Database Users

GPS and TomTom5 Problems

I recently purchased a bluetooth GPS receiver (branded as Fusion with X70 as the name on the back - purchsed from Polstar) and TomTom5 software but cannot get the two to work together.
I have bonded the receiver and set it as COM7 and I can choose that in TomTom5 as the COM port to use but it always says "No GPS Device!"
I have also downloaded and installed the BlueTooth Tools software but this hasn't helped either.
I have an o2 XDA2 and any help with this would be much appreciated.

I think mine is set to BT on com6. You must make sure the GPS receiver has a satellite signal before you try to configure tomtom (flashing light or whatever). Keep trying different settings, that's what I did

I think I have tried all the settings I can, I am beginning to wonder if i've got the correct version of TomTom5 installed! My device information says my platform is PocketPC and that is the version of TomTom5 I installed.
I have tried various settings and soft-rebooted my phone in the meantime after each change and tried without re-setting too!
This is getting rather annoying now

sorry, I'm using com5. Have you made sure you've got a satellite connection first.
Mine is version 5.000

When I turn on my GPS receiver I get two lights flashing, one to indicate that the bluetooth is sending a signal and the other to say that the device is receiving a GPS signal.

Try this...
Hi Dave,
Did you buy this via eBay? Couple of friends have bought from the same guy and neither worked, even though it seemed that they were (flashing lights, bonded etc). Both Polstar/Fuzion.
Anyway, if it won't connect via 'other bluetooth', try selecting 'other cabled device' and then select 4800 baud and your bluetooth com port.
Don't know why, but have had to do this with 3 different PDA's so far (2 XDA, 1 ipaq). It seems to work fine, although the data rate's a bit slow.

Any bluetooth gps I have has installed as com 5 when bonding, it asks if you wish to install serial profile and allocates com 5. I have noticed however that tomtom is very weird with its gps module, it keeps saying gps not found or signal lost etc and then I have to reselect other bluetooth and com 5 and even then sometimes I have to reinitialize the receiver before it is found. I always advocate the use of a wired gps if it is only required for vehicle use, it is less problematic, easy to configure and works 99.999999% of the time without problems.

If you run BT Manager and then check settings, it generally sets up as inbound com5 outbound com 6.
I have a Navman that behaved perfectly on Com 5 on TT3, on TT5 still behaves perfectly, but now uses Com 8 instead.
No idea why, don't really care that much -- it works.

I did buy the items from eBay and I am going to get back to the supplier (Polstar I believe) to see what I can fathom out.
Many thanks for all your advice, I have tried all options but still cannot get it to work so I will post a reply with the solution that works for me and hopefully it will work for others too.

No signal
Hi
the TomTom 5 has a new implementation, from the the TT3. It can manage the bluetooth connection. When you creat the connection with your pocket pc, by serial port, you must creat one connection of paired devices, as you created to your headset, bluethoot, of course. By the way, usually tt5 uses com 6 to connect with gps receivers.
The first time you configure your connection you must stay in position to receive signal from satelites, because its important to record all information from your gps receiver.
Regards

With regards to that marcusmodestus I think tonight, I will try and remove TomTom5 and delete my connection to the receiver and try installing again, from fresh.
Should I bond my reciever before or after I install? And should I run TomTom5 only with the bond in place?

bt gps
I bought one of these
set up as other cable on com5 but set baud rate at 38400 works fine 4 me

Success!
First, thank you all for helping me with this!
I have managed to successfully set it up now and here is the process...
Install TomTom5
Bond the device (I only had the option of Serial COM 7)
In TomTom5, change the preferences to use "Other Cable" and set the baud rate to 4800.
Magically I then get 5-6 satellites, a signal and an annoying American (which I will change to a nice english lady)
Thank you all again!

after hours of trial and error with tomtom5 and buzzmobile5.0 together with a xaiox wonde-xl bluetooth gps mouse (nemerix chipset) i learned the following:
it is recommended that you disable the gps manager of buzzmobile5.0 (not doing this has caused my device hang and auto soft reset some times). after that the following procedure worked for me:
1. pair your bluetooth gps device with your xda
2. assign a free outgoing com-port to that device (what com-port is best? please read text below.)
3. go to tomtom gps settings screen choose other bluetooth gps device
4. the assigned com-port number should appear in the next tomtom screen.
usually you should be done now and the connection should work, but i always had to delete the gps device in buzzmobiles bluetooth connection manager and had to re-pair it again, re-assign the com-port and re-start tomtom in order to get it work.
for any reason i then choosed to assign com8 as com-port for my gps mouse. and from this moment on tomtom5 was able to re-establish connections after switching of and on the gps or after switching xda on and off. i don't know what the exact reason is but choosing com8 was my solution to get tomtom5 working together with my gps on a comfortable way.
hope this helps others
regards
peter

I had this problem with Tomtom 5. No matter what I did it wouldn't work with my receiver.
I found that when I downloaded the 5.1 patch and installed it it worked fine with the GPS receiver set to COM6. Usually takes about 30 secs for the receiver to be found though. I think the update sorted out the Tomtom bluetooth support to a later version.

hi ...
how can i disable the gps manager of buzzmobile5.0?
thx mtc

settings --> system --> GPS
On the access tab uncheck the box
btw : I just saw that GPS hardware port shows com5 now. I'm sure I set both hard and software port to none cause somebody adviced this.
Anyway last week I didn't have to re-pair my gps in order for tomtom to find it ( which before I had to do every time I closed tt5). I've been messing in the registry to create extra com5 ports, maybe that's what caused it.
Anyways I now only have to switch on the gps and fire up tomtom and it immediately shows my position. Hope it will last..........

TTN5 and Universal

I can't get TTN5 to pick up my BT GPS. I think the problem is that I can only seem to be able to assign COM0, COM8 or COM4 in the BT settings dialogue.
TTN5 need 6 or 7 IIRC.
Even though the BT COM ports dialogue allows me to select any COM from 0 to 9. It complains about not being able to create the port if I select anything other than 0, 8 or 4.
Any ideas?

I am having the same issue connecting with my GPS and Destinator 3 s/w.

Try pairing the GPS with your device before loading tomtom, and assign COM0. That's what I did and tomtom picked up the device immediately without problems.
Having said that my GPS is a tomtom.

Can't install TT5... any suggestion?
I get an error and than installation quits...

you have to connect through COM5. At least it works for me.
Strange enough, now Tomtom doesn't show this port anymore, so they day they unpair, I'm screwed.

I have the same problem. I can only select com 0, 4 or 8 and none of these ports show up in TT5. I am unable to make it work. I even tried ti activate the GPS control panel (http://forum.xda-developers.com/viewtopic.php?p=154825#154825) but it seems this control panel does actually not work (probably why it was hidden in the first place).
Any suggestions to make TT5 work are very welcome.

Some how (no idea how), TT5 was working with the GPS. Yeterday I had to hard reset due to several reasons, I now, again, I cannot manage to connect the damn bluetooth GPS.
Same reason as always: NO COM5 in TT5.
Damn!

Guys now I am really stuck! I have been messing about with the registry, this is what i have found; COM6 friendly name is RIL (radio something or another I think basically the phone etc…) I have changed that to another port (HKLM\Drivers\BuilIn\Serial….) changing the index to another port i.e. a free one like 0/4/8 upon reboot allows me to map port 6 to BT gps under MSBT stack; however the phone (radio) stops functioning although BT serial port has been assigned to 6 TT5 still does not start the connection! Looking through the reg under HKLM\Drivers\BuiltIn\serial_BTUR this is the default BT serial port; this is set to port 7 (Index) if you change that port to something other than 7 reboot BT stops working. I have loaded the old TT3.7 GPS driver/software (Not complete TT3 just the gps update) and I can connect and communicate with the BT GPS. The BT GPS is seen as BT GPS. I can leave it connected however as soon as I fire up TT5 still no GPS communication. Tried to get TT5 working for over a week and have still failed. I think we need to find how TT5 detects available ports and edit/hack that area. There is on thing I have noticed though; if I select TomTom GPS there appears to be some BT communication although no thing on the GPS screen the BT light on my GPS unit (Fortuna) flickers periodically. Seriously stuck any help greatly appreciated as I am currently running out of ideas…..

Guys now I am really stuck! I have been messing about with the registry, this is what i have found; COM6 friendly name is RIL (radio something or another I think basically the phone etc…) I have changed that to another port (HKLM\Drivers\BuilIn\Serial….) changing the index to another port i.e. a free one like 0/4/8 upon reboot allows me to map port 6 to BT gps under MSBT stack; however the phone (radio) stops functioning although BT serial port has been assigned to 6 TT5 still does not start the connection! Looking through the reg under HKLM\Drivers\BuiltIn\serial_BTUR this is the default BT serial port; this is set to port 7 (Index) if you change that port to something other than 7 reboot BT stops working. I have loaded the old TT3.7 GPS driver/software (Not complete TT3 just the gps update) and I can connect and communicate with the BT GPS. The BT GPS is seen as BT GPS. I can leave it connected however as soon as I fire up TT5 still no GPS communication. Tried to get TT5 working for over a week and have still failed. I think we need to find how TT5 detects available ports and edit/hack that area. There is on thing I have noticed though; if I select TomTom GPS there appears to be some BT communication although no thing on the GPS screen the BT light on my GPS unit (Fortuna) flickers periodically. Seriously stuck any help greatly appreciated as I am currently running out of ideas….. I Think there is only one Man that maybe able to help; ITSME help please!

I've completely given up. I've spent most of the day hacking the registry to COM5, with multiple combinations on the GPS control panel, etc... with no success.
I've hard reseted the device and I won't install TT5 until someone figures out how to connect it to a Bluetooth GPS.
I can't believe such a new device hasn't sorted out a simple connection to a Bluetooth GPS.

Well... not yet.
I've been able to set up TT5 working with my old Bluetooth GPS, but it doesn't work with my new Syson Blue Sirf III. Have no idea why, maybe someone can lighten me up.
Anyway, this is what I've done for non SIRF III and it works for me.
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In BT, select the OUTGOING port to 8.
3. In the GPS control panel, select the GPS program to 0 and make sure that the hardware one, is set to None.
4. Start TT5 and and the GPS settings, select another bluetooth GPS, and you will see COM 0 free. Select COM 0 and close TT5.
5. At the GPS control panel again, now select COM 8 (before we set it up at 0).
6. At BT: select OUTGOING port to 0.
7. Back again to GPS control panel and select NONE.
8. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
Hope it works for everybody.
Now, how to make it work in SIRF III - no idea. I've made the same process with the Sirf III GPS and it doesn't connect.

Success!!!!
You sir, are a genius.
I salute you.

I've got a Fortuna Clip on and it sucks
They had to screw us again with the BT stack. Morons. It is abslutely impossible to set this baby up with TT5. I got TT5 to work on the Magician, and the XDA 2, but this, abosulutely beats me. It seems Tomtom barely let's me choose any ports...lost

Top Man andreuroig
Thanks andreuroig your a top mman Just got it working on Fortuna Clipon BT GPS; Can I pick your brains about maybe trying to install the WIDCOM BT stack on the universal; have tried manually hacking away at this; but have given up now....

mikeycollins13
hi mikeycollins13 wrote
It is abslutely impossible to set this baby up with TT5. I got TT5 to work on the Magician, and the XDA 2, but this, abosulutely beats me. It seems Tomtom barely let's me choose any ports...lost.
I agree Have tried andreuroig way, I can´t get a com0 in tomtom ,
Please help.
:?

MIracle, got it to work. Clip on + tt 5.1
This how I did it:
1.) IN BT settings, (After having paired and chosen 'Serial', went to COM ports and selected 0
2.) Then, from inside tt5, went to gps...picked the 'other BT', it ehn showed IR ports, serial cable etc, Port 7 (no use, couldn't do much) and THEN Com port 0. Clicked that and it worked.
Done
PM if you need help

slight subject change, but.... JasJar, Tomtom 5.1.......slight twist
possible to have the 100mb GB map stored on the phone, so to use a SD GPS Card?, Due to the new memory layout of the phone this could be an issue.
I have that and TTN3 was ok with the 32mb map in, but since 5.1 you cant have smaller than GB 105mb, so im stuck on TTN3 for SD GPS unit and TTN5 for the, err not yet purchased BT GPS unit,
Some sort of map cutter would be nice,
Ive ordered my Jasjar but waiting for the post,
What i really what to know is, do i put the SD GPS unit on ebay now and recoupe some losses having to get a bluetooth unit or not ????
TiA

Jasjar, BT GPS and TT V5.1
Some people here state that they installed TT V5.1. Actually V5.1 is an upgrade that can be downloaded from the TT support site. It requires V5 as a basis. BUT the V5.1 only comes in EXE format (no CAB fiile) so I wonder how you guys were able to get 5.1 installed as the setup program crashes as soon as it connects to Activesync 4.0 or 4.1.
?

you have to copy the 5.0 cab files across, then run them and it installs that way,
then just the 5.1 ugrade to copy across

faisal.husain: no idea about how to install de Widcom BT. That is out of my league.
JoseF:
Start from zero. Erase your bond with your GPS. Start TT5 and select any port that you have free (COM7 or even Serial on COM1).
Pair your GPS and follow the steps I've mentioned. It should work, but only, if it's not a non SIRF III gps.

GPS in settings, tomtom problem

I am trying to set up tomtom 5.21 with my BTGPS74 receiver but cant get the two to communicate. I know there is some settings you can change in settings/system/gps but the problem I have is I dont have the gps option in settings anywhere. Am I missing something? Does any on know what I should do. Tomtom wants me to use port 3 or 7 but when I try to set them in bluetooth settings it says its not possible check your settings. Any suggestions would b welcome. Thanks.
P.S I know the receiver works as it still works well with my N70.

...you should've gotten a GPS icon if software GPS recognized.
In rgister you can force simulation.
hklm\controlpanel\gps]
delete redirect and add 'group' with dword=2
Then GPS icon will appear.
I gave it programport 7,hardware 6, baudrate=57600
gps auto checked
I'm not sure about the settings...

I had to create incomming and outgoing com ports on my 3100 (not sure if you need both)??
TomTom used com port 9 and works like a dream
as soon as you start the programme it connects automatically as long as my receiver is on.
It even connects when the BT on the 3100 is turned off - it starts the BT automaticlally when tomtom runs!

Yeah i agree all you need to do is set up the com ports, then fire up tomtom and select the com port you just set up and away it goes
Chris

Thanks for the replies guys. I know I have to set the com ports but the problem I have is there is nowhere for me to do this. For some reason the gps settings is missing from the system/settings. I am going to try to reinstall tomtom to see if it helps. Tomtom has ports 3 and 7 showing but they seem to be taken by something else so I cant configure my receiver on either of them.

I have a slightly different problem... my TyTn can connect to the BT GPS reciever, but as soon as TomTom tries to calculate a route, or I click the GPS signal icon it crashes back to the Today screen...
I've got TomTom installed with 5.21 update, anyone had any problems like this?

you just need to pair your bluetooth device go to settings connections and bluetooth and add new device, let your tytn search and it will find a new device when you have paired it select new comm port outgoing
I have no gps setting in control panel either
Cheers
Chris

Hi,
i have a strange problem with my BT. I cant create a incoming or outgoing BT port. I dont know why but it wont let me create any ports.
Anyone with the same odd problem?

I had a similar problem, Tytn would only let me choose COM0 (Zero) as outgoing port, and TT works fine with it. However, I would like to add Mapking for Asia, and this navi soft will not accept a GPS on COM0. Anybody understands why Tytn is only offering COM0 as outgoing ports for GPS?

I have set the com4 as outgoing port and now tomtom seems to work fine.

thanks for that info.
I don't know why only port 0 and all other ports are blocked but TT works for me now. I only need to wait for a better ROM and i can leave my Wizard home

I have written to a good contact at HTC since I need COM ports other than 0 for Asian Mapking navi soft (in add. to TT) . Will keep you posted.

Answer from HTC:
"As my testing, the Outgoing port is not limited with COM0. PaPaGo can accept with COM0, COM2, COM4, COM8, and COM9. I think the limitation of COM0 is the software limitation of TOMTOM, So if the user wants to use Mapking that only support COM1~7, he need delete the outgoing port COM0, and reassign another COM port for the BT GPS."
I imagine the problem lies between the Tytn and TomTom only, and other navi soft would find other COM ports. But I am kind of hesitant to interfere with a working TomTom, and go through the outgoing COM port game again...

I'm using Navigon and set up an outgoing Connection on com2 and it works fine for me.
sounds like TT is the problem ...
greetz
sphings

Guys, let me try to help you a little bit, as I work in navigation software development (Destinator).
1. The COM ports has nothing to do with the actual software you are running. This is pre-defined in the ROM you are using. That is also the reason why we see variations here - we use different ROMs.
2. In order of enabling a COM port, you do NOT need to discover the GPS icon on the settings. It is quite useless unless you wish to work simultaniusly with more than one software.
3. To enable a COM port, after you pair the GPS, look down for the tab COM Ports in the BT settings Manager. You only need to create Outgoing COM.
4. Strange but usually you will only be able to choose between 2 COM ports. The rest are hidden by the OS. MAKE SURE that you disabled the "Secure Connections". Default key for all the GPS receivers is "0000" and for Globalsat 308 is "2003". The last is AKA HP GPS.
5. If you cannot enable any other COM port than COM0, this is a ROM problem and you should contact your ROM provider like the mobile carrier. You can also try to enable other COM ports with the attached CAB file. Simply run it, it will expose all COM ports for you and now you should start trying. I reccomend to test COMs 4-8 first, normally, it will solve your problems. (Note: I got this file previously here and did not create it myself).

There have been may posts about TomTom not recognising B GPS's.
One solution that doesnlt seem to be mentioned here id to ensure that the name of the GPs in BT connections actually ends in "GPS"..
If it doesn;t renove the pairing and re-pari , but change the name this time to something that ends in "GPS"...
good luck
Charlie Grillo

Thanks guys, found another solution that works for me now:
1) Set your Bluetooth GPS to another COM port than 0 (TomTom´s standard port 6 was not available, so I choose 2)
2) open Programs/Navigator/navigator.cfg with a text editor, change COM0 to COM2
3) start TomTom - working on COM 2!
Started Mapking, found COM 2 - working now.

hello fellas,
as you can see im new here. im thinking of buying the TYTN, a sector which i have never explored before (pda sector).
it sounds great with the applications and due to my work, a need for a pda is becoming bigger.
i posted in this message due to the GPS topic.
i got a very stupid question which you may recieve occasionally if i buy the tytn.. :twisted:
why do a person need BT enabled GPS? i read you can connect it to your PDA but for what reason?
thanks in advance and apologies for any inconvience..

@D_G - welcome to this board
In order to run navigation software on your Tytn you need a external GPS connected to it. Easiest solution is a external GPS connected via Bluetooth.
Another solution would be to buy a PDA phone with a GPS receiver on board, for example the ETen G500.
Of course we would all be interested in a UMTS PDA with integrated GPS, with acceptable battery life, but that will take some time...

thanks lucas for the answer. but why would you need a navigation software if you have a GPS device? in either case you will need to have both devices in a particula blue tooth range. right?
this means you will need your handheld device + the GPS to activate the navigation software, or dd I miss something?!

TYTN TomTom Bluetooth GPS

Got my htc tytn loaded totom 5 onto it and guess what bluetooth gps doesn't work with it! Cannot get correct comm port .According to HTC TomTom know about this. Just hoping somebody already has a fix for this?

Had no problems pairing my BT Slim GPS with my Vario II, TomTom runs fine.
What GPS receiver you using ?

works fine on my xda trion as well.......im using tom tom 5.21 with BT-338 gps receiver.......im also using com port 0......you basically have to pair it and then add outgoing port as com port 0.....and during the installation on tom tom make sure you choose com port 0......that worked for me anyways....hope that helps.

Bluetooth GPS HTC TYTN
Thanks guys have re-installed tomtom and now it comes up with com prt 0.Probably didn't install correctly first time .Now up and running .Fantastic!!!!

I could cry
Hi everyone - I am having a similar problem
I have a new GPS receiver and have established a bluetooth partnership and done the outgoing port to com0 which is the default.
Tom Tom is installed and when I try and configure it I am not seeing all the options shown on the website. It just says no gps detected or something similar. I am sure its something simple.
Can anyone help please?

mobilecat said:
Hi everyone - I am having a similar problem
I have a new GPS receiver and have established a bluetooth partnership and done the outgoing port to com0 which is the default.
Tom Tom is installed and when I try and configure it I am not seeing all the options shown on the website. It just says no gps detected or something similar. I am sure its something simple.
Can anyone help please?
Click to expand...
Click to collapse
There's a program CreatePorts that is floating around (you'll have to do a search) that allows TomTom to see additional com ports in the Bluetooth GPS setup. I used this same program on my Samsung i730, and now on the 8525.
You just paid your GPS with the PPC, create the outbound port (in my case I used com 2), run CreatePorts, and then go in to TomTom GPS setup.
Once you get it set up, you don't have to run the app anymore, and TomTom works great

OUCH
dew.man said:
There's a program CreatePorts that is floating around (you'll have to do a search) that allows TomTom to see additional com ports in the Bluetooth GPS setup. I used this same program on my Samsung i730, and now on the 8525.
You just paid your GPS with the PPC, create the outbound port (in my case I used com 2), run CreatePorts, and then go in to TomTom GPS setup.
Once you get it set up, you don't have to run the app anymore, and TomTom works great
Click to expand...
Click to collapse
I tried running this but i can still only assign certain points from my bluetooth manager and dont have these displayed on the tomtom menu.

When you go into the GPS Status settings on Tomtom and tap configure, have you tried looking to see which com ports it lists and then going back to the bluetooth settings and doing trial and error to allocate any of those port numbers as an outgoing port for your GPS unit?
For my genuine Tomtom GPS unit, I did not even have to set up a port, I just had to pair the device but when I used a friends alternative brand of GPS unit for a short while, I was only able to get that one working under Com port 4. I can't quite remember but it may even have been a case that Com 4 only became visible in the Tomtom GPS configure menu after I had allocated it as an outgoing port for the GPS device (sorry, it is a while back so I can't quite remember the order in which I set it up)
Hope you get it sorted

arghh
I a so annoyed. I did this and had no luck. Later on I did something and got the option for port 2 and used it and it was great. I had to do a soft reset for something else and I cant do it again. tried everything.

MMMM
Happy yet frustrated
I have deleted create ports from my device as it only works once. I have reset my device. I reinstalled createports and extracted the file. I then saw port 2 straight away - the one that had been missing in tomtom.
The only problem is that if I do a soft reset I have to do that again!

It is very frustrating trying to get some of these things working. Have you thought about upgrading to Tomtom 6? you may find you have less problems getting the pairing and ports working right.
Failing that, I am sure you will be able to get it working again, just keep trying all the com ports one by one until you find one that appears in the Tomtom configuration. Like I said, on my XDA Vario II (Hermes) I managed to get it working on Com 4 and when I had an XDA Mini S (Wizard) I seem to remember that it was either Com 6 or Com 7 which worked on that one.
You might want to check the bluetooth settings for security and beam as well. Try turning security off (ie. passkey required off) and make sure the beam setting is ticked to receive all incoming beams.
I will keep my fingers crossed for you

download co-pilot for uk
Dashley said:
Got my htc tytn loaded totom 5 onto it and guess what bluetooth gps doesn't work with it! Cannot get correct comm port .According to HTC TomTom know about this. Just hoping somebody already has a fix for this?
Click to expand...
Click to collapse
Any one got the co-pilot softwear to insallate for MDA VARIO 2.

download co-pilot softwear for UK.
Any one got the co-pilot softwear to insallate for MDA VARIO 2.

another thread
I have just seen another thread about XDA with a patch for this that seems to work. Can someone merge the threads?

Createports
Can anyone point me in the right direction to find this program. I think that it is hidden on the web somewhere near the holy grail.

Help with TT6 + TYTN + Royaltek 2110 please
I have a TYTN and a GPS Royaltek 2110. I have position com0 and other programs GPS work correctly. The problem is that the TT6 always shows he himself message “GPS nonfound”, although always I can say to him that this in the COM0 but does not find satellite.
That I can do? I put the TT5
somebody it has the CreatePorts program and it can put it?
Thanks

try this thread:-
http://forum.xda-developers.com/showthread.php?t=288865

Pairing TOMTOM 6 with Bluetooth GPS
For all of you that are having problems pairing your GPS Bluetooth receiver with your Hermes see the instruction set below:
#Hermes can not be in flight Mode#
1st: Run BTHTools1100.exe
--------------------------------------------------------------------------------------------------
2nd:
Pair them in Bluetooth Manager
Set:
Holux (outgoing port com4)
Incoming Port (com8)
no security
------------------------------------------------
3rd:
In settings >> Connections >> GPS
Programs set GPS program port to Com 8
Hardware set GPS hardware port to Com 4
baud rate 4800
If GPS program is not seen in settings\Connections
Use resco registry or other program and:
Go to Hkey_local_Machine\ControlPanel\GPS settings\ creat (make new) "Group" with Dword data =2
---------------------------------------------------------------------------------------------------
In TomTom chose:
Bluetooth GPS
Com4
should be working Now

Pairing TOMTOM 6 with Bluetooth GPS (easy) - Kaiser
First after reading the posts I thought I had to reinstall Tom Tom or install another software. Luckily, I paused and read the message when I was about to configure my other bluetooth receiver. It said, first you must establish your bluetooth connection. Well, I lied coz I did try to go on and couldnt find COM 0 or whatever you guys have said.
But that's what I did, eventually. Paired the device as BT GPS, check the serial connection (not sure if secure connection needs to be checked but I left it unchecked to find out later). After that go to com port tab, and click add new port ie selected COM0.
Then go back to TT6 (restarted in my case), and to other bluetooth gps receiver then found COM 0 in there. Voila!!
Chose COM0, but still got no gps device message. Waited for about 2 mins while reading further into the posts and now my TT6 is working.
You could call that strike of luck I dont really care but yeah.. saving some batt power on my kaiser for the bank holiday;s trip. Have a great one everyone!!
P/s: Mine is O2 stellar on Dutty's great work.

Com 4 is the only one that works with Schaps 3.54

Tomtom 6 installed, by no GPS?

I've just installed tomtom 6 on my pda and also got it all paired up with by bluetooth gps. Also opened com0 as an outgoing port. I can see in the gps status screen the little yellow and blue circle going round, but i cant seem to pick up any sattelites, have kept in the same position for over 40mins. I used the same gps unit on my old MDA III pda and it worked perfect.
Is there anything else i need to do?

You could try downloading and trying VisualGPSce or summat to test the output from the GPS BT unit, just in case it's a TT issue.
You might even have some sort of other SW on your PPC confirming the information received from your BT GPS

Have tried the above program but dont get any response from it. Not too sure what the problem could be.
Anyone else with a similar issue?

So you've switched on your bluetooth gps unit and paired the two, and you know that's all working. Except that no gps unit can see it?

I've paired up my Vario II with the GPS unit. Opened and outgoing Com port (i've tried com0 and com4). Now i start tomtom through preeference etc i select the correct com port. Now the yellow/black icon starts to move, but even after an hour of standing in one place in the open air i dont get any gps response.
And i used the same gps unit on TT5.

Connecting a non-tomtom gps to tomtom 6
1. You need to pair your bluetooth GPS to your TYTn
2. you need to connect it to a com-port (take a high port like 9)
3. start tomtom and set a non-tomtom bluetooth gps at com 9
thats it.

hmmm, i've tried the above too on com9 but no change. The gps device does work as it worked with TT5.

ump001 said:
hmmm, i've tried the above too on com9 but no change. The gps device does work as it worked with TT5.
Click to expand...
Click to collapse
My be the GPS device is faulty... test with another app, test with windows mobile live search maps, is freeware http://wls.live.com/

My COM Settings
As a novice, I went through a lot of trial and error before getting my GPS to work.
My COM Ports settings now work fine:
BT GPS (COM9)
Incoming Port (COM2)
Have you set an incoming as well as an outgoing port? Maybe a silly question.

beam
try turning off beam receive all incoming beams this makes it work on xda1 this might help

Time has come said:
As a novice, I went through a lot of trial and error before getting my GPS to work.
My COM Ports settings now work fine:
BT GPS (COM9)
Incoming Port (COM2)
Have you set an incoming as well as an outgoing port? Maybe a silly question.
Click to expand...
Click to collapse
You shouldn't need an incoming port.. only outgoing.. (at least on the 10 or so BT GPS unit's ive tried none have needed it)
==========
(Also note on the hermes you cant use COM8 reliably as it messes with the USB Modem options as they seem to use COM8 internally so stay clear of that one)
VisualGPSce doesnt seem to work properly on my hermes.. I use free.mytracking.net's client to test gps easily.. just set the right com port and hit start.. ignore the user/pass bit as thats not important.. if you have a good signal you will get a green bar and number of satellites if communications are working and a red bar and 0 satellites if they are not.

Make sure you do not have the "secure connection" box ticked in port settings, otherwise you will not connect.

Tytn has an interesting feature: To pick up a satellite signal with TomTom 6 the radio of the Tytn must be switched ON. If the radio is switched off no signal is beeing received from the bluethooth device.

Thanks
char05 said:
Tytn has an interesting feature: To pick up a satellite signal with TomTom 6 the radio of the Tytn must be switched ON. If the radio is switched off no signal is beeing received from the bluethooth device.
Click to expand...
Click to collapse
Configured lots of tomtom and GPS. Paired, outgoing, no secure, etc. I Know how.
Flashed to WM6 and spent all the afternoon till I read this thread.
Almost fool!
Thanks a lot, man!!