Related
Hi, guys!
How can I install new touch cube in my device?
I try to install FTOUCHflo but it doesn't install it.
Oh! It is very simple, just click on SEARCH and then start reading.
Already done.
No results
The SCLPF cube is not an exact copy (in some ways it is better) or you can use Kona's cube, both are in this forum.
matiu said:
Already done.
No results
Click to expand...
Click to collapse
You allready read the whole 76 pages of this thread?
And you still don't know how to install it?
Well I would suggest you to send your device to efrost, and donate 100 bucks, I'm sure he would be able to find a way to put it on your device...
If not I suggest you read the whole thread, read the instructions, and if you got questions, asked in that thread itselfs...
Good Luck
I was told to download SDKcert (.cab) to confirm the missing certificates that prevented the installation on my dual touch.
I used the "SEARCH" of the forum, then the research, advanced research in a single post and then google but have found NOTHING download.
So kindly tell me where someone could possibly get it without having to read 76 pages to find it?
Thanks.
get the sdkcert at www.cinetsystems.com/xda
u can also use msigner
hi experts here,
when i go to Today to disable my touchflo 3D and click OK. It prompt me an error, "A problem has occured with manile.exe." If i go to Today and enable again the Touchflo, the TouchFlo failed to launch, i need to do a softreset , only then the TouchFlow will come back.
What is wrong?Did anyone encouter this error also?
do i need to hardreset my HD?
Do you need/have you done the HTC hotfix?
Kangburra said:
Do you need/have you done the HTC hotfix?
Click to expand...
Click to collapse
yes... i just done the hotfix last night. but, before that, i never tried to disable the touchflo. but, i don think the hotfix will screw up this ,right?
the application i have installed as below:
1. HD Tweak
2. G-alarm
3. Touchpal 3.5
4. Resco explorer 2008
5. .net 3.5 framework
6. ce-star
7. some games
is it possible because of some application above crash with the touchflow? but seems like those application i installed is quite common to hd.
My first suspect would be .net, have you installed the .net config tool, I would try that first.
If not check with other HDTweak users if they can disable and enable Touch Flo.
Kangburra said:
My first suspect would be .net, have you installed the .net config tool, I would try that first.
If not check with other HDTweak users if they can disable and enable Touch Flo.
Click to expand...
Click to collapse
hi, i didn't install any .net config tool in my device, i only the hd tweak and .net framework...crapppppppppppp...
thanks for ur reply..
try it without g-alarm, maybe it helps
Lazy79 said:
try it without g-alarm, maybe it helps
Click to expand...
Click to collapse
thanks for ur reply.
but, i have just done the hard reset, but the problem still persist, same error msg when i disable the touchflo and click on the OK button. after enable the touchflo, but it is still fail to launch. need to do softreset.
i haven install any application or make any tweak when i disable the touchflo..crap....
what i should do now? i already done the hardreset.....
Before you install anything, install the HTC hotfix, see if that solves it.
Does it still happen if you remove the SD card as well?
Kangburra said:
Before you install anything, install the HTC hotfix, see if that solves it.
Click to expand...
Click to collapse
tested...but not working...
rhtizzy said:
Does it still happen if you remove the SD card as well?
Click to expand...
Click to collapse
tested, it is not working as well...
I'd do another hard reset just in case, and if it still doesn't work perhaps upgrading to the newer 1.19ROM might do the trick (and not cost you your warranty)
Edit:
scratch that, upgrading means hard spl and that's non-standard
rhtizzy said:
I'd do another hard reset just in case, and if it still doesn't work perhaps upgrading to the newer 1.19ROM might do the trick (and not cost you your warranty)
Edit:
scratch that, upgrading means hard spl and that's non-standard
Click to expand...
Click to collapse
i have done 2 or 3 tiimes hard reset, but still the same.
they is no new official 1.19 ROM yet,right?
check this http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
alexwai said:
hi experts here,
when i go to Today to disable my touchflo 3D and click OK. It prompt me an error, "A problem has occured with manile.exe." If i go to Today and enable again the Touchflo, the TouchFlo failed to launch, i need to do a softreset , only then the TouchFlow will come back.
What is wrong?Did anyone encouter this error also?
do i need to hardreset my HD?
Click to expand...
Click to collapse
Alex, what's the version of your ROM? May be those with the same ROM version as yours could do a test and see if that also happen to theirs. Your problem could not be produced in my device.
eaglesteve said:
Alex, what's the version of your ROM? May be those with the same ROM version as yours could do a test and see if that also happen to theirs. Your problem could not be produced in my device.
Click to expand...
Click to collapse
hi eaglesteve,
my ROM is v1.18.723.2, what about yours?
any one got the solution already?
alexwai said:
hi eaglesteve,
my ROM is v1.18.723.2, what about yours?
any one got the solution already?
Click to expand...
Click to collapse
Mine stock ROM was a 1.14x, but now I'm trying out a cooked ROM with v.19.831.0.
Wonder if other V.1.18.723.2 users are having same problem as yours. Anyone?
eaglesteve said:
Mine stock ROM was a 1.14x, but now I'm trying out a cooked ROM with v.19.831.0.
Wonder if other V.1.18.723.2 users are having same problem as yours. Anyone?
Click to expand...
Click to collapse
after flash to the cooked ROM, the warranty will be voided ,right? u flash to the cooked ROM already?
alexwai said:
after flash to the cooked ROM, the warranty will be voided ,right? u flash to the cooked ROM already?
Click to expand...
Click to collapse
There is a way to revert back to the original. If you don't try, you will never know which ROM is better, will you?
eaglesteve said:
There is a way to revert back to the original. If you don't try, you will never know which ROM is better, will you?
Click to expand...
Click to collapse
yes, i heard that some cooked do much better than the official ROM.
can u teach me or guide me how to flash and revert back to the original one?
i am new to pda, never try this before...
what skin is going to work on my p3600 :manila or tuchflow or 2d skins...?
danilo01 said:
what skin is going to work on my p3600 :manila or tuchflow or 2d skins...?
Click to expand...
Click to collapse
All three of these refer to the same thing.
First you need to learn how to flash a ROM (do a search).
Next, flash a custom Manila2d ROM
Next, download some themes (skins)
Next, use m2dc customizer to install the themes.
There are threads in xda which explain in great detail how to do all this, just use the search facility.
Good luck,
Mattster.
some examples
is there a different types of themes for different roms or the wm6.1 parameter for search is ok?
dont know how to be positiv that i am downloading the right thing
can p3600 stand tuchflou (rotating box meny)?
I AM REEDiNG AND HOPE ILL LEARN SOMETHING....THANKS FOR HEALPING
danilo01 said:
is there a different types of themes for different roms or the wm6.1 parameter for search is ok?
dont know how to be positiv that i am downloading the right thing
can p3600 stand tuchflou (rotating box meny)?
I AM REEDiNG AND HOPE ILL LEARN SOMETHING....THANKS FOR HEALPING
Click to expand...
Click to collapse
The 6.1 ROMs work fine on all Trinities. That is why they are in the Trinity section of the forum. Some download versions are specific for the p3600i. The first post of any ROM thread will indicate everything you need to know. Some have Manila2d (skinnable), some have FtouchFlo (finger gestures to scroll screen), some have both.
Mattster.
ok
ok thanks!
and for the last am I going to heve tis in new rom or need to download it?
and what intresting rom you are suggesting to me?
danilo01 said:
ok thanks!
and for the last am I going to heve tis in new rom or need to download it?
and what intresting rom you are suggesting to me?
Click to expand...
Click to collapse
Just read through the latest ROMS, see what they have, read the comments, then choose one you like.
Just make sure you follow the important steps on how to flash.
There is a useful step by step guide at this link. Follow it word for word in the order it says and you should be able to get it done. Remember to start at the beginning. If you have nothing important on your current device to back up, then you can start at STEP 2: "Upgrade to Hard SPL"
http://trinityguides.info/index.php?...d=25&Itemid=66
Best of luck,
Mattster.
p.s. Moderators do not approve of newcomers starting new threads on information that is already out there. If you have specific problems, look for an answer in the search button, or ask them here in in Trinity Upgrading:
http://forum.xda-developers.com/forumdisplay.php?f=312
Thanks allot
FROM NEXT WEEKK I AM GOING TO ACTION
till then I ma going to lear and reed as nutch as possible....thanks
Hi guy`s (and girls of course)
i do have a little qwestion about the new manila version calld sense is there a cab for this ?
i would apply this on my phone without reinstalling my phone (i got special software on my phone that i dont want to loose)
i hope you all could help me
greatings
antonius
p.s. yes is search the board yes i search google but dindt find an good awnser
p.s. sorry for the bad english
I don't think you can get a cab for it, no. To help you out, what you're after, I think, is Manila version 2.5 (2.1 was called TouchFlo 3D, now called "Sense" by HTC).
Have a look around and you'll see lots of ROMs with 2.5 cooked into them, you can try one of those but you'll need to flash the ROM (see the stickies for instructions).
steviewevie said:
I don't think you can get a cab for it, no. To help you out, what you're after, I think, is Manila version 2.5 (2.1 was called TouchFlo 3D, now called "Sense" by HTC).
Have a look around and you'll see lots of ROMs with 2.5 cooked into them, you can try one of those but you'll need to flash the ROM (see the stickies for instructions).
Click to expand...
Click to collapse
I have 2.1.1919something and it's called HTC Sense, just fyi. Might be he just wants that
Antonius123 said:
Hi guy`s (and girls of course)
i do have a little qwestion about the new manila version calld sense is there a cab for this ?
i would apply this on my phone without reinstalling my phone (i got special software on my phone that i dont want to loose)
i hope you all could help me
greatings
antonius
p.s. yes is search the board yes i search google but dindt find an good awnser
p.s. sorry for the bad english
Click to expand...
Click to collapse
Hi dont think theres a cab if so its not recommendet to use must be cookt in rom best thing to do is flash a custom rom whit 2.1 sense or 2.5
grtz weesje
weesje said:
Hi dont think theres a cab if so its not recommendet to use must be cookt in rom best thing to do is flash a custom rom whit 2.1 sense or 2.5
grtz weesje
Click to expand...
Click to collapse
I have Sense 2.1 with my stock WM 6.5 ROM from HTC.com...
mhurg said:
I have Sense 2.1 with my stock WM 6.5 ROM from HTC.com...
Click to expand...
Click to collapse
so what do mean then if you have 2.1 sense you whant the last manila build then you have to flash you can not install whit a cab
Do you guys ever think there will be a .cab for HTC Sense? I have read about flashing but i dont feel comfartable doing it because i don't want to brick my phone.
there is a custom manila called MAx manila i installed the cab and its full screen on my TP2.. very cool..
xero kaz said:
Do you guys ever think there will be a .cab for HTC Sense? I have read about flashing but i dont feel comfartable doing it because i don't want to brick my phone.
Click to expand...
Click to collapse
Probably not. Sense consists of hundreds (if not thousands) of files which also integrate quite deeply with Windows Mobile. I simply don't think it can be done.
However, you shouldn't at all be afraid of flashing cooked ROMs. I was once a n00b, terrified of breaking my Kaiser by flashing a cooked ROM. However, I read, followed directions, and didn't take shortcuts. As a result, I turned out fine. As long as you read and follow proper directions from people who know what they're doing, it's incredibly unlikely that anything bad will happen. Also, most "bricks" are not truly bricks, and are easily recoverable.
ok thats to bad :S i would realy love it.
you guys are also talking aboute files that are loose.
where can i find those files ?
greatings
xero kaz said:
Do you guys ever think there will be a .cab for HTC Sense? I have read about flashing but i dont feel comfartable doing it because i don't want to brick my phone.
Click to expand...
Click to collapse
There won't be a CAB, but why not just flash it with the official HTC ROM? Then you get Sense without doing anything that messes up the warranty. And you won't brick it.
weesje said:
so what do mean then if you have 2.1 sense you whant the last manila build then you have to flash you can not install whit a cab
Click to expand...
Click to collapse
I'm just saying you DON'T need a custom ROM for Sense.
Antonius123 said:
ok thats to bad :S i would realy love it.
you guys are also talking aboute files that are loose.
where can i find those files ?
greatings
Click to expand...
Click to collapse
I see you're from Holland, so here's the link to the Dutch HTC TP2 ROM with WM 6.5 and Sense (at least the Norwegian version of the same ROM had Sense).
http://www.htc.com/nl/supportdownloadlist.aspx?p_id=250&act=sd&cat=all
Just follow instructions and you'll be fine. Just back up your contacts etc first ;-)
hello
I have a new HD2 Leo 1024.
I tried to install android and windows phone 7 roms.... but the phone always suck and freeze with a black screen
now I install windows mobile 6.5 rom..... but I want android on this phone!!!
what to do?
click on those big red letters
Kameirus said:
click on those big red letters
Click to expand...
Click to collapse
so I already read what that you said to me to do.....
but it's not help to my HD2 T-Mobile problem
ebfegg said:
so I already read what that you said to me to do.....
but it's not help to my HD2 T-Mobile problem
Click to expand...
Click to collapse
search search search
your question has been asked many times
http://forum.xda-developers.com/showthread.php?t=1044830
Kameirus said:
search search search
your question has been asked many times
http://forum.xda-developers.com/showthread.php?t=1044830
Click to expand...
Click to collapse
maby can you to answer my question???
I am not find the answer on what that you sent to me....
Not sure if you're trolling or just that stupid. He provided a link to the best guide there is (IMO), what are you complaining about?
Nigeldg said:
Not sure if you're trolling or just that stupid. He provided a link to the best guide there is (IMO), what are you complaining about?
Click to expand...
Click to collapse
seems like he wants us to hand everything to him on a plate
and then flash it for him .....
Nigeldg said:
Not sure if you're trolling or just that stupid. He provided a link to the best guide there is (IMO), what are you complaining about?
Click to expand...
Click to collapse
I am not complain.
I just said that I tried this guide and other to install Android on my HD2 leo 1024 but from some reason- any rom that not windows mobile 6.5
stuck and I get blackscreen.... I don't know what to do
can you to help me please?
ebfegg said:
I am not complain.
I just said that I tried this guide and other to install Android on my HD2 leo 1024 but from some reason- any rom that not windows mobile 6.5
stuck and I get blackscreen.... I don't know what to do
can you to help me please?
Click to expand...
Click to collapse
what partition size are you using
If you are having problems flashing a ROM, try either a SD Rom or a NativeSD Rom. Neither require flashing. Just unzip the ROM to your SD card, and then run 2 programs from WM, and you have Android. If you get this working, then you can proceed to read more and get flashing working.
I highly recommend this ROM: https://sites.google.com/site/nexushd2android/nexushd2-gingerbread/v3-2/download
ebfegg said:
I am not complain.
I just said that I tried this guide and other to install Android on my HD2 leo 1024 but from some reason- any rom that not windows mobile 6.5
stuck and I get blackscreen.... I don't know what to do
can you to help me please?
Click to expand...
Click to collapse
It's impossible that you tried this guide AND others yet still unable to boot android. If that's really happening, it's either you have a faulty device or you're doing something wrong. And since we do not live with you and you're not providing enough information, we can't really help you.
What are we supposed to tell with "I tried this guide but my device gives black screen and stuck"?