HELP!!!!!!
I have been trying to use my bluetooth gps receiver with my imate jam but cannot get it to work. when I use "autodetect" it can't see it. The software starts up fine but then cannot see the gps receiver. Can anyone hlep my by giving me a step by step on how to connect it.
Thanks
dmcohen said:
HELP!!!!!!
I have been trying to use my bluetooth gps receiver with my imate jam but cannot get it to work. when I use "autodetect" it can't see it. The software starts up fine but then cannot see the gps receiver. Can anyone hlep my by giving me a step by step on how to connect it.
Thanks
Click to expand...
Click to collapse
You have to pair the gps receiver with the phone first
from the jam today screen click on the bluetooth icon then go to Devices choose new let the phone find the gps receiver click on it enter the gps passkey
then configure your navigation software
Hi,
I seem to be having a problem with GPS bluetooth related connections with my Dopod 838 Pro.
Ive paired my Globalsat BT338 receiver and setup an outgoing serial port on my Dopod, and I can use Destinator 6 and TomTom 6 fine (for the time being).
The next day/time when I try to start the GPS applications, both programs report that they cant find the GPS signal/receiver even though its been correctly configured to work previously.
I then have to enter the Bluetooth settings to change and assign another outgoing serial port and reconfigure the GPS applications to the new serial port to work.
The programs and the GPS receiver worked fine with my old iPAQ hx4700 so its not a receiver or program issue.
I'm at my wits end and would appreciate any info on solving this problem.
Thanks in advance.
Delete / unpair your GPS
Make a new pair, and when you assign an outgoing COM port, use a NON secure COM port.
(Deselect the checkbox)
This should work
Rik_053 said:
Delete / unpair your GPS
Make a new pair, and when you assign an outgoing COM port, use a NON secure COM port.
(Deselect the checkbox)
This should work
Click to expand...
Click to collapse
Hi,
Ive been through this unpair / pair scenario more than a few times and Ive never used a secure com port connection.
try destinator PN 6
also make sure you pair BEFORE starting Destinator PN; I spent a whole two days before I Got this to work ... then once it worked .. the answer was actually quite logical
sorry cant remember how i did it as it was months ago when I got and paired my tytn; now I use destinator pn 6
njay22 said:
try destinator PN 6
also make sure you pair BEFORE starting Destinator PN; I spent a whole two days before I Got this to work ... then once it worked .. the answer was actually quite logical
sorry cant remember how i did it as it was months ago when I got and paired my tytn; now I use destinator pn 6
Click to expand...
Click to collapse
Hi,
The pairing has been done before any program was launched.
Im trying with both destinator 6 and tomtom 6
Bluetooth GPS Woes...
Is it the Bluetooth connection you are having problems with or getting a GPS signal. I have this exact setup working fine. What I notice is that often it will take a few minutes for the BT-338 to find enough satellites to provide a GPS signal (green light flashing). The bluetooth should connect immediately regardless of whether the GPS signal is available yet. The blue light on the BT-338 should flash twice as fast as when you first turn it on to tell you that it is connected to a Bluetooth device.
I am using TomTom 6 and it will say no GPS signal or GPS signal lost XX seconds ago. Is this similar to what you are noticing?
clearwave1 said:
Is it the Bluetooth connection you are having problems with or getting a GPS signal. I have this exact setup working fine. What I notice is that often it will take a few minutes for the BT-338 to find enough satellites to provide a GPS signal (green light flashing). The bluetooth should connect immediately regardless of whether the GPS signal is available yet. The blue light on the BT-338 should flash twice as fast as when you first turn it on to tell you that it is connected to a Bluetooth device.
I am using TomTom 6 and it will say no GPS signal or GPS signal lost XX seconds ago. Is this similar to what you are noticing?
Click to expand...
Click to collapse
Hi,
Both the bluetooth reciever and the software work fine and obtain a fix.
the next time the software is started it cant find the reciver and i have to unpair, repair and set a new comm port for it to work.
the gps reciver obtains a fix but the pda cant see it.
Destinator PN has an automatic reconnect tick box on the GPS Settings page. I don't know if D6 or TT have a similar thing. If so, make sure this box is ticked.
I use D PN with a Parrot CK3300 combined handsfree and GPS receiver, and after major stuffing around trying to get D PN set to the correct port initially, it has worked fine since.
Ive sorted the issue out and hopefully this will help others experiencing the same problem.
The problem was that although an outgoing serial port was setup, for some reason it was not mapped to the bluetooth device.
It just specified "COM9" instead of having the bluetooth device "BT338(COM9)" under the bluetooth COM Ports setting.
This seems to be the reason why when the device was unpaired/paired and a com port setup it worked for the time being. After the bluetooth device was disconnected the settings mapping to the device were not retained.
Rambler76,
I am looking to get a GPS unit for my Dopod 838Pro. Which of the two, Destinator or Tom Tom, do you like best?
I know where to get Destinator 6 in Sydney, where does one get Tom Tom 6?
Rambler76 said:
Hi,
the next time the software is started it cant find the reciver and i have to unpair, repair and set a new comm port for it to work.
QUOTE]
Can I ask, with a new com port being asssigned each time you have a problem, when you run out of ports what happens?
Are you able to regain the use of these once assigned ports ? by resetting any settings ?
Does this make any sense?
Thanks for any input ..
Click to expand...
Click to collapse
killabeezz said:
Rambler76 said:
Hi,
the next time the software is started it cant find the reciver and i have to unpair, repair and set a new comm port for it to work.
QUOTE]
Can I ask, with a new com port being asssigned each time you have a problem, when you run out of ports what happens?
Are you able to regain the use of these once assigned ports ? by resetting any settings ?
Does this make any sense?
Thanks for any input ..
Click to expand...
Click to collapse
hi,
what i mean to say is that i switch com ports.
the issue was resolved by mapping the com port to the bluetooth device.
Click to expand...
Click to collapse
Yes I understand what you have done but can I ask again :-
Are you able to regain the use of these once assigned ports ? by resetting any settings ?
Thanks,,
Tom Tom Woes
Hi,
I had the same problem until recently.
To fix I did the following:
Delete pair with GPS receiver,
Create new pair with GPS receiver (put in passkey 0000)
Tick the box for Serial Port
The in Bluetooth Settings -> COM Ports tab, I clicked 'New Outgoing Port'
Selected the GPS unit, and selected Port 4 and unticked the 'Secure' checkbox
Now open TomTom, Select Change Preferences, then Show GPS Status, then Configure, then Other Bluetooth Receiver, then Select COM 4.
Now TT works as it should - turning on and off Bluetooth on Open/Close, and no problems with needing to re-pair.
Previously I had always paired the BT GPS on COM 0 with Secure ticked. This worked the first time only, and I had to re-create the same pair each time I wanted to run the app.
Hope this helps some of you.
(btw I was using TT6 when I found the solution, but I imagine it would have worked for 5 too)
dopod bluetooth problems
Guys I have the same problem with my bluetooth and my dopod. It connects then disconnects.
I have also noticed that the systems unchecks the turn on bluetooth check box and the make this device discoverable to other devices.
Does anyone have any ideas?
Guys I just read this at another forum.
"The Dopod 838 pro and WM5 have chronic problems with the bluetooth stack, which is why everyone is waiting for the new ROM to appear, which will hopefully be WM6. HTC (manufacturers of Dopod 838 pro) announced that the new ROM will fix all of the known problems"
This I learn after having a car accident (minor) in my car playing with the bluetooth and trying to get it to work. Hutchison 3g should only be selling these with a warning.
I assume there is also a problem with the JasJam as they are the same phone.
Knight__Mayor said:
Hi,
To fix I did the following:
The in Bluetooth Settings -> COM Ports tab, I clicked 'New Outgoing Port'
Selected the GPS unit, and selected Port 4 and unticked the 'Secure' checkbox
Click to expand...
Click to collapse
Have to concur with Knight_Mayor. Was having trouble getting a signal/satellite fix using a Holux GPSlim236. Then I set it to COM9 with the "Secure" box unchecked. I had barely closed the window and my M3100 had a fix from inside my house! (tomtom 6 had been running in the background whilst the adjustments were being made)
dabs1 said:
Have to concur with Knight_Mayor. Was having trouble getting a signal/satellite fix using a Holux GPSlim236. Then I set it to COM9 with the "Secure" box unchecked. I had barely closed the window and my M3100 had a fix from inside my house! (tomtom 6 had been running in the background whilst the adjustments were being made)
Click to expand...
Click to collapse
yeah i recon its the screwy MS bluetooth stack, im interested to hear from anyone running tomtom on hermes with the widcomm bluetooth
Tomtom And Gps
I have found that the best cure for gps woes and pocket pc is to use GPS Gate. It make a virtual com port and will always be the same. I have used it always and never have problems connecting.
G
Hi, Need help.
I've just got an xda exec and i wanted to use tomtom on it so i purchased a Holux GPSlim 236 bluetooth receiver to use with it.
I bought this receiver as i saw that someone on ebay had the same set up and said it worked fine.
The problem i have is that the exec will find the gps receiver but will not seem to talk to it, the instructions that came with it say to go through bluetooth manager but on exec there is no bluetooth manager only option to turn on etc.
Pls help
I use the exact same receiver Holux 236.
I just start bluetooth on XDA EXEC then start Holux ..wait 20 seconds ... turn on TomTom wait for about 60 seconds and it works.
The only think to remeber is that when you first pair the Holux with your XDA EXEC you must tick serial port and make sure it is using COM0.
If COM0 is in use by any other bluetooth device. Delete that device, pair the Holux allocating COM0 and then pair the gadget you deleted again and it should work.
Hope this makes sense and works for you.
Holux 236 is a great device so you will be pleased once all working.
I'm half way there
I've paired the device ok. i've selected incoming com as com 0 and turned everything on in that order.
When i go into tomtom to configure the gps i now get the option com 0 but still no joy any ideas.
Cheers
Simon
sounds like it should work. Thats all I did to get it to work.
Is the blue light on Holux flashing ? and the orange light on ?
Go into tomtom , setup a route and see if that helps.
GPS and TomTom
You need the port set up as an OUTGOING post - not an incoming.
Then it should work fine (whatever com# you have got)
Also ensure the name of the BT GPS when paired/found actually ends in "GPS" - then TomTom will find it fine..
Charlie Grillo
Fixed
You truly are a legend, i'm now up and running
Thank you very much
Simon
I often had a problem with BT GPS connections being unreliable, constantly losing a signal and taking upwards of 10 minutes getting a lock again. What I found out is that when setting up the outgoing connection to COM0 is to uncheck the secure connection box. Since I did that I had no connection, stability or drop off issues. It seems the secure connection actually blocks the GPS signal and messes up the receiver. I have used 3 different Holux units (sent back suspect faulty, now I know different), BT-77 and now Zycast. It happened with my mates Holux as well.
If it doesn't help you it may help others with the same problem anyway.
cgrillo said:
You need the port set up as an OUTGOING post - not an incoming.
Then it should work fine (whatever com# you have got)
Also ensure the name of the BT GPS when paired/found actually ends in "GPS" - then TomTom will find it fine..
Charlie Grillo
Click to expand...
Click to collapse
Do you know how to get the XDA EXEC to work with BT GPS
FGPXBT02 as I am really struggling to get this device to work. My phone can see the device in bluetooth but when I run TomTom 5 on the phone the program cannot see the GPS device in the connection.
Any ideas?
Rookie question here: Is it possible to share my Trinity's GPS unit with my Wizard over a Bluetooth connection? Now I don't know if Bluetooth is required to be enabled when using GPS because the Trinity communicates to the GPS unit over BT or if it's just something to get the damn thing working but if it does actually send the GPS data over BT, how would one set the other phone to use this signal?
Thanks.
forcedalias said:
Rookie question here: Is it possible to share my Trinity's GPS unit with my Wizard over a Bluetooth connection? Now I don't know if Bluetooth is required to be enabled when using GPS because the Trinity communicates to the GPS unit over BT or if it's just something to get the damn thing working but if it does actually send the GPS data over BT, how would one set the other phone to use this signal?
Thanks.
Click to expand...
Click to collapse
Try GPSgate http://www.franson.com/gpsgate/
I have shared Trinity's GPS with my laptop before, I don't see any reason why not between two phone.
GPS data is a one way data stream, so you can record it or redirect it to any virtual COM port on any device designed for it.
But I think GPSgate is the only app I can recall that does it nicely.
Also checkout the PocketPC Experts' reviews of GPS software for other possibilities.
V
You may try also GPS2Blue (http://users.skynet.be/hofinger/GPS2Blue.html) - benefits: it's freeware.
Thanks fellas for your wonderful suggestions. I'm looking into them now.
HELLLP upgraded to WM6 on my BA and now my i-Blue GPS reciever wont sync up and TOMTOM cant even see it im gonna scream and cry has anyone got any ideas??? PLEASE PLEASE help
My BA works fine with my GPS receiver (make sure you added it, and assign COM port to the incoming port). Then I use TT6 with COM6 and it works just fine.
Some people uses the GPS application in Settings, but I did not.
now that used to be the case however i no longler have the ability on the menu to choose the BT ports on TT6 i have in this order..
BT UART
SERIAL CABLE ON COM 1
COM 9
IR ON COM 3
and thats it theres some missin:S any ideas??
also its just not syncin up like it used to with Wm2003 Grr
Try to assign to your receiver COM 1 or COM 9
Sometimes it is the GPS application that doesn't know how to use the external GPS management program.
Go to Settings -> Connections -> External GPS, set the two ports to "none" and uncheck the option to manage the ports automatically. Reset the device and try to choose the same port you have chosen at pairing.
I have just finished GPS tutorial for you to know
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardSettings_GPS
Let us know if it helps
kerio said:
I have just finished GPS tutorial for you to know
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM6_WizzardSettings_GPS
Let us know if it helps
Click to expand...
Click to collapse
Wow! it works great man!! thanks kerio (and gang)!!
This is kind of bit off-topic, but since you're talking about bluetooth GPS on a Blue Angel I wanted to ask: how well does it work? As I have do not have any sense of direction at all, I've been thinking about buying a Bluetooth GPS receiver, but can a $35 GPS really be accurate and work well? Will any BT GPS receiver work? What kind of software do you use on the PDA? Thank you!
hi, set the gps hardware port (com6) in the external gps settings. set the new outgoing port in the blutooth settings (com6) and in the TT6 set the com6 in other nmea gps. it works.
Echo9 said:
This is kind of bit off-topic, but since you're talking about bluetooth GPS on a Blue Angel I wanted to ask: how well does it work? As I have do not have any sense of direction at all, I've been thinking about buying a Bluetooth GPS receiver, but can a $35 GPS really be accurate and work well? Will any BT GPS receiver work? What kind of software do you use on the PDA? Thank you!
Click to expand...
Click to collapse
i have a rikalin bluetooth gps and it's working great.
Tomtom 6 and route 66 both working without any problem.
regards stef