Hello,
I've been searching the whole forum, but I cannot believe nobody is having the same problem (or idea) as I have:
BA is still great, but nowadays it's lack of 3G internet speed capability (no HSDPA or HSUPA, only gprs.. is becoming more and more quite a problem...
So I thought, wait, I'll connect my BA via bluetooth to another cell phone with 3G, HSDPA, etc. capabilities and basically connect to the internet through that phone, and have high speed internet!
However, I can't figure it out.
First I tried through DUN, but it turns out MS removed DUN from wm 6.1, and from what I can see, Internet sharing is not intended for this task. Or is it?
Can we have high speed internet on BA?
Thanks,
pooksee1802
I couldn't get it to work - but I have just got a 3G USB dongle which I hope will (with a connector cable) provide the old BA with 3G access..
I'm hoping I can configure the BA as if it were going through the USB activesync to the PC and so to the internet.
Anyone tried this yet??
hmm,
judging by the thread's view count it seems the issue is interesting, but unfortunately no answers...
c'mon guys, nobody interested in having high speed internet access on our BA's?
thank you!
in theory the scheme is simple but useless
you need laptop, 3g dongle connected to it and then BA connected to the laptop via cable (bluetooth is slow)and activesync, this is the only working way. This scheme is useless because if you carry the laptop why will do you need the BA?
there is no usb host on the BA so you can not connect the 3g usb dongle to it in any way, thats why you need the laptop
I am using BA with phone as Bluetooth modem towards HSPA network.
Actually, the initial purpose was to share one SIM card between phone and BA, which is more or less permanently installed in my car.
So far, the experience is good. I have 2Mbit HSDPA connection from Nokia E71 to my operator. Bluetooth link has a theoretical maximum speed of 1Mbit/s. In reality this is even slower, but way higher than you can get from EDGE Class 10.
The only problem is that THERE IS NO ROMs released lately, which support Bluetooth dialup. That's it.
ROMs I could get to work with phone as Bluetooth modem are WM5 ROMS and WM6 - "BA ROM CE OS 5.2.19199 (Build 19199.1.0.0 PV DVH) 16MB PP (04)" (using it now).
All later builds do not even try to connect to BT DUN on phone and immediately show "Unable to dial *99#" prompt. No idea what they did to cripple BT DUN in WM 6.1 on BA.
the old dialup was dumped in all later ba rom builds but if it is required so much i can add it in a later build of my roms
Well, I would very appreciate it, really.
Stpark - that's exactly what I was trying to do!
Regarding BA's bluetooth speed, I was aware that it's bt is only ver. 1.1, that is quite slow, but I assumed it would nonetheless still be faster than ordinary gprs. Thanks again for the confirmation.
Stpark, by the way, searching for the "missing bluetooth DUN" I came across a WM developers blog, (http://blogs.msdn.com/windowsmobile/archive/2007/04/17/why-did-we-remove-bluetooth-dun.aspx) who said that actually they didn't remove it from the ROMs completely, they just put it as an option, but due to user's demand they will return it to the standard package in WM 6.5.
Xplode, thank you for all the roms so far, and I would also appreciate very very much a rom with the DUN included, and I think many of us would as well... Thank you...
To be exactly precise on DUN... There is DUN and there is another DUN.
There is model where your BA acts as DUN host (i.e. you dial from PC using your handheld as modem).
And there is model where your BA acts as DUN client (i.e. you dial from BA using you whetever mobile phone as modem).
So far we are talking about second model, whereas Microsoft is dropping DUN for first. It means that BA as modem role is being replaced by BT PAN. I am not aware about Microsoft being dropped DUN client role in Windows Mobile.
It seem to be just an issue with composition of latest BA ROMs.
That's right, we need the "second" option, that is when the BA acts as a client connecting to a host mobile phone with 3g internet connection.
Be it as it may, because I don't know if MS did drop DUN altogether, or just the first, host mode operation, we need the second one. I'd say badly.
Now I'm hoping for a ROM with DUN in it... (xplode..xplode..
ps. I'm writing this on my BA connected to the net through gprs, speed: 5 kb/s, just like dialup, happytime...
Well i am working on 20931 rom and may publish it these days, but i still have some issues with it when i solve them i will publish it
Well i am working on 20931 rom and may publish it these days, but i still have some issues with it (due to proper translation from chinese) when i solve them i will publish it
Related
Ok. Please don't tell me to search. I have. If you have found the magic cure, then can you possible and nicely show me there this thread is?
PROBLEM:
No internet access for Laptop on 1.5 hour train trip.
However, TMOBILE XDA phone has good GPRS signal.
REQUIREMENT:
Share GPRS internet connection coming through XDA with laptop.
SOLUTION (?) :
None found. Might test this one : http://216.239.41.104/search?q=cach...aptop-howto.pdf+gprs+laptop+ir&hl=en&ie=UTF-8
Alt Link to above: http://tomt.ath.cx/attachments/gprs-turkcell-laptop-howto.pdf
--------------------------
I understand boot mode (wallaby) where it can be used as traditional cellular modem. That's limited to speed problems, and I don't wish to pursue that.
I also found a link in Microsoft newsgroup (recaptured in google groups), but I need to track those individuals down:
http://groups.google.com/[email protected]&rnum=1
Thanks, hope we all can figure this out.
With wm2003 4.00.33 German there is the "Wireless Modem" application built in which works with my MDA. I don't know if that application also works with an english ROM. Maybe there is a ROM-Update out there and the wireless modem is included.
Fidl
Thanks. I just checked both PROGS and CONNECTIONS, no such thing.
New to my ENG 4.05.00 is GPRS AUTHENTICATION in the connections/networking seciton, but nothing else.
wize_1 said:
Thanks. I just checked both PROGS and CONNECTIONS, no such thing.
Click to expand...
Click to collapse
I know that the wireless modem is NOT included with your 4.00.05 ROM. It was included in the 3.17.03 ENG ROM from O2.
Maybe you give a try to the wmodem.exe i extracted from my german ROM.....
Good Luck!
Fidl
Great!!! I'll try tonight installing that and will let everyone know.
One question, however. From reading other threads (I finally found some), I noticed that the laptop should be running XP.
I guess the question really is, what are the step-by-step instructions to complete the configuration and get the laptop on the internet. I would think that they were:
(1) Getting the phone to have WMODEM [complete]
(2) Powering the phone up, and running WMODEM app [complete]
(3) Powering up the laptop, and then discovering a device [unknown]
(4) Creating a new DUN (dial up networking) connection on the laptop and using the mystery modem device just discovered [unknown]
(5) Configuring SOME NUMBER to dial as the connection parameters [unknown]
(6) Connecting
I would think that the phone would accept the incoming 'request' for it to act as a wireless modem, and initiate a gprs connection, and then do some sort of NAT.
Does ANYONE have ANY more information on how this might work?
Is XP required?
GPRS Settings
You need a Serial Cable or an Irda COM Port available. XP is not required. I do Irda on W2k (it also works with XP)
Check this link for Instructions and the Irda-Driver:
http://www.myxda.com/html/HowToUse/XdaII/How to setup Wireless Modem for IrDA.htm
The important thing is to install a Standard Modem over some COM port and use Advanced Settings for your AccessPoint i.e
AT+CGDCONT=1,"IP","web.one.at","",0,0
You then dial "*99#" (without the quotes)
Fidl
I gave up and bought an aircard!
:lol:
Where do we stand on the best solutions?
I have the same problem except I am also interested in getting the XDA to act as a wireless modem for circuit-switched data calls (7Kbps pipe).
I first saw the most pertinent information at http://www.xda-developers.com/modem/ but the page is labeled "superseded". As I understand, as soon as we get ROM 3.16.43 or above, all the "intrusive" trick posted on the page originally is obsolete.
My first question is about the "intrusive" trick there. It sure looks like the trick will get the XDA to act as a wireless modem for your laptop to make circuit-switched data calls (consuming minutes, 7Kbps only). Does it get the laptop to make GPRS connection (45Kbps) as well, assuming I subscribe to T-Mobile's data plan ($20/mo, unlimited data under promotion)?
My second question is, once we get a ROM version that gives a "wireless modem" program, can I make both types of data calls? Sounds like yes for the answer.
If so, great. Let's assume so. T-Mobile US is at ROM 3.14.40 ENG right now. In a matter of a month or two, they are going to post the upgrade for Windows Pocket PC 2003. A tier 2 tech guy told me that it will probably come with a ROM upgrade. I feel that the chances are high that that ROM version provides this "wireless modem" program. If so, isn't it true that the upgrade basically converts our XDA's into a Sierra Wireless AirCard 750, and then some? Or I am off track somewhere?
The tech support told me that the AirCard 750 approach calls for a SIM card for the air card. You would have to either open a new line for a new SIM card, quite costly, or eject the SIM card from your PPC and place it into the air card each time you use it, quite a hassle. Hardware capability wise, XDA is just an AirCard 750, and then some. It's rediculous that it was not made as such to begin with. Maybe it was just a matter of development phases to roll out functionalities gradually and we are getting there?
Hello! I´ve got only one problem left with the xda II
Does anybody know how it ist possible to get the shown data from the XDA2´s IE on the screen of a notebook? I have a wsp flatrate and want to read the text on a bigger screen......... ist that possible? does anybody have experience with this topic?
Re: Hello! I´ve got only one problem left with the xda II
alamor said:
Does anybody know how it ist possible to get the shown data from the XDA2´s IE on the screen of a notebook? I have a wsp flatrate and want to read the text on a bigger screen......... ist that possible? does anybody have experience with this topic?
Click to expand...
Click to collapse
Well, there is this remote display application at YORCH.NET
"Remote Display Control for Pocket PC
With the Remote Display Control application, you can display actions on a Pocket PC, including user input, remotely on the display of a desktop or laptop personal computer. This is a great tool for demonstrating the power of the Pocket PC to a large audience. It also allows developers to test their applications for the Pocket PC on a larger screen.
size: 712KB"
I didn't try it yet, it sounds quite interesting for multiple purposes.
According to the big Wizard thread on HoFo, the lack of BT as an option in Modem Link is MS design intent, but instructions for adding BT to Modem Link are in the i-mate document ‘Guidelines for using i-mate K-JAM as a Bluetooth Modem.PDF.
Does anyone have this doc, or does anyone know how to turn the K-Jam into a BT modem?
Thanks in advance...
Dox.
The document your talking about is here:
http://www.clubimate.com/support/KJ...r_using_i-mate_K-JAM_as_a_Bluetooth_Modem.pdf
but I haven't been able to get it working with my K-JAM and laptop using the MS Bluetooth stack. I keep getting the "error 692: There was a hardware failure in the modem". I've followed all the setups successfully but cannot connect. I can even query the modem from the laptop ?! Help anyone ?
Doh! Thanks firas... I was expecting some reg hack to enable it in modem-link, but all the doc says is 'use the DUN profile in the MS BT stack... I should have guessed... :$
I tried it, paired the wizard with my iPAQ 4700, set it as the BT modem and bingo logged into Skype (as a test) from the 4700 with no problem. 4700 has no GPRS (and wifi turned off), old nokia has no SIM in, so it had to be through the wizard, but the 'G' icon didn't chage to the connected one even though the connection worked. I've yet to instal SPB GPRS monitor, but will do and see if it logs the traffic.
Can your laptop connect to a regular (Nokia/SE) BT phone's DUN profile?
Dox
Hey Dox, I've finally managed to establish an EDGE connection over bluetooth with my laptop. Just wanted to let you know regarding SPB GPRS Monitor to be careful with it. After I installed it my KJAM's backlight would always be off even after a restart. Only way I could fix it was to hard reset and reinstall everything except for that one. You might wanna check around to see how others have faired with it before installing it yourself.
SPB GPRS Monitor
Hi firas,
Glad you have it working buddy. I gave up on the BT dongle on my laptop (even with widcom drivers instead of the 3com supplied ones) long before I got the Wizards...
Thanks for the heads-up re gprs monitor too. As it happens, I had already installed it on my own Wizard as my Voda 'data' bundle covers gprs,MMS and SMS from the same pool, and I wanted to see how many 'SMS' worth of data I was using. I haven't had the backlight problem you mentioned, but will be wary.
When I installed it from the O2 companion CD, it installed okay, but (I guess because of the Active rubbish) there's no Today plugin with that version. I turn the titlebar icon off, as its implementation is clumsy, and used the today plugin to monitor, and as access to the reports. Might try an SPB update over the top...
Anyway, reconnected from my 4700 surfed for a bit fine, and still no sign of the Today 'G' icon showing connected and no traffic in GPRS Monitor. Guess it's back to my old registered version on the iPaq end of the link...
Thanys again for the tips and warnings firas...
Catcha later
Dox
Glad to be of any help Dox. I've also had the same problem with the G icon not changing colors to show that it's connected when using the GPRS (EDGE) connection on the KJAM from my laptop (although I can surf the Internet just fine). So I guess we can just add that to the ever growing list of bugs in the KJAM (or WM5) :x
Hi Firas, I want to ask you. Is your service provider MTC or Wataniya? and what about the downloading speed using dun profile is it slow or fast?
Hi ysq2002. I'm currently using Wataniya and I'm getting download speeds between 128 - 170 Kbps ( 16 - 21 KBps) using DUN on my KJAM which is great for Kuwait. I've tested it in Kuwait City, Surra (not south Surra), Sulaibikhat (Maternity Hospital) and even Kabd (Chabd) and have gotten the above mentioned speeds. I used to have MTC for several years and I tested my MTC phone line beside my Wataniya phone line recently in Chabd and was only getting 20 - 32 Kbps ( 2.5 KBps - 4 KBps ) on my MTC phone !!
Yes firas.Yesterday, I bought kjam. The internet speed was very good using Edge. Much, much better than PDA2k which has no support for edge
firas said:
Hey Dox, I've finally managed to establish an EDGE connection over bluetooth with my laptop. Just wanted to let you know regarding SPB GPRS Monitor to be careful with it. After I installed it my KJAM's backlight would always be off even after a restart. Only way I could fix it was to hard reset and reinstall everything except for that one. You might wanna check around to see how others have faired with it before installing it yourself.
Click to expand...
Click to collapse
Hi Firas,could you please tell me how did you make the KJAM bluetooth to work as a modem and the laptop can connect to it?when i tried to dial from my lapotp,i got error 692 hardware error,can you help?thanks a million.
anyone can help?
To be honest with you I don't know what I did differently that finally got it working. I followed the instructions in the above mentioned PDF at least 10 times and it finally worked ?! Try going to device manager on your computer, uninstall any Bluetooth Modems. Go to the Bluetooth settings and remove any pairing between your laptop and your phone and start all over again. Take it step by step according to Club Imate's document.
Sorry I can't be of anymore help.
EDGE !!
His Firas;
I've read some threads about EDGE in the forums; but i swear i can't get an exact and easy-to-understand meaning of EDGE !!! all what i got is that it's 3 or 4 times faster than GPRS connection !! what is EDGE, plz don't give me high-tech definition ?? and tell me, if you connect to the internet on your wizard using EDGE, how do you know the exact speed (considering that the laptop doesn't exist) ?? thanx in advance buddy ..
EDGE is also known as EGPRS (Enhanced GPRS) and can theoritically reach speeds of 384 kbit/s. It is an upgrade to current GPRS networks and is much faster than regular GPRS which operates at 30–70 kbit/s. So if your mobile telephone company provides EDGE (EGPRS) and your phone supports EDGE it will run at EDGE speeds (usually up to 230 Kbps). If your phone only supports GPRS it will still work with an EGPRS network but will run at a slower speed (usually around 40 - 50 kbps). EDGE is available in some parts of the US, Europe, and Middle East (not sure about Asia). Do not confuse it with UMTS which is a very different technology and is built on different networks and offers even faster speeds.
Here are a few web sites that offer free speed tests:
http://www.dslreports.com/mspeed
http://www.speakeasy.net/speedtest/
http://www.bandwidthplace.com/speedtest/
well, thank you so much, i got the clear idea now and thanx again for the websites
7ayyaak Allaah Glad I could help !
Hi, I just bought a MDA Vario and downloaded the software to sim-unlock it. I've been using it on Vodafone for a few days and have some problems:
Wi-Fi:
I can turn wireless on, but when I then go to IE to start surfing, it tries to connect using GPRS instead of Wi-Fi. How do I get it to use Wi-Fi instead?
Bluetooth:
I can Sync my device to my PC using Active Sync 4.1 over USB, but when trying to do this over bluetooth, I keep getting told that the device can't find a an existing Bluetooth partnership, even though I've set one up (several times)! What could I be doing wrong?
ROMS:
I've got the T-Mobile ROM on my phone, but I'd rather have a standard (non-network specific) ROM. Where can I download such a ROM? Would ther ebe any issues in overwriting the T-Mobile ROM with a Standard one? Which ROM is the "best"?
Regards,
Nirbho
Nirbho said:
Hi, I just bought a MDA Vario and downloaded the software to sim-unlock it. I've been using it on Vodafone for a few days and have some problems:
Wi-Fi:
I can turn wireless on, but when I then go to IE to start surfing, it tries to connect using GPRS instead of Wi-Fi. How do I get it to use Wi-Fi instead?
Click to expand...
Click to collapse
If WiFi is on and connected successfully to the network, it should use WiFi. I sometimes find if I wander about, and the phone loses site of my Access Point without me noticing, the next time I request a webpage it will fire up GPRS. You say you're connected, but it sounds like the Vario doesn't think so. Are you sure you've got WEP/WPA keys correct, and that the Wireless AP isn't using MAC filtering? Have you been able to get onto the net with IE at all, or has it always tried to get out over GPRS instead?
Nirbho said:
Bluetooth:
I can Sync my device to my PC using Active Sync 4.1 over USB, but when trying to do this over bluetooth, I keep getting told that the device can't find a an existing Bluetooth partnership, even though I've set one up (several times)! What could I be doing wrong?
Click to expand...
Click to collapse
When you pair the Vario with the PC, both ends will offer a list of Bluetooth profiles they support. When I tried with my laptop and a 3com BT dongle, despite it working fine with my old iPAQ, the Wizard didn't seem to think that the laptop offered the ActiveSync service (or maybe the laptop didn't think the phone did, I can't remember for sure). You need to make sure that the Vario (if that's the "device" that's complaining) believes the PC is offering ActiveSync as a Bluetooth service, or it will assume it's only paired with other phones, GPS's, headsets etc, but nothing with which it could activesync.
Nirbho said:
ROMS:
I've got the T-Mobile ROM on my phone, but I'd rather have a standard (non-network specific) ROM. Where can I download such a ROM? Would ther ebe any issues in overwriting the T-Mobile ROM with a Standard one? Which ROM is the "best"?
Click to expand...
Click to collapse
The ftp site here hosts a load of ROM's. I don't know of any that are noticeably better all around than any others. I have a Qtek phone, and although the later ROM fixes the BT voice-dial wake-up problem it also breaks, MMS and some bits of WiFi for some people. Others have installed the WWE version of a ROM and found that the keyboard doesn't match their hardware layout and some keys are wrong. They've then gone and broken button mappings trying to fix the keyboard problem. I know T-Mobile are the least subtle in their customisation, and many people seem to want to get rid of the pink look. I don't believe there is a clear winner in the ROM stakes. I've seen a few sigs that suggest people are starting to cook their own ROM with the GSM stack from one, the WiFi from another or whatever combination suits them. If you're up for doing the same, be my guest, but you may, unless you're experienced, find yourself worse off than you are now.
Have a look over in the "upgrading" forum and see what people seem to be using there. Be aware though, a lot of the "old timers" will be using I-Mate or Qtek devices which hit the streets before the O2 and T-Mobile variants, so they have had less device specific customisation done and were probabaly running a generic WWE (or localised) version anyway.
Hope that helps?
Dox.
Hi,
Is there a way to get Spb GPRS monitor to work with the wireless modem. If I connect my PC to the Internet through the wireless modem the GPRS monitor doesn't see it as a live connection and therefore doesn't log the traffic.
I was wanting the same thing so I emailed SPB directly about this and they said that this is not supported in the current version. Implying that it might be in future releases and I've asked them if this is true but they've not yet responded (was less than a week ago).
However, there are bandwidth monitors available for your PC. I have one that is free and can be set up to only monitor dial up connections. It's called NetMeter by ReadError and works fine in Vista.
new wireless modem in aku 33 - maybe the old works also???!
Hi, there...
with the new aku 3.3 (test rom) theres an new wireless modem utility inside...
on one hand thats good... on other not so good...
the good side is that it now supports bluetooth...
on other side its not longer an "modem" as it is now... its a LAN-Device thats shared the internet connectivity from the phone with the pc, like an router with inet access!!!
the good thing is that the gprs monitor just looks to the connection... since it is the normal phone mobile internet access...
the bad thin is that it no longer gives you the option trough IR Beam...
but maybe if someone can send ,or put it here online, the old hermes ´wireless modem tool it works also with the aku33???
just search in windows folder for exe and post it here... thanks
steve
^that also means no driver installation in OS of PC is any longer necassry ... ... its one of the good thins..
Two phones--HP IPAQ 910 (runs WM 6.1 Professional), and a Sony Ericsson TM506 (dumbphone). I could use either, with my T-Mobile (USA) SIM card. However, although the IPAQ has 3G, that will not work on T-Mobile, which uses a different band for 3G.
The TM506 works very well as a 3G modem for my laptops, giving me a fast Internet connection on the go, when there is no available wi-fi connection. It also works well as a phone. Of course, it has much elss PDA capability than the IPAQ, much worse keyboard for text input (just a normal phone keypad), and much smaller screen.
Therefore, two phones, one SIM card, the following looks like the best solution to me--leave the SIM in the TM506, and use that as a phone. (If the battery runs out, the IPAQ could be used as a backup phone.) Also use the TM506 as a 3G modem, both for laptops, and for the IPAQ.
Use the IPAQ as a PDA, and as a small internet device, connected via wi-fi or tethered through the Tm506.
The problem is--although tethering from a laptop to the TM506 works fine, I cannot get the IPAQ to tether through it. I set up the BT pairing, I choose the DUN service, I successfully set up a connection in the Connections tab, routed through the BT modem (TM506), using the same settings as on the laptop. Everything looks like it is set up correctly.
However, when I try to connect through that connection, I always get an error message very quickly, about "cannot connect for unknown reason".
I've tried so many things, over days now, and cannot get it to work. I've scoured the Internet looking for info, and found nothing that works for me.
Does anyone here have any suggestions? Has anyone here tethered with an IPAQ 910, or at least a WM 6.1 PPC, through a different phone? (I do not mean using the IPAQ or other WM 6.1 phone as a modem for a laptop--but the opposite--connecting to the Internet on the IPAQ 910 or other WM 6.1 phone, by BT tethering through another phone.)
Any suggestions?
Thanks in advance!
I tried today to tether an old PPC I have, the T-Mobile (USA) MDA (HTC Wizard, stock T-Mo AKU2 ROM, WM5) through the TM506, and it worked!
So, the problem is definitely not with the TM506, which works for tethering a laptop, and for tethering the Wizard.
The question is then--why won't the IPAQ 910 tether through it? It has all the right settings to tether (DUN) through another device, but it doesn't work. I'm wondering if I have a defective unit, or whether it is a problem with the whole model, or even of WM 6.1.
Has anyone here successfully tethered a WM 6.1 phone through another phone? Has anyone done so using an IPAQ 910?
Anyone here curious to try, and see if it works with your phone?
Could it be a problem with the Bluetooth stack? Do all WM 6.1 phones now have the MS stack, or do some have Widcomm? If there is a problem with outgoing BT DUN on the MS stack, is it possible to install the Widcomm stack? Or would that create other BT problems?
Any suggestions would be appreciated. Thank you in advance.
I looked at the BT specs, from systeminfo, on the 910. This doesn't mean anything to me, but I'll post it here, in case it means something to someone:
-----------------------------------------------
Firmware Version A05U
Hardware Revision: BlueCore4ROM
Driver Version: BCHS_WINCE_MOBILE_4_7_3
Software Version: BCHS_WINCE_MOBILE_4_7_3
-------------------------------------------------
Does that mean anything to anyone reading?
Interesting--no mention of Microsoft or Broadcomm-Widcomm in any of that. (Unless the BC at the beginning of driver and software version stands for Broadcom).
I still have not found anything in Internet searches. Although I am not very knowledgeable about the WM registry, I decided to look a little there, and see if I find anything.
I see a registry key, that to me seems like it would govern outbound BT DUN from the phone:
HKLM\EXTModems\bluetooth_dun\
(Being that this is under external modems, I assume this key has to do with the outbound DUN I was discussing-dialing with the PPC to the internet, through another phone.)
Underneath it there are three values:
string value: FriendlyName=Bluetooth
string value: port=COM5
Dword: DeviceType=7
I am wondering whether--perhaps altering the second or third value, could get this to work?
Anyone know what the third one means-DeviceType=7?
With the second value, could it perhaps not be working, in that that is the incorrect com port? How would I find out what is the correct com port for this?
IN setting up the pairing between the IPAQ 910 and the SE TM506 (initiated from the IPAQ), in the choice of services, besides the dial-up-networking service, I believe there was the serial port profile, where one could set up a particular com port. There was no mention of that being necessary for setting up DUN, so I just chose the latter. However, should I re-pair, and also choose the serial port profile, and set up a com5?
Any other ideas?
Thank you.
Edit--I forgot to mention, under ExtModems, besides the key bluetooth_dun, there is also a key called bluetooth_dcn. What in the world is bt dcn?
I came upon a post on Modaco from 2005, regarding tethering a WM phone through another phone, at:
http://www.modaco.com/content/blue-angel-blueangel-modaco-com/202751/bluetooth-dun-profile/
I think much of it is not applicable to my situation, as two very different phones, different version of WM, etc.
However, I found the following quote from it interesting:
---------------
"BTW - You can't go into Settings...Connections to set up your connection. For some reason it doesn't work. Don't ask me why. I have to use the Bluetooth Manager to connect."
---------------
Well, as described, it also doesn't work for me to connect, through Settings-Connections-Connections. However, on my IPAQ 910, WM6.1, there is no other way to connect.
The author of the post quoted above says he can connect through "Bluetooth Manager". Well, I have no applet, either in Programs or Settings, called "Bluetooth Manager". There are of course Bluetooth settings, under Settings, Connections-Bluetooth. One can set up the pairing there, but there is no way to initiate a connection from there. One has to go into the Connections-Settings-Settings screen to set up the actual connection, and try to connect. I still cannot get that to work. (And now I have tried adding a BT serial port with the same com number as the registry key, as described above. Still did not work.)
I'm wondering--if there is some way I could get the app "Bluetooth Manager", would it install and work on my IPAQ 910? Where could I get that applet? Or is that app for the other BT stack?
3G modem with TM506
No answers about connecting the ipaq with the tm506 but I was curious as to how you used the tm506 as a 3G modem? I can connect with my laptop using the GPRS network but not the 3G. I downloaded the PC software from ericsson website and everything loaded and functions smoothly but it will not connect to the 3G network. The software setup a modem connection that dials *99***5# and a long unknown password entry. Any idea of how to get this to work?
mjw54 said:
No answers about connecting the ipaq with the tm506 but I was curious as to how you used the tm506 as a 3G modem? I can connect with my laptop using the GPRS network but not the 3G. I downloaded the PC software from ericsson website and everything loaded and functions smoothly but it will not connect to the 3G network. The software setup a modem connection that dials *99***5# and a long unknown password entry. Any idea of how to get this to work?
Click to expand...
Click to collapse
Sorry for the late reply, but I have not looked here for a while.
I found it to work also using that SE software. That sets up the connections on the computer, so they can also be used without the SE software running.
Nothing special necessary to use 3G. But of course, T-Mo 3G is not spread throughout the country. Of course if you do not get a T-Mo 3g signal where you live, you cannot tether 3G. Do you get a 3G signal with the phone by itself?