Database Users

Screen crack

My kids were abusing my iconia and that has resulted into a crack appearing on one side of screen (left side) which extends from top to bottom. Though screen is working normally at the present.
Will it work like that continuously or it will stop functioning in future?
Can i replace it easily? and how much would it cost?

I believe if you search around here, someone has already posted a DIY article on replacing the screen. If not, I know someone has posted a repair manual for this thing in here as well.
As for the long term effects of having a cracked screen, I dunno...

usman3206 said:
Can i replace it easily? and how much would it cost?
Click to expand...
Click to collapse
The glass and the digitizer are glued together so hard that you cannot separate them, that means that both of them needs to get replaced. I don't know how expensive the digitizers are or where to get them, but they're not cheap, that I know.

i have seen them on ebay going for 80.00 and up to 200.00.acer will fix it for you for 195.95. this is there standard service charge for nearly any hardware repair on laptop/ tablet devices..
you just have to keep looking
Kids and expensive delicate touch devices are not compatible..

It's like a crack on a car windshield; it will inevitably expand to the whole screen. I wouldn't try to fix it. Use it or as long as you can while looking for a year-end sale on another one. The A500 and Tosh Thrive were selling for $200 during Black Friday, the Asus TF was for $250. There'll be more sales before the year is out.
If you want to recoup some of the money, open it up and disassemble the components, then hock the parts on eBay. The LCD subassembly is obviously in most demand, but all the rest are worth something.
For the kiddies, get a Nook Color and put CM7 on it. Robust construction, and it's currently $129.

Thanks to all of you for the feedback. yeah sure kids are not compatible with these things but then they like them so much, touch screen gives them a direct and personal feeling. Anyway thanks again.

Advice: Upgrade or repair

Hey guys
Ive had my nexus 4 for a while now, bought it when it came out a few years ago now. I had managed to keep it perfectly unharmed until i unfortunately dropped it the other day which cracked the screen and seemed to have killed the touchscreen.
The touchscreen now just doesn't work at all.
So my question was, do you reckon i should buy one of those screen repair kits, or something similar and attempt to fix the phone or go for an upgrade and try my luck finding a invite ticket and buying a OnePlus One? Just wondering what your opinions are.
Im stuck now with an iPhone 3gs! Tough times indeed.

lewis03 said:
Hey guys
Ive had my nexus 4 for a while now, bought it when it came out a few years ago now. I had managed to keep it perfectly unharmed until i unfortunately dropped it the other day which cracked the screen and seemed to have killed the touchscreen.
The touchscreen now just doesn't work at all.
So my question was, do you reckon i should buy one of those screen repair kits, or something similar and attempt to fix the phone or go for an upgrade and try my luck finding a invite ticket and buying a OnePlus One? Just wondering what your opinions are.
Click to expand...
Click to collapse
Replacing the screen assembly is actually relatively easy on the Nexus 4. Note that I said screen assembly, and not the digitizer. If you don't know, the glass "screen" is called the digitizer, which is glued to the LCD behind it. Now, it could be that all that actually needs replacing is the digitizer, but this is not an easy task, requires some specialist equipment, and you're still likely to screw it up. So I highly recommend going with the screen assembly, which is both the LCD and digitizer already ready to go.
You can get a new screen assembly off eBay. There are 2 different ways. One is just the screen assembly. It's cheaper, $45, but it requires that you remove the old one from the bezel, which can be a PITA. The other way is the full front assembly, which means you're getting the screen assembly already glued in to a brand new bezel. $60, a lot less hassle, and your entire front will be new and shiny and ding/scratch free again. Obviously, this is the choice I'd recommend (I've done it myself).
Might as well get a new battery while you're at it, for $20. At this point in its life, you've likely charged your phone several hundreds of times. Li-ion batteries will lose upwards of 20% of their original capacity after ~500 "cycles".
ifixit.com has some great tear-down photos, and there's a number of guides on youtube. It might sound a bit daunting, but it's a lot easier than you might think, at least with this phone.
I can't tell you whether you should just get a new phone or not - I don't know your situation, finances, urges, etc. But I will say that for a mere $80 you will practically have a new Nexus 4. Stick around, learn how to flash custom ROMs and kernels (if you don't already), and you very much will have a new phone. Or a great back-up to your new one.
Im stuck now with an iPhone 3gs! Tough times indeed.
Click to expand...
Click to collapse
Ouch.

Planterz said:
Replacing the screen assembly is actually relatively easy on the Nexus 4. Note that I said screen assembly, and not the digitizer. If you don't know, the glass "screen" is called the digitizer, which is glued to the LCD behind it. Now, it could be that all that actually needs replacing is the digitizer, but this is not an easy task, requires some specialist equipment, and you're still likely to screw it up. So I highly recommend going with the screen assembly, which is both the LCD and digitizer already ready to go.
You can get a new screen assembly off eBay. There are 2 different ways. One is just the screen assembly. It's cheaper, $45, but it requires that you remove the old one from the bezel, which can be a PITA. The other way is the full front assembly, which means you're getting the screen assembly already glued in to a brand new bezel. $60, a lot less hassle, and your entire front will be new and shiny and ding/scratch free again. Obviously, this is the choice I'd recommend (I've done it myself).
Might as well get a new battery while you're at it, for $20. At this point in its life, you've likely charged your phone several hundreds of times. Li-ion batteries will lose upwards of 20% of their original capacity after ~500 "cycles".
ifixit.com has some great tear-down photos, and there's a number of guides on youtube. It might sound a bit daunting, but it's a lot easier than you might think, at least with this phone.
I can't tell you whether you should just get a new phone or not - I don't know your situation, finances, urges, etc. But I will say that for a mere $80 you will practically have a new Nexus 4. Stick around, learn how to flash custom ROMs and kernels (if you don't already), and you very much will have a new phone. Or a great back-up to your new one.
Ouch.
Click to expand...
Click to collapse
Thanks for the great response! I think im going to revive my Nexus 4! Or at least try to It should be fun anyway taking it all apart!
Thanks for all your help!!

lewis03 said:
Thanks for the great response! I think im going to revive my Nexus 4! Or at least try to It should be fun anyway taking it all apart!
Thanks for all your help!!
Click to expand...
Click to collapse
If you need any assistance with dis/reassembly, I'm more than happy to help. I've had my Nexus 4 apart probably a few dozen times. Most important thing is to go slowly. Don't lose screws, and don't lose the tiny rubber gasket that's part off the proximity/ambient light sensor module. If, after reassembly, your screen goes black when making a call (and it's not against your ear), take it apart again and put the rubber gasket in backwards.

I had same problem. Please not that ebay china sellers are not selling oem displays and there are huge difference in terms of quality. I myself bought original oem LG from Germany, but it costed 100$
p.s. found him http://www.ebay.de/itm/Original-LG-...284?pt=DE_Handy_PDA_Akkus&hash=item35d533c834
Stickers, numbers on chasis all looked legit.

Anyone gone through front glass replacement?

Recently got a GS5 and my mom doesn't have a phone right now so I'm handing my N4 down to her. The front glass is cracked and I wanted to get that fixed before I do. The digitizer and lcd are not broken, just the glass, everything else looks and functions fine. I guess what my question is, if I take it to a repair shop can they just replace the front glass or am I looking at around 100ish to replace it all? I'll be going in and getting quoted but just wanted to see if I got any input from here first, it will likely be a week or so before I take it anywhere due to this damn weather.

wareju said:
Recently got a GS5 and my mom doesn't have a phone right now so I'm handing my N4 down to her. The front glass is cracked and I wanted to get that fixed before I do. The digitizer and lcd are not broken, just the glass, everything else looks and functions fine. I guess what my question is, if I take it to a repair shop can they just replace the front glass or am I looking at around 100ish to replace it all? I'll be going in and getting quoted but just wanted to see if I got any input from here first, it will likely be a week or so before I take it anywhere due to this damn weather.
Click to expand...
Click to collapse
The same thing happened with my friends N4. The glass, digitizer and LCD all had to be replaced as they all come as one unit. Cannot get them separately.

Amazon/ebay has parts where you can just order the LCD/Digitizer etc, but then to separate them you have to have a heat gun etc. if you touch any part by mistake you will get finger prints or smudges permanently. So not a good idea unless you are one of those super careful person. http://www.ebay.com/itm/LG-Nexus-4-...D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557
if you are handy, you can order the whole assembly online (amazon) for about 60 bucks or so) http://www.amazon.com/Touch-Screen-...r=8-1&keywords=nexus+4+lcd+screen+replacement
I personally got it replaced in So Flo for about 95 dollars + tax. I have been quoted about 140 at a chain fix up places.

bluesteve3 said:
The same thing happened with my friends N4. The glass, digitizer and LCD all had to be replaced as they all come as one unit. Cannot get them separately.
Click to expand...
Click to collapse
Sure they do. FYI, the "glass" is[ the digitizer. If "everything works", then technically all that needs replacing is the digitizer.
However, digitizer replacement is far from an easy thing to do. Not only does it require some specialist equipment (suction cups, heat gun, glue), you're probably going to screw it up unless you've done it before.
wareju said:
Recently got a GS5 and my mom doesn't have a phone right now so I'm handing my N4 down to her. The front glass is cracked and I wanted to get that fixed before I do. The digitizer and lcd are not broken, just the glass, everything else looks and functions fine. I guess what my question is, if I take it to a repair shop can they just replace the front glass or am I looking at around 100ish to replace it all? I'll be going in and getting quoted but just wanted to see if I got any input from here first, it will likely be a week or so before I take it anywhere due to this damn weather.
Click to expand...
Click to collapse
You can buy just the screen assembly off eBay for about $45, which has the digitizer already mated with the LCD. However, this requires removal from the bezel (again, a heat gun is recommended), then gluing the new one back in. For $60 you can get the entire front assembly (hey, brand new phone!), which is the easiest way to go about things. I'd also recommend buying a new battery ($20) and replacing the old, tired one while you've got the phone apart.
It's not all that difficult to do it yourself. You'll need a T5 TORX driver, something thin, sturdy and plastic to pry the phone halves apart (you can buy screen assemblies that come with all these tools), and some patience. Do everything on a fluffy white towel so the little screws don't get lost. The tricky part is the little rubber gasket thingy that goes over the proximity/light sensor module. Most people who have done a screen replacement have found that reassembly screws up the prox sensor, causing it to always read "near" (meaning during a call the screen will stay off and you can't hang up or use the dialer). The common fix is to put the gasket in backwards.
There are a number of threads here, some youtube videos, and a good teardown tutorial on ifixit.com.

I thought the digitizer was what recognized touch input? Either way I don't think I'll be doing any of this work myself, I'll just take it up somewhere for her for the repairs.

wareju said:
I thought the digitizer was what recognized touch input?
Click to expand...
Click to collapse
It is. It's built into the front panel of glass (which is made up of a bunch of different layers of stuff). Don't ask me how it works, it's all magic to me. But when you break the front glass, yet everything still works, that's the digitizer. If you look up digitizers on eBay you'll see that it's the front glass panel, with a cable and other electronic stuff attatched.
Either way I don't think I'll be doing any of this work myself, I'll just take it up somewhere for her for the repairs.
Click to expand...
Click to collapse
It's honestly not all that difficult to do yourself. Hell, send me the phone and screen assembly, and I'll do it for free. Seriously. I'll even through in a couple TPU cases I'm not using.
If you do take it somewhere for repairs, make sure you ask what they're doing. Replacing the screen assembly, or replacing the digitizer. For a $100 fee, it could be either. They could buy a $20 digitizer and the remaining $80 is in labor, but it'll take them a lot of time and effort, or it could be a $45/$60 screen assembly that takes far less time and effort to do. Personally, it costing the same, I'd rather have the screen assembly replaced, since replacing only the digitizer can lead to complications. Since it has to be reglued onto the LCD, you might get bubbles, dust/lint, dead spots, and that rainbow affect when you hold it in the light at the right angle.

[Q] Replace digitizer or whole screen?

Long story short, I have a LG G2 VS980W with a busted digitizer and glass. The LCD screen is fine, as there is no discoloration or dead pixels.
If I get it working, it will be used as a toy. I don't want to make a huge investment in it, hence not getting it done by someone else, but I would like it to be as easy as possible. I have no issue going into the components and swapping things within the phone itself, and I have looked up a number of dissemble replacement guides and videos and deal comfortable doing it myself.I have no issue opening the phone, but I never swapped out a digitizer or screen.
Would it be better for me to try and swap out just the digitizer, or get an already assembled screen, digitizer, and glass to replace it all at once?

I'd say you should get a new screen. I got one for pretty cheap Ebay and it's working great.
The screen is pretty easy to break/crack while removing the digitizer.
I bought a Z3 to do this but the screen was shattered (my father, who did this fixes phones/laptops)
Even for experienced people, it is a tough job.
There's a high chance of cracking the glass and ending up wasting your time and money.
I am typing this as I wait for a whole LCD + digitizer assembly for the Z3 lol

Changing this kind of digitizers takes a LOT of patience, a good heater, and the correct tools.
I personally opened like 10 phones already and always perfect, thoug I know my limits and know that I don't have what it takes. ( the phone whould end up smashing the wall for sure )

Seems like spending a little more for the set is easier and safer in terms of me damaging something with this little repair.

Just ordered a replacement LCD, digitizer, glass, and frame off E-Bay for the LG G2!
It was $55, $5 more then without the frame. Having the frame not only makes installing it easier & I don't need to worry about the cracks that are on the current one!
It's coming from China, so hopefully in about two or three weeks I'll have a brand new toy!
Thanks for the input sjk971005 and Chonwey!

broke my screen!

Let a buddy hold my phone and my luck kicked in, he dropped it. It was a very light fall and only have it 2 cracks on the edge and one hairline Crack across the screen. Phone works fine and I can see and touch everything. I've heard it's pricey to replace the screen on this thing because the screen assembly is one piece? Meaning I can't just buy the glass? Any advice or helpful links to reputable sites would be greatly appreciated. I've always just bought a new phone when I Crack my screen but this phone cost too much to just sell off for cheap. Thanks in advance

I need some help guys. No repair shop will touch the phone without replacing the glass and lcd and charging $399. I've seen multiple people claim to have changed the glass only and looking online that part isn't expensive at all. If anyone can confirm their success I may make the attempt to do it my self. I've already spent $400 on this phone so I'd like to spend as little as possible to fix it

Called every shop I could and all said it would he anywhere from 350-400 for the whole lcd assembly. I asked every store (in my state and neighboring state) if they could just replace the glass and all said no. So my question is if anyone reading this has a link to a reputable site to get the lcd assembly, under $270 if possible. And lastly, if I buy the necessary tools and watch videos, what's the chances of messing up the phone replacing the WHOLE lcd assembly, if I've never used a heat gun to remove glass? I've replaced the lcd assembly on my lg g2 but the back being plastic eliminated the need for any heat. I'm lost and don't want to spend $400 more.

No way to replace only the glass without risking damage to the AMOLED screen or digitizer. The screen is glued together, and a slight force will cause the screen to shatter. If you want to take that risk, you can go ahead and look up a tutorial, but it seems to be very difficult to only replace the glass and not the entire assembly(Thats why repair shops don't do them as the chance of failure is too high)

Eric1084 said:
No way to replace only the glass without risking damage to the AMOLED screen or digitizer. The screen is glued together, and a slight force will cause the screen to shatter. If you want to take that risk, you can go ahead and look up a tutorial, but it seems to be very difficult to only replace the glass and not the entire assembly(Thats why repair shops don't do them as the chance of failure is too high)
Click to expand...
Click to collapse
What's the cheapest option? Buy the whole lcd assembly and change it my self? Or pay samsung and wait? I bought this second hand from a guy who come to find out still owed payments so no insurance route is possible. I'd have to send in my phone and wait

brd912 said:
What's the cheapest option? Buy the whole lcd assembly and change it my self? Or pay samsung and wait? I bought this second hand from a guy who come to find out still owed payments so no insurance route is possible. I'd have to send in my phone and wait
Click to expand...
Click to collapse
Well, cheapest option is to do as you said, replace the glass. But if you fail during the process, your only bet would be to replace the whole assembly, and even if you had warranty, that would be completely voided. So if you are going to replace the assembly anyway, might be worth a try to separate the glass, and replace only the glass. And if it fails, you can just replace the entire assembly. But if you plans to send it to Samsung anyway, I would suggest you to do that without any diy modification to the device. If you are planning to buy the assembly, make sure you get a genuine OEM screen. I saw a lot of fake China lcd assembly, and S7 have amoled at much better resolution.

I had a S6, and display while glueing? itself off, cracked the whole amoled screen completely. And Edge is even more dangerous. So all You can do is to pretty much either replace it Yourself (not too difficult if You ask me) but You will eventually make it not waterproof anymore. And You might break something while fixing it(like the paint or the back panel, although paint 90%) and then You will have to pay even more. Or just take it to repair service, pay.. I don't know. 50-100$ more and get a professional repair without any risk. And if it's going to be made by Samsung, You still might have waterproof phone after that. So I guess You should take it to a repair service. 50-100$ more, but trust me. You will most likely mess up the pain and ruin Your phone visually. As well as You will need to buy tiny screw drivers, some flat plastic tool, and adhesive tape. And sometimes using a hair dryer to open the back, will destroy some components inside. So be careful with that as well.
Or sell Your friends kidneys and pay for the repair

This sucks dude. I could literally purchase a nexus 6 for less than the price to fix this phone. I've looked at every phone out right now and nothing catches my eye like this one. I'd almost opt to buy the 3t before spending 400 to have a shop repair this one

If ur friend has insurance maybe they would pay for it. If not.
A new screen costs around 200$ from ebay or etrade supply. Those one come even without a samsung logo like the models in asia. Which imo looks super cool. If you a that screen transfering the old stuff isn't that hard. And there are many tutorials online. Maybe you could split? I mean he dropped it even if it's on accident he could give like 100$ then you have to spend 100$.
You could sell ur S7 edge. Trust me if it's just cracked and everything else is working you will find someone that buys it. In Germany you could get something between 250€~ 300€ for that. And then you spend again maybe 200€ and get a new or used one thats in good condition.
There are few options that you have. I wouldn't go to repair shops because they are often overpriced and don't treat ur stuff well.
And one last thing. Forget about replacing only the glas because that is impossible.

So if I buy the whole lcd assembly, all I need to do is heat up the back, cut the adhesive with a guitar pick, remove screws and unhook the connectors and replace?

yes exactly like that. like i said there are a ton of guides like on ifixit or on youtube. bur instead of a guitar pick i would you a playing card or pokemon card or something. the guitar pick or metal tools can scratch the backplate and the "sticker".