Hi Everyone,
Im using HTCRIE to remove some of the pictures, videos, sounds etc. from WM6 which just take up space and I was wondering what else could be removed to make a very lite, fast version of WM6. I rarely if ever use most of the things on there as the programs i do use I load on afterwards anyway.
Does anyone have a file list of what they have removed with no problems to everyday running of the phone?
Cheers
Related
Hi im new to smartphones, with the wing being my first. Ive installed some applications, like orb, tcmrp, etc. Some i have uploaded are either not working or confusing me and was wondering of you could help:
http://www.freewareppc.com/download/games/newescapemobile.shtml- the file downloads, but then cannon read
http://www.aspecto-software.com/rw/applications/wififofum/index.html-downloaded .cab. Not sure how to actually connect to the given access points.
http://gpsvp.garminmapsearch.com/?page_id=5-this was a total mess. It loaded and i loaded up a map i downloaded (just navigate through site to find) but it just shows up as blue screen
Also i dont wanna use 3g/gprs since it uses data connection(right?) so i wanna know how to disable it permentaly.
Edit: the slide to unlock.cab, how do i use this?
Re-Edit: how do i set songs as ringtunes? what requirments have to be met?
Edit: How do u use .exe's. they cannot be read when i try on phone (this is for games)
Also any other really useful applications would be helpful
thanks
I do not use TF3D, and was wondering as it takes up around 20MB of storage (i think) can you simply delete to save space and help speed up the device?
If so what files/folders do I delete without affecting other programs?
2 Options:
Disable It
Flash A New ROM
I have it disabled but it still takes upthe space on the device. Can anyone recommend a good clean basic ROM (as in no TF3D installed and really no other WM apps as well such as MP3 trimmer etc)?
Thanks
Flash a Naked ROM
wilfmoralee said:
I have it disabled but it still takes upthe space on the device. Can anyone recommend a good clean basic ROM (as in no TF3D installed and really no other WM apps as well such as MP3 trimmer etc)?
Thanks
Click to expand...
Click to collapse
Try flashing a Naked Rom like THIS one then. You can add what you want.
I am fairly new to this forum and I am sure this has been explain on here once before. But I though this might be a little easier than searching through countless pages of posts. I want to know if there is a way to clear up the program memory. If I could I would like to be able to delete the Office mobile stuff if that would help. Dont see a need for it since I work on macs mostly. Of if there is way to trim it down. At the moment my program memory is 43.87 MB and it says 40.91MB is in use but I only have window media running and only 3MB available. Is there something I can do. What is taking up all memory. Even after a soft reset. The most I have ever seen it go up to is like 14MB and that is just for a while then it begins to rundown. Thanks for you help in advanced.
Carlos
CleanRAM - http://thewingster.com/cleanram.aspx
Thanks Ace..good work..is there a way to get into the registry and delete some of the office mobile stuff, like work powerpoint and excel or would I have to do a complete flash
toreone said:
Thanks Ace..good work..is there a way to get into the registry and delete some of the office mobile stuff, like work powerpoint and excel or would I have to do a complete flash
Click to expand...
Click to collapse
You would have to flash a ROM without Office Mobile. Look on The Wingster (http://thewingster.com/roms.aspx) and find a ROM that doesn't include Office Mobile. I tell you if it doesn't include it, so it should be fairly easy to identify that.
But going into the registry wouldn't be where you'd delete that stuff. You'd find it in the file explorer, \Windows. I'm not sure if you can delete those files though. I'd just flash one of the numerous ROM's that doesn't include Office Mobile, there's many of them.
Office Mobile is in most cases (there are CABs out there, so that you can install it on stirage card) in the ROM and can't be deleted in an easy way. The File Explorer doesn't delete it. Midnight Commander can delete files, which are in the Main ROM, but only use if you know what you're doing! This program can delete all files - important system files, too!
The most easy way is, as ace already said, to flash a rom without Office Mobile. But be careful and read a lot before you flash a new rom! A broken flash may cause a broken phone!
That is one of my biggest fears is bricking my phone and not being able to bring it back. I am currently running SPB Mobile 3.0 and I like that a lot. That is what I would like to run permanently. Maybe when i upgrade or buy a new phone I will practice on my old wing. Thanks guys for the info!
program mem == application mem
storage mem == files on your device
application mem is used by programming which are running nothing else
storage mem is used by files stored on your device
freeing up app mem don't give more storage and virsa versa
I'm new here so please bare with me. I just bought a used Sprint Mogul and I'm looking to "play" with it a bit. Nothing real crazy as I've been scanning this forum over the last few days waiting for my phone to come in the mail and I just want to keep it simple. I have the programs that I want to load on the phone and I don't need to flash the ROM or anything like that to use these. My question is this. Do I need to unlock my phone to add these programs and how do I load them to my phone ? Do I need a special program to do this or can I just use active sync ? The instructions I have to load the programs are pretty simple but they do not tell me how to install them. Just the order to install them and soft reset etc. I have found some really cool things on this forum about my phone but as much as I have learned I also have alot of unanswered questions as well.
Thanks in advance.
Fairly simple....
If the program you want to install is an .exe file, then you will hook your phone up with the usb cable and let active sync do its thing. Then double click the file to install. Active sync will prompt you with the rest.
If the file is a .cab file, then transfer the file the way it is to your microsd card using the active sync browse. Browse to the folder you want to put it then drag and drop or copy/paste. Then on the phone, tap start/programs/ file explorer. Go to where the .cab file is and tap it! Thats all!
If you install a program you dont want installed anymore you can un-install it through start/settings/system remove programs.
Remember... the programs you use every time your phone is on... like dialer skins, today screen themes, rintones, etc install to device memory! Other programs like games, mp3 songs, videos, ebooks, etc can go to the microsd card!!
Good luck!
T
thundaar2000 said:
Fairly simple....
If the program you want to install is an .exe file, then you will hook your phone up with the usb cable and let active sync do its thing. Then double click the file to install. Active sync will prompt you with the rest.
If the file is a .cab file, then transfer the file the way it is to your microsd card using the active sync browse. Browse to the folder you want to put it then drag and drop or copy/paste. Then on the phone, tap start/programs/ file explorer. Go to where the .cab file is and tap it! Thats all!
If you install a program you dont want installed anymore you can un-install it through start/settings/system remove programs.
Remember... the programs you use every time your phone is on... like dialer skins, today screen themes, rintones, etc install to device memory! Other programs like games, mp3 songs, videos, ebooks, etc can go to the microsd card!!
Good luck!
T
Click to expand...
Click to collapse
Thanks for the reply. Sounds pretty simple. I have another question. This is going to sound pretty dumb I'm sure but I'll ask anyway. The programs I'm going to load...will they over write the programs already on the phone ? I understand there is internal memory and this phone seems to be just like a pc. And I know that when memory gets low or used then things tend to slow down and run bad. BTW the programs I'm going to install are Manila2D and a few others. Don't know much about them but a friend of mine had them put on his Mogul and I like the way it looks and runs compared to the "stock" setup.
Thanks again.
I have another question to ask. Is there a way to back up your contacts list ? If I understand it right.....a "hard reset" will wipe your contacts list along with everything else you have put on the phone and not the sd card. Right ?
Hello everyone.
My wife recently picked up a Tilt2 and is migrating from her Palm TX.
She is looking for a replacement for Pocket Money, Pocket Quicken, and something else I've forgotten the name of but she's looking at SPB Pocket Plus, Pocket Finance Diary lite (from mobile9.com), and CryptoWallet, none of which did I find listed in Apps thread.
If anyone has used these apps are they not worth the cost? Are there any simular apps that perform better for less or free?
For games she is looking at Happy Lines, Uno (it is in the Apps list), and Matching Hearts; and would love other recommendations for any Bejeweled-like games. She also would like a music player which has a random play feature. I see several listed in the Apps thread but didnt research enough yet to see which has that.
Thanks for any and all help or comments.
Tim
Popatim said:
Hello everyone.
My wife recently picked up a Tilt2 and is migrating from her Palm TX.
She is looking for a replacement for Pocket Money, Pocket Quicken, and something else I've forgotten the name of but she's looking at SPB Pocket Plus, Pocket Finance Diary lite (from mobile9.com), and CryptoWallet, none of which did I find listed in Apps thread.
If anyone has used these apps are they not worth the cost? Are there any simular apps that perform better for less or free?
For games she is looking at Happy Lines, Uno (it is in the Apps list), and Matching Hearts; and would love other recommendations for any Bejeweled-like games. She also would like a music player which has a random play feature. I see several listed in the Apps thread but didnt research enough yet to see which has that.
Thanks for any and all help or comments.
Tim
Click to expand...
Click to collapse
Hey Popa, welcome to this corner of the forums
The only question you asked that I can help with is the media player..I can tell you that the built-in HTC music player has a random play option, and it's a nice simple option if she doesn't need much flexibility. However, most any of the commonly used 3rd-party players (coreplayer, TCPMP, nitrogen, etc) certainly can do that as well, so you just have to gauge what else is important in a media player for her. WMP is also built-in of course, and also not half-bad for basic use.
One more thing to help you out...I'd highly recommend running the two cabs I've attached on her new phone. They change some settings in window's memory management that free up memory much faster when apps and processes are done using it...they'll save you a lot of headache when she would have come to you complaining because her new toy is running like molasses (which could still happen...keeping this phone running smoothly especially regarding memory can be a real challenge). The 3rd cab is up to you, but it's a very helpful utility written just for the Tilt2 called CrudScraper that lets you rip out a bunch of the stock apps (only the ones you choose) and crap that AT&T was nice enough to load it up with for you. It's not a cab though, just run the .exe from her SD card and it's self-explanatory from there. Let us know if you need instructions on running the cabs too.
Good luck! I'm sure you'll get some answers to your other questions soon...but if not, you might want to post in the general windows section of the xda forum since most of those programs will work on a lot more models than just the TP2, and you might get more exposure and response that way
SPB Pocket Plus works fine and syncs with Money. I liked the old money client you used to get better but it gets the job done.
hx4700 Killer said:
SPB Pocket Plus works fine and syncs with Money. I liked the old money client you used to get better but it gets the job done.
Click to expand...
Click to collapse
Hmm, are you sure you're not confusing Pocket Plus with something else (e.g. SPB Finance)? Pocket Plus is more of a system utility, that doesn't sync with anything. Besides, not all features of Pocket Plus are compatible with WM6.5, so that's something else to take into account.
sirphunkee said:
One more thing to help you out...I'd highly recommend running the two cabs I've attached on her new phone. They change some settings in window's memory management that free up memory much faster when apps and processes are done using it...they'll save you a lot of headache when she would have come to you complaining because her new toy is running like molasses (which could still happen...keeping this phone running smoothly especially regarding memory can be a real challenge). The 3rd cab is up to you, but it's a very helpful utility written just for the Tilt2 called CrudScraper that lets you rip out a bunch of the stock apps (only the ones you choose) and crap that AT&T was nice enough to load it up with for you. It's not a cab though, just run the .exe from her SD card and it's self-explanatory from
Click to expand...
Click to collapse
i have a question:
1. NoPushInternet_v2.CAB - where do you install device or storage and do you do anything after install, also do i leave the installed cab on my device or can i uninstall it with its done?
2. SSK TP2 Dynamic Resource Proxy.cab - same question?
thanks
apax said:
i have a question:
1. NoPushInternet_v2.CAB - where do you install device or storage and do you do anything after install, also do i leave the installed cab on my device or can i uninstall it with its done?
2. SSK TP2 Dynamic Resource Proxy.cab - same question?
thanks
Click to expand...
Click to collapse
Install them both to the device, they're very small, and then once you do that you can delete the cab if you want...though I recommend keeping a copy on the SD card of any cabs that you use, so you can reapply them easily if you ever hard-reset. These automatically run in the background once installed, no need to manually start anything.
apax said:
i have a question:
1. NoPushInternet_v2.CAB - where do you install device or storage and do you do anything after install, also do i leave the installed cab on my device or can i uninstall it with its done?
2. SSK TP2 Dynamic Resource Proxy.cab - same question?
thanks
Click to expand...
Click to collapse
sirphunkee said:
Install them both to the device, they're very small, and then once you do that you can delete the cab if you want...though I recommend keeping a copy on the SD card of any cabs that you use, so you can reapply them easily if you ever hard-reset. These automatically run in the background once installed, no need to manually start anything.
Click to expand...
Click to collapse
thanks for the quick response...
sirphunkee said:
Install them both to the device, they're very small, and then once you do that you can delete the cab if you want...though I recommend keeping a copy on the SD card of any cabs that you use, so you can reapply them easily if you ever hard-reset. These automatically run in the background once installed, no need to manually start anything.
Click to expand...
Click to collapse
I have been running these cabs for a few weeks now. it seems they stop working after a while. I have noticed my mem usage was in 65-70% again and even after a soft reset, stil up there. Only thing that works is reinstalling the SSK TP2 cab then miraculously back down to 49%. Am i missing something on keeping these running in the bckgrnd? i mean i dont mind reinstalling but feel kinda silly doing it over and over.
Thanks
Joe