the touch screen stop working after the glass rom install
what can I do?
thanks
mine too
anyone have a solution pleaseeee
Installing different rom won't help?
guilo said:
the touch screen stop working after the glass rom install
what can I do?
thanks
Click to expand...
Click to collapse
touch.dll error?
LCD or digitizer cable is your prolem if it does not work in any rom
surprising!
because of desperate, ive smashed my BA with my hand, and surprisingly the touchscreen went normal again... how weird!
for senior: can u tell me about my BA problem?
after flash a rom worked for 2 hours normal then the touch screen dead ??? any body can help me with that please ,, sorry for my bad english
What rom?
Try hard resetting or reflashing the Rom
thanks
duprade said:
What rom?
Try hard resetting or reflashing the Rom
Click to expand...
Click to collapse
thanks for the answer but i tried to reflash the rom and hard reset but with no results, i think its a hardware problem ?????
I had a wing and the touch screen stopped working on it for no reason... so it may be hardware
duprade said:
I had a wing and the touch screen stopped working on it for no reason... so it may be hardware
Click to expand...
Click to collapse
and did you fix it ??
did you put a new touch screen protector?
have you tried to flash a different ROM?
if it's a hardware problem, then you might have to send your phone to service center...or install new lcd touch screen by yourself
tareq557 said:
and did you fix it ??
Click to expand...
Click to collapse
no, I had to get it replaced.
mv3 said:
did you put a new touch screen protector?
no i didnt
have you tried to flash a different ROM?
yes i tried but still not work
if it's a hardware problem, then you might have to send your phone to service center...or install new lcd touch screen by yourself
Click to expand...
Click to collapse
yes i think its a hardware problem
and how to install it Please !! I tried some but no direct link all broken so far
Newbs guide!!!!!!!!!!!!!
esther4508 said:
and how to install it Please !! I tried some but no direct link all broken so far
Click to expand...
Click to collapse
read bnewbs guide to herald modifacation. It is stickied and is the first post. You must install a touch it rom first that comes with touch flo.
i installed touch it 5.2 original and could not get touchflo to work for the life of me.
Dasher8478r3 said:
read bnewbs guide to herald modifacation. It is stickied and is the first post. You must install a touch it rom first that comes with touch flo.
Click to expand...
Click to collapse
Don't speak unless you know what the hell you are talking about. You can install Touch-Flo without installing a full ROM
@wyld
Did you try adjusting the settings in the Advanced Config program?
See if TouchFlo is disabled in Touch-IT.
momentarylapseofreason said:
Don't speak unless you know what the hell you are talking about. You can install Touch-Flo without installing a full ROM
Click to expand...
Click to collapse
Would you mind posting a link to this this Touch-Flo?
hi experts here,
when i go to Today to disable my touchflo 3D and click OK. It prompt me an error, "A problem has occured with manile.exe." If i go to Today and enable again the Touchflo, the TouchFlo failed to launch, i need to do a softreset , only then the TouchFlow will come back.
What is wrong?Did anyone encouter this error also?
do i need to hardreset my HD?
Do you need/have you done the HTC hotfix?
Kangburra said:
Do you need/have you done the HTC hotfix?
Click to expand...
Click to collapse
yes... i just done the hotfix last night. but, before that, i never tried to disable the touchflo. but, i don think the hotfix will screw up this ,right?
the application i have installed as below:
1. HD Tweak
2. G-alarm
3. Touchpal 3.5
4. Resco explorer 2008
5. .net 3.5 framework
6. ce-star
7. some games
is it possible because of some application above crash with the touchflow? but seems like those application i installed is quite common to hd.
My first suspect would be .net, have you installed the .net config tool, I would try that first.
If not check with other HDTweak users if they can disable and enable Touch Flo.
Kangburra said:
My first suspect would be .net, have you installed the .net config tool, I would try that first.
If not check with other HDTweak users if they can disable and enable Touch Flo.
Click to expand...
Click to collapse
hi, i didn't install any .net config tool in my device, i only the hd tweak and .net framework...crapppppppppppp...
thanks for ur reply..
try it without g-alarm, maybe it helps
Lazy79 said:
try it without g-alarm, maybe it helps
Click to expand...
Click to collapse
thanks for ur reply.
but, i have just done the hard reset, but the problem still persist, same error msg when i disable the touchflo and click on the OK button. after enable the touchflo, but it is still fail to launch. need to do softreset.
i haven install any application or make any tweak when i disable the touchflo..crap....
what i should do now? i already done the hardreset.....
Before you install anything, install the HTC hotfix, see if that solves it.
Does it still happen if you remove the SD card as well?
Kangburra said:
Before you install anything, install the HTC hotfix, see if that solves it.
Click to expand...
Click to collapse
tested...but not working...
rhtizzy said:
Does it still happen if you remove the SD card as well?
Click to expand...
Click to collapse
tested, it is not working as well...
I'd do another hard reset just in case, and if it still doesn't work perhaps upgrading to the newer 1.19ROM might do the trick (and not cost you your warranty)
Edit:
scratch that, upgrading means hard spl and that's non-standard
rhtizzy said:
I'd do another hard reset just in case, and if it still doesn't work perhaps upgrading to the newer 1.19ROM might do the trick (and not cost you your warranty)
Edit:
scratch that, upgrading means hard spl and that's non-standard
Click to expand...
Click to collapse
i have done 2 or 3 tiimes hard reset, but still the same.
they is no new official 1.19 ROM yet,right?
check this http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
alexwai said:
hi experts here,
when i go to Today to disable my touchflo 3D and click OK. It prompt me an error, "A problem has occured with manile.exe." If i go to Today and enable again the Touchflo, the TouchFlo failed to launch, i need to do a softreset , only then the TouchFlow will come back.
What is wrong?Did anyone encouter this error also?
do i need to hardreset my HD?
Click to expand...
Click to collapse
Alex, what's the version of your ROM? May be those with the same ROM version as yours could do a test and see if that also happen to theirs. Your problem could not be produced in my device.
eaglesteve said:
Alex, what's the version of your ROM? May be those with the same ROM version as yours could do a test and see if that also happen to theirs. Your problem could not be produced in my device.
Click to expand...
Click to collapse
hi eaglesteve,
my ROM is v1.18.723.2, what about yours?
any one got the solution already?
alexwai said:
hi eaglesteve,
my ROM is v1.18.723.2, what about yours?
any one got the solution already?
Click to expand...
Click to collapse
Mine stock ROM was a 1.14x, but now I'm trying out a cooked ROM with v.19.831.0.
Wonder if other V.1.18.723.2 users are having same problem as yours. Anyone?
eaglesteve said:
Mine stock ROM was a 1.14x, but now I'm trying out a cooked ROM with v.19.831.0.
Wonder if other V.1.18.723.2 users are having same problem as yours. Anyone?
Click to expand...
Click to collapse
after flash to the cooked ROM, the warranty will be voided ,right? u flash to the cooked ROM already?
alexwai said:
after flash to the cooked ROM, the warranty will be voided ,right? u flash to the cooked ROM already?
Click to expand...
Click to collapse
There is a way to revert back to the original. If you don't try, you will never know which ROM is better, will you?
eaglesteve said:
There is a way to revert back to the original. If you don't try, you will never know which ROM is better, will you?
Click to expand...
Click to collapse
yes, i heard that some cooked do much better than the official ROM.
can u teach me or guide me how to flash and revert back to the original one?
i am new to pda, never try this before...
Hi there,i tried upgrading me blackstone using this ..RUU_Dutty_s_HD_WM6.5_R7_5.2.23007.5.3.0_1.59.709.0_Radio_52.62.25.34_1.14.25.24_MV2.5_Thriller_1
i did as i was told,but the screen lights up funny and also the touch screen doesnt work.I also cant get no network .Please help.How can i fix it.
Thanks
Sookesh said:
Hi there,i tried upgrading me blackstone using this ..RUU_Dutty_s_HD_WM6.5_R7_5.2.23007.5.3.0_1.59.709.0_Radio_52.62.25.34_1.14.25.24_MV2.5_Thriller_1
i did as i was told,but the screen lights up funny and also the touch screen doesnt work.I also cant get no network .Please help.How can i fix it.
Thanks
Click to expand...
Click to collapse
Did you upgrade you SPL to 1.56 first?
Read crackwhores guide in my signature
Sookesh said:
Hi there,i tried upgrading me blackstone using this ..RUU_Dutty_s_HD_WM6.5_R7_5.2.23007.5.3.0_1.59.709.0_Radio_52.62.25.34_1.14.25.24_MV2.5_Thriller_1
i did as i was told,but the screen lights up funny and also the touch screen doesnt work.I also cant get no network .Please help.How can i fix it.
Thanks
Click to expand...
Click to collapse
follow the instructions here --> cRaCKwHoRe's Blackstone Flashing Tutorial. simply stated, you have not (yet) followed all the steps to flash Dutty's ROM. retrace your steps and try again. good luck!
Thanks
Thanks man ....i didnt flash it at first....thank a bunch...