big, fragile puzzle. I got the phone from a family member who had dropped it so all I had to get was the digitizer and tape. Now I have the best phone that ever lived
If anybody has questions, I feel like I know the hardware of the HD2 inside out.
I also took mine apart to replace the digitizer. I haven't got the new one yet though. I also watched the take apart vid on youtube. Unlike you I didn't disconnect the white wire from under the board. As a matter of fact, I left the other wires attached to the mainboard and just disconnected them from the GPS, camera and Bluetooth boards. At the end of the little channel that the wires are in, there was a little metal tab that held the wires in place. I just bent the tab up to remove the wires. Like you I used a piece of credit card to loosen the glued pieces.
Hi
Ok,my HD2 is broken since October and I'm a student and i just couldn't afford the repairs. All I know is that - it seems like this - the connector to the display is not working anymore (common problem I heard).
But honestly I have no idea what to do:
Money is still a bit tight so I can't really buy a new phone.
On the other I couldn't even figure out what to repair. I know the display is a whole unit (LCD and touchscreen glued together) and somewhere in between is the connector,which lost his contact to the mainplatine.
But all I find are the plastic frames with a connector ( http://www.algogo.com/store/product...er-HTC-HD2-II-LEO-T8585-.html?setCurrencyId=2 ) [I have no idea what digitizer means..i always thought it's the same as the touchscreen itself but that's not true.]
Or I find things like this LCD+Touchscreen or even cheaper this .
I know I need the big connector cable as mentioned in the first link of the digitizer offer but here the connector cable is suddenly on the side and not down to the keys...
Well,but it's the whole display package so I guess I need this...
I already have the right screwdriver for this work but I'm still not sure what to do/if it worth it.
Ok,the 70 Euro plus shipping..that's cheap but on the other hand the HD2 is already a bit old (but I still love Windows mobile and what do keep that).
So..any clues..suggestions?
my suggestion is to go for.. buy any LCD+Digitizer pre-assembly pack, check this videos link
and try by your self..
also many informations about the procedure you will find here link2
or here link3
take your time and you will be successful repair it at your own..
Thanks your these links but the thing is..I already know them and tried it as far as I could (which is why I already have the right screw driver for it). In the end I just scratched it more and more...
The thing is..I'm not really good at this - especially the display removing and heating part of the job. So I thought I could bypass that by simply replacing the whole display unit. Ok,still 70 Euro if I chose the second ebay link but that's way cheaper than the other ebay offer plus really really cheap compared to these send-in repair shops from the internet (about 200 euro then).
I'm just not sure if these are the right components or if there is a cheaper offer somewhere else.
I bought my LCD+Digitizer for 55USD with the shipping costs, from ebay.com.
It was from a China seller, not an OEM item for sure, but after all, my LCD was as a new one!!!
I also needed an adhesive tape like this one.
you should remember that you will need to detach the LCD+Digi from the middle metal plate frame bezel
and the only way is with heat. I tried with a hair drier..
And all went as is should be..
I'm sorry to dig this thread up but I just found my old HD2 and wondered if I could get it back to work.
Of course I need a new battery and stuff but actually it's still ok.
The concerning part is the glued display and the heat you need but now the HD2 gets older and the prizes drop so I saw a complete display (the glass, the screen and the touchpad-layer) on amazon for 60 euro.
Would you go for it?
I'm not quiet sure how to disamble the device but there are videos for that. And then it should work, right? There is no glue or duct tape or anything involved if I swap the whole display-component, right?
Raizm said:
I'm sorry to dig this thread up but I just found my old HD2 and wondered if I could get it back to work.
Of course I need a new battery and stuff but actually it's still ok.
The concerning part is the glued display and the heat you need but now the HD2 gets older and the prizes drop so I saw a complete display (the glass, the screen and the touchpad-layer) on amazon for 60 euro.
Would you go for it?
I'm not quiet sure how to disamble the device but there are videos for that. And then it should work, right? There is no glue or duct tape or anything involved if I swap the whole display-component, right?
Click to expand...
Click to collapse
From the research I've done you'll need either super glue or 3m double sided tape.
Sent from my NexusHD2 using xda premium
I need to buy replacements quick. So fa rthe only place I found that seems sort of reputable is http://www.repairsuniverse.com/samsung-galaxy-s4-lcd-digitizer-assembly-frame-cdma-black.html but resellerratings.com seems to paint a shaky picture.
I just want to make sure I get an OEM part and not some Chinese knockoff, are there any other places?
I used eBay for my replacement screen. Delivery to Australia was good, was cheap, even included the tools required to do the job. Although the plastic pry tool broke early into the job.
I ended up screwing it up and damaging the digitizer (mine was a screen only replacement) and took it to a shop to do for me instead. I now have broken backlights for my buttons and have since dropped and broke it again, but their work was ok.
Good luck, and be very, very patient. And even more careful to ONLY pry up the glass, not the digitizer layers underneath