Everything works fine except that the screen is white with jumbled colored lines. I had MyMobiler running and I could see the phone perfectly from it and use it. A soft/hard reset will not work and I tried flashing back to button rom with no luck.
This happened to me before but I flashed button rom and everything went back to normal. Then it happened again 2 weeks later and this time I decided to try stuff out and discovered that putting backlight to nothing then putting it back on fixed the problem. But this time, nothing seems to work.
Any ideas? Should I try the method posted in this post? http://forum.xda-developers.com/showthread.php?t=424553
Aye, I posted that, and it is the fix of choice around here for that problem. Do it and all should be fine again.
Ok I will try that in the morning but I didnt think it was hardware related since I managed to fix it by flashing the first time.
Well, it seems to be a tempormental problem. Some people can "slam" their keyboard shut and it will fix it for good, while others have to take their phone apart to get it back to normal.
Thank god! I successfully fixed my display by flashing the original cingular 8125 rom !!!!
Now I have regrets about slamming the keyboard/'gently' hitting the display poor phone.
Ok I spoke too soon.. after the flash was completed, it went back to the messy display.. Well I know now that it is not hardware related.
Update: I had my phone plugged to the PC with USB and had backlight constantly on.. 3 hours later, the screen came back to normal... Hmm?
I have found a permanent solution for this. I have noticed this problem occurs when my battery is very low and my phone turns off right when I switch the phone on.
So to solve this, if powering on phone didnt restore the screen, just press the reset button until the screen fixes itself. It has worked everytime my phone had those white and colored lines.
Related
Any help is greatley appreciated. I just bought the xda2 a week ago and it worked fine until yesterday. At first the phone just wouldnt dial. Then it would freeez. After a soft reset, it wouldnt go past the first "o2" screen and would just hang. The blue light started flashing eventhough I never enabled Bluetooth. The system didnt start past that screen and it also wouldn't shut off. Even after a hard reset it still had the same symptoms(it froze at the bootup screen and had flashing blue light). Around 30 minutes later after trying to turn it on and off. I finally started. But then it happened again today. Thanx in advance
If it still displays these symptoms after a hard reset then it look like a hardware fault. Only other thing i can think of is if you have a memory card inserted that is upsetting the system.
It doesnt have a memory card. I was afraid it might be hardware related. Any idea on how to have it repaired from the US
Just got a s/h exec and I think it is faulty. Whats happens is it starts up ok and works for a while and then for no reason that I can think of it goes into a loop which stops it from working.
When I say a loop I'm not sure thats the right terminology but imagine if you tapped the start button and the start menu opens... and then imagine you tapped the tab button , the next item would highlight. If you tapped the tab button again the next item would highlight and so on. Well its as if the tab button is being hit over and over because all the items in the start menu will be highlighted one after the other over and over again.... it just goes round and round in a loop.
Its possible to escape from this and go to another screen but the same looping will go on in that screen too.
If you switch off and leave for a while and come back to it it works ok for a short time and thens starts the carry on again.
Sometimes if you just wait a while it stops, but will start doing it again even if you dont touch anything.
I've noticed one way to force it to stop is to slide the volume button... this seems to stop the loop and allows normal function for a while.... then the crazy looping starts again.
Has anyone seen this or know anything about it.
Nope sorry, maybe you can have it replaced where you bought it as from your post, you can recreate the problem easily.
Side Note : Have you tried Hard Resetting? Or installing another ROM?
I have tried hard resets and factory reset... problem remains.
Will try new ROM.... just trying to figure out how to do it !
weegee said:
I have tried hard resets and factory reset... problem remains.
Will try new ROM.... just trying to figure out how to do it !
Click to expand...
Click to collapse
Just download a new ROM form imate or something, unpack all the files in the ROM update to a directory, put the attached file in same directory.
Enter bootloader mode (Backlight + Power + Reset Hole) you will see SERAIL on the screen but not backlight so look hard.
Plug into PC, the SERIAL will change to USB
Run the attached file. You will see a photo of an S100 but continue anyway....
Hard reset when finished... DOne
ok have installed latest rom... but exec still doing loop loop
Just for arguments sake, can you try installing Imate's newest ROM?
yea thats the one i have just put on.
It seems to be doing the problem less than before. I notice that it does stop if i press the backlight key or move the sound slider.
I'm wondering if there is dust or dirt got in behind the buttons or something like that... although I would have thought other people would have come across this b4 if that was the problem. The machine is one of the first to come out, although I just got it a couple of days ago.
weegee said:
yea thats the one i have just put on.
It seems to be doing the problem less than before. I notice that it does stop if i press the backlight key or move the sound slider.
I'm wondering if there is dust or dirt got in behind the buttons or something like that... although I would have thought other people would have come across this b4 if that was the problem. The machine is one of the first to come out, although I just got it a couple of days ago.
Click to expand...
Click to collapse
If you have tried different ROM flavors and still get the same problem, then it is definitely hardware related. Send your unit in and demand for a new one not a repair
Just been playing around with it again and notice that I can make the problem happen if i press any of the keys on the navigation pad except the top one.... and i can stop the loop by pressing the light button.
Weird or what.
My initial thought on this is maybe its got wet at some point
I have opened the xda up and stripped it down to all its parts. No sign of any dampness or dust dirt etc. Dont see anything missing or broken.
Put back together, but still doing this.
Driving me nuts.... its a great machine but is very tiresom to use with this going on.
Another think I notice about this machine, I have never used it as a phone, but I tried putting a sim card in and There is no sound through the earpiece. Only sound comes from the speakers when you set it to speaker phone.
I suggest just return it and have it replaced. It's probably a faulty button. Probably gets stuck whenever you press it.
Doesnt need a button to be pressed for it to start.. just starts by itself... and can stop by itself too.
Sometimes it can for ages without doing it, other times it does it all the time.
Cant figure if its hardware or software problem
GHOST-IN-THE-MACHINE
Yea... maybe I should get a priest !
I had this problem when i first got mine, if you move the sound slider down, then up, it seems to stop doing it for a while, and it hasn't happened in the last couple of weeks atall, maybe its because its new, and just needs to settle in?
Jay
Well at least I'm not the only one to have it.
My sound slider does stop it happening but only for a while and then it starts up again.
The machine is perfect in every other way, its just an annoyance I could do without.
I've tried everything, even stripped it down and left parts out, like buttons, to see if they are the source, but no difference.
I have the same problem!!!!!!!!!
Someone help please!!!!!!!!!!!!!!!!!!!!!!!
I have same problem. I send to service but until today they can't repair that problem.
heyy everyone i have a bell vogue. It was working perfectly untill a couple of days ago when i woke up to find the screen didn't work. The phone would turn on and off, and seemed to function normally except that there was no display whatsoever. The backlight was also working, but there was nothing else. I performed a hard reset by holding the call and end buttons while soft resetting and the screen came back. Now the problem has happened again (3 days later) and neither soft nor hard reset will get the screen to come back.
does anybody have any ideas? i would guess that its a hardware issue except for the fact that it came back the first time and worked for a few days. btw i have not installed any custom roms or radios.
thanks!
I am having this problem for last 1 week or so. My Touch HD screen won't turn on, stays black but in the background it's working. it's responding to touch gestures. vibrates when i press call,end, home buttons. I have installed My Mobiler, so i can see the screen in my PC but it's all black in phone. Sometime it comes back in few minutes and sometime it takes hours. I have tried hard reset, different roms, stock rom, stock spl, updated radios but nothing so far. Is it a Software issue or is it hardware based?
Thanks in Advance.
anyone?.......
happens to mine to.... do u drop urs? mine drops quite often when i get out the car.. it has scars..
im thinking of sending it off..
supasye said:
happens to mine to.... do u drop urs? mine drops quite often when i get out the car.. it has scars..
im thinking of sending it off..
Click to expand...
Click to collapse
no i don't think i have ever dropped mine.
I have tried everything i can think of, it just started happening about 10 days ago. It's getting worse now, screen stays black for hours, even restarting the phone doesn't help.
This actually happened to mine as well, and I was very close to sending it back under warranty. However I removed the battery & SD Card overnight and tried phone again. This time it rebooted fine with screen working properly. Try this and see if it works.
The problem with the HD is its not very well put together and a number of people have had issues with motherboards & faulty/loose connections with the screen resulting in the symptoms you are experiencing.
If has since happed again and I decided I couldn't wait so I took device apart and fixed loose connections again.
Under no circumstances should you try this unless you are 100% comfortable and know what you are doing as opening up device will void your warranty
Hi Guys i hope somebody who knows about capacitive touch screens can help me! I have taken my HD2 apart to fix a smashed camera lense. On removing the back cover i used a small screwdriver to prise off the back case and unclip it all round. It came off with no problem, i fixed the camera and put it back together. When i turned the device back on the touch screen isn't responding to my finger on any screen. Like i turned the touch screen off! The hard buttons still wok but nothing from the screen. Nothing looks damaged (I.e the glass isn't smashed). I seem to think i might have damaged something when prising the cover off with the screwdriver. Please, any suggestions would be really helpful!!!
Can anybody out there help with this? I am currently without a phone :-(
I have exactly the same problem, but it happened from nowhere. I didnot unscrew anything. Please Help
Check the flex cable.. this part are very delicate.
is this :
http://img.diytrade.com/cdimg/92507...creen_Full_LCD_for_HTC_Touch_HD2_HD_2_LEO.jpg
same problem
ive got the same problem, mine just stopped working, i performed a soft and hard reset, removed the battery still nothing. it worked for a moment but once locked it stopped working again, only the hard buttons.
same problem but it works on and off. basically the screen will respond until the phone is put into hibernate. the after that id have to push the phone button and end button back and forth until it responds
Same Issue independant of ROM
Same issue here.
Funny thing is it started a week or two ago randomly out of the blue.
Same scenario:
lock the phone can't get touchscreen to respond for unlock
Judging by these posts everyone started seeing this about the same time, maybe it's a software issue or background app .
Help!
I have same problem. It can work for a couple of hours or in 1-2 days then just stop responding, almost every time when in hibernate. Lets just hope it's not hardware failure.
This started happening to me this morning. Out of 50 tries, managed to unlock the phone three times only. This happened out of the blue, right after i removed my phone from the charger.
Have soft reset, hard reset, reflashed ROM, but the issue still remains.
I really really hope this is not a hardware issue.
Does anyone out there know how to solve this? My phone is virtually unusable right now...
Same problem here, I've been testing for about 2,5 months now and today I've sent mine back to HTC . I think it's a hardware problem, tried everything from hard resetting to reflashing. When I press the HTC logo and keep it pressed the screen does respond again. Conclusion: hardware problem.
dio62000 said:
Same problem here, I've been testing for about 2,5 months now and today I've sent mine back to HTC . I think it's a hardware problem, tried everything from hard resetting to reflashing. When I press the HTC logo and keep it pressed the screen does respond again. Conclusion: hardware problem.
Click to expand...
Click to collapse
You're probably right.
I've also tried everything. But kind of strange that if I lock when not on home tab it seems to work. And the screen, almost always, reacts as it should as long as I just dont' lock it.
I just started to get this issue. touch screen works fine until it hibernates. reflashed, still happens. found this in my search:
htcphones.net/htc-hd2-problems-with-touchscreen/
just got off the phone with tmo. they are sending me a new one.
Yeah, it happened to me as well. I opened a new thread like a month ago explaining the problem: http://forum.xda-developers.com/showthread.php?t=710282&styleid=15
and I contributed in another one concerning the same issue here: http://forum.xda-developers.com/showthread.php?t=708530
Summing all up, it ain't caused by a software or a ROM of some kind (at least in my case) because soft and hard resets didn't solve it nor did the flash of a stock ROM. The most probable cause is a digitizer (touchscreen) defect that appears randomly and totally out of the blue. The only thing to do in my opinion is to send the phone in for repair, which I did. It came back with a check mark on "calibrated screen" checkbox. As of now phone's working fine and I hope they solved it even though I read of other people who have had their leo's screens completely replaced..
A curious side note: htc care reset to zero my phone's call duration timers..
I'm not sure if it's the screen. In my case I think it's the connector from the screen to the motherboard, because pressing the housing seems to help.
But let's see if HTC is able to repair it, I hope they are, because the problem is so random they might not even see it
After losing functionality on my touch screen for a week, finally decided to send it in. Took the trouble to revert my HSPL to original and Stock Rom.
Repair should take about a week. Now I'm stuck with an ancient Nokia 6230i for this week. I feel so lost without my ppc. Have had one for as long as I can remember.
Hopefully the phone comes back okay...
I've had so much problem with the screen not responding so I did all backup then reflashed, hard reset to put the device back to stock. Did this during the weekend, I even fired up my old iphone 3g to have as backup phone.
All set today to go to the store and have it repared under warranty.
But since Sunday evening it works perfect. I've been testing it a lot and the screen has not stop responding even once.
This might be just temporarily but does anyone else experienced something like this?
Mine sometimes worked well for hours... days... but eventually the problem came back.
Mine died on me when I was actually out of the country (stuck in Vietnam without a phone). It would work for 5 minutes, then stop for hours. I would have to switch my phone on and off for a couple hundred times before it worked for another 5 minutes...
Got so tired of it that i sent back my HD2 for warranty repair. Expect it to be back tomorrow (or Friday at the latest). Hope there's no further problems with it.
I hate to say it, but the HD2 is known for its highly defective touchscreen. Even when it's working, a lot of people experience strange and bothering events, such as the touchscreen "touching" itself, a very high/very low screen sensitivity all of a sudden, the tilting of the screen to one of the four corners of the device and so on and so forth.
With a device so expensive one would expect it to work flawlessly. Seems to me that HTC doesn't think the way we do...