Database Users

Bricked Cruise? Need Help.

Okay, so I'm an idiot. I'm completely lost now. Here's the basic facts:
Hard-SPL install was unsuccessful, but I didn't notice. So I'm still with original SPL.
I started upgrading the ROM with original SPL, which of course crashes at 3 percent.
Now I can't get back into WM. It's stuck at the 'smart mobility screen'.
So the problem is: it won't let me install any ROMs because original SPL is still on there. I can't change to hard-SPL anymore either. The ROM that's on the machine doesn't seem to work anymore. When I try to install an original ROM it says I can't use this utility. I think I need to download an official ROM + installer, but I can't find any from HTC.
Alright, so skip all the noob and idiot comments please, I already know. But where do I go from here?
Please help!

Bricked Cruise
hansdekker said:
Okay, so I'm an idiot. I'm completely lost now. Here's the basic facts:
Hard-SPL install was unsuccessful, but I didn't notice. So I'm still with original SPL.
I started upgrading the ROM with original SPL, which of course crashes at 3 percent.
Now I can't get back into WM. It's stuck at the 'smart mobility screen'.
So the problem is: it won't let me install any ROMs because original SPL is still on there. I can't change to hard-SPL anymore either. The ROM that's on the machine doesn't seem to work anymore. When I try to install an original ROM it says I can't use this utility. I think I need to download an official ROM + installer, but I can't find any from HTC.
Alright, so skip all the noob and idiot comments please, I already know. But where do I go from here?
Please help!
Click to expand...
Click to collapse
First you can try a hard reset!
Here you can download the original shipped rom with installer.
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
kr.,
Frepke

Update
Update
Okay, so I did the hard reset as described here. No luck.
So I went back to the bootloader screen (original SPL) and tried the original rom and installer from the download link. Again, no luck. It says "Error [294] Invalid Vender ID. This utility cannot be used for your PDA phone. Please check your update utility." The phone was unlocked when I bought it, it's HTC branded. Is there another installer out there?
I've also tried loading several roms by putting them on SD, renamed as POLAIMG.nbh. (including the orginal rom, extracted from the downloaded installer). For the original Rom, it will say 'loading...', then 'checking...' and then it will tell me: "00028002 - not allow". Then it goes back to the three colour spl screen.
There's also a link here on the forum which I'm not sure is good advice.

Three colour screen info
Pola100
Spl-1.25.0000
Cpld-2

hansdekker said:
Update
Okay, so I did the hard reset as described here. No luck.
So I went back to the bootloader screen (original SPL) and tried the original rom and installer from the download link. Again, no luck. It says "Error [294] Invalid Vender ID. This utility cannot be used for your PDA phone. Please check your update utility." The phone was unlocked when I bought it, it's HTC branded. Is there another installer out there?
I've also tried loading several roms by putting them on SD, renamed as POLAIMG.nbh. (including the orginal rom, extracted from the downloaded installer). For the original Rom, it will say 'loading...', then 'checking...' and then it will tell me: "00028002 - not allow". Then it goes back to the three colour spl screen.
There's also a link here on the forum which I'm not sure is good advice.
Click to expand...
Click to collapse
Hi
Ths info I posted relates to the Kaiser (kaiser [nearly] equals Polaris in terms of hardware) and the MTTY is from the ELF forum.
"set 16 0" to tell bootloader to boot the OS after reset.
"task 8" to get your device formatted
I suggest the set 16 0 and a reset to see if that helps, I do advocate you searching for these commands and checking they are applicable.
The info was from this KAISER thread
http://forum.xda-developers.com/showthread.php?p=2103884
HTH
Leon

MTTY
Thanks for your advice guys.
I tried the "set 16 0" command + reset. Still same situation.
Any other tips anyone?

Darn
No more reponses?
It is probably bricked then.
So what's my next move...trash it?

hansdekker said:
No more reponses?
It is probably bricked then.
So what's my next move...trash it?
Click to expand...
Click to collapse
try flashing using sd card

Tupac_Shakur said:
try flashing using sd card
Click to expand...
Click to collapse
I think he wrote already that he tried to flash some ROMS using SD card... (POLAIMG.NBH). Not sure though if he tried re Hard-SPL'ing using the SD flash method...
So I would suggest to retry the HardSPL using the POLAIMG.NBH method (just as if the HardSPL's .NBH file was a normal ROM) if this hasn't been tried yet...

Hey you must careffuly read mtty in kaiser thread.....mtty can brick your device for entire life.....my advice to you is pm GSLEON3
he's the master of using mtty and lot of kaiser user saved by him...
Hope this can help you
cheers

The Facts
When I try to hard-spl through the SD-card, it just says "Loading..." and that's where it stays - Even if I leave it till the battery dies. I tried the 2.10 and 1.10 versions on this page.

Are you sure? This Hard SPL suit for Hermes. You have to use this: http://forum.xda-developers.com/showthread.php?t=375338
TB

Hard-SPL through SD
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...

How to flash your Polaris using the microSD card [Guide]
hansdekker said:
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...
Click to expand...
Click to collapse
Hi,
Try this thread :
http://forum.xda-developers.com/showthread.php?t=384084
How to flash your Polaris using the microSD card [Guide]
TB

It's starting to seem really hopeless
Thanks.
Same result. The screen just says "Loading..." and stays there.

hansdekker said:
Thanks.
Same result. The screen just says "Loading..." and stays there.
Click to expand...
Click to collapse
unplug usb and replug it

hansdekker said:
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...
Click to expand...
Click to collapse
1. You can not flash hard-spl with microSD method! (hard-spl flash use jumpspl to ignore cid-lock. But with microSD card method you will not use jumpspl, so you can not flash hard-spl! (and to use microSD method you have to have hard-spl on your pda)
2. If you unzip hard-spl on your pc will be an RUU_signed.nbh. This is the rom file, but you can not to flash it with microSD.
3. Your device is bricked, I think. Take it to repair!

after an unsuccessful flash, u shud never try to flash again, high chance of permanently bricking your pda. go contact GSLEON3, he saved my kaiser from bricking when i made the same mistake as u. helpful fellow. make sure u donate lol

Accepted Defeat
Hi
I accepted defeat and exchanged the unit.
Thanks for all the help.
H

Do I have the first brick?

Hi all.
Do I have the first brick Cruise?
http://i27.tinypic.com/118ppjt.jpg
I have used several of the roms posted here, nice work
I have ordered the new Diamond so I desided to go back to the Swedish dumped rom.
Used original spl, worked fine I guess..
When I was flashing the new rom it got to aprox 50%, after that i got an error. Don't remember what the error code was.
Now im stuck in bootmode!?. Can't run Hard spl or original spl, it wont flash any roms.
It recognizes the device but wont start the flash process.
Have read trough the forum for tips but nothing has worked so far.
Any ideas?
Regards Pasi

You should try this:
http://forum.xda-developers.com/showpost.php?p=2003948&postcount=2

fktsndr said:
You should try this:
http://forum.xda-developers.com/showpost.php?p=2003948&postcount=2
Click to expand...
Click to collapse
Thank's mate
Worked. Had problems finding what mtty was. Now I know that it is a program mtty.exe.

Your first steps was wrong...
-flash hard-spl
-flash dumped swedis rom
-flash original radio
-flash original spl

Cannot uninstall HSPL after installing 1.66 wwe rom

My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.

mon_money said:
My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.
Click to expand...
Click to collapse
You must use a vodafone stock ROM then - the 1.66 HTC ROM flashes the stock SPL
which does not fit your CID, therefore you get the triangle.

thx for replying.
I had stock rom 1.48 before and then i installed HSPL so that i can install Stock 1.66 wwe rom into my hd2. It was a successful action. Rom installed and worked correctly without any problem.
But problem arise when I tried to uninstall the HSPL to original spl. I renamed the 1.66 rom .nbh file to LEOIMG.nbh and converted the card format into fat32 also.
when i inserted the card into hd2 and turned it on whilst pressing down volume button. its started into boot loader program and den asked me to press power button to start the process.
And then it ended with an error.. 00028002 NOT ALLOW something like that. which is for Invalid vendor ID..
Please help..
how to return to original spl with the latest 1.66 wwe rom.
thx in advance..
tictac0566 said:
You must use a vodafone stock ROM then - the 1.66 HTC ROM flashes the stock SPL
which does not fit your CID, therefore you get the triangle.
Click to expand...
Click to collapse

don't think you can, HSPL has to stay on...could be wrong though...
why do you want to take it off?

mon_money said:
thx for replying.
I had stock rom 1.48 before and then i installed HSPL so that i can install Stock 1.66 wwe rom into my hd2. It was a successful action. Rom installed and worked correctly without any problem.
But problem arise when I tried to uninstall the HSPL to original spl. I renamed the 1.66 rom .nbh file to LEOIMG.nbh and converted the card format into fat32 also.
when i inserted the card into hd2 and turned it on whilst pressing down volume button. its started into boot loader program and den asked me to press power button to start the process.
And then it ended with an error.. 02800 something like that. which is for Invalid vendor ID..
Please help..
how to return to original spl with the latest 1.66 wwe rom.
thx in advance..
Click to expand...
Click to collapse
Actually, you did everything correctly... except that you should use the stock ROM for your device, which is vodafone branded, isn´t it?
BTW, did you check the SPL version already? Because it might be already back to stock SPL, but then, you won´t be able to flash an original HTC ROM.
Being back at stock SPL (with vodafone CID) and trying to flash/launch an official HTC ROM on the branded device results in what you write!

Hmm.. is there any harm if i don't remove HSPL??? as m still trying to make my HD2 working..
error coming is 00028002 NOT ALLOW
EddyOS said:
don't think you can, HSPL has to stay on...could be wrong though...
why do you want to take it off?
Click to expand...
Click to collapse

mon_money said:
Hmm.. is there any harm if i don't remove HSPL??? as m still trying to make my HD2 working..
error coming is 00028002 NOT ALLOW
Click to expand...
Click to collapse
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.

BIG thank you .. it is working now with the stock 1.43 rom.. and yes u are right.. it was showing me again 1.42 spl after uninstalling the HSPL.
u saved my hd2.. thx once again for ur great help..
tictac0566 said:
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.
Click to expand...
Click to collapse

tictac0566 said:
Get the original 1.43 vodafone UK ROM from here, and repeat what you did.
Follow the first link, select 1.43, then obviously the vodafone ROM.
EDIT PS:
In case you want to keep the stock SPL, but upgrade to the 1.66 HTC ROM, you must do this using SSPL (search for this here in the forum).
As of today, there is no other way of getting the stock SPL back than flashing your original ROM.
Click to expand...
Click to collapse
Hi
Thanks for the link, however the 1.43 ROM is corrupt, I have tried downloading several times. I try to extra the RUU_Signed.nbh with winrar but it fails, the 1.66 and 1.72 Vodafone ROMs extract fine.
Basically I am trying to restore a Vodafone HD2 to stock ROM+SPL, reason being the phone they sent on an insurance replacement is rubbish e.g. the touchscreen isn't responsive. I tried changing to a custom ROM also Vodafone 1.66 and 1.72 to see if the problem would be fixed but it didn't help.
Now I just need to send the phone back for another replacement.
Does anyone have an alternative link for this 1.43 ROM?

I am having a similar issue.
I am trying remove HSPL, I have copied the .nbh file over to the SD already formatted as FAT 32 - I'm using my original ROM.
(RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Shp )
Also tried with ( RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship )
When I start with volume down pressed, I get a message saying " Upgrade ROM code error please try again " then the multi coloured screen with SPL-1.42.0000 XE.
Please help, I fear I have broken my phone ...

chrisukhd2 said:
(RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Shp )
Also tried with ( RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship )
Click to expand...
Click to collapse
Then your phone is probably provider rom locked.
SPL-1.42.0000 XE.
Click to expand...
Click to collapse
HSPL is already removed, which is why the WWE roms don't work. You need to find your provider released rom, or (far easier) run hspl2, choose 1.42.hspl, flash either of teh roms you mentioned above by USB, run hspl2 again, choose 1.42.0000 and done.

samsamuel
Thanks for the reply.
I can't use HSPL2 as the phone doesn't sink to my PC as it's stuck on the tri colour screen. Unless there is a way of doing this from the memory card.
I'm pretty sure my stock ROM was 1.43, which I have downloaded but can't re flash?.
I guess I need to download a 1.42 O2 ROM from somewhere?

chrisukhd2 said:
samsamuel
Thanks for the reply.
I can't use HSPL2 as the phone doesn't sink to my PC as it's stuck on the tri colour screen. Unless there is a way of doing this from the memory card.
I'm pretty sure my stock ROM was 1.43, which I have downloaded but can't re flash?.
I guess I need to download a 1.42 O2 ROM from somewhere?
Click to expand...
Click to collapse
No need to sync to pc. In bootloader, connect usb cable - when USB shows on the screen then run HSPL2

ClydeB1 said:
No need to sync to pc. In bootloader, connect usb cable - when USB shows on the screen then run HSPL2
Click to expand...
Click to collapse
pre - and indeed - cisely

OK this is using the 1.48 ROM
Used HSPL2 and hacked to 1.42.hspl, pressed power to start update image, and the ROM loaded but then goes back to the tri colour screen again. So I ran flashed through USB 1.48 ROM and got " Invalid Vendor ID " ?
I tried HSPL2 again to hack to 1.42.0000 and then re-flash through USB and got " invalid vendor ID again "
I even tried with HSPL I had before and the same result.
Argghhhhhh
What can I be doing wrong here ?

Working now
I downloaded the latest O2 ROM 1.72.0 etc and it's working now.
Thanks again guys, you helped me a lot
Once more thing my phone now say's it has SPL-1.66 - I guess when unlocking using HSPL2, I now need to choose 1.66.000?

mon_money said:
My hd2 bricks after i tried uninstalling hspl with the help of stock rru_signed.nbh file. it is not working now. just a traingle with ! this coming.
any help.. hd2 i have is a vodafone uk stock rom.
Click to expand...
Click to collapse
1. download stock ROM
2. unpack/unzip and place ruu_signed.nbh and ROMUpdateUtility in sd card
3. make sure you have >50% battery life
4. with the device turned off, put sd card in
5. enter boot loader, device will automatically detect ROM file in sd card and
then will install this, it will install stock spl as well so hspl will be removed

chrisukhd2 said:
OK this is using the 1.48 ROM
Used HSPL2 and hacked to 1.42.hspl, pressed power to start update image, and the ROM loaded but then goes back to the tri colour screen again. So I ran flashed through USB 1.48 ROM and got " Invalid Vendor ID " ?
Click to expand...
Click to collapse
sounds like you tried to flash over sd card, which as any fule kno first thing it does is resets the spl, so hspl is no longer installed so the rest of the flash fails.
I tried HSPL2 again to hack to 1.42.0000 and then re-flash through USB and got " invalid vendor ID again "
Click to expand...
Click to collapse
because its .0000
I even tried with HSPL I had before and the same result.
Argghhhhhh
Click to expand...
Click to collapse
used sd card again eh?
1 - boot the phone to bootloader. (Three coloured screen)
2 - run hspl2, choose whatever spl you like SO LONG AS it ends HSPL.
3 - when the phone reboots, keep volume down pressed to re enter bootloader
4 - run your rom flash over USB
5 - phone should now boot normally.
6 - if you now want to remove hspl again, re run HSPL2 and choose the spl you want, ENDING IN .0000

samsamuel
Yes Doh - I was flashing from SD and then trying to flash through USB. It all makes sense now. I got around it though by using the new O2 ROM that's just been released so I didn't need to unlock to bring my phone back to life.
Anyway it's all working fine now with the stock 1.72 O2 ROM, just flashed with HSPL2 and re-installed the Energy ROM.
Thanks again for all the help.

ahh good.
Its a good idea if you flash fairly regularly to do your flashing from bootloader, that way you are visually aware of your spl at every step. just get used to holding vol down as it reboots and you can do the whole thing, hspl, rom, radio, without ever having to pull the battery. just keep booting to tri colour till its done.

HTC Opal WM 6.1 WWE 1.35.720.2 Stock ROM

Hi All,
For those of you, who wants to go back to the WM 6.1 WWE 1.35.720.2 Stock ROM on the Viva, here it is...
This is the lastest english ROM that you can get from HTC. You may use this for warranty purpose or if you prefer going back to the stock ROM. This ROM has the Idea logo. The entire package was assembled from official HTC updates and has no customization/personalization at all. After applying this, you may want to use "stockspl" (see sticky thread) for warranty purpose.
Cheers!

thanks ddl.team but after flashing, it says: Your OS ROM isn't customized for your hardware. Please reflash the proper ROM code or contact the service center.

Thank you ddl.team. After flashing, I receive the same message "Your OS isn't customized for your hardware."

me 2
HI I recive that message to, the big problem is that I can't install another ROM after this, I tried to flash hard spl 1 and 2 but it has no effect. Please give me a solution.

Okay. This ROM has the official Radio, IPL, SPL and Splash. If required, remove those using HTC ROM Image Editor and try to reflash. Make sure your SPL is 2.00.cmon (use HardSPL first). Then after flasing this, go back to stockspl.

ddl.team said:
Okay. This ROM has the official Radio, IPL, SPL and Splash. If required, remove those using HTC ROM Image Editor and try to reflash. Make sure your SPL is 2.00.cmon (use HardSPL first). Then after flasing this, go back to stockspl.
Click to expand...
Click to collapse
Hi. I tried as you said, but still no succes . Don't know what to try now.

no can do. thanks anyway.

1parsec said:
Hi. I tried as you said, but still no succes . Don't know what to try now.
Click to expand...
Click to collapse
TheRem said:
no can do. thanks anyway.
Click to expand...
Click to collapse
Even after removing ipl, stock radio etc it is not working for you both? It should work after removing it. I will try it later.

SPL
after I install this rom I can't Hard Spl again I'v tried with Opal_HardSPL_v2 and Opal_HardSPL_v1 there ar no working anymore, please give us a solution cuz now I can't instal another rom and with this my htc is useless.

SPL
The error from hard spl is 270 - the image file is corupted

is that rom really for TOUCH VIVA?

hi
Dowload the rom from here,
rapidshare.com/files/221263704/_file_RUU_Opal_hTC_Asia_WWE_1.27.707.1_infineongsm4.1.13.66_03.29.90_Ship.rar
Hold your volume down button and press reset, tri colour disply appear on your screen, connect usb cable to your ppc, then update with the above official rom update

s_p_mudakuzha said:
Dowload the rom from here,
rapidshare.com/files/221263704/_file_RUU_Opal_hTC_Asia_WWE_1.27.707.1_infineongsm4.1.13.66_03.29.90_Ship.rar
Hold your volume down button and press reset, tri colour disply appear on your screen, connect usb cable to your ppc, then update with the above official rom update
Click to expand...
Click to collapse
Thats an old rom, we have more latest 1.35.720.1

Originally Posted by s_p_mudakuzha
Dowload the rom from here,
rapidshare.com/files/221263704/_file_RUU_Opal_hTC_Asia_WWE_1.27.707.1_infineongsm 4.1.13.66_03.29.90_Ship.rar
Hold your volume down button and press reset, tri colour disply appear on your screen, connect usb cable to your ppc, then update with the above official rom update
Thats an old rom, we have more latest 1.35.720.1
Sorry Mr. Jagan actually i was replaying to mr.menix , He is having problem after flashing this rom.

Alright, no need to be sorry.

thanks
thanks but is not working, i'v broken my phone with this version ROM.

For people who have issues with this ROM, flash a different ROM using the method described in the thread "HOW TO: Flash ROMS via an SD Card to your Opal".
This ROM was dumped from an HTC Touch Viva T2223 and is 100% original and untouched. I am not sure why this is not working for some of you. I have flashed this on my Viva twice now without any issues.
After flashing this ROM, I get the following:
OBNL 1.57.0000
SPL 1.26.0000 (post applying stockspl; was 2.00.cmon before)
GSM 03.29.90
OS 1.35.0.0

jagan2 said:
Thats an old rom, we have more latest 1.35.720.1
Click to expand...
Click to collapse
Hi Jagan,
Where can i find the latest one? I mean 1.35.720.1.

ddl.team said:
OBNL 1.57.0000
SPL 1.26.0000 (post applying stockspl; was 2.00.cmon before)
GSM 03.29.90
OS 1.35.0.0
Click to expand...
Click to collapse
Cannot apply stockspl. SPL 2.00.cmon still remains. I guess that is the problem, but I don't know how to revert to SPL 1.26. I tried everything, but 2.00.cmon is still there .
Thank you anyway.

Tools to dump ROM
Sorry if I am posting in the wrong thread, but are there any tools to backup the original SPL and ROM before we start flashing the cooked ROMS? As with this any unknown issues can be ruled out in case if we need to revert back to the stock ROM.
Thanks in advance.

Unable to Flash Roms with all versions of HSPL

hi,
a little fusrated here, Ive been trying to get my hd2 (originaly purchased from vodaphone in greece) to boot into windows.
i have tried flashing all diffrent ROMS with including, with HSPL installed (all versions from HSPL2):
from SD: original greek ROM from htc site, successful once but still no boot
usb: original WWE rom and UK vodaphone updated rom (1.77), also several cooked roms with radio version 2.08.50.05 and TASK29 flashed before attempting.
Even after several successful flashes from HTC offical ROM (which include radios if im not mistaken) the phone still doesnt boot, white htv screen or silver warning sign on black backround appear.
am i making a total noob mistake here, i have in my mind followed every combination of HSPL number, radio, HTC offical ROMS and even the HTC_ELL (greek rom) from SD. the only one i havent managed to find is the vodaphone GREEK rom from vodaphone.gr
any help at all would be excellent, its been a week of sleepless nights here, i really lossing hope.
this is hell! please help.

Have you tried flashing ur stock rom with use of a goldcard?
Else flash HSPL 1.42/1.66 and try this ROM: http://www.vbnfiles.com/xda/xmoo/Le...Radio_Signed_15.14.50.07U_2.02.50.21_Test.zip

hi, thanks for fast response. no i have not tried using the goldcard. i havent been able to figure that one out exactly where i download it
ok, im trying that rom now with hspl 1.66 xe

im at work now and think ive got XP usb driver issues from here (win7 from home works fine), although hspl flash works ROM flashing stays at 0%
any ideas about usb drivers? (active sync not installed)

302 error, got to 7%. do you think usb error.

djgknight said:
302 error, got to 7%. do you think usb error.
Click to expand...
Click to collapse
Is that the rom I gave you?
7/9% is most of the times CID Lock or the Radio.
Have you tried flashing stock rom trough SD-Card??

hi, yes have tried HTC stock ELL ROM through SD:
RUU_Leo_HTC_ELL_1.48.482.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
doesnt boot either.

djgknight said:
hi, yes have tried HTC stock ELL ROM through SD:
RUU_Leo_HTC_ELL_1.48.482.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
doesnt boot either.
Click to expand...
Click to collapse
Well urs has a Vodafone CID lock.
So flash the stock Vodafone ELL rom using sd-card, or flash HTC ELL using goldcard!

i though that there was no need to CID unlock if you have a version of HSPL on your device, i never even though of that.
I still cannot locate the the offical vodaphone ELL ROM (which i dont really want as it is in greek).
back to the start i suppose ?

Well ur bootloader seems to be corrupted. So we need to go back to the roots. And then start again, so that's why we need stock rom, or flash stock rom using goldcard!

xmoo said:
Well ur bootloader seems to be corrupted. So we need to go back to the roots. And then start again, so that's why we need stock rom, or flash stock rom using goldcard!
Click to expand...
Click to collapse
ahh, like the sound of that. it seems to make sense. ill do that now and get back to you. thanks muchly for the help btw.
/djgknight

xmoo said:
Have you tried flashing ur stock rom with use of a goldcard?
Else flash HSPL 1.42/1.66 and try this ROM: http://www.vbnfiles.com/xda/xmoo/Le...Radio_Signed_15.14.50.07U_2.02.50.21_Test.zip
Click to expand...
Click to collapse
i've had no luck with flashing the stock ROM with SD, none of the HSPL2 versions will load from SD anymore (just a double flash of the screen).
i did try now to flash the ROM you gave me today (above) and get that rom's splash screen "not for sale" appear but still no boot.
should i try a task29 again? what to do if wont even boot leoimg from SD ??