Database Users

"Not digitally signed wuth trusted certificate"

Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.

try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB

l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.

baudy2 said:
l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
How to use it ? Run it once and then the cab which has problems ? Still the same result.
Click to expand...
Click to collapse
ok try this one then, again transfer to phone and run it. then try the unsigned files.

l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Did not help either. Still the same message....

sorry, i havent come accross anything else at the moment. if i do i will post.

l6cum said:
sorry, i havent come accross anything else at the moment. if i do i will post.
Click to expand...
Click to collapse
Thanx anyway !

If you tried the Disable Security CAB file and you're still getting that message, it's a possibility that the file was actually modified. In that particular case, you have to have the device re-signed... search for signcode here...

Disable Security CAB file unavailable
Hi, it would seem that beyondthetech has made an arrangement with his hosting company that prevents him from hosting cab files to reduce his traffic burden. Does any one have a copy of the disable security cab file as all links point to beyondthetech and no files are available from there currently
Thanks in advance

the file is on my post above and still downloads without any problems!

do you have something like this for the s620?
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
Im trying to use old dictionary (16 bit American Heritage) but says access denied not digitally signed.
Sorry I found this thread with search

l6cum said:
try this file
it will then disable the 'signed' part of the installation and should therefore not give you any errors.
http://www.beyondthetech.com/downloads/phone/Cert_SPCS.CAB
Click to expand...
Click to collapse
Mate, can't download the file

How do you run this file?
Sorry
I am new with treo 750 and does not know how to run it. I have tried other programs and they have all failed to install.
Please help

Thanks
l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
This works on my Orange Branded HTC Touch

Not digitally signed wuth trusted certificate
thnx 4 the cab. I got same prob few days back. I just adjust the properties for cab file on my PC, clear 'unblock', transfer file again to my pda n things work. but i'm not sure of thats..maybe this cab can make work more easy n i'll try soon.
thnx bro.

l6cum said:
ok try this one then, again transfer to phone and run it. then try the unsigned files.
Click to expand...
Click to collapse
I Can't download the file. Can someone please help me?

Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170

baudy2 said:
Hi all !
Tried to install the software and have this error message.
Is it possible to overcome this ?
Registry hack does not work.
Allow the unsigned app from installing for everything.
HKEY_LOCAL_MACHINE\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1 Do a soft reset.
baudy.
Click to expand...
Click to collapse
I can't help you with your particular enquiry, but I have exactly the same device history as per your signature - give or take a couple of Symbian devices along the way. I am on the HD2 at the moment. Still love the jasjar though - terrified of the day when the battery dies on me.
rjstep3

fix!!!!!!
ok go to settings (back all your stuff up) security and factory reset ok then install the disable security signed thing and your done

SlavKor said:
Please follow this link:
The problem is 100% solved with Security Configuration Manager
http://forum.xda-developers.com/showthread.php?t=404170
Click to expand...
Click to collapse
Unfortunately it did not solve the problem: Security Configuration Manager tries to install Tool.cab on my HD2, but without any success, "Not signed application, instalation was unsuccessful"
Does anybody have solytion, how can I manually edit the registry???
"mobile registry editor" when I try to change registry key returns with error "Not Allowed"
Please e-mail: MOD EDIT: REMOVED EMAIL

Picture viewer doesn't start up ???

Hi Everybody,
Today I have simply tried to have a look at my recent photo's but apparently the standard picture viewer doesn't start up. How can this be screwed up, it sits in the ROM, isn't it ? Maybe it has an INI or other config. file which is corrupted/missing ?? I was trying to search the forum for such a problem, but nothing found...
Please give me a hint if you can.

This is ONLY a hint because I have a Wizard...O2 XDA Mini S...and my Pics and Videos viewer stopped working. I eventually discovered it was because I'd installed the Eten dialer on my phone.
Don't know how this may help but hope it gives some clue.

iainmann,
Thanks for the hint but unfortunately it is not my case.. Other idea anyone ?

Good if you could list out the recent installed software

jarbi said:
Hi Everybody,
Today I have simply tried to have a look at my recent photo's but apparently the standard picture viewer doesn't start up. How can this be screwed up, it sits in the ROM, isn't it ? Maybe it has an INI or other config. file which is corrupted/missing ?? I was trying to search the forum for such a problem, but nothing found...
Please give me a hint if you can.
Click to expand...
Click to collapse
If youre tapping on the program icon and its not starting then try searching for the actual program (Normally in \windows), and try launching that way.
If youre tapping on a picture and its not starting then have a search on the web for some kind of file association program - perhaps the photo file extension has become dis-associated from the picture viewer.
Matt

jarbi said:
Thanks for the hint but unfortunately it is not my case.. Other idea anyone ?
Click to expand...
Click to collapse
Hard reset?
Start "Explorer", go to "/windows" and find "pimg" file. Try to start it. If it won't run, then you got virus (or bug

x-X-x said:
... then you got virus ...
Click to expand...
Click to collapse
Nonsence.

x-X-x said:
jarbi said:
Thanks for the hint but unfortunately it is not my case.. Other idea anyone ?
Click to expand...
Click to collapse
Hard reset?
Start "Explorer", go to "/windows" and find "pimg" file. Try to start it. If it won't run, then you got virus (or bug
Click to expand...
Click to collapse
first of all: thanks for all the replies, just to summarize what I did already:
1. I have tried to launch the "pimg.exe" directly - the same thing (nothing) happens.
2. Hard reset - no way ! The problem is not the kind where I would consider a hard reset. I have installed a free picture viewer for the time beeing.
3. I have the "jpg" files associated with "pimg" in Resco explorer, but it didn't make any difference.
If somebody would still come up with a new idea, I would really appreciate :? .

If the program won't start I would check that the program hasn't been overwritten. With Resco make sure that it has a tick in the "In ROM" box in Properties. If not, delete it and the ROM version will be restored.
With File Associations you have two registry keys for each filetype.
HKCR\.jpg - pointing the extension to the filetype and handler
HKCR\jpegimage - telling the OS which icon and program to use for the file.
Other entries exist too like HKCR\.jpeg, for the same file with different extension, and HKCR\jpegfile which is empty on my device.
The HKCR\jpegimage\Shell\Open\Command on mine is (Default) = pimage.exe "%1"
Is yours any different?
Resco has a built in viewer for images and other file types, which you can set as the default action when you click a file.
Hope this helps.

PReDiTor,
Thanks for the hints, I went through the points but nothing suspicious found. I have set now Resco's internal viewer as photo viewer, so I will leave the proble for now. Let's see further after the next hard reset.... :wink:

its a dll file that is screwing up..
search up the thread on saman's wm5 new menu and there is a dll switcher there..

Digital Signature PITA

I have search for about three hours now. On the forums and google. I can not find a way to make this work. Any help would be much appreciated.
I am simply trying to customize "phcanOverbmp.dll" so that it matches my phone pad skin. I use resource hacker to change the images and when I save the new DLL it looses the digital signature (expected).
I am using signtool.exe from the Visual Studio SDK and the certificates from the WM5 PPC SDK.
I tried wizard mode and I get "The Digital Signature wizard did not complete."
I also ran it via command line with the "/f SDKSamplePrivDeveloper.pfx" switch and I get "SignTool Error: ISignedCode::Sign returned error: 0x80070057"
I have tried "signcode_294" with the .bat file, that gives me "Error: Signing Failed. Result = 80070057, (-2147024809)"
I researched this issue and found that if it is XIP you cant sign it, but this .dll was taken from my device, so it should be PE.
I am really at a loss...
PLEASE help me solve this. There are soooo many things I have customized that I cant use cause of this issue.
Thanks, Lew

Ok, the problem is you are trying to edit a signed file. This is a big no no!
The thing is signature has a checksum. Once you edit a signed file it automatically becomes invalid so you can't run or resign it.
You need to find a way (sorry, can't help you there) to remove the signature before editing the file.

lewcamino said:
I have search for about three hours now. On the forums and google. I can not find a way to make this work. Any help would be much appreciated.
I am simply trying to customize "phcanOverbmp.dll" so that it matches my phone pad skin. I use resource hacker to change the images and when I save the new DLL it looses the digital signature (expected).
I am using signtool.exe from the Visual Studio SDK and the certificates from the WM5 PPC SDK.
I tried wizard mode and I get "The Digital Signature wizard did not complete."
I also ran it via command line with the "/f SDKSamplePrivDeveloper.pfx" switch and I get "SignTool Error: ISignedCode::Sign returned error: 0x80070057"
I have tried "signcode_294" with the .bat file, that gives me "Error: Signing Failed. Result = 80070057, (-2147024809)"
I researched this issue and found that if it is XIP you cant sign it, but this .dll was taken from my device, so it should be PE.
I am really at a loss...
PLEASE help me solve this. There are soooo many things I have customized that I cant use cause of this issue.
Thanks, Lew
Click to expand...
Click to collapse
If you run the sdk cab before replacing "phcanOverbmp.dll" it will work. It did for the batteryfix project that i helped jimm98y with
download one of his earlier zips that has the file you need in it. Can be combined all in one cab. edit i attached it
see here http://forum.xda-developers.com/showthread.php?t=267321&highlight=battery+fix

Thanks,
I installed that cab to my TyTN and the dll still is a no go. Any other ideas or ways to digitally sign it? I am really desperate, I have been trying for soooo long to get these to work.
Thanks, Lew

Thats strange can you send me the file to my email [email protected] and i will try to get it to work. I will include it in a cab i made before and see if that does the trick.

Microsoft has problems signing on windows 2000 SP4?
Any chance you're using Windows 2000 SP4, If so you might want to check out this link.
http://support.microsoft.com/kb/829924
Probably not the issue but, I figured I'd mention it just in case.

Sorry, but I am running Windows 95 version C. So I don't think that is the issue.
I just got a chance to check the forums, I will e-mail you the dll.
Thanks again, Lew
P.S. I am running XP sp2

I've got a similar problem. I tryed to edit some dll's from HTC Touch Phone Pad International, but since they are digitaly signed, i can't change the contents without invalidating the digital signature. The goal would be to make the phone pad look more like the dialpad. I've created all the pictures I need, and I know which dll's to change. I'm using PE Explorer to edit the resources from the dll's, but first I need a way to remove the digital signature, and after changes are made, re-sign it.
Advices anyone?

FInixNOver said:
I've got a similar problem. I tryed to edit some dll's from HTC Touch Phone Pad International, but since they are digitaly signed, i can't change the contents without invalidating the digital signature. The goal would be to make the phone pad look more like the dialpad. I've created all the pictures I need, and I know which dll's to change. I'm using PE Explorer to edit the resources from the dll's, but first I need a way to remove the digital signature, and after changes are made, re-sign it.
Advices anyone?
Click to expand...
Click to collapse
Well I got it to work. With some help I was able to rebuild the signature in the changed dll's.

FInixNOver said:
Well I got it to work. With some help I was able to rebuild the signature in the changed dll's.
Click to expand...
Click to collapse
How did you achieve this? I am having the same problem and i guess i need to somehow remove the signature too.

Yes, it'll be great to have some information about achieving this!
Thanks in advance

any more information on how to do this?

Did anyone figure out a way to do this ?

*bump* *bump**bump**bump**bump**bump**bump**bump**bump**bump*

To change the bootsplash on Artemis

It is possible to change the first image what it appears on the start??

IRREAL said:
It is possible to change the first image what it appears on the start??
Click to expand...
Click to collapse
Hopefully I have the answer for you tomorrow! I'm almost there!

rvbcrs said:
Hopefully I have the answer for you tomorrow! I'm almost there!
Click to expand...
Click to collapse
Any luck?Waiting for your results.

here it is, pls check.

The attached file refuses to open? - any chance you can re-upload it after checking if something is wrong? - Mike

Same problem for me - I cant open the zip as Winzip says it "cannot open the file, it does not appear to be a valid archive"
I am keen to change my boot screen because I want to try something I read in another forum. The idea is to add your contact details at that point.
It will be more difficult for a theif to change than the "display identification information when device is turned on" option and a hard reset shouldn't remove it!!
I hope someone finds a way soon.

I used WinRAR to unzip it and that works fine.

just change the .zip in .rar, it will work.

biranouran said:
here it is, pls check.
Click to expand...
Click to collapse
Ok..perfect!
I must now unlock the CID..someone has the necessary tools??

so far i guess you can only unlock the CID by paying imei check... Sorry

hm.
im try this utility with 2 example images and no result, my boot screen dont change
htc p3300, unlocked, 2 files copyed to windows folder, cab file installed, soft reset... no result, what can i do?

Nothing changed ... Anyone get this "thing" to work?
Cheers 8)

My M700 don't change as well

Lock a registry key

One annoying program, which shall remain nameless, keeps deleting a registry key. Without regedt32 I'm stuck for a way to deny it that permission.
Does anyone know what to do?
Thanks

*bump*
<pad_out_message></pad_out_message>

at45 said:
One annoying program, which shall remain nameless, keeps deleting a registry key. Without regedt32 I'm stuck for a way to deny it that permission.
Does anyone know what to do?
Thanks
Click to expand...
Click to collapse
could U be more precise, where what and maybe a name, otherwise can't help U