Hope I'm allowed to do this. I've got a spare screen unit (black ribbon) off of my HERMES - it wasn't responding to stylus turned out to be bezel issue. If your interested get in touch.
Related
I have sadly broke my screen but it looks fine, it's just the touch not working. Im new at this and I have no clue what the difference is between the lcd and the digitizer. I need to know what to replace on this. please help.
screen and digitizer
the screen is the actual lcd display while the digitizer "touch" part of tthe screen. now i havent replaced the screen on my wing yet but most units the screen and digitzar are one complete unit sometimes the digitizer can be seperated with a razor blade (not recomended) personaly i would replace the entire unit (lcd and digitizer)
Hello all,
My Touch HD slipped from my hands and ended-up flat on the screen... the screen does not have a scratch, the digitizer still works perfect, but the LCD underneath is broken, so I get a black screen. I can still access the Touch HD via my PC thanks to MyMobilier, though (so why do I complain, huh?!!)!
I ordered a replacement LCD in Hong-Kong (thanks ebay!), got the HTC Service Guide, managed to remove the antenna cover (tough!) and dismantle the whole thing. But NOW I AM STUCK with the 'bezel', i.e. the cover, screen, digitizer, LCD, and metal plate with bolts all apparently glued together.
Anyone faced the same problem? Anyone knows how to separate the LCD from the screen and digitizer?
Cheers,
FroggyZ
Up
Anyone can help with this???
Hi,
The touch screen of my HTC elf doesn't work anymore.
I am going to order some parts to change the digitizer myself and also the casing to make it look a little newer.
Anyway, I'd like to understand how the touch functionality works exactly. Is it a pressure on the digitizer itself that make a "touch" or is it a pressure on the digitizer that press the screen and this action make a "touch" ?
When I power my disassemble Elf, a pressure on the screen itself doesn't do anything....
I'd like to know if I need to order a screen as well
Hi,
just replaced my own elf's digitizer a month ago... and the phone is like new.
To answer your question it's the digitizer that reads pressure and sends the data to the system (if you already disassembled it you should have noticed a flat cable that connects the digitizer to the board).
So if the screen on your elf is working you should solve the problem by replacing only the digitizer.
You rock, I order now
This is my first post here and though i read similar posts on this subject i would
like to read your opinions on this one.
I accidentally dropped some water on my touch hd and my display got damaged.The phone worked fine and so did the digitizer but the problem was that the backlight of the display was dead.At some point the backlight turned on but when i tried to input the unlock code it turned off right away (did this several times).I knew that i should replace the lcd (and the digitizer just in case).
I bought the lcd and the digitizer seperately and i managed to assemble the phone back using the service manual.Since then when i turn the phone on I hear the starting sound,i get the vibration then after a while the screen with no backlight again displays the "tap here to configure your phone" screen (after the hard reset),when i tap i get no response.
I checked the connections many times and i also used a second digitizer with no success.
Is there a possibility flashing a new ROM will solve the problem?
If so is there a way of flashing a ROM when the phone's screen is not usable?
Waiting for your precious opinions/suggestions/knowledge
Thanks in advance.
Hello,
Flashing the ROM won't solve an obviously hardware problem.
If you changed the LCD and still have no backlight, then either you bought a defective screen, or the problem is elsewhere, maybe on the main electronic board... Which would be bad news.
BTW, I wanted to change the digitizer in the apst years, but its not provided with the glue, so I had to buy a whole assembled screen + digitizer.
How did you manage to glue the digitizer on the screen ?
I aligned the screen with the digitizer and then i used small pieces of a special thin and trasparent tape to hold it in place.The tape holds the screen tight and it is barely visible, it also has the advantage that you can seperate the lcd and digitizer anytime you want with ease (though you have to be very delicate when applying it to get a good result)
I asked for a replacement of the defective lcd and i hope i will get a new one.
Hi
I've dropped my HD2. Everything is working, including touch screen, I can unlock the phone, I can answer the call, but screen is black, not broken.
What should I do? Does the lcd screen replacement will be sufficient? In that case, could the screen be ok, but some other display "processor" could be dead? I'm asking because I'll try to this on my own.
Could simply be the lcd cable has slipped slightly but probably more likely an LCD replacement needed.
You need remove rear housing & have a look & make a decision from your findings/testing.
hello
I've got a little update - lcd screen is working well - I mean it displays the image, the only malfunction is backlit. Right now when i use flashlign I can actually see whats on screen. Do you have experience or think that backlit connection can be repaired? Do You have any schematics for hd2' lcd ?
I suspect new LCD required by sounds of it. LCD can not be stripped for repair so after basic inspection of external connection replacement is only solution & not expensive due to falling cost of HD2 parts.