Related
Hi
I seemed to have killed my phone tonight. Originally I flashed it with HardSPL then udk Vega firmware. It seemed to work OK but TomTom wouldn't work so I tried to flash it with something else. Now it boots up with the udk Polaris flash screen and then it dies. The screen is vagually there but there is no USB connection (either through Activesync or the firmware software). The bootloader screen is showing:
POLA100
SPL-1.28.0000
CPLD-2
I've tried lots of different firmwares, the original will not install (1.25.405.1) the error is 294 INVALID VENDOR ID
Has anyone any idea how I can fix my 1 month old phone please?
Kevin
first of all,
it looks like you haven't succesfully installed hardspl
if i remember, you shold install the original rom by manualy going into bootloader (camera+reset).
After that, try and install hardspl again.
hope this helps
My phone has died to. I used it today and sudently I can not unlock it. It want either hard reset or manualy go into bootloader. When it rings, I can answer and talk, but tapping the screen do not work. I am using the Glass rom, and have used a lot of different rom`s, and it has worked perfekt all the time. To enter bootloader (camera+reset)? or (on+camera+reset)? Any tips to unlock so i can install a new rom?
camera + reset = bootloader
reflash
All sorted now, I downloaded and applied the original Australian ROM and it worked a treat. I've now properly installed HardSPL and I'm playing around with all the different ROMS
kevinbloomfield said:
All sorted now, I downloaded and applied the original Australian ROM and it worked a treat. I've now properly installed HardSPL and I'm playing around with all the different ROMS
Click to expand...
Click to collapse
Where did you get this original Aus ROM? can you post a link?
Where did you get this original Aus ROM? can you post a link?
http://forum.xda-developers.com/showthread.php?t=381600
kevinbloomfield said:
All sorted now, I downloaded and applied the original Australian ROM and it worked a treat. I've now properly installed HardSPL and I'm playing around with all the different ROMS
Click to expand...
Click to collapse
Just amazing.... My device was considered dead as well till I try and updated with the Aus original ROM! And now I'm back to business!!!!!
Thank you all my friends!!!
Direct link to the ROM:
http://www.asia.htc.com/download/RU...5.65.30.04_1.58.21.23_polaris_murata_Ship.exe
Original SPL?
Is here any chance to load original SPL. To pola100. THX
eyeless1978 said:
Is here any chance to load original SPL. To pola100. THX
Click to expand...
Click to collapse
Pleased refer this post. Install back hardspl and don't replug, wait until end session. flash back with original SPL.
My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.
mon_money said:
My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.
Click to expand...
Click to collapse
You must use a vodafone stock ROM then - the 1.66 HTC ROM flashes the stock SPL
which does not fit your CID, therefore you get the triangle.
thx for replying.
I had stock rom 1.48 before and then i installed HSPL so that i can install Stock 1.66 wwe rom into my hd2. It was a successful action. Rom installed and worked correctly without any problem.
But problem arise when I tried to uninstall the HSPL to original spl. I renamed the 1.66 rom .nbh file to LEOIMG.nbh and converted the card format into fat32 also.
when i inserted the card into hd2 and turned it on whilst pressing down volume button. its started into boot loader program and den asked me to press power button to start the process.
And then it ended with an error.. 00028002 NOT ALLOW something like that. which is for Invalid vendor ID..
Please help..
how to return to original spl with the latest 1.66 wwe rom.
thx in advance..
tictac0566 said:
You must use a vodafone stock ROM then - the 1.66 HTC ROM flashes the stock SPL
which does not fit your CID, therefore you get the triangle.
Click to expand...
Click to collapse
don't think you can, HSPL has to stay on...could be wrong though...
why do you want to take it off?
mon_money said:
thx for replying.
I had stock rom 1.48 before and then i installed HSPL so that i can install Stock 1.66 wwe rom into my hd2. It was a successful action. Rom installed and worked correctly without any problem.
But problem arise when I tried to uninstall the HSPL to original spl. I renamed the 1.66 rom .nbh file to LEOIMG.nbh and converted the card format into fat32 also.
when i inserted the card into hd2 and turned it on whilst pressing down volume button. its started into boot loader program and den asked me to press power button to start the process.
And then it ended with an error.. 02800 something like that. which is for Invalid vendor ID..
Please help..
how to return to original spl with the latest 1.66 wwe rom.
thx in advance..
Click to expand...
Click to collapse
Actually, you did everything correctly... except that you should use the stock ROM for your device, which is vodafone branded, isn´t it?
BTW, did you check the SPL version already? Because it might be already back to stock SPL, but then, you won´t be able to flash an original HTC ROM.
Being back at stock SPL (with vodafone CID) and trying to flash/launch an official HTC ROM on the branded device results in what you write!
Hmm.. is there any harm if i don't remove HSPL??? as m still trying to make my HD2 working..
error coming is 00028002 NOT ALLOW
EddyOS said:
don't think you can, HSPL has to stay on...could be wrong though...
why do you want to take it off?
Click to expand...
Click to collapse
mon_money said:
Hmm.. is there any harm if i don't remove HSPL??? as m still trying to make my HD2 working..
error coming is 00028002 NOT ALLOW
Click to expand...
Click to collapse
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.
BIG thank you .. it is working now with the stock 1.43 rom.. and yes u are right.. it was showing me again 1.42 spl after uninstalling the HSPL.
u saved my hd2.. thx once again for ur great help..
tictac0566 said:
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.
Click to expand...
Click to collapse
tictac0566 said:
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.
Click to expand...
Click to collapse
Hi
Thanks for the link, however the 1.43 ROM is corrupt, I have tried downloading several times. I try to extra the RUU_Signed.nbh with winrar but it fails, the 1.66 and 1.72 Vodafone ROMs extract fine.
Basically I am trying to restore a Vodafone HD2 to stock ROM+SPL, reason being the phone they sent on an insurance replacement is rubbish e.g. the touchscreen isn't responsive. I tried changing to a custom ROM also Vodafone 1.66 and 1.72 to see if the problem would be fixed but it didn't help.
Now I just need to send the phone back for another replacement.
Does anyone have an alternative link for this 1.43 ROM?
I am having a similar issue.
I am trying remove HSPL, I have copied the .nbh file over to the SD already formatted as FAT 32 - I'm using my original ROM.
(RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Shp )
Also tried with ( RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship )
When I start with volume down pressed, I get a message saying " Upgrade ROM code error please try again " then the multi coloured screen with SPL-1.42.0000 XE.
Please help, I fear I have broken my phone ...
chrisukhd2 said:
(RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Shp )
Also tried with ( RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship )
Click to expand...
Click to collapse
Then your phone is probably provider rom locked.
SPL-1.42.0000 XE.
Click to expand...
Click to collapse
HSPL is already removed, which is why the WWE roms don't work. You need to find your provider released rom, or (far easier) run hspl2, choose 1.42.hspl, flash either of teh roms you mentioned above by USB, run hspl2 again, choose 1.42.0000 and done.
samsamuel
Thanks for the reply.
I can't use HSPL2 as the phone doesn't sink to my PC as it's stuck on the tri colour screen. Unless there is a way of doing this from the memory card.
I'm pretty sure my stock ROM was 1.43, which I have downloaded but can't re flash?.
I guess I need to download a 1.42 O2 ROM from somewhere?
chrisukhd2 said:
samsamuel
Thanks for the reply.
I can't use HSPL2 as the phone doesn't sink to my PC as it's stuck on the tri colour screen. Unless there is a way of doing this from the memory card.
I'm pretty sure my stock ROM was 1.43, which I have downloaded but can't re flash?.
I guess I need to download a 1.42 O2 ROM from somewhere?
Click to expand...
Click to collapse
No need to sync to pc. In bootloader, connect usb cable - when USB shows on the screen then run HSPL2
ClydeB1 said:
No need to sync to pc. In bootloader, connect usb cable - when USB shows on the screen then run HSPL2
Click to expand...
Click to collapse
pre - and indeed - cisely
OK this is using the 1.48 ROM
Used HSPL2 and hacked to 1.42.hspl, pressed power to start update image, and the ROM loaded but then goes back to the tri colour screen again. So I ran flashed through USB 1.48 ROM and got " Invalid Vendor ID " ?
I tried HSPL2 again to hack to 1.42.0000 and then re-flash through USB and got " invalid vendor ID again "
I even tried with HSPL I had before and the same result.
Argghhhhhh
What can I be doing wrong here ?
Working now
I downloaded the latest O2 ROM 1.72.0 etc and it's working now.
Thanks again guys, you helped me a lot
Once more thing my phone now say's it has SPL-1.66 - I guess when unlocking using HSPL2, I now need to choose 1.66.000?
mon_money said:
My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.
Click to expand...
Click to collapse
1. download stock ROM
2. unpack/unzip and place ruu_signed.nbh and ROMUpdateUtility in sd card
3. make sure you have >50% battery life
4. with the device turned off, put sd card in
5. enter boot loader, device will automatically detect ROM file in sd card and
then will install this, it will install stock spl as well so hspl will be removed
chrisukhd2 said:
OK this is using the 1.48 ROM
Used HSPL2 and hacked to 1.42.hspl, pressed power to start update image, and the ROM loaded but then goes back to the tri colour screen again. So I ran flashed through USB 1.48 ROM and got " Invalid Vendor ID " ?
Click to expand...
Click to collapse
sounds like you tried to flash over sd card, which as any fule kno first thing it does is resets the spl, so hspl is no longer installed so the rest of the flash fails.
I tried HSPL2 again to hack to 1.42.0000 and then re-flash through USB and got " invalid vendor ID again "
Click to expand...
Click to collapse
because its .0000
I even tried with HSPL I had before and the same result.
Argghhhhhh
Click to expand...
Click to collapse
used sd card again eh?
1 - boot the phone to bootloader. (Three coloured screen)
2 - run hspl2, choose whatever spl you like SO LONG AS it ends HSPL.
3 - when the phone reboots, keep volume down pressed to re enter bootloader
4 - run your rom flash over USB
5 - phone should now boot normally.
6 - if you now want to remove hspl again, re run HSPL2 and choose the spl you want, ENDING IN .0000
samsamuel
Yes Doh - I was flashing from SD and then trying to flash through USB. It all makes sense now. I got around it though by using the new O2 ROM that's just been released so I didn't need to unlock to bring my phone back to life.
Anyway it's all working fine now with the stock 1.72 O2 ROM, just flashed with HSPL2 and re-installed the Energy ROM.
Thanks again for all the help.
ahh good.
Its a good idea if you flash fairly regularly to do your flashing from bootloader, that way you are visually aware of your spl at every step. just get used to holding vol down as it reboots and you can do the whole thing, hspl, rom, radio, without ever having to pull the battery. just keep booting to tri colour till its done.
Hi All,
For those of you, who wants to go back to the WM 6.1 WWE 1.35.720.2 Stock ROM on the Viva, here it is...
This is the lastest english ROM that you can get from HTC. You may use this for warranty purpose or if you prefer going back to the stock ROM. This ROM has the Idea logo. The entire package was assembled from official HTC updates and has no customization/personalization at all. After applying this, you may want to use "stockspl" (see sticky thread) for warranty purpose.
Cheers!
thanks ddl.team but after flashing, it says: Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center.
Thank you ddl.team. After flashing, I receive the same message "Your OS isn't customized for your hardware."
me 2
HI I recive that message to, the big problem is that I can't install another ROM after this, I tried to flash hard spl 1 and 2 but it has no effect. Please give me a solution.
Okay. This ROM has the official Radio, IPL, SPL and Splash. If required, remove those using HTC ROM Image Editor and try to reflash. Make sure your SPL is 2.00.cmon (use HardSPL first). Then after flasing this, go back to stockspl.
ddl.team said:
Okay. This ROM has the official Radio, IPL, SPL and Splash. If required, remove those using HTC ROM Image Editor and try to reflash. Make sure your SPL is 2.00.cmon (use HardSPL first). Then after flasing this, go back to stockspl.
Click to expand...
Click to collapse
Hi. I tried as you said, but still no succes . Don't know what to try now.
no can do. thanks anyway.
1parsec said:
Hi. I tried as you said, but still no succes . Don't know what to try now.
Click to expand...
Click to collapse
TheRem said:
no can do. thanks anyway.
Click to expand...
Click to collapse
Even after removing ipl, stock radio etc it is not working for you both? It should work after removing it. I will try it later.
SPL
after I install this rom I can't Hard Spl again I'v tried with Opal_HardSPL_v2 and Opal_HardSPL_v1 there ar no working anymore, please give us a solution cuz now I can't instal another rom and with this my htc is useless.
SPL
The error from hard spl is 270 - the image file is corupted
is that rom really for TOUCH VIVA?
hi
Dowload the rom from here,
rapidshare.com/files/221263704/_file_RUU_Opal_hTC_Asia_WWE_1.27.707.1_infineongsm4.1.13.66_03.29.90_Ship.rar
Hold your volume down button and press reset, tri colour disply appear on your screen, connect usb cable to your ppc, then update with the above official rom update
s_p_mudakuzha said:
Dowload the rom from here,
rapidshare.com/files/221263704/_file_RUU_Opal_hTC_Asia_WWE_1.27.707.1_infineongsm4.1.13.66_03.29.90_Ship.rar
Hold your volume down button and press reset, tri colour disply appear on your screen, connect usb cable to your ppc, then update with the above official rom update
Click to expand...
Click to collapse
Thats an old rom, we have more latest 1.35.720.1
Originally Posted by s_p_mudakuzha
Dowload the rom from here,
rapidshare.com/files/221263704/_file_RUU_Opal_hTC_Asia_WWE_1.27.707.1_infineongsm 4.1.13.66_03.29.90_Ship.rar
Hold your volume down button and press reset, tri colour disply appear on your screen, connect usb cable to your ppc, then update with the above official rom update
Thats an old rom, we have more latest 1.35.720.1
Sorry Mr. Jagan actually i was replaying to mr.menix , He is having problem after flashing this rom.
Alright, no need to be sorry.
thanks
thanks but is not working, i'v broken my phone with this version ROM.
For people who have issues with this ROM, flash a different ROM using the method described in the thread "HOW TO: Flash ROMS via an SD Card to your Opal".
This ROM was dumped from an HTC Touch Viva T2223 and is 100% original and untouched. I am not sure why this is not working for some of you. I have flashed this on my Viva twice now without any issues.
After flashing this ROM, I get the following:
OBNL 1.57.0000
SPL 1.26.0000 (post applying stockspl; was 2.00.cmon before)
GSM 03.29.90
OS 1.35.0.0
jagan2 said:
Thats an old rom, we have more latest 1.35.720.1
Click to expand...
Click to collapse
Hi Jagan,
Where can i find the latest one? I mean 1.35.720.1.
ddl.team said:
OBNL 1.57.0000
SPL 1.26.0000 (post applying stockspl; was 2.00.cmon before)
GSM 03.29.90
OS 1.35.0.0
Click to expand...
Click to collapse
Cannot apply stockspl. SPL 2.00.cmon still remains. I guess that is the problem, but I don't know how to revert to SPL 1.26. I tried everything, but 2.00.cmon is still there .
Thank you anyway.
Tools to dump ROM
Sorry if I am posting in the wrong thread, but are there any tools to backup the original SPL and ROM before we start flashing the cooked ROMS? As with this any unknown issues can be ruled out in case if we need to revert back to the stock ROM.
Thanks in advance.
I'm having a little problem with the super display of my BIG(marvelous)HD2..
Now after some months of playing with roms and others, i have two stains/halos near/under the battery connectors and processor..(anyone has the same ?)
I'm thinking to deliver it in Htc center
but surely not with the AxLor 10 rom flashed in...
So to reset it in Factory condition how i have to do?
I was thinking to execute Task29, and then install the 1.66 original rom
but i don't now if its all right,probably i forgot some things..
so pleeeeeeeeeeeese
can someone help me?
Thanks!!!!!
TommyRose said:
...........
I was thinking to execute Task29, and then install the 1.66 original rom
but i don't now if its all right,probably i forgot some things..
Click to expand...
Click to collapse
That's all you need to do mate!!!
Your HD2 will be in the very first condition from HTC.
Task29 will remove the rom and when you put your original rom back on, you can do it 1 of 2 ways:
- either flash it via sd card, or
- flash via pc and then run HSPL2 and change hspl back to spl 1.66.0000
The removal of hspl is key as most service centres will check for this
Billytheking said:
That's all you need to do mate!!!
Your HD2 will be in the very first condition from HTC.
Click to expand...
Click to collapse
Guys you are great!
so the proceedure is ok..?!?!? thanks Billy
i'll make it alll from pc..
TommyRose said:
Guys your are great!
so the proceedure is ok..?!?!? thanks Billy
i'll make it alll from pc..
Click to expand...
Click to collapse
Check your spl version to make sure hspl has been removed
Sorry Clyde..
how to check?
the original rom upgrade is an exe file so, i think i will be ok the spl on tasked29 memory.. i think..
probably this afternoon i'll try all..i'll let you know!
re-thanks guys
TommyRose said:
Sorry Clyde..
how to check?
the original rom upgrade is an exe file so, i think i will be ok the spl on tasked29 memory.. i think..
probably this afternoon i'll try all..i'll let you know!
re-thanks guys
Click to expand...
Click to collapse
No, running the exe file will not replace the spl version. This can only be done if you flash the rom.nbh file via the sd card.
The easiest way though is to run the exe and then use hspl2 to revert to your stock spl. To check your spl version, switch the device off and then while holding the volume down button in switch the device on. It will boot up in a multicoloured screen and will display the spl version.
i executed the task29 by ShaDrac ( with radio....)
now when i enter in boot loader: picture it's really bad.. I have:
PB81100 HK-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
i don't think it's ok.. I'm not sure..
reading CotullaHSPL, it means it was not factory default.. or not ? bhuuuu..
the rom now is 1.66..
pleeeze it's factory default now?
its only stock once the spl ends .0000
like clyde mentioned, your next step is to run hspl2 and choose an spl that ends 0000, and that will remove the 1.42.hspl and replace it with stock.
Go for 1.66.0000 since that is the rom you are running.
thanks today i'll try now i have to gooo
thaaaaaankz
NO, the 1.66 rom comes with the 1.42 SPL, flash that.
RaiderX303 said:
NO, the 1.66 rom comes with the 1.42 SPL, flash that.
Click to expand...
Click to collapse
no, it doesn't. But it doesnt matter, they will both work.
ok.. i use the hspl2 loading 1.42.0000 and reflashing the original ITA 1.66 radio-rom..
so
it's all ok now for the factory standard staatus??
want to re-have my perfect BIG displays..
can i send it so done, in assistance?
in the image you can see (+or-) the end boot loader result..
thankz again guys
then i'm thinking to keep the original rom just tweaked with cookie's super add-onS and somethings else,preventing any problems...
yea thats fine.
ok.... i have finally got my hd2 2 the point where im happy with all apps and mods ect ect... however i am lookin 4 a way 2 restore it 2 the exact original i got out of the box... i mean everything restored... reg entrys... rom... spl... ect ect as i have changed and rechanged everything so many times i think i have a few bugs.... so my plan is 2 restore everything and set it to how i have it now in 1 go so i dont ''piss it off'' in random changes... my specs are below in my signature which look pretty standard but i have done many registry tweaks and installed many applications which i have chopped and changed many times... also tried to install duttys rom many times but that kept failing and hspl would never install so that could maybe be a small factor in the few bugs i have... the main bugs are to do with random freezing here and there... battery drain... and overall performance... im aware some of this is due to the apps i have installed but i had a very simmilar setup a short while ago and this worked fine... but as im never happy with what i have i messed around a lil more and here i am... so any advice would be grately aprieciated... and if any software is required could u possibly post the links....??? many thanks in advance... luke
2|OP|
So what happened? Could you spl to factory one?
Is there a way to get the stock .img file off the sd card? or is it not on it from htc/tmobile??
Set By Set HTC HD2 rom install
I'm new to this rom, rooting, and unlocking game...I hate what I did to the phone I want to return it to it's factory settings. What's the best way to return my HTC HD2 back to the way it was when I opened the box?!?
do ao search for it bud, loads of posts about it, best way tho is writing it off the SD!
check here http://forum.xda-developers.com/showthread.php?t=577717
Here is the new RUU_Mozart_S_HTC_Europe_5.01.401.04_5.71.09.02a_22 .51.50, unlocked and ready to go:
http://www.4shared.com/file/LgeeWQfG/Mozart_YardieROM_v3_501_7720.html
Changelog:
Developer Unlocked,max apps and prevent relock.
Custclear.provxml added to /windows
HTC theme replaced with grey theme
Alert tones 1-3 replaced with "you got Mail"etc
Internet explorer first run to google.
Added XBMods certs for update cabs.
SPL removed.
Instructions-
Be aware of XSPL issue with Mozart 4.XX & 5.XXroms, if required flash back to a NoDo rom before flashing XSPL.
1.Enter bootloader(Power on& vol-)
2.Flash RSPL(downgrade to NoDo if on 4.xx or 5.xx SPL)
3.Flash YardieROM using Rom Update Utility.
Respects out to Cotulla&DFT,bepe,ansar,XBMod,Football,Marvin_S,DaG,AnDim ,Ted973,Heathcliff74,airextreme&ceesheim for all the work they have put into WP7 development and creating the tools for us to play with.
--Reserved--
thank, after flashed will change the spl version? or stay with old hspl?
hengmy said:
thank, after flashed will change the spl version? or stay with old hspl?
Click to expand...
Click to collapse
It will remain with your original spl
Add Lang.
Is this rom able to work with RegistryEditor 1.2.0.0?
But it seems unable to save string I added.
thx
ps. I've managed to add Chinese to this ROM.
kevin3688 said:
Is this rom able to work with RegistryEditor 1.2.0.0?
I'm trying to add Chinese with RegistryEditor 1.2.0.0.
But it seems unable to save string I added.
thx
Click to expand...
Click to collapse
RUU_Mozart_S_HTC_Europe_5.01.401.04_5.71.09.02a_22 .51.50
Europe region... it means there is no chinese language pack in it.
The Registry Program 1.2.0 works
I need original theme, the new theme and Alert tones is not good.
I tried to flash your Rom it struck at 7%, luckily it didn't change my bootloader, back to Ansar's, thanks anyways.
the charging sound had been changed to "you got a voice message" not a big issue but.......
yardie.spike said:
It will remain with your original spl
Click to expand...
Click to collapse
Not good ... Is it reverssible ?
Caramel said:
Not good ... Is it reverssible ?
Click to expand...
Click to collapse
Whats not good?.....it means you can use XSPL and flash the latest roms rather than brick your Mozart.
Cheers Yardie boy
Loading it now
Be carrefull !!!
Begin flash with HSPL 1.32
Freeze while flashing
Reboot in bootloader to restart the flash.
Unable to flash again, Why ?
This rom put my Mozart in SPL 5.1, unable to go back in HSPL.
Caramel said:
Be carrefull !!!
Begin flash with HSPL 1.32
Freeze while flashing
Reboot in bootloader to restart the flash.
Unable to flash again, Why ?
This rom put my Mozart in SPL 5.1, unable to go back in HSPL.
Click to expand...
Click to collapse
No issue with HSPL 1.32 for me...no change in SPL either, what did you do different?
You could alwasy load an OSPL then put RSPL/HSPL on again.
The only little snag I noticed was connection set-up kept launching every reboot, which was resolved by deleting it...