I changed my SIM company and there is no signal.... - JAM, MDA Compact, S100 General

Hi every one
I have a Super Jam US edition (the silver colored one)
I've been using it in my country (not US!) very well
but now when I changed the SIM to another company there is no signal!!!!
Is there any type of a hack or a patch or any thing that can help????
Thanks in advance

Related

Provider lost

Hello,
I have lost my provder It worked well but now I when I start my XDa it found no service.
I'm on bouygues france.
If I go to phone->network selection->manual I only see Orange or SFR.
If I try my sim card to another phone it works.
If I try a orange sim card on my XDA it works
I tried to ard reset, re-flash Rom and Radio stack ...
It seems that my XDa doesn't know any more Bouygues as a possible network.
If someone knows how I can add Bouygues as a network
zendrui said:
Hello,
I have lost my provder It worked well but now I when I start my XDa it found no service.
I'm on bouygues france.
If I go to phone->network selection->manual I only see Orange or SFR.
If I try my sim card to another phone it works.
If I try a orange sim card on my XDA it works
Click to expand...
Click to collapse
Well, I don't know the MDA I, but on an MDA II there is no way to exclude a network from being found in the Manual Selection dialog.
When you say it works with an Orange SIM, do you mean it also finds Bouygues? If yes, then we can assume that the hardware is working well.
If not, then on which frequencies (900MHz/1800MHz) do these networks operate? Could it be that your phone developed a hardware problem in the RF part so that it can only work on one of the two frequencies?
It also puzzles me a bit that you say your SIM still works in another phone. Otherwise I would have said that Bouygues blocked your SIM by mistake.
Did you try only in one place? There might be the vague chance that the base station you normally use has a defect and is offline. The other phone you tried may have a better RF part and be able to log into a more distant base station, but the MDA may not. Okay, this is a very long shot, but it may be worth a try...
If you didn't do anything to your ROM before the problem appeared, then I very much doubt that it's a software problem.
Sorry I couldn't help more.
Daniel
I'm confuse too.
If I put a sim card (the bouygues sim card or the orange sim card) on another phone (nokia fo exmaple), ask to select manually the network, I can see the 3 provider in france (Bouygues, SFR, Orange)
If I put a sim card on the XDA (the orange or the bouygues), ask to select manually the network I see only Orange or SFR ... no more Bouygues !!!
So I think it is not a sim card problem but a XDA problem ..? But I hard reset it !
I run out of ideas ..?
:twisted: I found !
My phone was turned to 900Mhz Band ...
Whereas Bouygues uses 900/1800Mhz
I changed it in the bootloader and it goes well

Logo Operator on Today Screen ? NO, NOT YET :(

another useless app
http://www.pdaclub.pl/upload/DKtoday_freeware.zip
It shows operator name (only) signal power and unaswered call
why is so difficult to put a custom s**t gif ?
damn
sigh
This is a very unfair post. :evil: If the app isn't for you don't use it. No need to be very critical for no reason. The author of this software has been kind enough to post it for free. If there was a charge perhaps criticism could be valid, but there isn't. The only other app AFAIK that does this is PhoneDashboard, which is shareware and levies a charge for the registered version. Personally, I think something like this is useful. Especially if, like me, you have two SIM cards in the phone at the same time.
Please be a little more refrained before making posts like this in the future.
dont really get why people want that operator logo anyway
me i know the name of the operator i'm connected to so why should i put a comercial on my today screen for them ?
most likely for dual sim.
M4io said:
most likely for dual sim.
Click to expand...
Click to collapse
Spot on. I bought PhoneDashboard a short time before seeing the post for DKs free app.
Have just installed a dual-sim holder in my O2 XDA II. My contract is with O2, but in some parts of the village where I live the reception is really poor so I have an Orange PAYG SIM. It's VERY useful to know which operator is active at a glance. I only want to use the Orange on rare occasions.
Operator Logo wont help you with a dual sim when you are abroad.
More important then is to know WHICH SIM is active.
One of the members here (I promised not to mention his name so he can work quietly on this) is currently developing a SIM Swichter app with Today applet that does all this & more.
Should arrive shortly!!!
I am sure a new thread will be started when its available!

Dual sim KING OF DOUBLE CARD with MDA Compact

Hi there,
Some time ago I purchased a KING OF DOUBLE CARD for my MDA Compact. It seems however that this card is not functioning in my PPC.
I am using a MDA Compact with the original T-Mobile ROM. I only partly installed the cabs because I wanted to get rid of the ugly T-mobile colours.
Could someone please provide me with some help?:
1st: does anyone make use of the KING OF DOUBLE CARD
2nd: What Rom do you have
3rd: Do I have to install something in addition?
etc etc.
Thanks in advance for your help!
Best regards
Wilfried
dont know any answers, but I do have a question...how did you make it fit?
I thought it didnt fit in the HTC Magician....so I bought another and carved up my SIMs
works fine though, using Wivit SIm Status Switcher with it to switch SIMs..
you could try it, its a great app
which model did you buy? what do you mean by "carved up my SIMS"?
He probably means a ghost sim, where you cut the chips out of two sim cards and out them into the ghost sim which is normal sim size.
Hi there,
It is a model where you don't have to cut your sims.
Yes you are right: it doesn't fit that easy however with some pressure on the back of the phone it fits.
The problem however is that my phone doesn't recognize the damn card.
I am cosidering to throw it away and take a second phone with me for the other SIM. Again waste of money. hmmmmm
Best regards
Hi there,
It is a model where you don't have to cut your sims.
Yes you are right: it doesn't fit that easy however with some pressure on the back of the phone it fits.
The problem however is that my phone doesn't recognize the damn card.
I am cosidering to throw it away and take a second phone with me for the other SIM. Again waste of money. hmmmmm
Best regards
Hi there,
It is a model where you don't have to cut your sims.
Yes you are right: it doesn't fit that easy however with some pressure on the back of the phone it fits.
The problem however is that my phone doesn't recognize the damn card.
I am cosidering to throw it away and take a second phone with me for the other SIM. Again waste of money. hmmmmm
Best regards
Double SIM work fine on my XDA mini
Hello all,
Just want to share some info, I use Almighty Bicard on my XDA mini, and it's working fine on it, just turn on your flight mode, then turn off your flight mode than you will get your second SIM.
Or you can use SIM master or SIM MAX, it can handled 8/12 SIM no. on 1 SIM card, but some time you have problem to scan your original SIM card.
Thanks, Vireman
Can you point me to the specific dual sim you use??
I bought the ghost sim and couldn't get it to work, I tried on 4 old sim cards and decided not to cut up my work sim and personal sim.
I have been looking for the other typoes which take the full sim cards.
On another note it may not work because you will need to get the T-Mobile phone unlocked to work with another companies SIM.
My work sim is o2 and would only work after the MDA was unlocked.
You can phone T-Mobile ans they will send you the code to do this for £15.
Hallo ishgrnod,
I use Almighty Bicard, You need to cut your SIM chip and put it together on Almighty Bicard. It work like a switcher, If you restart your phone it will switch to another SIM.
Mostly in my country there no phone lock from the operator, I think your problem come from this side.
Thx. Vireman
Isn't there a universal phone unlocker already on the forums?
I use this cut up dual sim in the UK:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=6415916094&rd=1&sspagename=STRK:MEWN:IT&rd=1
from this user:
http://feedback.ebay.co.uk/ws/eBayISAPI.dll?ViewFeedback&userid=slam1416&iid=6415916094&frm=284
Works fine. Just have a steady hand when you cut, measure twice, cut once
I use an O2 contract and orange PAYG. Some reports say O2 contract doesn't work. Mine does, no problems.
V
I bought a King Of Double Card for my MDA Compact. I cannot get it to fit at all.
I don't really want to chop up my SIM cards either :?
OK, UPDATE:
I got it to fit but the phone will not recognize the cards. I'm using WiViT SIM Status Switcher.
Can anyone suggest recommend a different tool ?
I'm on
ROM Version : 1.12.00 WWE
Radio : 1.12.10
ExtROM : 1.12.131 WWE
WiViT isn't likely to be the problem - it just reads the operator from your network, and the sim phone number stored in your Sim; you may not have one stored in there (I bloody didn't and thought my EVC programming was at fault). See WiViT's faq, or basically open up Sim Manager on your phone.
But, ignore wivit, just ensure you can make a telephone call with either sim. Then, switch over with STK or flight mode off/on and see if you can make a call with the other Sim. If that works, then your problem is with WiViT. If it doesn't your problem is with the sims. See my other posts on these cut up sims - basically, i think Magician doesn't put enough pressure on the back of the "mini sims", and you need to stick some paper down the back of the metal sleave.
V
PS See the thread on Magician today screens to see my Wivit type software...
Hey V, thanks for the advice...
My problem was down to the single SIM end of the Dual SIM not making contact with the connectors in the phone. I have the King Of Double Card Type, as shown in my crude mockup below. ( I dont dare take mine out to take a picture since it took me all evening to get it in right. So please excuse the picture.)
WiViT is working perfectly now, i made sure my own numbers were stored correctly as you suggested, and all is well.
The only problem is, the back of my MDAc is slightly out...but i can live with that i guess (until the MDA Pro (HTC Universal) is released)
8)

2 Sims ?

Any one tried any kind of solution to have two sims installed ? Software / Hardware ?
Terran
Hardware
the one where you have to cut the sim out and stick it into a single SIM.
then you will have to turned on flight mode and turned it of when you want to switch
work great for me (Qtek S100, S110 and now 9100-wizard)
See ya
Has anyone tried the 'king of double card'type dual sim adapters in the Wizard. I have one in my Himalaya and I heard that there is also enough room in the Magician. Would like to know if it also fits into the Wizard (planing to buy one) because I do not like to cut my sims!
Hi bruxelles5
i couldn't understand you bruxelles5 !! would explain it ? thank you in advance
You cut the chips out from two of your existing SIMs and insert them into a special holder that a fits in your phone's SIM slot.
Each time your turn the phone on and off (or use flight mode) it switches between SIMs.
An example here http://duosim.com/.
Another type gives you an extra menu on supported phones to switch numbers without having to turn it on/off.
Note - I've never used any of these gadgets so YMMV. And cutting up your SIM risks damaging it permanently.
I use a SuperSIM card that lets me store up to 12 different sims on the one sim card. It came with a reader that lets you copy your individual sims to the computer, then copy them all to the SuperSIM. Works fine on the Wizard.
Hey mitchelo,
This supersim sounds interesting. How do you switch from one sim to another using your Wizard?
Mitchello wrote
I use a SuperSIM card that lets me store up to 12 different sims on the one sim card. It came with a reader that lets you copy your individual sims to the computer, then copy them all to the SuperSIM. Works fine on the Wizard.
Click to expand...
Click to collapse
Wow! that sounds like a neat piece of kit!...
I uesd a dual sim holder and this sim switching software on my xda 2s.
http://www.pocketgear.com/software_detail.asp?id=19046
Worked pretty well, although beta version did not always pick up one of the telephone numbers. They may have fixed this in the 1.0 version.. You can download the trial and see if it works on the wizard. I have not tried it yet..
Regards
Chris
The SuperSIM has a menu that lets you choose between the 12 numbers. It appears as an icon in the programs list. Just click it and you will get the menu.
I have a Telstra and Optus SIM on my supersim.
(P.S. this message was sent from my K-JAM )
Looks like a good bit of kit. Checked the web site out and it looks like it sells for $45 plus shipping. One question though. It talks about only being comaptible with sims that have a couple of different 'formats/protocl' (for want of better words) I am cluless as to what this is for Tmobile USA and 02. Can you shed any light on if I might have a compatibility issue using it?
Many thanks!
Chris
There are some sims that this won't work with. For example I can't use vodafone sim cards with it. I did some searching online before I bought, and knew that voda wouldn't work.
As the expression goes, 'google it'
ok, many thanks, will do. Probably better than trying customer care eh
@cbrow51:
Search the internet for any Ki extractor or a software called Cardinal (can't remember the link).
Extracting the Ki from your sim is the first step you need to create a backup. As of today we are able to extract that value from Comp128V1 cards only. SuperSim and similars are able to emulate these type of cards.
So, give that software a try. If it is able to extract the Ki, feel free to purchase the supersim or whatever.
Save your money for a dinner with your partner, if the software fails.
I hope it does help.
Silver.
You have to have a SIM reader that comes with the SuperSIM to check the Ki. Just google your service provider with something like "{your carrier} supersim". Worked for me.
Almost true, mitchello...
My dearest old smart mouse did his job seamlessly.
Furthermore some of the tools I am talking about are free.
When I was working for another company, I used to carry two mobiles with me. Until I found SIMEMU (still largely available for free on the net) coupled with a set of completely free tools that allowed me to backup my two SIMs into just one.
Search the net for SIMEMU... you'll see that the SuperSIM guy has reinvented the weel... getting payed for his efforts !
C'ya mate.
hi there. where did you buy this super sim and how would i find its compatability with uk network sim cards
cheers
I got mine on eBay. Ask the seller about compatibility, or look on Google.
hi there. thanks for the prompt reply. do you remember who the seller was on ebay. help much appreciated. cheers.
I got mine from a seller called "memoryku". He has several auctions like this one atm:
http://cgi.ebay.com.au/SUPER-DUAL-M...832609382QQcategoryZ10364QQrdZ1QQcmdZViewItem
These only work with comp128 - v1 cards.
UK cards are not this so it won't work

NewZealand Vodafone SimCard not working ...

Hey guys,
I finally got my P3600 send over from Europe ... (none branded HTC Version... so no Vodafone Lock or so) However, if I insert my German SIM it will be recognized, but if I do the same with my NewZealand Vodafone Prepaid it jsut tells me that there isn't any SIM inserted Both Sims work fine with my German Nokia so I am not sure what the problem is.
Does anybody have a similar problem or know how to fix this?
help really appreciated
Rodpacker
rodpacker said:
Hey guys,
I finally got my P3600 send over from Europe ... (none branded HTC Version... so no Vodafone Lock or so) However, if I insert my German SIM it will be recognized, but if I do the same with my NewZealand Vodafone Prepaid it jsut tells me that there isn't any SIM inserted Both Sims work fine with my German Nokia so I am not sure what the problem is.
Does anybody have a similar problem or know how to fix this?
help really appreciated
Rodpacker
Click to expand...
Click to collapse
Hi rodpacker
Welcome to the short list of members with a P3600 in NZ
Unfourtunatley I can't help you at the moment, I have a VFNZ OnAccount SIM that works fine, I guess I could try out my missus PrePaid SIM if you still can't get it to work after a couple of retries.
If you live in Auckland you could rock into CoolMobile or ETown, they were selling P3600's for a while and may have come across issues with PrePaid SIMs.
Not that it would make any difference, but do you have a SIM2 or older SIM card, and what size KB is it? Also I presume you have credit on it....
I had a similar problem when attempting to use my old China Mobile SIM, and got it sorted by getting the later version SIM card.
hm, good to hear that there is some others
I got a vodafone prepaid I bought like two months ago....Not sure which version it is. It says 128k and 3G on it. Does that tell u guys anything?
thanx heaps for ur help...
and jep I am in Auckland. Although got two p3600's and gonna sell one of em soon ... brand new!
How much where they when they were sold over here?
cheers
Rodpacker
tried another prepaid .... still no luck
last night I thought I might have to unlock my phone and it wasn't unlocked as I thought, however after ur message concerning NZ SimCards I doublechecked again and after using a German Medion Simcard, that worked I tried a UK O2 prepaid and that worked as well...I even got roaming going...So I guess I can save myself the hazzle of reunlocking the device...
Now could u maybe give me some more hints on the problem with NZ Vodafone Simcards?
thanx
Rodpacker
Hi rodpacker
A 128k 3G SIM should work. Have you tried your new SIM in another phone to make sure it's not a dud?
The P3600's were going for around $1200-1300 (NZD). Not sure why they stopped selling them (maybe because they wern't selling ). I got mine imported from the states for $800NZD delivered in box with warranty, so that's what you would be competing with to sell your spare.
jep card is working in my other phone atm ...
thanx for the price info...
good to know. Still busy skinning mine with the iphone skin and ipod player...since touchFlow isn't out for our model yet... will go to those shops u were talking about tomorrow
cheers
Rodpacker
Hi Rodpacker,
Sorry for my english..
about your problem, I remember a forum with a boy with similar problem...Can you try to speak about your (NZ) vodafone customer service. If i remember well the cust.serv unblocked a sim...
If I have not understand your problem, sorry
Bye
I think I'm about the only one who actually bought a P3600 retail in NZ, at the time it would have cost more to get it in from overseas...
But I'm probably not much help, my SIM is also on account - and is an ancient one as well! Was one of the original SIMs before the days of SIM2...
What radio version does your one have on it? Go to Start->Settings->System->Device Information to check. I've had issues with one of the later radio versions (1.46.x) in NZ, accepted the SIM ok but couldn't receive any calls. Currently using v1.38 which seems to work ok.
The radio ROM talks to the SIM, so this could be the issue.

Categories

Resources