It's been 3 months since my last flash. I was tempted to flash udk's new r4 this evening. Then I found out that when I try to enter the bootloader screen or try to hard reset. The tricolor screen or the hard reset screen doesn't stay static. It keeps flickering. Hence I can't perform an upgrade or hard reset.
Does this occur to anyone else? Or is there a work around?
Thank you.
After you see the tri-colour screen when entering boot loader mode are you removing the stylus from the reset hole and keeping the camera button depressed?
Anyone solve this problem ??
Related
I hope sombody can possibly help...I've just recieved my Jamin in the mail, and tried to turn it on...but it seems to get stuck in a blue screen that has the i-mate logo, and the system info in the top left corner. I've tried several soft resets, and tried to hard reset to no avail.
Is there anyway to get around this? Or is my brand new toy already broken.
Thanks in advance for any suggestions or help.
When you said hard reset, do you mean you DID hard reset it but you still facing the same problem, or you are not able to perform hardreset at all?
I did a hard reset, and that put me at a screen with three color bars running across, Green, Red, and blue. At that point I was stuck again...had to soft reset to get ot of that screen.
Thanks!
get it to the blue/red/greem screen again and flash it to the latest Imate Rom.
I can get it to the tri color screen, but my PC won't recognize it, so I am unable to flash it with the latest ROM. Any suggestions?
Found the problem!!
I was hitting the wrong buttons for the hard reset. Hit the Comm mgr, camera, and soft reset buttons, then hit send when prompted. It returns to the boot screen, and after several minutes, will finally start up.
Thanks for the help!!
Hi,
Recently my pda(k-jam) fell from my pocket and it hanged. I did a soft reset but I get this error message "Press Send to restore factory defaults, Other keys to quit"
I tried all keys but in vain. I then did a hard reset by pressing the comm and the voice dial. (did a reset with my stylus). I still get the above error message.
Does anyone have any suggestion or idea how to reset my pda?
Thanks alot.....
Y dnt u flash it with a new Rom look around the forum for the new MOSKI ROM.
Thanks
Thank you for your suggestion, I will think of upgrading to molski.
But will it upgrade ? As a hard reset also doesnt seem to work and how do I get to reach the ROM if I am not able to see the other things?
Thanks
Please help...
Hi ,
I am a newbie and so would seek alot of help. Thanks in advance...
Couple of days back my pda fell and now after soft or hard reset the screen still shows this "press send to restore to factory defaults, other keys to quit"
I would like to upgrade to molski but they say I might have to downgrade my rom but I must first unlock the device. There are g3 or g4 device..how do I know what device my k-jam is...g3 or g4? How do I follow up or know?
Could anybody give me the link or solve my problem? As my k-jam just wont pass that screen..I tried looking into various topics but couldnt go about the first step I should be taking...
Please help!
Thanks
Hi,
Please help..after hard reset, it still does not happen to load into the factory defaults... I cant flash my ROM or anything ...as it wont progress further than that screen ... "Press Send to load factory defaults, or quit"
Anyone have any suggestion?
Hold down the camera button while resetting it. If you can get it to the bootloader (three color screen), you might be able to flash it with something and possibly rescue it. It does, however, sound like you might be screwed. Things break when you drop them, including plastic phones.
hi
Thanks but if I have to do a hard reset, I would already be holding the comm manager and the voice dial with the stylus to reset. Do I hold all the 3 buttons together while hard resetting ?
I have tried all the buttons after doing the hard reset but just doesnt get to the other screen.
Thanks for your help.
Hold down the camera button, Power Button and Pin in the hole. First relese the hole, then release the power button and keep holding the Camera button dis will bring the Tri-colour screen. There'll be some info. like IPL n SPL der
If IPL n SPL are like:
IPL 2.xx.xxxx or 1.xx.xxxx
SPL 2.xx.xxx or 1.xx.xxxx then ur device is G4.
if its like:
IPL 2.xx or 1.xx
SPL 2.xx or 1.xx then ur device is G3
if its G4 you need to CID Unlock that before upgrading it.
All the LUCK. Go Ahead.
Hi
Thanks,
I tried your steps but it still wouldnt work. But somehow I did the switch below the comm button and it showed me the screen to the somethign HTC innovation or like that.
I think I had to tinker with the switch below the button to get the screen working.Thanks for your help.
i was loading the Touch-IT v2.3 beta for wing rom when i got an error and my phone froze up and would not connect to the pc so i soft reset it and now my tmobile screen freezes on load if anyone could help me it would be great.
I got the bootloader runing but i just wanted to see should i try installing the rom again or reload the original 1
Try to install official Tmo RUU
Try pressing and hold camera and then press into the soft reset hole if its the wing and then try and run the hard spl...if that doesnt work then im clueless....hope i helped...
k thanks i got it now
i ve got the same problem.. how di you fix your??s
Try a hard reset push the soft reset button on the side and hold both of the soft keys keep holding the soft keys until a black screen comes up with white lettering. than press the call button hoped that helped
Sorry quick thread hijack.. im reading here and getting ready to unlock/flash my girlfriend's tmobile wing and was wondering.. if you brick your phone, does a hard reset always return your phone to working, OEM condition? or is it possible that you could permanently damage it beyond hard resetting repair?
Thanks!
you can brick your phone beyond repair, but its actually rather hard to do so. Most people THINK they've bricked their phones, but they actually haven't. Just HardSPL the phone, and it will be virtually unbrickable.
Hard reset essentially reflashes your rom over your current installation. it wont return it to the original rom that came with the phone, but i will reset everything.
thanks! i'll remember that.
I just got a Prophet which was flashed to a WM6.1 ROM. I did a hard reset but now I get to the start screen where I am supposed to unlock it, but the touchscreen doesn't seem to work. I press the Left soft button to do the unlock process, but when I tap the unlock button that comes up nothing happens, as if the touchscreen is not working.
Touchscreen is confirmed to be alive before the hardreset, any ideas what happened? I don't even know why it's locked on startup usually you do the configuration stuff after a hard reset (Must be the ROM that's on it)
I am thinking I will have to flash a new ROM but if there is a way to fix it without reflashing that would be better.
Nevermind guys, I don't know what went wrong but a quick re-flash fixed it.
Just loaded another keyboard cab and suddenly on soft reset/reboot the phone has frozen at the HTC logo and the screen showing the RGD info... won't reboot easily and takes many attempts to get back to this screen.. but will go no further.
So to do a search, what keywords should I be using or does anyone recognise this and have an answer.. have tried reset, battery out but nothing is working, the screen is just locked the screen mention above.
Using Laurentius26 GoldEdition V2.1 rom and was loading Touch-Keypad.Cab..
It is not connecting to the pc, so I can't reflash it at this time..
if you're phone wont boot since you installed this then looks like a hard reset is on the way mate sorry, you could try boot without mem card but doubt that will make a difference
Could you quickly remind me of the sequence for hard reset, red reset button doesn't seem to do a lot and I do have everything backed up so its not a problem... cheers.
press and hold both volume buttons and tap the power button. Keeping holding both volume buttons until it asks you if you want to factory reset the device. When it does tap volume up and it will then go off and do it's thing.
if the crash was the first time you had soft reset since youi installed the cooked rom, (even if you had been using it a while) it could be a mismatched radio. (Sometimes the rom/radio mismatch doesnt show till the first restart.)
Look at the R on the boot screen, if it has .51. in the version, then flash a new radio.
Thanks for all the help.. have managed to recover, restart and reflash, then reload, so we are all sweet now.. cheers..