Related
Hi all,
I just got the X1 yesterday and im wondering how to open the battery cover. the cover seems so egg-like thin and im so afraid if i force it the wrong way, it would break. Kinda regret to let the salesman assemble the battery and sim card for me.
So anyone knows how to open it nice and easy?
there are 2 groves at the bottom of the cover, put your fingers(nails) and pull. weird system i know, thats what i thought when i first got it
Page 3 in the manual
http://www.sonyericsson.com/cws/support/phones/detailed/userguide/x1?cc=us&lc=en
just use force its all good, thats how I succeeded
LOL, funny that you think it's easier to ask in the forum instead of reading the manual.
Paitor said:
LOL, funny that you think it's easier to ask in the forum instead of reading the manual.
Click to expand...
Click to collapse
i did read the manual and i have tried it. but its still quite difficult to open with that instruction. how can the cover be lifted just like that? i asked myself.
now that i have realised you need to push with your fingernails, my fingernails r actually quite short. so i finally asked the forum if anyone got special tricks to open the back cover.
I turn the phone upside down and flip it over (so the camera end is towards me).
I put my index fingers on the end away from me (the end with the scrollpad).
Using my thumbnails, I slightly pull the away from the casing at the notches and push straight up.
I try not to put any strain on the plate as there are already weak spots in the casing and I don't want to contribute to them opening up in cracks.
I had this issue too. I thought the manual implied squeezing the sides and then pulling.
I finally found a youtube vid on how to disassemble the X1 and he used a guitar pick to get under the case and pull it up. Eventually got my nail under it...
mine sometimes fall off on it's own account if i have it in a pocket with enough room for it to move around a bit
dude, it's metal, not that easy to be broken, use your nail then, pull one side.
There is a huge thread regarding cracked cases with the X1.
I, myself am on my 5th one, all previous ones had cracked cases.
The cover is very strong but the surrounding case is very weak.
I would use extreme care when removing the lid.
Gently insert finger nail until the lid releases one side at a time.
I feel sure this could contribute to the cracks in some cases.
reconer said:
Hi all,
I just got the X1 yesterday and im wondering how to open the battery cover. the cover seems so egg-like thin and im so afraid if i force it the wrong way, it would break. Kinda regret to let the salesman assemble the battery and sim card for me.
So anyone knows how to open it nice and easy?
Click to expand...
Click to collapse
The battery cover is a pain in the ass, get a flat screw and ply it open. Seriously.
Anyone had problems with the battery cover? I took mine off when I first got it and when I tried to put it back, it only clipped into 3 corners, 1 was loose and slide on and off so was never flush.
I've sent it back to Mobilephonesdirect for them to "assess" and see if a replacement is needed. Bloody hope so, its faulty!
Nope, no problems here although i had to open & close the cover several times to reset the device.
Other than finding it the worst battery cover design ever made by HTC, no. I did notice that when putting it back on you put the right side in first and then snap it all down evenly, that it left one corner up and it simply needed a gentle push and it all went flush.
I am concerned about the long term use of the cover, it is difficult to get on and off at best and certainly not designed for ease of use.
The cover is metal but the phone it snaps onto is plastic....and the plastic contact points will wear, that's if the metal battery cover itself doesn't relax its shape a little and get less tight. It seems a bad solution to me but HTC aren't alone in this, I see that battery covers are becoming cheaper and nastier across all brands. At least the HTC cover is metal. I try not to remove my cover...ever.
Yeah, it's a little tight for my liking, if you swap out the sim or memory card a lot it could cause problems. Second battery too.
Hopefully the back case will be available to buy somewhere. It must cost pennies to make.
arfster said:
Hopefully the back case will be available to buy somewhere. It must cost pennies to make.
Click to expand...
Click to collapse
Yeah, but they'll probably be available on eBay for about £25, despite that.
I thought I was doing something wrong when I could not budge mine.
On a new phone it takes quite a bit of brute force.
battery cover
Yep, mine stays up on one corner too. Just a little nudge and its back on flush!
Technique is King
Everything requires a technique, then it becomes easy!.
Really all one needs to do is slide your thumbnail under the cover's edge; from one end to the other till there is a millimeter gap, then voila! simply pull off!
If you try to pull it off using the indented 'tab' then good luck to you, Frustration Guaranteed!
sunking101 said:
I try not to remove my cover...ever.
Click to expand...
Click to collapse
Unforyunately my phone already got stuck a couple of times and the only way to bring it to live again was removing the cover and soft reset or remove the battery.
A shame that the reset button is not reachable from the outside. It might be easy to make a small hole in the cover right above the reset button.
nicelad_uk said:
Anyone had problems with the battery cover? I took mine off when I first got it and when I tried to put it back, it only clipped into 3 corners, 1 was loose and slide on and off so was never flush.
I've sent it back to Mobilephonesdirect for them to "assess" and see if a replacement is needed. Bloody hope so, its faulty!
Click to expand...
Click to collapse
I had the same problem with the cover on mine. I found that I must have slightly bent the cover when i first removed it, when i bent it back (to make the fit a bit tighter) it never happend after that.
sunking101 said:
I try not to remove my cover...ever.
Click to expand...
Click to collapse
I will try not too. However if the phone locks up I'll have no choice but to remove the cover and press the red button.
ya i also think the battery cover is design in a wrong way
it took me awhite to open it...
u know i scare i open to hard will spoilt it
Some of the covers are a bit loose. Thank goodness the shop I bought it from, replaced mine for me.
I cracked my screen pretty badly this weekend and am planning on ordering the replacement parts this week (debating the just glass or the new glass/LCD options). But I've noticed since then(last 2 days) the battery has drained pretty fast. Normally I get 2 days from a charge, today I pulled the phone off the cord at 8am and now at 3pm I got a pop-up saying <10%. The phone has only sat on the desk. No calls, no emails, no text, no web surfing.
Maybe the screen is getting mixed signals, being cracked and all.
Any ideas?
mattlikesbikes said:
I cracked my screen pretty badly this weekend and am planning on ordering the replacement parts this week (debating the just glass or the new glass/LCD options). But I've noticed since then(last 2 days) the battery has drained pretty fast. Normally I get 2 days from a charge, today I pulled the phone off the cord at 8am and now at 3pm I got a pop-up saying <10%. The phone has only sat on the desk. No calls, no emails, no text, no web surfing.
Maybe the screen is getting mixed signals, being cracked and all.
Any ideas?
Click to expand...
Click to collapse
I am not really knowledgable about the exact interworkings of the HD2's internal hardware. But I do think it would be a pretty fair assumption that the cracked screen could be the cause of the sudden battery drain. You know your HD2 better than anybody else would as far as daily functionality of your HD2. So if it was not having a battery drain before you cracked the screen. And now you do after and this is the singular change in the state of the HD2 be it hardware wise or software wise. Then logic would say that is it.
Have you thought any about it might not just be the screen that is cracked. What about the internals. How hard did it hit, and how hard was the object the phone hit????
One last thing, be nice to your HD2, it is nice to you. ha ha ha....... But really take it easy on the hardware.
I trimmed the tape on it down to only covering the glass (finger protection mostly) and got it off the edges and out from around the back. This seemed to really help. I've noticed from the beginning of owning this phone that there are some sensitive spots on the sides that when pressure is applied the phone acts like a button was pressed etc. So I must have been causing this. Even with the screen off it was still reading a button push and having to process this action, using power.
I need to find a hard shell for the phone. The rubber thing that came with it is useless as it sticks in your pocket, I need smooth hard plastic I guess. The phone slipped out of my hand as I was getting out of the car and landed face down. Pure accident.
mattlikesbikes said:
I trimmed the tape on it down to only covering the glass (finger protection mostly) and got it off the edges and out from around the back. This seemed to really help. I've noticed from the beginning of owning this phone that there are some sensitive spots on the sides that when pressure is applied the phone acts like a button was pressed etc. So I must have been causing this. Even with the screen off it was still reading a button push and having to process this action, using power.
I need to find a hard shell for the phone. The rubber thing that came with it is useless as it sticks in your pocket, I need smooth hard plastic I guess. The phone slipped out of my hand as I was getting out of the car and landed face down. Pure accident.
Click to expand...
Click to collapse
I too have notice the same thing about my HD2 that ertain areas around the edge are sensative, like you said almost like you were pressing abutton of some sort. I am glad you figured something out that helps stop the battery drain. I know that can be agrevating as hell.
If you have a T-Mobile HD2 like I do you could try the Body Glove. I have one on mine, it is a two piece hard plastic cover you HD2 slides up in. ig has a pull out kickstand on the back also, I really like it. It has help protect my HD2 several times when I accidently dropped it out of my hand. I do warn you though after having it on your HD2 for awhile it will make to little scuff marks of the clear coat on your battery cover. Also I have notice I have to make sure I have a ferm grip on it when I pick it up cause the plastic cover is a little slick not like when gou have the rubber case on it. I attached two photos of the cover, oh and you can buy it from T-mobile store or from the T-Mobile website. I suggest website it is cheaper there.
Hi guys, I've owned an Xperia Play since July 2011, since then I've had some 'Battery Cover' issues. First, let's start off by talking about the battery cover itself, well actually there's not much to say. If you have an Xperia Play you already know the battery cover is very cheap, it's a large rectangular piece of plastic that covers the entire back on the phone, it's a pain to get it off and on at times. So not only it is cheaply made, it also has the tendency to start 'squeaking' or 'creaking' after a while. This simple issue can be fixed my ordering a new back piece to replace the old one, but note, if you swap batteries, swap SIM cards, swap SD cards, or anything that involves taking the battery cover off, it WILL, at some point in time, get worn out and slightly bent out of place. There's no escaping this problem due to it's design. In the past I've ordered about 3 Black battery cover replacements, and each one of them, after sometime, became creaky. Now maybe I'm just being picky but I REALLY hate picking up my phone and hearing that *squeaky* sound. It annoys the piss out of me. So I've came up with a way to prevent / fix this. What I'm about to guide you through is EXTREMELY simple and shouldn't cost you more than $2... ENJOY
SUPPLIES: Electrical Tape & Scissors
(1) Hold your phone to where the back is facing you, gently but firmly press all around until you've found your squeaky area. ( take a mental note of where this spot is )
(2) Remove the battery cover.
(3) Cut off a piece or two of electrical tape according to the size of the squeaky area, place the electrical tape on the inside of the battery cover where you took a mental note of.
(4) Put the battery cover back on! You're all done! No more squeaking!
It worked for me, it should definitely work for you! Try it out and post your results! Don't forget to *Thank* me!
(I've included a picture of what the results look like, lol I'm sure we all know what a piece of tape looks like on a piece of plastic but yeah here's one in case you don't!)
Thanks, no more squeaking!
I dont care about the squeaking that much, but still, u made my play better!
CyberScopes said:
Thanks, no more squeaking!
I dont care about the squeaking that much, but still, u made my play better!
Click to expand...
Click to collapse
Glad I could help! Sure beats spending $10-15 for a new back.
Yep. I used strong masking tape.
Sent From My Sony Xperia Play. Press the Thanks button for Fun.
I've replaced the battery lid a few times but I've never had the creaking problem. I wonder if it has something to do with the CDMA version not having the space for the SIM card.
Anyway, I do agree that they are poorly made. My first one developed cracks around the pry point and around the top even before I got a second battery. Obviously, battery swapping means I open it more often than most users, but I was EXTREMELY careful. Eventually I lost the corner next to the power button. On my replacement I made sure to never use the pry point without relieving pressure by pulling the corners too (usually unclipping them first). I also used a stick-on carbon-fiber protector from the day I installed it till the day I replaced it. It eventually formed a crack by the pry point too. Argh!
While it is fresh in my mind.
1) The seam for the back is not along the surface, it is along the edge. The silver part and the glass is where you want to attack. It is going to be hot, wear gloves.
2) Don't use metal tweezers around the battery connector as it is always hot. I accidentally shorted the old battery and was afraid I'd also hit the motherboard but apparently did not.
3) The battery is glued in SOLID even though it appears to be a tight spot. The thing is, there are flat cables underneath (see photo) and the screen so you have to be careful. I have read not to use heat on it but I think you almost have to use a little. There is the frame between the battery and the screen, but too much leverage could easily damage the screen. I did not glue my new battery down. We will see.
4) If the thing turned on (or you turned it on) without the fingerprint sensor connected, you will need a reboot to find the fingerprint sensor. At first, I thought I had not seated the cable but then it dawned on me to reboot before I took the cable bracket and cable back off. That fixed it.
I managed to chip the midframe a little in one spot. Not bad and invisible in the case. Not very noticeable without the case. In fact, I didn't glue the back down yet because my case holds it all together with no issues and I thought I'd take a day or two to make sure nothing is going to pop loose in there.
Thanks for the write up.
Did you end up reusing the old battery door adhesive or go with a new one?
Wasn't sure from your post.
Also how's the new battery holding up?
wd5gnr said:
While it is fresh in my mind.
1) The seam for the back is not along the surface, it is along the edge. The silver part and the glass is where you want to attack. It is going to be hot, wear gloves.
2) Don't use metal tweezers around the battery connector as it is always hot. I accidentally shorted the old battery and was afraid I'd also hit the motherboard but apparently did not.
3) The battery is glued in SOLID even though it appears to be a tight spot. The thing is, there are flat cables underneath (see photo) and the screen so you have to be careful. I have read not to use heat on it but I think you almost have to use a little. There is the frame between the battery and the screen, but too much leverage could easily damage the screen. I did not glue my new battery down. We will see.
4) If the thing turned on (or you turned it on) without the fingerprint sensor connected, you will need a reboot to find the fingerprint sensor. At first, I thought I had not seated the cable but then it dawned on me to reboot before I took the cable bracket and cable back off. That fixed it.
I managed to chip the midframe a little in one spot. Not bad and invisible in the case. Not very noticeable without the case. In fact, I didn't glue the back down yet because my case holds it all together with no issues and I thought I'd take a day or two to make sure nothing is going to pop loose in there.
Click to expand...
Click to collapse
tiguy99 said:
Thanks for the write up.
Did you end up reusing the old battery door adhesive or go with a new one?
Wasn't sure from your post.
Also how's the new battery holding up?
Click to expand...
Click to collapse
After about a week with it in the case, the old adhesive was stuck on good so I left it alone. The new battery is holding up well. Phone is no longer my daily driver, though, but the battery is great.
wd5gnr said:
After about a week with it in the case, the old adhesive was stuck on good so I left it alone. The new battery is holding up well. Phone is no longer my daily driver, though, but the battery is great.
Click to expand...
Click to collapse
Replaced my battery last night. End up reusing my old adhesive which worked out well. When it was still hot/soft, I took a flat head screwdriver and lightly drew the adhesive back flat on the surface as much as I could before beginning the full teardown.
That did the trick for me.
As for the battery itself, you're right... the battery is in there with some very strong adhesive. Had to actually use my heat gun to soften the adhesive and free it. For me, it wasn't coming out any other way and this part took the longest.
Didn't heat the battery directly as I didn't want to burn it so I heated the area from the screen side....be very careful as you do this as the screen can get burned as well. (Don't ask me how I know)
Overall the new battery is working very well and the phone feels like it did day 1 again. Can't wait to see the SOT time later this evening
Edit see attached...almost 5 hours again with 25% left with normal use and auto brightness on Nougat. Can easily see 6 hours at this rate! Very impressed
Damn this looks more complicated then changing it on an iPhone
xsacter said:
Damn this looks more complicated then changing it on an iPhone
Click to expand...
Click to collapse
YMMV but personally I can vouch that its one of the more time consuming and challenging repairs vs usual iPhone jobs. They use some type of space age adhesive that quite difficult to remove. Most of the repair is trying to gently remove the back glass, battery and screen. If you can quickly get those out without damaging the components, the rest of the repair is simple.
Are there replacement backs? My battery lasts maybe an hour of SoT at this point. I've tried factory resetting it. I'm tempted to get a new phone (because I'd like security updates), but the H8 is still fast enough to use. Mostly not knowing what I'm doing I figure breaking the back is fairly likely.