Can someone tell me where to buy replacement screens/digitizers? - Galaxy S 4 Q&A, Help & Troubleshooting

I need to buy replacements quick. So fa rthe only place I found that seems sort of reputable is http://www.repairsuniverse.com/samsung-galaxy-s4-lcd-digitizer-assembly-frame-cdma-black.html but resellerratings.com seems to paint a shaky picture.
I just want to make sure I get an OEM part and not some Chinese knockoff, are there any other places?

I used eBay for my replacement screen. Delivery to Australia was good, was cheap, even included the tools required to do the job. Although the plastic pry tool broke early into the job.
I ended up screwing it up and damaging the digitizer (mine was a screen only replacement) and took it to a shop to do for me instead. I now have broken backlights for my buttons and have since dropped and broke it again, but their work was ok.
Good luck, and be very, very patient. And even more careful to ONLY pry up the glass, not the digitizer layers underneath

Related

Busted Outer Glass of LCD

Well I dropped my G1 the other day and it busted the outer glass part. The LCD is fine and it still works perfect. I have looked everywhere,with no luck of finding any parts for them. So I called HTC and they told me 150-250 to replace the glass!! So I was wondering if any one know anyone that does G1 Repair or if anyone know of another phone that has more ava. parts for it with a 3.17" Screen? Any help is greatly appreciated.
Nope, I got AT&T. Was thinking of taking apart the phone and getting the glass measurements and having a custom cut piece of glass.
i believe its a special type of glass
Pretty much stuck buying the glass from HTC on this one ...sorry
PS... it is glass
iphone 3g - Dream lcd
I read that the same screen is in use on the iphone 3g, I doubt its true they probably meant type or sumthin, maybe worth a check...
on the old palm pdas you could replace just the glass if the layer under it isn't damaged, this may no longer be possible with these screens, once the bigtime flashing begins there will be lots of bricks available pretty cheap, maybe you should keep an eye out for somebody who pooched the dev bootloader install then after you convince them they killed it you could buy it maybe for less than the HTC price...
gotta say, that sucks if you were a tmob customer you'd have a few options...
bhang
Hello. Don't you think It's weird that it happened to me too today?
I've never had a broke phone since my Nokia 8210.
Well, some idiot had placed out one of those kinds of plastic bands you use to seal packages with, a black one.
It was pitch dark and I fell as the plastic ring got snared around my feet. Obviously my Jabra bt3030 got pushed against the screen and it got severely cracked.
My insurance company seems to be covering the whole phone except a small sum. This was from the phone part, but I got to see if I can get something from the health insurance as I hit my head and scratched my hand (though not likely but I can always try)
The touch seems to work most of the time, though it reacts slowly but some times It's just dead.
This really sucks.
I'm dead serious when I'm talking that there was no way that the band could be seen when walking.
http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226&view=unread
Some info there.
aad4321 said:
yeah i dont think it is really even "glass" mabye its a type of plexiglass?
Click to expand...
Click to collapse
It is glass. But you can not simply cut a piece of glass to the same dimension as the touchscreen is integrated into the glass cover. So yes you will need to get a htc or aftermarket replacement part.
The interesting thing is that the repair cost you quoted is identical to the cost of the copay if you go with the Asurion device insurance T-mo offers. So device insurance would just be a waste of money at $5 a month if you end up with broken glass.
Looks like I will just have to hold onto it until aftermarket parts come out. I busted mine by letting it slip out of my hand while talking on it....then it took a 6ft fall to eventually land face first on concrete.....I didnt even wanna pick it up cause i new it was messed up and if it wasnt I was gonna call HTC and give them props! I have a ava. upgrade from AT&T Maybe get a Iphone until this one gets fixed then sale iphone on ebay for 5x wuts its worth.
The iphone's screen seems to crack pretty nice as well.
I hope changing the glass on the G1 isn't as frustrating as on the Iphone.
http://www.youtube.com/watch?v=sT7wRXeYsyg
edit:
Not directing this to the message above, just saying.
Cracked screen replacement with compatible HW from third party --when?
I cracked the LCD of my G1 after about three weeks and have noted that neither PPCTechs nor MobileKangaroo have yet acquired a source for the replacement screen.
My understanding is that HTC currently charges what one thread in another forum (http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226) quoted as "a minimum of $238.00" to make this repair.
I expect this repair to be offered soon by third parties for about $150, likely using a non-HTC screen product to replace the damaged one.
Has anyone heard any reports about forthcoming availability of such hardware? If so, then are there any non-HTC services to make the replacement?
yeah im looking for this too...i dropped mine and then proceeded to step on it day two with the phone.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
WooHoo 2 items left as of this copy paste. $80, not bad price.
Shaggy
They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy
This waht i found out
so have the same issue and this is what I found out
so from my understanding there are 2 part to the lcd the outer glass touch sensor and the inner lcd. if the the screen is just cracked and you can see the image the u have to replace both. attached are the part descriptions fromt he g1 service manual. and below is a link of a site that sells them, but for some reason they sell the touch scrren with the outer bezel making it cost more. i called htc to order just the touch sensor glass but they said the dont sell replacements, they just fix em
link
Shagman68 said:
They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy
Click to expand...
Click to collapse
I contacted the seller of the screen and he/she told me that It's only the screen. If the G1 cracks It's the digitizer glass that cracks first. Then if you are unlucky the screen cracks as well. I managed to only crack the digitizer glass. The screen beneath is totally fine. Unfortunately removing the glass from the digitizer plastic was very painful and I managed to wreck the flat cable of the digitizer so that's beyond repair. Now I tried to disassemble the whole phone but I got stuck at removing the housing. First I had problems with the Torx bits. I have some Torx bits in my sets but the lowest I got was T8. I had to buy a cellphone bits set with a lot of different types of bits. It had Torx all the way down to T4. The T5 and T6 was what I needed. There are 4 T5 to remove and one T6. I have inserted the sharp plastic between the housing and the top case and released all hooks but it seems the front and back part of the housing of the phone is dead stuck.
You have to open the whole damn phone from the back to get to the inside of the screen. Why the screen housing uses standard Philips is also beyond me. I have lots of bad experience with standard Philips screws. The heads always get bad after a while of screwing. I have yet to have a problem with Torx.

Finally fixed by Touch HD!!

To make a long story short:
I must have somehow put too much pressure on the digitizer to create a "newton ring" which in turn would not allow me to use the touch feature of the digitizer. I sent it to HTC USA to repair it. They noticed the "newton ring" as well as the modified ROM
They would not warranty the "newton ring" and said they would not repair the Digitizer due to the fact that it had been "hacked". They would replace the Digitizer, LCD and internals for $389.00. I told them they were smoking crack.
After paying HTC $25.00 for doing nothing they sent the phone back and I went online to order a Digitizer. I paid $17.00 which included shipping and I got it within 7 days.
The HTC service manual does not have a guide on how to replace the digitizer or the LCD. They really don't want you messing with it.
It was scary and I thought I had ruined the phone when I pryed the front of the unit open. At first the sticker to the digitizer came off(black framing) and then you have to pry the digitizer(its pretty stiff) from the frame. I destroyed the thin cable that led to the backside of the LCD but the new one has one already attached so I wasn't worried about that part. The LCD with a metal base plate is attached to the back of it. You have to slowly pry off the LCD from the backside of the digitizer.
Anyways I have assembled it back and everything is working perfectly. It was doing Micro-Surgery at times.
Just wanted to share my story.
Congratulations!!
mrmomoman said:
To make a long story short:
I must have somehow put too much pressure on the digitizer to create a "newton ring" which in turn would not allow me to use the touch feature of the digitizer. I sent it to HTC USA to repair it. They noticed the "newton ring" as well as the modified ROM
They would not warranty the "newton ring" and said they would not repair the Digitizer due to the fact that it had been "hacked". They would replace the Digitizer, LCD and internals for $389.00. I told them they were smoking crack.
After paying HTC $25.00 for doing nothing they sent the phone back and I went online to order a Digitizer. I paid $17.00 which included shipping and I got it within 7 days.
The HTC service manual does not have a guide on how to replace the digitizer or the LCD. They really don't want you messing with it.
It was scary and I thought I had ruined the phone when I pryed the front of the unit open. At first the sticker to the digitizer came off(black framing) and then you have to pry the digitizer(its pretty stiff) from the frame. I destroyed the thin cable that led to the backside of the LCD but the new one has one already attached so I wasn't worried about that part. The LCD with a metal base plate is attached to the back of it. You have to slowly pry off the LCD from the backside of the digitizer.
Anyways I have assembled it back and everything is working perfectly. It was doing Micro-Surgery at times.
Just wanted to share my story.
Click to expand...
Click to collapse
How did you attach the digitizer to the LCD? Aren't they glued together or something like that?
Because that's where my attempt went terribly wrong: Instead of getting the digitizer off my LCD, I broke my LCD... I bought a new complete screen unit because I didn't know how the LCD is attached to the digitizer!
The digitizer is semi-glued to the LCD panel which sits on the back along with the thin metal cover. The digitizer has a thin flat connector that connects to the back of the main board on the bottom. I slowly pryed off the LCD(grayish white in color) from the back of the Digitizer. It came off and I aligned it back up with the new digitizer and the glue residue left over from the LCD adhered to the rear of the new Digitizer. the tricky part is the thin connectors that attach to the mainboard. You have to get a pair of tweezers to pull it from the flat connector. When you get the digitizer you will see the new connector. Attaching that and the prying of the LCD was the hard part.
I read somewhere some guy said he broke the LCD but in truth it wasn't the LCD that he broke. He pryed apart the 3 layers of the Digitizer and thought he ruined the LCD. I thought the same thing orignally then I when the whole LCD/Digitizer was in my hand I was looking realized that the LCD was the grayish/white panel on the back. One can easily peel away the top 2 layers of the digitizer and would think that it could be the LCD they ruined.
I hope that makes sense. It was the first time I did this and I didn't see the video where someone removed the Screen. I only saw the Russian guy who didn't finish the job because he was stuck at the end. I just figured it out the hard way.
Also the T6 works but I think a t5 would be better. I only had a T6 and it did the job.
I am so glad I wore gloves or I would have had some major finger prints all over the unit
mrmomoman said:
The digitizer is semi-glued to the LCD panel which sits on the back along with the thin metal cover. The digitizer has a thin flat connector that connects to the back of the main board on the bottom. I slowly pryed off the LCD(grayish white in color) from the back of the Digitizer. It came off and I aligned it back up with the new digitizer and the glue residue left over from the LCD adhered to the rear of the new Digitizer. the tricky part is the thin connectors that attach to the mainboard. You have to get a pair of tweezers to pull it from the flat connector. When you get the digitizer you will see the new connector. Attaching that and the prying of the LCD was the hard part.
I read somewhere some guy said he broke the LCD but in truth it wasn't the LCD that he broke. He pryed apart the 3 layers of the Digitizer and thought he ruined the LCD. I thought the same thing orignally then I when the whole LCD/Digitizer was in my hand I was looking realized that the LCD was the grayish/white panel on the back. One can easily peel away the top 2 layers of the digitizer and would think that it could be the LCD they ruined.
I hope that makes sense. It was the first time I did this and I didn't see the video where someone removed the Screen. I only saw the Russian guy who didn't finish the job because he was stuck at the end. I just figured it out the hard way.
Also the T6 works but I think a t5 would be better. I only had a T6 and it did the job.
I am so glad I wore gloves or I would have had some major finger prints all over the unit
Click to expand...
Click to collapse
Thank you for your explanation! But I'm still not going to attempt this on my own any time soon... We'll see... Maybe I'll change my mind if my digitizer is broken or scratched...
Respect man! You mentioned that you bought digitizer for $17. Is it possible to buy mainboard for Touch HD from that place? Can you please advise where I can get it. And how much it will be?
Got to love a bit of micro-electronics DIY!
This just shows that HTC are taking people for a ride - there are a lot of people who would have just paid the price they stated. As you've only replaced the digitizer, shows they were taking the mick with the LCD and otherwise, what are these "internals" that HTC said it needed I wonder...??
Just replaced the digitizer on my HD and it took about 1.5hrs. As long as you're very careful, it's not that hard at all.
Make sure you have the Service Manual though as it was a great help.
Have you got the link for the service manual?
Ive just had to order a Digitizer as my phone has decided it doesnt want to work anymore (6 months to go on contract too ffs).
Managed to get one from a UK seller with tools for £17 so im happy.
KickAssMoves said:
Have you got the link for the service manual?
Click to expand...
Click to collapse
It's in the wiki.
WelshWarior said:
Just replaced the digitizer on my HD and it took about 1.5hrs. As long as you're very careful, it's not that hard at all.
Make sure you have the Service Manual though as it was a great help.
Click to expand...
Click to collapse
Hi:
How did you get the digitizer separated from the LCD?
I was thinking of putting two suction cups (1 on the back of the LCD, and the other on the front of the digitizer), heating everything up for a couple of minutes with a heat gun, and then pulling them apart holding the suction cups.
Does that make sense?
Thanks.
mrmomoman said:
To make a long story short:
I must have somehow put too much pressure on the digitizer to create a "newton ring" which in turn would not allow me to use the touch feature of the digitizer. I sent it to HTC USA to repair it. They noticed the "newton ring" as well as the modified ROM
They would not warranty the "newton ring" and said they would not repair the Digitizer due to the fact that it had been "hacked". They would replace the Digitizer, LCD and internals for $389.00. I told them they were smoking crack.
After paying HTC $25.00 for doing nothing they sent the phone back and I went online to order a Digitizer. I paid $17.00 which included shipping and I got it within 7 days.
The HTC service manual does not have a guide on how to replace the digitizer or the LCD. They really don't want you messing with it.
It was scary and I thought I had ruined the phone when I pryed the front of the unit open. At first the sticker to the digitizer came off(black framing) and then you have to pry the digitizer(its pretty stiff) from the frame. I destroyed the thin cable that led to the backside of the LCD but the new one has one already attached so I wasn't worried about that part. The LCD with a metal base plate is attached to the back of it. You have to slowly pry off the LCD from the backside of the digitizer.
Anyways I have assembled it back and everything is working perfectly. It was doing Micro-Surgery at times.
Just wanted to share my story.
Click to expand...
Click to collapse
i just had mines fixed called them told them wat i did that i found an outer sreen and tryed to replace it myself and completely destroyed the lil black screen inside of the 4screens put together and that my device software was moded now i had 469 out going and another 469 incoming calls they only charged me 113 but wen we first talked about it they did say about 350 until they see the device and then they will call you before the repair it but the did wipe out my device and reinstalled the oem rom they also gave me a full new body and zero'ed out the incoming and out going calls which never changest unless they put in a new mother board which makes my phone brand new
sorry if ive missed it, but how do you get the lcd and digi out from the black outer casing frame to start with ??, from what i can see it comes out by somehow pushing from the inside to make it pop out ?? could someone please explain a little bit more on how to do this, ill try and make a vid of me getting it out as i have yet to find one that shows this, also my screen has that wierd pearl essance look to it?? does this mean its the digitiser.
Cheers
Mike
pickie said:
sorry if ive missed it, but how do you get the lcd and digi out from the black outer casing frame to start with ??, from what i can see it comes out by somehow pushing from the inside to make it pop out ?? could someone please explain a little bit more on how to do this, ill try and make a vid of me getting it out as i have yet to find one that shows this, also my screen has that wierd pearl essance look to it?? does this mean its the digitiser.
Cheers
Mike
Click to expand...
Click to collapse
Mine had that pearl essence look to it for a good few months before it broke, not that im sure that has anything to do with it.
Just awaiting the delivery of the digitizer and hopefully I can repair it.
yeh mine had the pearl effect for a long time prior to it dyeing
ive followed the service manual and the video of the guy who gets stuck near the end, but how do you g et the screen out of the casing to get to the digitizer?
Its one hell of atight fit and i cant see anything o bvious.
Help
Hi Guys
Sorry about the late replies - had phoneline probs!!
Assuming you followed the instructions in the Service Manual to take the rest of the phone apart, you've just gotta be VERY careful and push the screen out from the back (where the Circuit Boards where) of the plastic frame. At first, it feels like it's not budging but be patient and it WILL start to push away.
It seems to be held in with some sort of hot glue or maybe a contact sort of adhesive and I didn't try it but some heat from something like a hair dryer may make the job easier.
Many people have cracked their LCD screen during the repair but as long as you're careful not to bend the screen too much when taking it out, you'll be fine.
I peeled the 3 layers (outer glass ones and then the Digitizer itself) off the LCD whilst removing it.
Good luck - it's really not that hard. Any more questions - just ask ;-)
ive got the phone apart to the point of the service manual/video
which part of the back do you push out? doesnt look obvious as to whats attached and what isnt
Once you get to the last stage (I thinks it's the Speaker Removal) you simply push on the metal protector of the LCD from the back. You will see small holes in the plastic of the back of the frame where you can push something blunt through and push very lightly on the LCD to push it out.
If I remember correctly, at the bottom of the phone where the circuit board with the vibrator and microphone on it was sitting, there is quite a large opening with the metal backing of the LCD visible through it. I started pushing there and gently went all around the phone in the various small holes dotted around it.
As I said above, it won't feel like it's working at first but it will - just be patient and not too heavy handed!

Another screen broken advice needed

Hello all,
I bought a Galaxy S4 for my partner, and stupidly didn't get it insured.
The screen got cracked quite badly, so fr £120 a local lad put a new screen on. Later that week it got dropped onto mud on the way to nursery and smashed entirely.
I now have a predicament, either give up the phone and go back to my sluggish s3, or ask you guys this question:
Where is the best and most value for money place to get a smashed screen fixed (you can't see anything just a rim of light) somewhere reputable that will use genuine parts and guarantee their work? I really don't want to just leave it on the shelf and am worried that without good advice I will end up with another shabby repair.
Your input would be greatly appreciated.
Many thanks and Happy Christmas,
Ric
If you only break the front glass like what happened to mine, you can get new glass for £5 and DIY. (If you're confident working on things like that - it is a bit of a nightmare of a job to separate the glass from the touch sensor)
But if there's no picture on the screen at all then you've killed it completely. A new full screen assembly is about £90 on eBay I think, so £120 is about the right price for someone to do it for you.
BTW, the first time you broke your screen, if you could still see the picture on the screen was fine, then the guy probably charged you £120 to change the £5 front glass. I've heard of people getting ripped off like that.
Most of the time it is just the front glass that is broken. Unfortunately this latest time, it sounds like you've been unlucky.
You could always take out phone insurance, leave it a couple of months, and then the screen breaks.
knuckles1978 said:
If you only break the front glass like what happened to mine, you can get new glass for £5 and DIY. (If you're confident working on things like that - it is a bit of a nightmare of a job to separate the glass from the touch sensor)
But if there's no picture on the screen at all then you've killed it completely. A new full screen assembly is about £90 on eBay I think, so £120 is about the right price for someone to do it for you.
BTW, the first time you broke your screen, if you could still see the picture on the screen was fine, then the guy probably charged you £120 to change the £5 front glass. I've heard of people getting ripped off like that.
Most of the time it is just the front glass that is broken. Unfortunately this latest time, it sounds like you've been unlucky.
You could always take out phone insurance, leave it a couple of months, and then the screen breaks.
Click to expand...
Click to collapse
ha, the first time the phone broke, my misses threw it against a metal door obliterating the top and matrix thingy so an extensive repair was required. I'm well aware of the £5 DIY jobby hairdryer thing but this second breaking is again both screens, and I don't want a shabby repair I want the original screen part so that it is as strong as it can possibly be. I paid this guy £120, but the screen was so weak it broke dropping on mud! SO I still need to know, where can I get it fixed with genuine Samsung parts? Samsung only? Are the any reputable companies members would use to have their £500 phones repaired?
Thanks to the guy that replied I can't see your name now I'm replying somehow...
In pretty sure there aren't any fake AMOLED screens, not like phones that use LCD - there are hundreds of fake LCD's for those phones. But there are fake front glass panels.
If I wanted to make sure that genuine parts were used I'd order the screen assembly up from eBay myself. You can order it up as a complete front assembly from eBay, and it's a very easy job to change the whole thing over yourself, if you're reasonably confident about tackling things like that. Just make sure it's described as 'Genuine Samsung', and not 'Samsung panel genuine for i9505' or suchlike. If it's described as 'Genuine Samsung', then you have comeback of its not.
I've fixed a good few phones though, and all the times I've ordered parts as I've described above, it has been the real deal. It's pretty easy to tell the fake front glass panels.
Changing the front glass only with hairdryer etc is a sh!tty job, but changing a whole front panel which has the chrome effect plastic trim piece, AMOLED, touch sensor, and front glass already assembled is a piece of p!ss...
I would totally recommend just getting it fixed... plenty of tutorials online to follow. Watch a few of them and see if it is something you are comfortable doing yourself. I've done it and found it to be quite simple. But, it all depends on your comfort level with repairing things...
I think getting it fixed is the idea, yes lol
I was saying though that since it's the whole thing that is broken and needs changed, and not just the front glass, the job is much easier. It's just a case of taking a few screws out and swapping the whole front assembly. On a difficulty rating out of 10 I give it a 4
If you watch a couple of videos on YouTube first, and you take it nice and carefully, I'd say this is a job that most people could handle.

Anyone gone through front glass replacement?

Recently got a GS5 and my mom doesn't have a phone right now so I'm handing my N4 down to her. The front glass is cracked and I wanted to get that fixed before I do. The digitizer and lcd are not broken, just the glass, everything else looks and functions fine. I guess what my question is, if I take it to a repair shop can they just replace the front glass or am I looking at around 100ish to replace it all? I'll be going in and getting quoted but just wanted to see if I got any input from here first, it will likely be a week or so before I take it anywhere due to this damn weather.
wareju said:
Recently got a GS5 and my mom doesn't have a phone right now so I'm handing my N4 down to her. The front glass is cracked and I wanted to get that fixed before I do. The digitizer and lcd are not broken, just the glass, everything else looks and functions fine. I guess what my question is, if I take it to a repair shop can they just replace the front glass or am I looking at around 100ish to replace it all? I'll be going in and getting quoted but just wanted to see if I got any input from here first, it will likely be a week or so before I take it anywhere due to this damn weather.
Click to expand...
Click to collapse
The same thing happened with my friends N4. The glass, digitizer and LCD all had to be replaced as they all come as one unit. Cannot get them separately.
Amazon/ebay has parts where you can just order the LCD/Digitizer etc, but then to separate them you have to have a heat gun etc. if you touch any part by mistake you will get finger prints or smudges permanently. So not a good idea unless you are one of those super careful person. http://www.ebay.com/itm/LG-Nexus-4-...D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557
if you are handy, you can order the whole assembly online (amazon) for about 60 bucks or so) http://www.amazon.com/Touch-Screen-...r=8-1&keywords=nexus+4+lcd+screen+replacement
I personally got it replaced in So Flo for about 95 dollars + tax. I have been quoted about 140 at a chain fix up places.
bluesteve3 said:
The same thing happened with my friends N4. The glass, digitizer and LCD all had to be replaced as they all come as one unit. Cannot get them separately.
Click to expand...
Click to collapse
Sure they do. FYI, the "glass" is[ the digitizer. If "everything works", then technically all that needs replacing is the digitizer.
However, digitizer replacement is far from an easy thing to do. Not only does it require some specialist equipment (suction cups, heat gun, glue), you're probably going to screw it up unless you've done it before.
wareju said:
Recently got a GS5 and my mom doesn't have a phone right now so I'm handing my N4 down to her. The front glass is cracked and I wanted to get that fixed before I do. The digitizer and lcd are not broken, just the glass, everything else looks and functions fine. I guess what my question is, if I take it to a repair shop can they just replace the front glass or am I looking at around 100ish to replace it all? I'll be going in and getting quoted but just wanted to see if I got any input from here first, it will likely be a week or so before I take it anywhere due to this damn weather.
Click to expand...
Click to collapse
You can buy just the screen assembly off eBay for about $45, which has the digitizer already mated with the LCD. However, this requires removal from the bezel (again, a heat gun is recommended), then gluing the new one back in. For $60 you can get the entire front assembly (hey, brand new phone!), which is the easiest way to go about things. I'd also recommend buying a new battery ($20) and replacing the old, tired one while you've got the phone apart.
It's not all that difficult to do it yourself. You'll need a T5 TORX driver, something thin, sturdy and plastic to pry the phone halves apart (you can buy screen assemblies that come with all these tools), and some patience. Do everything on a fluffy white towel so the little screws don't get lost. The tricky part is the little rubber gasket thingy that goes over the proximity/light sensor module. Most people who have done a screen replacement have found that reassembly screws up the prox sensor, causing it to always read "near" (meaning during a call the screen will stay off and you can't hang up or use the dialer). The common fix is to put the gasket in backwards.
There are a number of threads here, some youtube videos, and a good teardown tutorial on ifixit.com.
I thought the digitizer was what recognized touch input? Either way I don't think I'll be doing any of this work myself, I'll just take it up somewhere for her for the repairs.
wareju said:
I thought the digitizer was what recognized touch input?
Click to expand...
Click to collapse
It is. It's built into the front panel of glass (which is made up of a bunch of different layers of stuff). Don't ask me how it works, it's all magic to me. But when you break the front glass, yet everything still works, that's the digitizer. If you look up digitizers on eBay you'll see that it's the front glass panel, with a cable and other electronic stuff attatched.
Either way I don't think I'll be doing any of this work myself, I'll just take it up somewhere for her for the repairs.
Click to expand...
Click to collapse
It's honestly not all that difficult to do yourself. Hell, send me the phone and screen assembly, and I'll do it for free. Seriously. I'll even through in a couple TPU cases I'm not using.
If you do take it somewhere for repairs, make sure you ask what they're doing. Replacing the screen assembly, or replacing the digitizer. For a $100 fee, it could be either. They could buy a $20 digitizer and the remaining $80 is in labor, but it'll take them a lot of time and effort, or it could be a $45/$60 screen assembly that takes far less time and effort to do. Personally, it costing the same, I'd rather have the screen assembly replaced, since replacing only the digitizer can lead to complications. Since it has to be reglued onto the LCD, you might get bubbles, dust/lint, dead spots, and that rainbow affect when you hold it in the light at the right angle.

broke my screen!

Let a buddy hold my phone and my luck kicked in, he dropped it. It was a very light fall and only have it 2 cracks on the edge and one hairline Crack across the screen. Phone works fine and I can see and touch everything. I've heard it's pricey to replace the screen on this thing because the screen assembly is one piece? Meaning I can't just buy the glass? Any advice or helpful links to reputable sites would be greatly appreciated. I've always just bought a new phone when I Crack my screen but this phone cost too much to just sell off for cheap. Thanks in advance
I need some help guys. No repair shop will touch the phone without replacing the glass and lcd and charging $399. I've seen multiple people claim to have changed the glass only and looking online that part isn't expensive at all. If anyone can confirm their success I may make the attempt to do it my self. I've already spent $400 on this phone so I'd like to spend as little as possible to fix it
Called every shop I could and all said it would he anywhere from 350-400 for the whole lcd assembly. I asked every store (in my state and neighboring state) if they could just replace the glass and all said no. So my question is if anyone reading this has a link to a reputable site to get the lcd assembly, under $270 if possible. And lastly, if I buy the necessary tools and watch videos, what's the chances of messing up the phone replacing the WHOLE lcd assembly, if I've never used a heat gun to remove glass? I've replaced the lcd assembly on my lg g2 but the back being plastic eliminated the need for any heat. I'm lost and don't want to spend $400 more.
No way to replace only the glass without risking damage to the AMOLED screen or digitizer. The screen is glued together, and a slight force will cause the screen to shatter. If you want to take that risk, you can go ahead and look up a tutorial, but it seems to be very difficult to only replace the glass and not the entire assembly(Thats why repair shops don't do them as the chance of failure is too high)
Eric1084 said:
No way to replace only the glass without risking damage to the AMOLED screen or digitizer. The screen is glued together, and a slight force will cause the screen to shatter. If you want to take that risk, you can go ahead and look up a tutorial, but it seems to be very difficult to only replace the glass and not the entire assembly(Thats why repair shops don't do them as the chance of failure is too high)
Click to expand...
Click to collapse
What's the cheapest option? Buy the whole lcd assembly and change it my self? Or pay samsung and wait? I bought this second hand from a guy who come to find out still owed payments so no insurance route is possible. I'd have to send in my phone and wait
brd912 said:
What's the cheapest option? Buy the whole lcd assembly and change it my self? Or pay samsung and wait? I bought this second hand from a guy who come to find out still owed payments so no insurance route is possible. I'd have to send in my phone and wait
Click to expand...
Click to collapse
Well, cheapest option is to do as you said, replace the glass. But if you fail during the process, your only bet would be to replace the whole assembly, and even if you had warranty, that would be completely voided. So if you are going to replace the assembly anyway, might be worth a try to separate the glass, and replace only the glass. And if it fails, you can just replace the entire assembly. But if you plans to send it to Samsung anyway, I would suggest you to do that without any diy modification to the device. If you are planning to buy the assembly, make sure you get a genuine OEM screen. I saw a lot of fake China lcd assembly, and S7 have amoled at much better resolution.
I had a S6, and display while glueing? itself off, cracked the whole amoled screen completely. And Edge is even more dangerous. So all You can do is to pretty much either replace it Yourself (not too difficult if You ask me) but You will eventually make it not waterproof anymore. And You might break something while fixing it(like the paint or the back panel, although paint 90%) and then You will have to pay even more. Or just take it to repair service, pay.. I don't know. 50-100$ more and get a professional repair without any risk. And if it's going to be made by Samsung, You still might have waterproof phone after that. So I guess You should take it to a repair service. 50-100$ more, but trust me. You will most likely mess up the pain and ruin Your phone visually. As well as You will need to buy tiny screw drivers, some flat plastic tool, and adhesive tape. And sometimes using a hair dryer to open the back, will destroy some components inside. So be careful with that as well.
Or sell Your friends kidneys and pay for the repair
This sucks dude. I could literally purchase a nexus 6 for less than the price to fix this phone. I've looked at every phone out right now and nothing catches my eye like this one. I'd almost opt to buy the 3t before spending 400 to have a shop repair this one
If ur friend has insurance maybe they would pay for it. If not.
A new screen costs around 200$ from ebay or etrade supply. Those one come even without a samsung logo like the models in asia. Which imo looks super cool. If you a that screen transfering the old stuff isn't that hard. And there are many tutorials online. Maybe you could split? I mean he dropped it even if it's on accident he could give like 100$ then you have to spend 100$.
You could sell ur S7 edge. Trust me if it's just cracked and everything else is working you will find someone that buys it. In Germany you could get something between 250€~ 300€ for that. And then you spend again maybe 200€ and get a new or used one thats in good condition.
There are few options that you have. I wouldn't go to repair shops because they are often overpriced and don't treat ur stuff well.
And one last thing. Forget about replacing only the glas because that is impossible.
So if I buy the whole lcd assembly, all I need to do is heat up the back, cut the adhesive with a guitar pick, remove screws and unhook the connectors and replace?
yes exactly like that. like i said there are a ton of guides like on ifixit or on youtube. bur instead of a guitar pick i would you a playing card or pokemon card or something. the guitar pick or metal tools can scratch the backplate and the "sticker".

Categories

Resources