Database Users

Editing setup.dll

Hey,
Is there anyway to edit a setup.dll. I need to remove the EULA prompt from the attached dll so that I can run an unattended setup.
My problem is that I used the welcome.not file to skip screen alignment, but I have a cab that enters the alignment info. The only problem is that the alignment doesn't register until a reboot. Therefore, I cannot accept the EULA.
If anyone knows of anyway to edit it, or can edit it, it would be a great help.

try this program... might help.....
http://www.users.on.net/johnson/resourcehacker/
here is a modified one... not sure if it will work.......... give it a try and let me know

PapaDocta said:
try this program... might help.....
http://www.users.on.net/johnson/resourcehacker/
here is a modified one... not sure if it will work.......... give it a try and let me know
Click to expand...
Click to collapse
Hey,
I actually tried that. It doesn't work. Setup just fails.
Thanks though

"Not digitally signed wuth trusted certificate"

Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.

try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB

l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.

baudy2 said:
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.
Click to expand...
Click to collapse
ok try this one then, again transfer to phone and run it. then try the unsigned files.

l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Did not help either. Still the same message....

sorry, i havent come accross anything else at the moment. if i do i will post.

l6cum said:
sorry, i havent come accross anything else at the moment. if i do i will post.
Click to expand...
Click to collapse
Thanx anyway !

If you tried the Disable Security CAB file and you're still getting that message, it's a possibility that the file was actually modified. In that particular case, you have to have the device re-signed... search for signcode here...

Disable Security CAB file unavailable
Hi, it would seem that beyondthetech has made an arrangement with his hosting company that prevents him from hosting cab files to reduce his traffic burden. Does any one have a copy of the disable security cab file as all links point to beyondthetech and no files are available from there currently
Thanks in advance

the file is on my post above and still downloads without any problems!

do you have something like this for the s620?
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Im trying to use old dictionary (16 bit American Heritage) but says access denied not digitally signed.
Sorry I found this thread with search

l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
Mate, can't download the file

How do you run this file?
Sorry
I am new with treo 750 and does not know how to run it. I have tried other programs and they have all failed to install.
Please help

Thanks
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
This works on my Orange Branded HTC Touch

Not digitally signed wuth trusted certificate
thnx 4 the cab. I got same prob few days back. I just adjust the properties for cab file on my PC, clear 'unblock', transfer file again to my pda n things work. but i'm not sure of thats..maybe this cab can make work more easy n i'll try soon.
thnx bro.

l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
I Can't download the file. Can someone please help me?

Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170

baudy2 said:
Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.
Click to expand...
Click to collapse
I can't help you with your particular enquiry, but I have exactly the same device history as per your signature - give or take a couple of Symbian devices along the way. I am on the HD2 at the moment. Still love the jasjar though - terrified of the day when the battery dies on me.
rjstep3

fix!!!!!!
ok go to settings (back all your stuff up) security and factory reset ok then install the disable security signed thing and your done

SlavKor said:
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
Click to expand...
Click to collapse
Unfortunately it did not solve the problem: Security Configuration Manager tries to install Tool.cab on my HD2, but without any success, "Not signed application, instalation was unsuccessful"
Does anybody have solytion, how can I manually edit the registry???
"mobile registry editor" when I try to change registry key returns with error "Not Allowed"
Please e-mail: MOD EDIT: REMOVED EMAIL

Help with trusted certificates on WM5?

Could someone please help?
I have an XDA Exec (HTC UNIVERSAL) Ive been searching for days to a solution for this without avail and you guys seem to know what your talking about! Im very new to this and need a solution to this error when i try to install some applications and run them:
" X cannot be opened. Either it is not
signed with a trusted certificate, or one of its components cannot be
found "
Is there any way you can disable this in WM5? my WM5 version is OS 5.1.1700 (Build 14354.0.1.1)
Or is there any way whatsoever you can get around this? please if anyone can help do let me know and post!!
Thankyou !!

Is your phone locked ?
It may be locked or your operator prevent installing all of 3d party applications. In this case reinstalling "clean" WM5 may help (I'm not sure though) - I'm only a newbie in WM5.
Another reason that application you run trying access trusted functions - like allocation of the physical memory. In this case I'm not sure what can be done - reinstallation of WM5 will not help.

Its unlocked! so if i re-install wm5 it wont say this when i install programs? i have tried resetting the phone and installing different roms but nothing works! is there any particular rom i should be looking to install? or anything i can put in the extended rom to install after a hard reset to sort this out? PLZ HELP!

I have had that problem, too and I was going crazy. Then I tried the following tweak but I do not really know why it should work, it just did:
in HKLM\System\ObjectStore is a reg key "RegistryType=1", which means Hive based registry.
When you set it to "RegistryType=0", which means FILE based registry, all changes you do in the registry will stay there also if you reboot with device's reset button...
BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON.
Subsequent reboots can be done with reset button then. :lol:
there is another tweak that gets rid of the warning messages, but I did not use that one

really! which software could i use to reboot the phone??

also is resco registry okay to view and change this? it says registry type 0x0 (1) i have now changed it to 0x0 (0) is this correct? i performed a soft reset but im stil getting the error message! is this because i need to use software to reboot?

yep, the first soft reboot needs to be done with software. After that you can use the usual way again.
After I had done this I removed all "problem apps" and then reinstalled them and it worked.

What software did you use or could i use to reboot my ppc chuckchuck?

How do you make registry changes take effect without a soft reset

I am trying to change some registry settings to do things such as 'adjust volume settings' 'adjust backlight settings' 'turn bluetooth on and off' etc etc.
I want to use mort script to make the changes but so far I haven't figured out how to make the changes take effect without a soft reset, even when making the changes with a registry editor.
Does anyone know how to do this so that the changes take effect immediately?
Any help appreciated.

two things:
1st: all of the things you mentioned above should work without a reset. the best thing to do is change the reg value manully and if it works with out a reset then you know the problem is in the mort script
2nd: If you know how to edit xml files then download this cab and edit the xml file how you want. this should help some
http://www.megaupload.com/?d=RG6JZC33
this has a lot of apps in it you will be looking for the one that says tweaks

Thanks for the info irus,
Like I said, using a registry editor to change the settings does not take effect until I soft reset.
For example (and i'd appreciate it if someone could test this on their phone) changing the values in HKCU\ControlPanel\Volume...."Volume" and "Ringer" to 0 assuming it is not already set to silent does not actually turn the phone to silent until I soft reset.
Could someone please check this for me and report back.
BTW I'm using a Trinity (HTC P3600) with AX3L's LITE ROM.
Thanks in advance.

I tried it and it did not work, you sould try to edit the xml file in the program i told you about and try it there. when i get done with homework i will try it my self

Registry value is read by windows while loading. In case of desktop pc if you restart the explorer process the registry gets loaded. you need to find some way to load the registry again.

fuzzvirus said:
Registry value is read by windows while loading. In case of desktop pc if you restart the explorer process the registry gets loaded. you need to find some way to load the registry again.
Click to expand...
Click to collapse
Thanks fuzzvirus but that was my original question.
Does anyone know of a way to do this?

Bump......

I'm also interested in this theme. Does anyone know an answer?

What is deblogger please ?

Hello my friend,
I would like to know what is deblogger, and if it's better to stay the "OutputEnable"=dword:00000001 or to dword:00000000
Thanks a lot,
regards,
Nixeus

Me too interested in knowing about it. Any body please???

Just a debuglog. Almost useless, because there is no useful info inside (except manila.exe logs which may point you to bugs in lua scripts and so on).

Hello,
Thanks for your answer !
So it's safe to disable it ?
OutputEnable=0
?
Thanks

Of course. HTC's deblogger is useless, you can get log using any wince debugger.

I don't succeed to disable it grrrr
I have tried to delete the keys but, i don't function!

Nixeus said:
I don't succeed to disable it grrrr
I have tried to delete the keys but, i don't function!
Click to expand...
Click to collapse
I don't have such a key in my Shared Modules rgu at all. Strange that you can not delete it.

I have added a '-' before the key on an RGU.
In addition, i have converted ths rgu to a provxml.

The kernel will turn the options back to 1 automatically. I'd say leave it alone.. it doens't hurt anything...

thats what I experienced as well. Was wondering though...