Let a buddy hold my phone and my luck kicked in, he dropped it. It was a very light fall and only have it 2 cracks on the edge and one hairline Crack across the screen. Phone works fine and I can see and touch everything. I've heard it's pricey to replace the screen on this thing because the screen assembly is one piece? Meaning I can't just buy the glass? Any advice or helpful links to reputable sites would be greatly appreciated. I've always just bought a new phone when I Crack my screen but this phone cost too much to just sell off for cheap. Thanks in advance
I need some help guys. No repair shop will touch the phone without replacing the glass and lcd and charging $399. I've seen multiple people claim to have changed the glass only and looking online that part isn't expensive at all. If anyone can confirm their success I may make the attempt to do it my self. I've already spent $400 on this phone so I'd like to spend as little as possible to fix it
Called every shop I could and all said it would he anywhere from 350-400 for the whole lcd assembly. I asked every store (in my state and neighboring state) if they could just replace the glass and all said no. So my question is if anyone reading this has a link to a reputable site to get the lcd assembly, under $270 if possible. And lastly, if I buy the necessary tools and watch videos, what's the chances of messing up the phone replacing the WHOLE lcd assembly, if I've never used a heat gun to remove glass? I've replaced the lcd assembly on my lg g2 but the back being plastic eliminated the need for any heat. I'm lost and don't want to spend $400 more.
No way to replace only the glass without risking damage to the AMOLED screen or digitizer. The screen is glued together, and a slight force will cause the screen to shatter. If you want to take that risk, you can go ahead and look up a tutorial, but it seems to be very difficult to only replace the glass and not the entire assembly(Thats why repair shops don't do them as the chance of failure is too high)
Eric1084 said:
No way to replace only the glass without risking damage to the AMOLED screen or digitizer. The screen is glued together, and a slight force will cause the screen to shatter. If you want to take that risk, you can go ahead and look up a tutorial, but it seems to be very difficult to only replace the glass and not the entire assembly(Thats why repair shops don't do them as the chance of failure is too high)
Click to expand...
Click to collapse
What's the cheapest option? Buy the whole lcd assembly and change it my self? Or pay samsung and wait? I bought this second hand from a guy who come to find out still owed payments so no insurance route is possible. I'd have to send in my phone and wait
brd912 said:
What's the cheapest option? Buy the whole lcd assembly and change it my self? Or pay samsung and wait? I bought this second hand from a guy who come to find out still owed payments so no insurance route is possible. I'd have to send in my phone and wait
Click to expand...
Click to collapse
Well, cheapest option is to do as you said, replace the glass. But if you fail during the process, your only bet would be to replace the whole assembly, and even if you had warranty, that would be completely voided. So if you are going to replace the assembly anyway, might be worth a try to separate the glass, and replace only the glass. And if it fails, you can just replace the entire assembly. But if you plans to send it to Samsung anyway, I would suggest you to do that without any diy modification to the device. If you are planning to buy the assembly, make sure you get a genuine OEM screen. I saw a lot of fake China lcd assembly, and S7 have amoled at much better resolution.
I had a S6, and display while glueing? itself off, cracked the whole amoled screen completely. And Edge is even more dangerous. So all You can do is to pretty much either replace it Yourself (not too difficult if You ask me) but You will eventually make it not waterproof anymore. And You might break something while fixing it(like the paint or the back panel, although paint 90%) and then You will have to pay even more. Or just take it to repair service, pay.. I don't know. 50-100$ more and get a professional repair without any risk. And if it's going to be made by Samsung, You still might have waterproof phone after that. So I guess You should take it to a repair service. 50-100$ more, but trust me. You will most likely mess up the pain and ruin Your phone visually. As well as You will need to buy tiny screw drivers, some flat plastic tool, and adhesive tape. And sometimes using a hair dryer to open the back, will destroy some components inside. So be careful with that as well.
Or sell Your friends kidneys and pay for the repair
This sucks dude. I could literally purchase a nexus 6 for less than the price to fix this phone. I've looked at every phone out right now and nothing catches my eye like this one. I'd almost opt to buy the 3t before spending 400 to have a shop repair this one
If ur friend has insurance maybe they would pay for it. If not.
A new screen costs around 200$ from ebay or etrade supply. Those one come even without a samsung logo like the models in asia. Which imo looks super cool. If you a that screen transfering the old stuff isn't that hard. And there are many tutorials online. Maybe you could split? I mean he dropped it even if it's on accident he could give like 100$ then you have to spend 100$.
You could sell ur S7 edge. Trust me if it's just cracked and everything else is working you will find someone that buys it. In Germany you could get something between 250€~ 300€ for that. And then you spend again maybe 200€ and get a new or used one thats in good condition.
There are few options that you have. I wouldn't go to repair shops because they are often overpriced and don't treat ur stuff well.
And one last thing. Forget about replacing only the glas because that is impossible.
So if I buy the whole lcd assembly, all I need to do is heat up the back, cut the adhesive with a guitar pick, remove screws and unhook the connectors and replace?
yes exactly like that. like i said there are a ton of guides like on ifixit or on youtube. bur instead of a guitar pick i would you a playing card or pokemon card or something. the guitar pick or metal tools can scratch the backplate and the "sticker".
Related
So I had been having some issues with flickering and creeking on my screen and intended to call in for a warranty, but kept putting it off. Eventually a hairline crack formed on the screen and it basically has bricked my device, as the touch screen is not working.
Google wouldn't cover it under warranty because of the crack, and suggested I contact ASUS about getting it repaired.
As inexpensive as the tablet is, I am wondering if it is even worth it to pay ASUS to fix it. Anyone have any experience with this?
Has anyone actually tried replacing the screen with parts off eBay or something? Is that possible? Or is the glued down screen not an easy fix. Any advice would be helpful.
If all else fails, now I have an excuse to get the refreshed version when it comes out
I'm not 100% sure, but I believe the screen replacement from Asus is around $150, which includes the labor. The LCD and digitizer comes and gets replaced as one whole piece. I've seen some non-OEM replacements for sale online, but I would only recommend you getting that if you are comfortable doing the repairs yourself. If you buy the digitizer by itself, prepare to spend some time prying the bad one apart from the LCD and vice versa.
Asus_USA said:
I'm not 100% sure, but I believe the screen replacement from Asus is around $150, which includes the labor. The LCD and digitizer comes and gets replaced as one whole piece. I've seen some non-OEM replacements for sale online, but I would only recommend you getting that if you are comfortable doing the repairs yourself. If you buy the digitizer by itself, prepare to spend some time prying the bad one apart from the LCD and vice versa.
Click to expand...
Click to collapse
At that price I might as well just buy a new one. Or hold off for the new version.
Normally I wouldn't be too comfortable fixing something like this myself, but since it is basically just a paper weight as it is I really don't have anything to lose. Best case scenario is it works and I learn a whole lot from doing it. Worst case scenario is I still have a non functioning tablet.
Besides, who can resist taking things apart?
If you've broken the screen on your week-old G3 (new rescue pup thought my TPU-covered G3 was a chew toy) and wondered whether to (a) try to fix it yourself with parts off the Internet, (b) take it to a local shop, or (c) ship it to LG for a "warranty" repair, here's my experience with the process.
There's nothing out there showing how to fix the G3 screen other than one shop's teardown that claims it's easy to fix G3 hardware issues (nothing about the screen though). Parts are posted all over the Internet and eBay, but they're all generic-looking stuff and who knows if the digitizer glass is really GG3. Prices of parts ranging $140 to $200, and I need both the digitizer glass and the LCD, maybe a front frame because it has a couple of small dings from the dog's teeth. Already dreading the price quotes from shops, since the QHD LCD must be more expensive than anything out there, and it's fairly new. Figuring that it will cost hundreds of dollars no matter who I have repair it, since that's what some shops quote for newer smartphones and tablets like the Galaxy S5 and Note 3, I decided to ship my G3 to LG so I wouldn't void what warranty I had left.
LG received the phone 7/28/14. The next day, they email me a diagnosis and repair quote since it's not covered by warranty (duh!).
It will cost $146 to repair, $153 to fully refurbish. Pretty much justifies not getting the insurance policy. YMMV, from what I read in the G2 forum about LG factory service (the parts/repair prices may vary depending on availability and demand).
So if you drop and break the screen of your precious new G3, then don't worry about how much it will cost to repair this relatively new device, if you are not too concerned about turnaround time.
jklew said:
If you've broken the screen on your week-old G3 (new rescue pup thought my TPU-covered G3 was a chew toy) and wondered whether to (a) try to fix it yourself with parts off the Internet, (b) take it to a local shop, or (c) ship it to LG for a "warranty" repair, here's my experience with the process.
There's nothing out there showing how to fix the G3 screen other than one shop's teardown that claims it's easy to fix G3 hardware issues (nothing about the screen though). Parts are posted all over the Internet and eBay, but they're all generic-looking stuff and who knows if the digitizer glass is really GG3. Prices of parts ranging $140 to $200, and I need both the digitizer glass and the LCD, maybe a front frame because it has a couple of small dings from the dog's teeth. Already dreading the price quotes from shops, since the QHD LCD must be more expensive than anything out there, and it's fairly new. Figuring that it will cost hundreds of dollars no matter who I have repair it, since that's what some shops quote for newer smartphones and tablets like the Galaxy S5 and Note 3, I decided to ship my G3 to LG so I wouldn't void what warranty I had left.
LG received the phone 7/28/14. The next day, they email me a diagnosis and repair quote since it's not covered by warranty (duh!).
It will cost $146 to repair, $153 to fully refurbish. Pretty much justifies not getting the insurance policy. YMMV, from what I read in the G2 forum about LG factory service (the parts/repair prices may vary depending on availability and demand).
So if you drop and break the screen of your precious new G3, then don't worry about how much it will cost to repair this relatively new device, if you are not too concerned about turnaround time.
Click to expand...
Click to collapse
The issue is that your phone loses approximately $5/day in value everyday. So even bigger loss each day its out of your hands ... So insurance isn't that bad! I really think with the life cycles of cell phones the G3 will be on craigslist for $250 in a few months !
Hey All,
My two bits...I dropped my G3 4 days in and destroyed the screen. As you can imagine I was pretty upset and concerned that I had just wasted $800 and had no clue what to do. I ended up finding a retailer online that sold the Oem screen, digitizer and casing for what ended up to be just over $200. With a little help from the disassembly video I tried to do myself. I am happy to report that it was unbelievably easy to complete the repair and I have a 100% working phone again. As the video shows you remove 13 screws, remove the two pieces of the backing and pull out the mother board. The only thing you need to do then it gently remove the vibrator, camera..front and rear, speaker, head phone jack and little daughter board. These are all stuck with two sided tape and just require a little light prying to remove. The replacement unit even had the two sided tape pre installed and you only had to remove the little plastic tabs that covered the sticky tape and then place each part in its corresponding place. I reassembled the phone and voila...a brand new working G3. The nice thing is the replacement was the case as well so the dings and dents from the drop on the case were all gone as well. So if you do the same don't be afraid to save the labour and do it yourself
imapfsr said:
Hey All,
My two bits...I dropped my G3 4 days in and destroyed the screen. As you can imagine I was pretty upset and concerned that I had just wasted $800 and had no clue what to do. I ended up finding a retailer online that sold the Oem screen, digitizer and casing for what ended up to be just over $200. With a little help from the disassembly video I tried to do myself. I am happy to report that it was unbelievably easy to complete the repair and I have a 100% working phone again. As the video shows you remove 13 screws, remove the two pieces of the backing and pull out the mother board. The only thing you need to do then it gently remove the vibrator, camera..front and rear, speaker, head phone jack and little daughter board. These are all stuck with two sided tape and just require a little light prying to remove. The replacement unit even had the two sided tape pre installed and you only had to remove the little plastic tabs that covered the sticky tape and then place each part in its corresponding place. I reassembled the phone and voila...a brand new working G3. The nice thing is the replacement was the case as well so the dings and dents from the drop on the case were all gone as well. So if you do the same don't be afraid to save the labour and do it yourself
Click to expand...
Click to collapse
Why on earth did you pay 800 for the g3 when they were only 599 on release day?
thegrants82 said:
Why on earth did you pay 800 for the g3 when they were only 599 on release day?
Click to expand...
Click to collapse
I purchased it from a reseller before it was released here and I also live in Canada where everything just costs a little more ?
thegrants82 said:
Why on earth did you pay 800 for the g3 when they were only 599 on release day?
Click to expand...
Click to collapse
Some things cost more in other countrys. And I also wanted a really good reseller in case anything happens. With quick and good support. without need to send it, wait two weeks etcetc.
And ye. Payed 800$ here in Sweden.
GG3
Reading this made me look up just what's so great about Corning's various hardened glass, and I've realised it's much more to do with being scratch-resistant than actually shatter proof. Funny how easily marketing will leave you stuck with the wrong (inflated) idea ... and, sure, scratch resistance is nice, but then that's why you buy a nice cheap case for your phone rather than put it in your pocket together with your keys.
armadafan271 said:
The issue is that your phone loses approximately $5/day in value everyday. So even bigger loss each day its out of your hands ... So insurance isn't that bad! I really think with the life cycles of cell phones the G3 will be on craigslist for $250 in a few months !
Click to expand...
Click to collapse
It won't be THAT cheap for a while. G2's were still going for like $400 up until the g3 launched.
jklew said:
If you've broken the screen on your week-old G3 (new rescue pup thought my TPU-covered G3 was a chew toy) and wondered whether to (a) try to fix it yourself with parts off the Internet, (b) take it to a local shop, or (c) ship it to LG for a "warranty" repair, here's my experience with the process.
There's nothing out there showing how to fix the G3 screen other than one shop's teardown that claims it's easy to fix G3 hardware issues (nothing about the screen though). Parts are posted all over the Internet and eBay, but they're all generic-looking stuff and who knows if the digitizer glass is really GG3. Prices of parts ranging $140 to $200, and I need both the digitizer glass and the LCD, maybe a front frame because it has a couple of small dings from the dog's teeth. Already dreading the price quotes from shops, since the QHD LCD must be more expensive than anything out there, and it's fairly new. Figuring that it will cost hundreds of dollars no matter who I have repair it, since that's what some shops quote for newer smartphones and tablets like the Galaxy S5 and Note 3, I decided to ship my G3 to LG so I wouldn't void what warranty I had left.
LG received the phone 7/28/14. The next day, they email me a diagnosis and repair quote since it's not covered by warranty (duh!).
It will cost $146 to repair, $153 to fully refurbish. Pretty much justifies not getting the insurance policy. YMMV, from what I read in the G2 forum about LG factory service (the parts/repair prices may vary depending on availability and demand).
So if you drop and break the screen of your precious new G3, then don't worry about how much it will cost to repair this relatively new device, if you are not too concerned about turnaround time.
Click to expand...
Click to collapse
How long did it take lg to send it back to you?
armadafan271 said:
The issue is that your phone loses approximately $5/day in value everyday. So even bigger loss each day its out of your hands ... So insurance isn't that bad! I really think with the life cycles of cell phones the G3 will be on craigslist for $250 in a few months !
Click to expand...
Click to collapse
Loses $5 a day in value a day lol??
That would mean my phone would be worth $0 in a month from now...
The value goes down more like .50 cents a day at most...
Amb669 said:
Loses $5 a day in value a day lol??
That would mean my phone would be worth $0 in a month from now...
The value goes down more like .50 cents a day at most...
Click to expand...
Click to collapse
In a couple months you will have to pay someone to take it from you.
Sent from my LG-D851 using XDA Free mobile app
LG G3 repair
The G3 is ten times easier to repair than the G2. The back comes right off like any other normal android phone. Remove the screws that you see holding the back on the midframe/bezel. remove the top half using a safety pry tool and do the same with the bottom half. Disconnect the two ribbon connections at bottom near charging port. Take out battery if you haven't already. Heat the back using heat gun or hairdryer. Heat front of assembly using the same heat gun or hairdryer. There are no other ribbons or connections to worry about at this point. Using iSesamo bar or other prying tool remove the broken assembly. (Note: There is no adhesive holding the LCD to the midframe so the removal is very easy.) Just pry around the top and sides of the phone and pull up at top then slide old LCD assembly out. Be sure to use a good 3M adeesive when putting in the new assembly. Connect the ribbons back to the board, close phone, power the phone on and enjoy. The whole process should take no more than half an hour if you ever done any previous repairs to another phone. Hit thanks if this helps
https://www.youtube.com/watch?v=I-LUBTADX2U
Thanks a ton for this thread. I may be able to repair my G3 now. It has been unusable for 3 months now cause I could not find anyone that would repair it.
I need to replace display with bazel
imapfsr said:
Hey All,
My two bits...I dropped my G3 4 days in and destroyed the screen. As you can imagine I was pretty upset and concerned that I had just wasted $800 and had no clue what to do. I ended up finding a retailer online that sold the Oem screen, digitizer and casing for what ended up to be just over $200. With a little help from the disassembly video I tried to do myself. I am happy to report that it was unbelievably easy to complete the repair and I have a 100% working phone again. As the video shows you remove 13 screws, remove the two pieces of the backing and pull out the mother board. The only thing you need to do then it gently remove the vibrator, camera..front and rear, speaker, head phone jack and little daughter board. These are all stuck with two sided tape and just require a little light prying to remove. The replacement unit even had the two sided tape pre installed and you only had to remove the little plastic tabs that covered the sticky tape and then place each part in its corresponding place. I reassembled the phone and voila...a brand new working G3. The nice thing is the replacement was the case as well so the dings and dents from the drop on the case were all gone as well. So if you do the same don't be afraid to save the labour and do it yourself
Click to expand...
Click to collapse
Hey I am trying to do the same thing you did.
My question is how hard was removing the daughter board? What tool and technique you used?
I can't find a video or tutorial where they remove the little daughter board and wanted to know how hard it is to remove before ordering parts.
It really was very easy, much easier than I expected. The daughter board was also pretty easy and I think I ended up using my finger and a guitar pick but anything small will suffice. The two sides sticky is really not that strong so just have patience when pulling those pieces out as they do come off pretty easy, Just use caution, you will be fine.
I need help to apply my pre-cut adhesive to my LG G3 D850
I bought an lg g3 d850 digitizer+lcd combo and a precut adhesive sticker for the model. Howwever, I am not sure how to apply the adhesive because there is less than 1 mm of room on the sides. What is the best approach for me to apply the pre -cut adhesive. Here is the link to the adhesive that I am talking about.
Will LG still repair your LG G3 even if you tried repairing it yourself? I tried ordering a new screen and putting it in myself but that didn't work so the lg g3 has been opened which voids warranty.
My wife's G3 developed this weird mark on the screen (always visible when the screen is on), and she claims to have never done anything like drop it in the tub or toilet... but it appears to be water damage to me. (See pic attached)
I put it in rice for a few weeks, and it's not going away... so I'm ready to try to fix it. Has anyone seen anything like this? Since the glass is still in good shape (it wasn't dropped or cracked)... what do I need to order to fix it?
I had the same concerns as the OP... buying a replacement LCD panel from Amazon or eBay, I wasn't sure if I'd get a full-res OEM replacement or a cheap knock-off. Can anyone point me to a reliable reseller (preferably on Amazon for several reasons) that would have the right parts to fix her phone up?
Thanks
The crack you see is in a tempered glass screen protector... not the screen itself.
Hai guys,
I have broken my glass on g3, display works fine but shuttered portion of screen is not fully functional, please can someone point me to reliable reseller, preferable on eBay, cos don't want to trash my money on knock-offs, I wanna real deal 100% OEM original display. So I need you guys from personal experience to point me in the right direction. Thx in advance!
Hello all,
I bought a Galaxy S4 for my partner, and stupidly didn't get it insured.
The screen got cracked quite badly, so fr £120 a local lad put a new screen on. Later that week it got dropped onto mud on the way to nursery and smashed entirely.
I now have a predicament, either give up the phone and go back to my sluggish s3, or ask you guys this question:
Where is the best and most value for money place to get a smashed screen fixed (you can't see anything just a rim of light) somewhere reputable that will use genuine parts and guarantee their work? I really don't want to just leave it on the shelf and am worried that without good advice I will end up with another shabby repair.
Your input would be greatly appreciated.
Many thanks and Happy Christmas,
Ric
If you only break the front glass like what happened to mine, you can get new glass for £5 and DIY. (If you're confident working on things like that - it is a bit of a nightmare of a job to separate the glass from the touch sensor)
But if there's no picture on the screen at all then you've killed it completely. A new full screen assembly is about £90 on eBay I think, so £120 is about the right price for someone to do it for you.
BTW, the first time you broke your screen, if you could still see the picture on the screen was fine, then the guy probably charged you £120 to change the £5 front glass. I've heard of people getting ripped off like that.
Most of the time it is just the front glass that is broken. Unfortunately this latest time, it sounds like you've been unlucky.
You could always take out phone insurance, leave it a couple of months, and then the screen breaks.
knuckles1978 said:
If you only break the front glass like what happened to mine, you can get new glass for £5 and DIY. (If you're confident working on things like that - it is a bit of a nightmare of a job to separate the glass from the touch sensor)
But if there's no picture on the screen at all then you've killed it completely. A new full screen assembly is about £90 on eBay I think, so £120 is about the right price for someone to do it for you.
BTW, the first time you broke your screen, if you could still see the picture on the screen was fine, then the guy probably charged you £120 to change the £5 front glass. I've heard of people getting ripped off like that.
Most of the time it is just the front glass that is broken. Unfortunately this latest time, it sounds like you've been unlucky.
You could always take out phone insurance, leave it a couple of months, and then the screen breaks.
Click to expand...
Click to collapse
ha, the first time the phone broke, my misses threw it against a metal door obliterating the top and matrix thingy so an extensive repair was required. I'm well aware of the £5 DIY jobby hairdryer thing but this second breaking is again both screens, and I don't want a shabby repair I want the original screen part so that it is as strong as it can possibly be. I paid this guy £120, but the screen was so weak it broke dropping on mud! SO I still need to know, where can I get it fixed with genuine Samsung parts? Samsung only? Are the any reputable companies members would use to have their £500 phones repaired?
Thanks to the guy that replied I can't see your name now I'm replying somehow...
In pretty sure there aren't any fake AMOLED screens, not like phones that use LCD - there are hundreds of fake LCD's for those phones. But there are fake front glass panels.
If I wanted to make sure that genuine parts were used I'd order the screen assembly up from eBay myself. You can order it up as a complete front assembly from eBay, and it's a very easy job to change the whole thing over yourself, if you're reasonably confident about tackling things like that. Just make sure it's described as 'Genuine Samsung', and not 'Samsung panel genuine for i9505' or suchlike. If it's described as 'Genuine Samsung', then you have comeback of its not.
I've fixed a good few phones though, and all the times I've ordered parts as I've described above, it has been the real deal. It's pretty easy to tell the fake front glass panels.
Changing the front glass only with hairdryer etc is a sh!tty job, but changing a whole front panel which has the chrome effect plastic trim piece, AMOLED, touch sensor, and front glass already assembled is a piece of p!ss...
I would totally recommend just getting it fixed... plenty of tutorials online to follow. Watch a few of them and see if it is something you are comfortable doing yourself. I've done it and found it to be quite simple. But, it all depends on your comfort level with repairing things...
I think getting it fixed is the idea, yes lol
I was saying though that since it's the whole thing that is broken and needs changed, and not just the front glass, the job is much easier. It's just a case of taking a few screws out and swapping the whole front assembly. On a difficulty rating out of 10 I give it a 4
If you watch a couple of videos on YouTube first, and you take it nice and carefully, I'd say this is a job that most people could handle.
Recently got a GS5 and my mom doesn't have a phone right now so I'm handing my N4 down to her. The front glass is cracked and I wanted to get that fixed before I do. The digitizer and lcd are not broken, just the glass, everything else looks and functions fine. I guess what my question is, if I take it to a repair shop can they just replace the front glass or am I looking at around 100ish to replace it all? I'll be going in and getting quoted but just wanted to see if I got any input from here first, it will likely be a week or so before I take it anywhere due to this damn weather.
wareju said:
Recently got a GS5 and my mom doesn't have a phone right now so I'm handing my N4 down to her. The front glass is cracked and I wanted to get that fixed before I do. The digitizer and lcd are not broken, just the glass, everything else looks and functions fine. I guess what my question is, if I take it to a repair shop can they just replace the front glass or am I looking at around 100ish to replace it all? I'll be going in and getting quoted but just wanted to see if I got any input from here first, it will likely be a week or so before I take it anywhere due to this damn weather.
Click to expand...
Click to collapse
The same thing happened with my friends N4. The glass, digitizer and LCD all had to be replaced as they all come as one unit. Cannot get them separately.
Amazon/ebay has parts where you can just order the LCD/Digitizer etc, but then to separate them you have to have a heat gun etc. if you touch any part by mistake you will get finger prints or smudges permanently. So not a good idea unless you are one of those super careful person. http://www.ebay.com/itm/LG-Nexus-4-...D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557
if you are handy, you can order the whole assembly online (amazon) for about 60 bucks or so) http://www.amazon.com/Touch-Screen-...r=8-1&keywords=nexus+4+lcd+screen+replacement
I personally got it replaced in So Flo for about 95 dollars + tax. I have been quoted about 140 at a chain fix up places.
bluesteve3 said:
The same thing happened with my friends N4. The glass, digitizer and LCD all had to be replaced as they all come as one unit. Cannot get them separately.
Click to expand...
Click to collapse
Sure they do. FYI, the "glass" is[ the digitizer. If "everything works", then technically all that needs replacing is the digitizer.
However, digitizer replacement is far from an easy thing to do. Not only does it require some specialist equipment (suction cups, heat gun, glue), you're probably going to screw it up unless you've done it before.
wareju said:
Recently got a GS5 and my mom doesn't have a phone right now so I'm handing my N4 down to her. The front glass is cracked and I wanted to get that fixed before I do. The digitizer and lcd are not broken, just the glass, everything else looks and functions fine. I guess what my question is, if I take it to a repair shop can they just replace the front glass or am I looking at around 100ish to replace it all? I'll be going in and getting quoted but just wanted to see if I got any input from here first, it will likely be a week or so before I take it anywhere due to this damn weather.
Click to expand...
Click to collapse
You can buy just the screen assembly off eBay for about $45, which has the digitizer already mated with the LCD. However, this requires removal from the bezel (again, a heat gun is recommended), then gluing the new one back in. For $60 you can get the entire front assembly (hey, brand new phone!), which is the easiest way to go about things. I'd also recommend buying a new battery ($20) and replacing the old, tired one while you've got the phone apart.
It's not all that difficult to do it yourself. You'll need a T5 TORX driver, something thin, sturdy and plastic to pry the phone halves apart (you can buy screen assemblies that come with all these tools), and some patience. Do everything on a fluffy white towel so the little screws don't get lost. The tricky part is the little rubber gasket thingy that goes over the proximity/light sensor module. Most people who have done a screen replacement have found that reassembly screws up the prox sensor, causing it to always read "near" (meaning during a call the screen will stay off and you can't hang up or use the dialer). The common fix is to put the gasket in backwards.
There are a number of threads here, some youtube videos, and a good teardown tutorial on ifixit.com.
I thought the digitizer was what recognized touch input? Either way I don't think I'll be doing any of this work myself, I'll just take it up somewhere for her for the repairs.
wareju said:
I thought the digitizer was what recognized touch input?
Click to expand...
Click to collapse
It is. It's built into the front panel of glass (which is made up of a bunch of different layers of stuff). Don't ask me how it works, it's all magic to me. But when you break the front glass, yet everything still works, that's the digitizer. If you look up digitizers on eBay you'll see that it's the front glass panel, with a cable and other electronic stuff attatched.
Either way I don't think I'll be doing any of this work myself, I'll just take it up somewhere for her for the repairs.
Click to expand...
Click to collapse
It's honestly not all that difficult to do yourself. Hell, send me the phone and screen assembly, and I'll do it for free. Seriously. I'll even through in a couple TPU cases I'm not using.
If you do take it somewhere for repairs, make sure you ask what they're doing. Replacing the screen assembly, or replacing the digitizer. For a $100 fee, it could be either. They could buy a $20 digitizer and the remaining $80 is in labor, but it'll take them a lot of time and effort, or it could be a $45/$60 screen assembly that takes far less time and effort to do. Personally, it costing the same, I'd rather have the screen assembly replaced, since replacing only the digitizer can lead to complications. Since it has to be reglued onto the LCD, you might get bubbles, dust/lint, dead spots, and that rainbow affect when you hold it in the light at the right angle.
hey i was wondering how difficult it is to replace just the front glass and digitizer on my S7E? mine is cracked at the bottom, the lcd and digitizer are both good, but the crack is getting worse and pieces are flaking off so i feel like if i dont fix it it might end up screwing up the lcd. I can get a glass/digitizer assembly for about 35 bucks, but if i buy this am i going to be able to install it without f*kn up my phone? ive been looking at youtube videos n stuff and pretty much every one i see theyre replacing the whole assembly with the lcd, which is like $200, is it possible to seperate the lcd from the glass/digitizer fairly easily at home? or should i just let it be and not mess with it?
Hi to be very honest here I've never ever had to replace or fix the glass to my $7 Edge, my $7 Edge is on excellent condition but I'm thinking of one day either updating to the Note 8 or even Note 9. Have you got any quotes yet from repair places
Sent from my SM-G935F using XDA-Developers Legacy app
BDog21 said:
hey i was wondering how difficult it is to replace just the front glass and digitizer on my S7E? mine is cracked at the bottom, the lcd and digitizer are both good, but the crack is getting worse and pieces are flaking off so i feel like if i dont fix it it might end up screwing up the lcd. I can get a glass/digitizer assembly for about 35 bucks, but if i buy this am i going to be able to install it without f*kn up my phone? ive been looking at youtube videos n stuff and pretty much every one i see theyre replacing the whole assembly with the lcd, which is like $200, is it possible to seperate the lcd from the glass/digitizer fairly easily at home? or should i just let it be and not mess with it?
Click to expand...
Click to collapse
On the newer phones is not really possible to separate the different layers on the display. (even back in the days when the layers where a lot easier to separate - it was hard, only on some displays and always the new layers started to separate leading to dust behind them and so on). You must change the whole screen as a one. Sorry... :/
Im a cell phone repair guy. Like stated above you must replace the entire digitizer/lcd assembly. They are pricey. If you have insurance it may be cheaper. Your looking at $200-$250 for a quality unit.
https://www.ebay.com/itm/LCD-Displa...hash=item4b178e5337:m:mtuyciust4Tmlx1CeklwU-g
Then you will want to get a good tool kit like so. Thats another $60
https://www.ifixit.com/Store/Tools/...pEP-Ge4NWU0H9RKOGFUtVKLOoWZ-d4BBoCMwkQAvD_BwE
Then you can follow this for teardown. Just remember you can damage more stuff when working the first time on something like this. It will cost even more money. It might just be better to use insurance or have a pro do it.
https://www.ifixit.com/Teardown/Samsung+Galaxy+S7+Edge+Teardown/56845
BDog21 said:
hey i was wondering how difficult it is to replace just the front glass and digitizer on my S7E? mine is cracked at the bottom, the lcd and digitizer are both good, but the crack is getting worse and pieces are flaking off so i feel like if i dont fix it it might end up screwing up the lcd. I can get a glass/digitizer assembly for about 35 bucks, but if i buy this am i going to be able to install it without f*kn up my phone? ive been looking at youtube videos n stuff and pretty much every one i see theyre replacing the whole assembly with the lcd, which is like $200, is it possible to seperate the lcd from the glass/digitizer fairly easily at home? or should i just let it be and not mess with it?
Click to expand...
Click to collapse
Well yeah its really hard to do it yourself, but changing only the glass is possible. I have tried it on my old samsung galaxy s6 edge. Although i have brought it to a repair shop which supports such change. They use a special separation machine. Try asking around your place. Btw, where you from?
awerqw22 said:
Well yeah its really hard to do it yourself, but changing only the glass is possible. I have tried it on my old samsung galaxy s6 edge. Although i have brought it to a repair shop which supports such change. They use a special separation machine. Try asking around your place. Btw, where you from?
Click to expand...
Click to collapse
nebraska
BDog21 said:
nebraska
Click to expand...
Click to collapse
So were continents away. Lol. Buy yeah its possible, with the right tools. You can do it yourself but its very risky. Some do it manually some use tools. Some separation machines use dry ice.
Also, remember that if you're replacing the entire OLED, glass and digitiser as a single unit, if you're buying a generic replacement rather than Samsung parts, the OLED panel in particular could easily be of inferior quality. Or perhaps not even OLED at all, rather a standard LCD replacement. I'd rather not think of this phone without the quality of screen it has, it's half the appeal and what makes it a premium device in the first place.
its possible, repair is done within 3h.
you can try it at home, you need slim cards and wire, but it's not worth the risk.
I paid 120$ in Poland for glass replacement. they have separating machine - it freeze the glue so it's easy to take the glass off the screen. later it's just loca or oca