Related
It is just me or does the battery cover really not clip on very well at all?
Mine is constantly falling off and is not easy to clip back on solidly
Yeah i heard of this problem. The guy in the shop where i bought my phone told me that this is a problem of the first build devices of the X1. i was lucky, because i got one of the "secound generation".
maybe you are able to change it?
Sweet, if its not happening for everyone I will demand a replacement
how can you see which generation device you have ?
Kr
i don't know where you can see this exactly. If you'r battery cover fits on you'r phone everything seems alright.
mine is letting loose of it's clips too on one side of the X1. It's really annoying cauze I have to push it back into the right position every time. But it's not falling off or so. It's just not tight on the phone.
I had this problem, but it's easily fixed... if you take the cover off the back and find the two metal prongs which would touch the cover when placed over it (the sony ericsson symbol side). simply press them down slightly. i think they're there for a reason so make sure they still touch the cover. hope this helps.
Joel
blink182_joel said:
I had this problem, but it's easily fixed... if you take the cover off the back and find the two metal prongs which would touch the cover when placed over it (the sony ericsson symbol side). simply press them down slightly. i think they're there for a reason so make sure they still touch the cover. hope this helps.
Joel
Click to expand...
Click to collapse
Same here. I just took the back panel off and gave it a first squeeze, now fits pretty well.
Wish I had thought to do you method though, would have been neater as the back does bulge a little now but doesn't fall off anymore. Sadly I hadn't spotted that the clips were addons rather than moulded into the metal.
I must say that I'm not too confident about the batterycover at this moment. It still hangs on, but not too well. On my X1 it tends to jump off automaticly when I put the cover on, luckily it hasn't happened yet though. Seems there's some tension pushing the cover out.
had the same problem. i fixed it by expanding the little two bumps on the site, which hold the cover with a knife.
Hi all,
I just got the X1 yesterday and im wondering how to open the battery cover. the cover seems so egg-like thin and im so afraid if i force it the wrong way, it would break. Kinda regret to let the salesman assemble the battery and sim card for me.
So anyone knows how to open it nice and easy?
there are 2 groves at the bottom of the cover, put your fingers(nails) and pull. weird system i know, thats what i thought when i first got it
Page 3 in the manual
http://www.sonyericsson.com/cws/support/phones/detailed/userguide/x1?cc=us&lc=en
just use force its all good, thats how I succeeded
LOL, funny that you think it's easier to ask in the forum instead of reading the manual.
Paitor said:
LOL, funny that you think it's easier to ask in the forum instead of reading the manual.
Click to expand...
Click to collapse
i did read the manual and i have tried it. but its still quite difficult to open with that instruction. how can the cover be lifted just like that? i asked myself.
now that i have realised you need to push with your fingernails, my fingernails r actually quite short. so i finally asked the forum if anyone got special tricks to open the back cover.
I turn the phone upside down and flip it over (so the camera end is towards me).
I put my index fingers on the end away from me (the end with the scrollpad).
Using my thumbnails, I slightly pull the away from the casing at the notches and push straight up.
I try not to put any strain on the plate as there are already weak spots in the casing and I don't want to contribute to them opening up in cracks.
I had this issue too. I thought the manual implied squeezing the sides and then pulling.
I finally found a youtube vid on how to disassemble the X1 and he used a guitar pick to get under the case and pull it up. Eventually got my nail under it...
mine sometimes fall off on it's own account if i have it in a pocket with enough room for it to move around a bit
dude, it's metal, not that easy to be broken, use your nail then, pull one side.
There is a huge thread regarding cracked cases with the X1.
I, myself am on my 5th one, all previous ones had cracked cases.
The cover is very strong but the surrounding case is very weak.
I would use extreme care when removing the lid.
Gently insert finger nail until the lid releases one side at a time.
I feel sure this could contribute to the cracks in some cases.
reconer said:
Hi all,
I just got the X1 yesterday and im wondering how to open the battery cover. the cover seems so egg-like thin and im so afraid if i force it the wrong way, it would break. Kinda regret to let the salesman assemble the battery and sim card for me.
So anyone knows how to open it nice and easy?
Click to expand...
Click to collapse
The battery cover is a pain in the ass, get a flat screw and ply it open. Seriously.
Anyone had problems with the battery cover? I took mine off when I first got it and when I tried to put it back, it only clipped into 3 corners, 1 was loose and slide on and off so was never flush.
I've sent it back to Mobilephonesdirect for them to "assess" and see if a replacement is needed. Bloody hope so, its faulty!
Nope, no problems here although i had to open & close the cover several times to reset the device.
Other than finding it the worst battery cover design ever made by HTC, no. I did notice that when putting it back on you put the right side in first and then snap it all down evenly, that it left one corner up and it simply needed a gentle push and it all went flush.
I am concerned about the long term use of the cover, it is difficult to get on and off at best and certainly not designed for ease of use.
The cover is metal but the phone it snaps onto is plastic....and the plastic contact points will wear, that's if the metal battery cover itself doesn't relax its shape a little and get less tight. It seems a bad solution to me but HTC aren't alone in this, I see that battery covers are becoming cheaper and nastier across all brands. At least the HTC cover is metal. I try not to remove my cover...ever.
Yeah, it's a little tight for my liking, if you swap out the sim or memory card a lot it could cause problems. Second battery too.
Hopefully the back case will be available to buy somewhere. It must cost pennies to make.
arfster said:
Hopefully the back case will be available to buy somewhere. It must cost pennies to make.
Click to expand...
Click to collapse
Yeah, but they'll probably be available on eBay for about £25, despite that.
I thought I was doing something wrong when I could not budge mine.
On a new phone it takes quite a bit of brute force.
battery cover
Yep, mine stays up on one corner too. Just a little nudge and its back on flush!
Technique is King
Everything requires a technique, then it becomes easy!.
Really all one needs to do is slide your thumbnail under the cover's edge; from one end to the other till there is a millimeter gap, then voila! simply pull off!
If you try to pull it off using the indented 'tab' then good luck to you, Frustration Guaranteed!
sunking101 said:
I try not to remove my cover...ever.
Click to expand...
Click to collapse
Unforyunately my phone already got stuck a couple of times and the only way to bring it to live again was removing the cover and soft reset or remove the battery.
A shame that the reset button is not reachable from the outside. It might be easy to make a small hole in the cover right above the reset button.
nicelad_uk said:
Anyone had problems with the battery cover? I took mine off when I first got it and when I tried to put it back, it only clipped into 3 corners, 1 was loose and slide on and off so was never flush.
I've sent it back to Mobilephonesdirect for them to "assess" and see if a replacement is needed. Bloody hope so, its faulty!
Click to expand...
Click to collapse
I had the same problem with the cover on mine. I found that I must have slightly bent the cover when i first removed it, when i bent it back (to make the fit a bit tighter) it never happend after that.
sunking101 said:
I try not to remove my cover...ever.
Click to expand...
Click to collapse
I will try not too. However if the phone locks up I'll have no choice but to remove the cover and press the red button.
ya i also think the battery cover is design in a wrong way
it took me awhite to open it...
u know i scare i open to hard will spoilt it
Some of the covers are a bit loose. Thank goodness the shop I bought it from, replaced mine for me.
Hi All
I spent the last 2 days trying to find a simple solution to this problem. Even though my phone is still under manufacturers warranty and Service Providers warranty I decided to just do this as working carefully there will be no indication that the phone has been opened or the "fix" has been applied
I for one couldn't take my phone to a service centre as they would have booked in my phone and gave me some Nokia 3100 knock-off budget phone for one and the repair would have taken 21 days and having business requirements that my phone needs to meet I decided to just do it myself.
So I decided to open it up myself and fix it and here is the guide on how to permanently fix the echo that people get when phoning you.
Problem:
When you receive or make a call people on the other end of the line hear a echo of themselves and this might be intermittent but seem to be worse when having any type of cover on the phone.
Reason:
The reason this occurs is because the speaker depicted in the 3rd photo labelled as "B" has a rubber seal at the bottom of it that has gone loose from the casing by either a drop or some vibration that is making the speaker's sound go into the phone and picked up by the NC (Noise cancellation) microphone shown in the same photo as "A" rather than be isolated and out the speaker hole on the front of the phone.
Fix:
This fix is fairly simple and permanent. You only need a 5mm x 12mm piece of cardboard or think paper that is around 0.5mm thick that can be used as a buffer.
Procedure:
Step 1:
Picture 1 Shows the phone screws that should be removed 1st depicted by round red circles. Keep the screws in the same order as you remove them as only 4 of the 7 screws have locktite on them and be sure when you replace them you put them back in the same position.
Step 2:
Picture 1 As depicted from 1 to 6 is the easiest way to follow to unclip your back and front cover from one another to not break any of the clips. The back cover is very rugged so don't be afraid to unclip it as it is unlikely to break.
See Below Picture no1
Step 3:
Picture 2 is how it should look like when the back cover has been removed. We will only be focused on the area in the red block called ZZ
See Below Picture no2
Step 4:
Picture 3 shows the 2 components that's interfering with one another. "A" is the NC microphone sensor. Be sure to check that the sensor is properly inserted into the rubber sleeve covering it. "B" is the speaker and is glued with some ridiculously little amount of glue into the housing of "B" and can be lifted with a tweezers or some small object to be able to lift it out of the housing in "B"
See Below Picture no3
Step 5:
Picture 4 Loosen the speaker by just moving it in this aspect north and south a bit until it can be lifted up. Please note the arrow as it flips the way the arrow is pointing to expose the casing it is housed in. Clean out the housing of any dirt and wipe the speaker off as well of any dirt or substance that might elevate the speaker a little bit in its housing.
Step 6:
Picture 4 Flip the speaker back into its housing and firmly press it down so that it seats itself well in the housing. The rubber that the speaker is surrounded with should press firmly in the housing to seal it of any noise coming into the phone.
See Below Picture no4
Step 7:
This is where you use the piece of cardboard or thick paper of 5mm x 12mm by 0.5mm thick and place it over the speaker. I recommend cutting up a business card as they are the correct thickness. When looking at Picture 4 the cardboard should be covering the whole red block as depicted by "C" and should look like Picture 5 when placed
See Below Picture no5
Step 8:
Close up the phone and screw everything back together. The piece of cardboard or thick paper will ensure that the casing press the speaker tightly in place and keep it there without letting it leak into the phone to cause the echo effect for people calling you.
Step 9:
Enjoy calls without any echo effect.
This is all very simple to do and my echo has gone away completely. The replacement part they are referencing to in other topics is not really the problem and has nothing to do with it. In the process of replacing that part the speaker gets loosened and removed out of the housing and upon putting the phone back together they securely glue the speaker back in place and thats why they get the same results.
If this guide helped please post and say so. The problem has no relation to software or anything other than the speaker leaking sound into the phone being picked up by the NC.
Hope this helps. My phone is working 100% without any issues.
nice find!!! Ill wait for some more feedback untill i test this myself
So its samsung's fault that we have problems!
I tested 3 different brand new phones and all had the issue. Does this mean that Samsung fails to correctly assemble all of it's phones?!
manmad said:
nice find!!! Ill wait for some more feedback untill i test this myself
So its samsung's fault that we have problems!
Click to expand...
Click to collapse
Ye to some extent. They should have used more glue to be honest but then it would have made it impossible to replace the part if it should break.
I fixed mine this morning this way that's why I made this post because I couldn't find anything to really help me to get this resolved and this is definitely the fix for it.
EQUANT said:
I tested 3 different brand new phones and all had the issue. Does this mean that Samsung fails to correctly assemble all of it's phones?!
Click to expand...
Click to collapse
Think about it this way. Anything comes loose with vibration. Maybe the delivery company man handled the boxes a bit on delivery or the vibration on the phone itself while being shipped could have loosened it as well.
Remember the Speaker needs to be completely sealed off from the internals of the phone and that's why you need the buffer so that the casing can keep it firmly pressed in place and sealed off from the internals.
Been on the phone a lot today and every person I ask tells me there is absolutely no echo.
And that coming from a 100% guaranteed echo for the last month
so, anyone else tested this?
manmad said:
so, anyone else tested this?
Click to expand...
Click to collapse
I would seem that ppl will probably do it and then not come back to post it worked because my "Thank You" count went up yet no replies
If your phone does this why not just do it? You have nothing to lose
Fixeeeed!!
OMG! It really worked thank you
I have tried this and it still seems hit and miss.
The case i use is a CaseMate Tough, it still echoes with this case fitted. If I use my other case a CaseMate Slim, it still echoes to a degree but not as bad.
Definatley no echo with no case though.
On a side note and not a whinge, probably worth mentioning in your guide which way the buttons go around when they fall out when you take the back off
hi toxic dust Thanks for your guide,i didn't apply the fix yet...i'm italian so it's alittle bit difficult for me to follow and understand every step.
Is it ok to use insulating tape (like black tape)??
And did i understand properly ...you have to cover with the tape the whole "C" area highlighted in red?
Thank you very much
Thanks, will try it.
You sir, are a genius!
I don't have the echo problem (even with my Otterbox) but I will definitely keep this thread in mind if something comes up.
Thanks.
gasss12 said:
hi toxic dust Thanks for your guide,i didn't apply the fix yet...i'm italian so it's alittle bit difficult for me to follow and understand every step.
Is it ok to use insulating tape (like black tape)??
And did i understand properly ...you have to cover with the tape the whole "C" area highlighted in red?
Thank you very much
Click to expand...
Click to collapse
I prefer not to use anything with glue on it. You could probably use insulating tape (black tape) but you have to remember there are heat distribution on the inside of your phone and it might stick now but with heat applied any glue a specially on tape like that becomes soft and might short your phone as glue becomes conductive when in a liquid form.
Thick paper wont conduct at all and heat has no effect on it hence the preferance to a solid piece of thick paper or cardboard.
I used a Business card and cut that to the size I needed. I'm sure you could find a Business card of some sorts lying around
Yes. You have cover the complete section marked as "C". You will see that the marked section is the complete speaker. Just make sure that the paper is properly sized and is on it directly because you need it to securely press the speaker in place.
Definatley no echo with no case though.
On a side note and not a whinge, probably worth mentioning in your guide which way the buttons go around when they fall out when you take the back off
Click to expand...
Click to collapse
Mine was echoing without a case so for me its a 100% fix
The buttons can actually go in any way round. It will just make your button a bit more stiff to press. If you want the button smooth it has little hinges. Those hinges have a little dent in them on the 1 side. Ensure that those dents show to the screen side.
Mine alsof does it without a case. I think I'm going to try it in a few days!
Sent from my GT-I9100 using xda premium
Thx toxicdust. Your solution worked perfectly!!!
I had this echo problem since I started using the Samsung Galaxy S2 with a Melkco case and was frustrated about it. Then I decided to buy a larger accupack (Samsung 2000 mAh type EB-K1A2E). This came with a separate backcover so I needed another case. The new flipcase (Samsung EF-C1A2B) is compatible with this larger accu. I hoped with this new (Samsung!) case the echo would have disappeared, but no, it was not! After reading about this echo problem in a different forums I stumbled on your solution. This was the first one that was likely to be a good solution and not some quirky workaround. So I started following your instructions and can now say the echo is completely gone! Wow man, thank you for this. Some extra details: It was easy to take the 7 screws out, but a little uncomfortable to open the back after that. Most easy is to simply use your fingernail in between the front and back of the housing on the side and go around. In my case the speaker seemed not as loose as in your case, so I didn't bother to try further to take it out. Only thing I did was checking the fixing of the two mics (seemed okay), pushed the speaker unit carefully in its housing (but did not seem to move though) and put a small piece of a business card on the speaker as you indicated. See the white piece in the picture below. I think I made it al little bit bigger then your 12 x 5 mm. The acoustical feedback loop has broken this way, so it is a perfect solution which only takes 10 minutes to do.
I am convinced. I will try it tomorrow
Sent from my GT-I9100 using xda premium
dutchiek said:
Thx toxicdust. Your solution worked perfectly!!!
I had this echo problem since I started using the Samsung Galaxy S2 with a Melkco case and was frustrated about it. Then I decided to buy a larger accupack (Samsung 2000 mAh type EB-K1A2E). This came with a separate backcover so I needed another case. The new flipcase (Samsung EF-C1A2B) is compatible with this larger accu. I hoped with this new (Samsung!) case the echo would have disappeared, but no, it was not! After reading about this echo problem in a different forums I stumbled on your solution. This was the first one that was likely to be a good solution and not some quirky workaround. So I started following your instructions and can now say the echo is completely gone! Wow man, thank you for this. Some extra details: It was easy to take the 7 screws out, but a little uncomfortable to open the back after that. Most easy is to simply use your fingernail in between the front and back of the housing on the side and go around. In my case the speaker seemed not as loose as in your case, so I didn't bother to try further to take it out. Only thing I did was checking the fixing of the two mics (seemed okay), pushed the speaker unit carefully in its housing (but did not seem to move though) and put a small piece of a business card on the speaker as you indicated. See the white piece in the picture below. I think I made it al little bit bigger then your 12 x 5 mm. The acoustical feedback loop has broken this way, so it is a perfect solution which only takes 10 minutes to do.
Click to expand...
Click to collapse
Ye I had the same thing. No matter where I googled there was absolutely no solution and decided to trouble shoot myself as I wont be waiting 21 days to get my phone back with "No fault Found" response from them in any ways. I also have the extended battery and that made me also use they Silicone case that makes it even worse
After seeing how rugged the SGS2 is in the drop test on SmartphoneEnvy.com I decided to not use a case anymore as a 5 foot drop directly on the screen barely scratched the casing and the screen got no damage at all.
I am glad the solution actually works for more people and thank you for the picture. If you don't mind I will put it in my guide at the top for better illustration
It worked! Thanks alot. Let's hope it stays fixed
Sent from my GT-I9100 using xda premium
Please read my post I have made the step by step instruction
Here the link below:
http://forum.xda-developers.com/showpost.php?p=21795243&postcount=62
Cool. Even though you used rubber its cool. At least it fix the problem
Regardless of what is used it needs to be about 0.5mm think. Also remember that you might have had something underneath the speaker keeping it lifted regardless of the amount of pressure you put on it that's why its recommended to clean the speaker and the housing
Hi All
Picked up a Nexus 4 a few days ago and only just noticed (as result of a call) that the proximity sensor is reporting that its "blocked" at all times, so the phone things its against my head. I can workaround this by using the "Power button to hang Up" option but at present cannot access any in call features.
When I look under good light the sensor, there are 2 areas so not sure which is the sensor, I can see what looks like a bubble under both. if you imagine what an air pocket looks like under a screen protector thats what it looks like but its behind the glass, perfectly centred. I guess its possible that something has broken here as a result of the drop, the top left corner was the point of impact, does that seem likely?
I got the phone cheap as it had a broke screen so have a new one coming. Its the full screen, glass and digitizer. Does anyone know of the sensor is part of the screen or does it sit behind and then I could be really screwed!
Ta
bert682 said:
Hi All
Picked up a Nexus 4 a few days ago and only just noticed (as result of a call) that the proximity sensor is reporting that its "blocked" at all times, so the phone things its against my head. I can workaround this by using the "Power button to hang Up" option but at present cannot access any in call features.
When I look under good light the sensor, there are 2 areas so not sure which is the sensor, I can see what looks like a bubble under both. if you imagine what an air pocket looks like under a screen protector thats what it looks like but its behind the glass, perfectly centred. I guess its possible that something has broken here as a result of the drop, the top left corner was the point of impact, does that seem likely?
I got the phone cheap as it had a broke screen so have a new one coming. Its the full screen, glass and digitizer. Does anyone know of the sensor is part of the screen or does it sit behind and then I could be really screwed!
Ta
Click to expand...
Click to collapse
Ok so I did a little more reading and it seems that a gorilla has changed the screen on this phone in the past and he / she has used compound to stick the screen down and some of it has gone around the sensor and the resulting press down on the screen has created a few air pockets.
Looking less forward to changing the screen now as no doubt with my luck the "technician" will have used some crazy heat resistant glue!
Also....missing the speaker grille....funny how you only notice things after you have bought them!
Search for proximity sensor fix after screen replacement here on xda. I've found out that if you switch sides of the little rubber /plastic cover that covers the proximity sensor, your problem will be solved. And the light sensor will work with no problems as well.
Sent from my Nexus 4 using Tapatalk
Sp_Ark said:
Search for proximity sensor fix after screen replacement here on xda. I've found out that if you switch sides of the little rubber /plastic cover that covers the proximity sensor, your problem will be solved. And the light sensor will work with no problems as well.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Really?
From reading the thing to do is either make the height of the bushing a little larger, height wise. Or, to increase the diameter of the holes.
I like your fix the best though....no messing about, just rotate.
Will give it a go, thanks!
It will work for sure, I posted this fix on a YouTube screen replacement guide of octopus glues I think and its confirmed to work from a lot of people. Then if you use a custom rom go to brightness settings while having auto brightness enabled and try changing light sources from dark to very bright places to see the instant lux values you get. If you are not satisfied with the result try custom auto brightness values.
Sent from my Nexus 4 using Tapatalk
bert682 said:
Really?
From reading the thing to do is either make the height of the bushing a little larger, height wise. Or, to increase the diameter of the holes.
I like your fix the best though....no messing about, just rotate.
Will give it a go, thanks!
Click to expand...
Click to collapse
Yep, I discovered this "fix" in a random youtube comment (was that you @Sp_Ark?) just a few days ago, and it worked for me. Then I found a thread here that confirmed that this could be a solution (which could have saved me a week of frustration).
If there's actually something on the proximity sensor, then you might be screwed. Well, not really, or $10 from China. The module is a snap-in piece with connector ribbon that also has the headphone jack. The prox sensor is the smaller one on the right side (when looking at the screen).
Disassembly of the Nexus 4 is pretty simple compared to many other smartphones. You'll need a T5 TORX wrench/bit for the screws at the bottom, and a very small Phillips driver for all the screws in the inside. You'll also need a tool to split the 2 halves apart (your screen replacement might have come with tools). You can find a couple videos on youtube, as well as a detailed teardown (pics) at ifixit.com. If you have a hairdryer (or an actual heat gun) you can make the process easier by softening the glue with heat, but it's not absolutely necessary. Just go slowly and be careful when prying the halves apart so you don't flex it too much and break the glass back.
Which screen assembly did you get? You can get it where it's just the LCD and the digitizer, and you can also get it that has the bezel and speaker with it. When I replaced the screen on my N4, I got the whole deal with the bezel and speaker, since it meant less work and fewer things to screw up.
Planterz said:
Yep, I discovered this "fix" in a random youtube comment (was that you @Sp_Ark?) just a few days ago, and it worked for me. Then I found a thread here that confirmed that this could be a solution (which could have saved me a week of frustration).
If there's actually something on the proximity sensor, then you might be screwed. Well, not really, or $10 from China. The module is a snap-in piece with connector ribbon that also has the headphone jack. The prox sensor is the smaller one on the right side (when looking at the screen).
Disassembly of the Nexus 4 is pretty simple compared to many other smartphones. You'll need a T5 TORX wrench/bit for the screws at the bottom, and a very small Phillips driver for all the screws in the inside. You'll also need a tool to split the 2 halves apart (your screen replacement might have come with tools). You can find a couple videos on youtube, as well as a detailed teardown (pics) at ifixit.com. If you have a hairdryer (or an actual heat gun) you can make the process easier by softening the glue with heat, but it's not absolutely necessary. Just go slowly and be careful when prying the halves apart so you don't flex it too much and break the glass back.
Which screen assembly did you get? You can get it where it's just the LCD and the digitizer, and you can also get it that has the bezel and speaker with it. When I replaced the screen on my N4, I got the whole deal with the bezel and speaker, since it meant less work and fewer things to screw up.
Click to expand...
Click to collapse
I got a "kit" off eBay, [URL="http://www.ebay.co.uk/itm/181144377215?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT"]http://www.ebay.co.uk/itm/181144377215?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT so it appears to be the complete screen. Ive watched a few videos but from the pictures it looks like the screen comes with the metal backing so I suspect I dont need to remove the old screen from the casing, thoughts?
Im expecting this to be the screen, bezel, and metal backing so I need to do is connect in my motherboard and all the other components.
Am I off in thinking this?
That's the full part. The one you've posted is the type I usually go for, they're good quality so far.
bert682 said:
I got a "kit" off eBay, http://www.ebay.co.uk/itm/181144377215?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT so it appears to be the complete screen. Ive watched a few videos but from the pictures it looks like the screen comes with the metal backing so I suspect I dont need to remove the old screen from the casing, thoughts?
Im expecting this to be the screen, bezel, and metal backing so I need to do is connect in my motherboard and all the other components.
Am I off in thinking this?
Click to expand...
Click to collapse
You made a wise choice, young padawan.
Yeah, that looks to be the entire front assembly, including the screen+digitizer, already installed in the bezel. Also includes the earpiece plus the speaker grill that you're missing. You'll have to swap over the guts, and that's about it. It's easiest to swap the power and volume rocker buttons first since it's a bit harder to get them where they go if you've got the logic board in the way. Just remember that the contact points need to make a ^ rather than a v when you're assembling it with the screen facing down. Tweezers are good to have, especially if they're very long and even better if they're curved. I also recommend doing this over a clean towel to avoid scratching the screen (there'll probably be a film over it too), and the fluffier the towel the better, to catch the tiny screws from flying and disappearing.
Honestly, getting the 2 halves apart is probably the hardest part. They make specialized tools for this, and often the sellers will include them, but it doesn't look like your purchase includes them (mine didn't either). Something plastic is the best choice, since you're less likely to cause cosmetic damage to the plastic (especially the bezel) if you slip (and you will slip). As I said before, GO SLOWLY. Work it apart a little bit at a time, alternate side to side, starting from the bottom. Eventually you'll be able to pull the 2 halves apart.
The battery will be stuck in pretty good and will need to be pried out. If I were you (and a week or so ago, I was you), I'd pop a new battery in while you're at it. At this point in the phone's life, it's probably had at least a few hundred cycles on the battery and has lost 10-20% of its original capacity. The other components shouldn't be nearly as hard to get out. Just pry in various points until the piece pops out. Do not force anything. Just work it out slowly. After you pop off the piece that covers the USB port, there's the board that has the port, and that can be slightly tricky to get out. Best way I found is to slip something small and flat (screwdriver?) into the port and push up and out, and the board should come out easily.
Thankfully, there's only 3 different screws used, and they're all easily differentiated from each other. There's the 2 T5 TORX that hold the halves together, the 2 very short screws with wide heads that hold the battery in place, and the rest that hold everything else are all identical to each other.
It looks like on your assembly, it comes with its own adhesives. Everywhere there's a blue film, pull it off and there'll be adhesive underneath. I'd recommend leaving the film on over the part where the sensor/headphone jack module goes until you're sure you can stick it in place with the proximity sensor not acting wonky. Download an app (I used Phone Tester) that can read the prox sensor. FYI, as long as everything is in place, and you've attached the battery, you can boot the phone without replacing the back cover, and test the sensor (just depress the center bit of the power button board). You don't need to screw everything in, but you should at least screw and tighten down the few that surround the sensor area. Once you've got it reading properly (best of luck), it's time to put all back together.
You should familiarize yourself with the teardown/reassembly guides out there. Go to ifixit.com and have everything ready to look at. This is the video that I used to guide me, and I watched it through a few times before I attempted it myself. You should be just fine with your phone after familiarizing yourself, but if you have any specific problems or questions, feel free to ask, and I'm all too happy to help.
Planterz said:
You made a wise choice, young padawan.
Yeah, that looks to be the entire front assembly, including the screen+digitizer, already installed in the bezel. Also includes the earpiece plus the speaker grill that you're missing. You'll have to swap over the guts, and that's about it. It's easiest to swap the power and volume rocker buttons first since it's a bit harder to get them where they go if you've got the logic board in the way. Just remember that the contact points need to make a ^ rather than a v when you're assembling it with the screen facing down. Tweezers are good to have, especially if they're very long and even better if they're curved. I also recommend doing this over a clean towel to avoid scratching the screen (there'll probably be a film over it too), and the fluffier the towel the better, to catch the tiny screws from flying and disappearing.
Honestly, getting the 2 halves apart is probably the hardest part. They make specialized tools for this, and often the sellers will include them, but it doesn't look like your purchase includes them (mine didn't either). Something plastic is the best choice, since you're less likely to cause cosmetic damage to the plastic (especially the bezel) if you slip (and you will slip). As I said before, GO SLOWLY. Work it apart a little bit at a time, alternate side to side, starting from the bottom. Eventually you'll be able to pull the 2 halves apart.
The battery will be stuck in pretty good and will need to be pried out. If I were you (and a week or so ago, I was you, I'd pop a new battery in while you're at it. At this point in the phone's life, it's probably had at least a few hundred cycles on the battery and has lost 10-20% of its original capacity. The other comments shouldn't be nearly as hard to get out. Just pry in various points until the piece pops out. Do not force anything. Just work it out slowly. After you pop off the piece that covers the USB port, there's the board that has the port, and that can be slightly tricky to get out. Best way I found is to slip something small and flat (screwdriver?) into the port and push up and out, and the board should come out easily.
Thankfully, there's only 3 different screws used, and they're all easily differentiated from each other. There's the 2 T5 TORX that hold the halves together, the 2 very short screws with wide heads that hold the battery in place, and the rest that hold everything else are all identical to each other.
It looks like on your assembly, it comes with its own adhesives. Everywhere there's a blue film, pull it off and there'll be adhesive underneath. I'd recommend leaving the film on over the part where the sensor/headphone jack module goes until you're sure you can stick it in place with the proximity sensor not acting wonky. Download an app (I used Phone Tester) that can read the prox sensor. FYI, as long as everything is in place, and you've attached the battery, you can boot the phone without replacing the back cover, and test the sensor (just depress the center bit of the power button board). You don't need to screw everything in, but you should at least screw and tighten down the few that surround the sensor area. Once you've got it reading properly (best of luck), it's time to put all back together.
You should familiarize yourself with the teardown/reassembly guides out there. Go to ifixit.com and have everything ready to look at. This is the video[/i] that I used to guide me, and I watched it through a few times before I attempted it myself. You should be just fine with your phone after familiarizing yourself, but if you have any specific problems or questions, feel free to ask, and I'm all too happy to help.
Click to expand...
Click to collapse
Awesome, I saw some cheaper screens but that one notes that its LG compliant etc. I bought a set of tools separately so will have all the stuff needed. Didnt think about the battery, will order one as it does make sense!
Thanks for the info, will update as I go.
If you want to have a working battery like it used to be before removing it, you have to be very patient and extra careful while trying to remove it. Use some heat for the glue and try with something very thin like a nylon guitar pick. In anyway don't bent the battery and don't start from top. It will be easier to first remove the mother board. Iv already destroyed 4 5 batteries while trying to remove them. Sorry for my English, I hope you understand.
Sent from my Nexus 4 using Tapatalk
Sp_Ark said:
If you want to have a working battery like it used to be before removing it, you have to be very patient and extra careful while trying to remove it. Use some heat for the glue and try with something very thin like a nylon guitar pick. In anyway don't bent the battery and don't start from top. It will be easier to first remove the mother board. Iv already destroyed 4 5 batteries while trying to remove them. Sorry for my English, I hope you understand.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Yea was extra careful, used a little heat. Someone has definately replaced the screen on the phone before but seems to have been careful enough as no screws missing etc, except the lost the little speaker grille
New screen in and working well. The proximity sensor seems to be working but it reports all or nothing rather than varied. Is this correct?
bert682 said:
Yea was extra careful, used a little heat. Someone has definately replaced the screen on the phone before but seems to have been careful enough as no screws missing etc, except the lost the little speaker grille
New screen in and working well. The proximity sensor seems to be working but it reports all or nothing rather than varied. Is this correct?
Click to expand...
Click to collapse
Yeah this is normal.
Sent from my Nexus 4 using Tapatalk
bert682 said:
New screen in and working well.
Click to expand...
Click to collapse
Awesome! See, it wasn't too bad, was it? Ifixit gives the N4 a 7/10 for repairability, and that's pretty high for them. After replacing my N4 screen, friend/coworker asked if I could do the same for his HTC One M7 with a completely shattered, yet functional digitizer. I said "HEEEEEEEEEEELL NO!"
Planterz said:
Awesome! See, it wasn't too bad, was it? Ifixit gives the N4 a 7/10 for repairability, and that's pretty high for them. After replacing my N4 screen, friend/coworker asked if I could do the same for his HTC One M7 with a completely shattered, yet functional digitizer. I said "HEEEEEEEEEEELL NO!"
Click to expand...
Click to collapse
No, not with the correct tools. I will admit had I not bought the plastic tools, tweezers etc I may have struggled.
The battery was my main concern, its really stuck down, even though this had been replaced before and likely a less tacky glue used it was still tough. Had to use some heat to soften it and the "battery cover" has seen better days. Next thing to replace is that, just for piece of mind.
All in all, pretty nice experience, the phone seems more modular that other phones I have taken apart which is nice.