Database Users

TTN5 and Universal

I can't get TTN5 to pick up my BT GPS. I think the problem is that I can only seem to be able to assign COM0, COM8 or COM4 in the BT settings dialogue.
TTN5 need 6 or 7 IIRC.
Even though the BT COM ports dialogue allows me to select any COM from 0 to 9. It complains about not being able to create the port if I select anything other than 0, 8 or 4.
Any ideas?

I am having the same issue connecting with my GPS and Destinator 3 s/w.

Try pairing the GPS with your device before loading tomtom, and assign COM0. That's what I did and tomtom picked up the device immediately without problems.
Having said that my GPS is a tomtom.

Can't install TT5... any suggestion?
I get an error and than installation quits...

you have to connect through COM5. At least it works for me.
Strange enough, now Tomtom doesn't show this port anymore, so they day they unpair, I'm screwed.

I have the same problem. I can only select com 0, 4 or 8 and none of these ports show up in TT5. I am unable to make it work. I even tried ti activate the GPS control panel (http://forum.xda-developers.com/viewtopic.php?p=154825#154825) but it seems this control panel does actually not work (probably why it was hidden in the first place).
Any suggestions to make TT5 work are very welcome.

Some how (no idea how), TT5 was working with the GPS. Yeterday I had to hard reset due to several reasons, I now, again, I cannot manage to connect the damn bluetooth GPS.
Same reason as always: NO COM5 in TT5.
Damn!

Guys now I am really stuck! I have been messing about with the registry, this is what i have found; COM6 friendly name is RIL (radio something or another I think basically the phone etc…) I have changed that to another port (HKLM\Drivers\BuilIn\Serial….) changing the index to another port i.e. a free one like 0/4/8 upon reboot allows me to map port 6 to BT gps under MSBT stack; however the phone (radio) stops functioning although BT serial port has been assigned to 6 TT5 still does not start the connection! Looking through the reg under HKLM\Drivers\BuiltIn\serial_BTUR this is the default BT serial port; this is set to port 7 (Index) if you change that port to something other than 7 reboot BT stops working. I have loaded the old TT3.7 GPS driver/software (Not complete TT3 just the gps update) and I can connect and communicate with the BT GPS. The BT GPS is seen as BT GPS. I can leave it connected however as soon as I fire up TT5 still no GPS communication. Tried to get TT5 working for over a week and have still failed. I think we need to find how TT5 detects available ports and edit/hack that area. There is on thing I have noticed though; if I select TomTom GPS there appears to be some BT communication although no thing on the GPS screen the BT light on my GPS unit (Fortuna) flickers periodically. Seriously stuck any help greatly appreciated as I am currently running out of ideas…..

Guys now I am really stuck! I have been messing about with the registry, this is what i have found; COM6 friendly name is RIL (radio something or another I think basically the phone etc…) I have changed that to another port (HKLM\Drivers\BuilIn\Serial….) changing the index to another port i.e. a free one like 0/4/8 upon reboot allows me to map port 6 to BT gps under MSBT stack; however the phone (radio) stops functioning although BT serial port has been assigned to 6 TT5 still does not start the connection! Looking through the reg under HKLM\Drivers\BuiltIn\serial_BTUR this is the default BT serial port; this is set to port 7 (Index) if you change that port to something other than 7 reboot BT stops working. I have loaded the old TT3.7 GPS driver/software (Not complete TT3 just the gps update) and I can connect and communicate with the BT GPS. The BT GPS is seen as BT GPS. I can leave it connected however as soon as I fire up TT5 still no GPS communication. Tried to get TT5 working for over a week and have still failed. I think we need to find how TT5 detects available ports and edit/hack that area. There is on thing I have noticed though; if I select TomTom GPS there appears to be some BT communication although no thing on the GPS screen the BT light on my GPS unit (Fortuna) flickers periodically. Seriously stuck any help greatly appreciated as I am currently running out of ideas….. I Think there is only one Man that maybe able to help; ITSME help please!

I've completely given up. I've spent most of the day hacking the registry to COM5, with multiple combinations on the GPS control panel, etc... with no success.
I've hard reseted the device and I won't install TT5 until someone figures out how to connect it to a Bluetooth GPS.
I can't believe such a new device hasn't sorted out a simple connection to a Bluetooth GPS.

Well... not yet.
I've been able to set up TT5 working with my old Bluetooth GPS, but it doesn't work with my new Syson Blue Sirf III. Have no idea why, maybe someone can lighten me up.
Anyway, this is what I've done for non SIRF III and it works for me.
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In BT, select the OUTGOING port to 8.
3. In the GPS control panel, select the GPS program to 0 and make sure that the hardware one, is set to None.
4. Start TT5 and and the GPS settings, select another bluetooth GPS, and you will see COM 0 free. Select COM 0 and close TT5.
5. At the GPS control panel again, now select COM 8 (before we set it up at 0).
6. At BT: select OUTGOING port to 0.
7. Back again to GPS control panel and select NONE.
8. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
Hope it works for everybody.
Now, how to make it work in SIRF III - no idea. I've made the same process with the Sirf III GPS and it doesn't connect.

Success!!!!
You sir, are a genius.
I salute you.

I've got a Fortuna Clip on and it sucks
They had to screw us again with the BT stack. Morons. It is abslutely impossible to set this baby up with TT5. I got TT5 to work on the Magician, and the XDA 2, but this, abosulutely beats me. It seems Tomtom barely let's me choose any ports...lost

Top Man andreuroig
Thanks andreuroig your a top mman Just got it working on Fortuna Clipon BT GPS; Can I pick your brains about maybe trying to install the WIDCOM BT stack on the universal; have tried manually hacking away at this; but have given up now....

mikeycollins13
hi mikeycollins13 wrote
It is abslutely impossible to set this baby up with TT5. I got TT5 to work on the Magician, and the XDA 2, but this, abosulutely beats me. It seems Tomtom barely let's me choose any ports...lost.
I agree Have tried andreuroig way, I can´t get a com0 in tomtom ,
Please help.
:?

MIracle, got it to work. Clip on + tt 5.1
This how I did it:
1.) IN BT settings, (After having paired and chosen 'Serial', went to COM ports and selected 0
2.) Then, from inside tt5, went to gps...picked the 'other BT', it ehn showed IR ports, serial cable etc, Port 7 (no use, couldn't do much) and THEN Com port 0. Clicked that and it worked.
Done
PM if you need help

slight subject change, but.... JasJar, Tomtom 5.1.......slight twist
possible to have the 100mb GB map stored on the phone, so to use a SD GPS Card?, Due to the new memory layout of the phone this could be an issue.
I have that and TTN3 was ok with the 32mb map in, but since 5.1 you cant have smaller than GB 105mb, so im stuck on TTN3 for SD GPS unit and TTN5 for the, err not yet purchased BT GPS unit,
Some sort of map cutter would be nice,
Ive ordered my Jasjar but waiting for the post,
What i really what to know is, do i put the SD GPS unit on ebay now and recoupe some losses having to get a bluetooth unit or not ????
TiA

Jasjar, BT GPS and TT V5.1
Some people here state that they installed TT V5.1. Actually V5.1 is an upgrade that can be downloaded from the TT support site. It requires V5 as a basis. BUT the V5.1 only comes in EXE format (no CAB fiile) so I wonder how you guys were able to get 5.1 installed as the setup program crashes as soon as it connects to Activesync 4.0 or 4.1.
?

you have to copy the 5.0 cab files across, then run them and it installs that way,
then just the 5.1 ugrade to copy across

faisal.husain: no idea about how to install de Widcom BT. That is out of my league.
JoseF:
Start from zero. Erase your bond with your GPS. Start TT5 and select any port that you have free (COM7 or even Serial on COM1).
Pair your GPS and follow the steps I've mentioned. It should work, but only, if it's not a non SIRF III gps.

GPS+ TomTom5 problems with new Blutooth Stack

When I first tried installing this stack (see here: http://forum.xda-developers.com/viewtopic.php?t=33532 ) my exisiting bluetooth devices - a Jabra BT200 headset and Ambeon GPS both worked, just like that - without re-pairing, the latter with TomTom3.
However, in order to make stereo over A2DP to work I had to hard-reset and reinstall everything. Glad to say A2DP did work! However took opportunity to upgrade from TomTom3 to TomTom5.
Now I've re-paired with the GPS using the new stack, during which it asks if I want ti install a serial port. But it doesn't seem to be recognised by TomTom. And, if I go to the COM tab, and try and add a new port there is nothing in the drop down.
Any ideas?

The BT outgoing port on my magician is fixed at Com5. Maybe because I am using GPS Gate (a program to create virtual Com port so that U can open 2 or more GPS program at the same time), I don't have any problem before and after installing that BT stack.
Maybe U can try GPS Gate too. Just open Com5 in GPS gate and create an virtual port Com6. Then ask TT to connection to Com6.

Thanks but it's all OK
I used this great little free program
http://www.teletype.com/downloads/tty.zip
to test whether the GPS box was actually connected (but not recognised by TomTom) and it was - on COM5!
So I pocked around with TomTom some more, and found that it could pick up a signal on COM5 but if a signal was not there it reported that 'No GPS device' rather than 'No valid GPS signal.'

upgrade tomtom 5 to tomtom 5.1 :wink:

GideonS, did you get BT outgoing port to show up? If so, how? Like you, when I try to select one, it comes up with a blank selector box.
(Maybe I missed something in the thread, but the GPS Gate surely relies on diverting an existing port?)
thanks in advance!

Re: Thanks but it's all OK
GideonS said:
I used this great little free program
http://www.teletype.com/downloads/tty.zip
to test whether the GPS box was actually connected (but not recognised by TomTom) and it was - on COM5!
So I pocked around with TomTom some more, and found that it could pick up a signal on COM5 but if a signal was not there it reported that 'No GPS device' rather than 'No valid GPS signal.'
Click to expand...
Click to collapse
my tt5 5.21 (5430) + iberia plus 6.3.2 don't recognize my Socket GPS (http://www.socketcom.com/product/GP0820-521.asp)
i used that program you mencioned and it receives data on COM8 as defined by me
i'm at home and i never get a fix inside so i can't test if it's the same situation of the error messages switch
when i do, i'll post the result

Tom Tom XDA problem

Hi all,
Just go the xda through work, and even though i have got the new version of tom tom of their website (5.2) for ppc, when loaded and docked in my cradle, it cant sem to get the GPS to receive!?!?! anyone else had this problem?

I have an O2 XDA Exec and its working fine with the TomTom 5.2 software. I got some very useful info from http://www.pocketgps.co.uk/modules.php?name=Forums&file=viewforum&f=6 ..... basically a post on there advised setting up an outgoing com port to the BT GPS device (I used Com0) ... this is found under Start>Settings>Connections>Bluetooth>ComPorts (after you have paired the BT device of course).
In TomTom you then select "Other Bluetooth GPS" in the GPS options screen, select the Com port set previously, and away you go.
I hope this helps

I bought a 32-channel QStarz GPS receiver from eBay, cracking little thing it is. I had problems getting it going though initially - what I had to do was setup a pairing, which was a little tricky as TT didn't want to behave.
Basically, TT tries to establish a serial connection whenever I open it. As TT loaded, just before it went into the TT interface, It showed a dialog box with all my serial connections in - I think it might've been the device pairing screen, but I've not been able to find it again... What I did was pick the gps receiver's serial port device entry I'd previously set up, select it, check the box to tell TT to always connect to this device by default, and then hit enter - all before TT managed to load into the interface. It took me a couple of goes, and I'm sure there's an easier way to do this (I don't think I was even supposed to see this dialog screen ) but now it works perfectly. I don't have to establish the Bluetooth connection to the GPS receiver, TT does that (and it'll even turn the Bluetooth on and off if it's not already on for me). However, I did have to choose Other NMEA GPS from the device options, and then tweak my COM port settings (I found a scant piece of information regardingthe fact that it should be something like COM5 for incoming data and COM6 for outgoing data, you would do well to doublecheck the TomTom site's FAQs for this info). There's a couple of seconds lag whilst TT correctly detects the device and begins to latch onto GPS sats (it says "No Compatible GPS Device Detected!", and then changes to something like "No GPS Signal Detected"... And then starts picking up sats.
This is all with TT5.0, by the way.

This document will be very useful.. principal is the same for most GPS Receivers..
http://www.parrot.biz/ressources/CK3400_Help_Files/Imate JASJAR - TOMTOM Mobile 5 - 2.01.pdf

Not sure if you are trying to receive through a Bluetooth GPS receiver - if you are, this worked for me (first poston the page);
http://forum.xda-developers.com/vie...ostorder=asc&highlight=tomtom+5+gps&start=100

Thanks for your help guys, but i meat to say i am using a wired GPS the small square official Tom Tom one, hard wired in to my cradle.
I can open the software and everything, but it just says, cant find GPS, the green light flashes on my GPS, but thats all it does.
Help!

Ok, so you're using a wired receiver.. That helps to know. You should be able to choose TomTom Wired GPS or Other Wired GPS, and it should just... work. If it doesn't, choose the nearest chocie to your receiver, and go into the Advanced settings (if the option button is available) - if so, doublecheck what your COM port settings are.

Where did you buy the cradel from, I just got ripped off to the tune of £48 off ebay due to the cradle not actually passing the srl connection through, all it does is provide power for a Bluetooth GPS Receiver out of the port on the side.

I think I've heard othe rpeople saying that wired GPS receivers will not work with the Universal. Can anyone confirm this?

What you have heard is correct the mini USB on the Exec WILL NOT accept a GPS connection, you need a bluetooth device for this to work - Mike

Tony B - that sounds like the cradle i am using - jasjar or jamjar something like that!
I have put my wired GPS straight in to the side, and nothing!!
think you might have got it mate!

hi there
i am using the wired gps with mda pro tomotm car cradle
tomtom software working like i can start the tomotm and see the setting etc
now when i connect the tomtom wired gps via rj11 in cradle but i can not recieve gps signal
device says "no gps device"
please help
Regrads
Gugi

Bluetooth GPS Woes

Hi,
I seem to be having a problem with GPS bluetooth related connections with my Dopod 838 Pro.
Ive paired my Globalsat BT338 receiver and setup an outgoing serial port on my Dopod, and I can use Destinator 6 and TomTom 6 fine (for the time being).
The next day/time when I try to start the GPS applications, both programs report that they cant find the GPS signal/receiver even though its been correctly configured to work previously.
I then have to enter the Bluetooth settings to change and assign another outgoing serial port and reconfigure the GPS applications to the new serial port to work.
The programs and the GPS receiver worked fine with my old iPAQ hx4700 so its not a receiver or program issue.
I'm at my wits end and would appreciate any info on solving this problem.
Thanks in advance.

Delete / unpair your GPS
Make a new pair, and when you assign an outgoing COM port, use a NON secure COM port.
(Deselect the checkbox)
This should work

Rik_053 said:
Delete / unpair your GPS
Make a new pair, and when you assign an outgoing COM port, use a NON secure COM port.
(Deselect the checkbox)
This should work
Click to expand...
Click to collapse
Hi,
Ive been through this unpair / pair scenario more than a few times and Ive never used a secure com port connection.

try destinator PN 6
also make sure you pair BEFORE starting Destinator PN; I spent a whole two days before I Got this to work ... then once it worked .. the answer was actually quite logical
sorry cant remember how i did it as it was months ago when I got and paired my tytn; now I use destinator pn 6

njay22 said:
try destinator PN 6
also make sure you pair BEFORE starting Destinator PN; I spent a whole two days before I Got this to work ... then once it worked .. the answer was actually quite logical
sorry cant remember how i did it as it was months ago when I got and paired my tytn; now I use destinator pn 6
Click to expand...
Click to collapse
Hi,
The pairing has been done before any program was launched.
Im trying with both destinator 6 and tomtom 6

Bluetooth GPS Woes...
Is it the Bluetooth connection you are having problems with or getting a GPS signal. I have this exact setup working fine. What I notice is that often it will take a few minutes for the BT-338 to find enough satellites to provide a GPS signal (green light flashing). The bluetooth should connect immediately regardless of whether the GPS signal is available yet. The blue light on the BT-338 should flash twice as fast as when you first turn it on to tell you that it is connected to a Bluetooth device.
I am using TomTom 6 and it will say no GPS signal or GPS signal lost XX seconds ago. Is this similar to what you are noticing?

clearwave1 said:
Is it the Bluetooth connection you are having problems with or getting a GPS signal. I have this exact setup working fine. What I notice is that often it will take a few minutes for the BT-338 to find enough satellites to provide a GPS signal (green light flashing). The bluetooth should connect immediately regardless of whether the GPS signal is available yet. The blue light on the BT-338 should flash twice as fast as when you first turn it on to tell you that it is connected to a Bluetooth device.
I am using TomTom 6 and it will say no GPS signal or GPS signal lost XX seconds ago. Is this similar to what you are noticing?
Click to expand...
Click to collapse
Hi,
Both the bluetooth reciever and the software work fine and obtain a fix.
the next time the software is started it cant find the reciver and i have to unpair, repair and set a new comm port for it to work.
the gps reciver obtains a fix but the pda cant see it.

Destinator PN has an automatic reconnect tick box on the GPS Settings page. I don't know if D6 or TT have a similar thing. If so, make sure this box is ticked.
I use D PN with a Parrot CK3300 combined handsfree and GPS receiver, and after major stuffing around trying to get D PN set to the correct port initially, it has worked fine since.

Ive sorted the issue out and hopefully this will help others experiencing the same problem.
The problem was that although an outgoing serial port was setup, for some reason it was not mapped to the bluetooth device.
It just specified "COM9" instead of having the bluetooth device "BT338(COM9)" under the bluetooth COM Ports setting.
This seems to be the reason why when the device was unpaired/paired and a com port setup it worked for the time being. After the bluetooth device was disconnected the settings mapping to the device were not retained.

Rambler76,
I am looking to get a GPS unit for my Dopod 838Pro. Which of the two, Destinator or Tom Tom, do you like best?
I know where to get Destinator 6 in Sydney, where does one get Tom Tom 6?

Rambler76 said:
Hi,
the next time the software is started it cant find the reciver and i have to unpair, repair and set a new comm port for it to work.
QUOTE]
Can I ask, with a new com port being asssigned each time you have a problem, when you run out of ports what happens?
Are you able to regain the use of these once assigned ports ? by resetting any settings ?
Does this make any sense?
Thanks for any input ..
Click to expand...
Click to collapse

killabeezz said:
Rambler76 said:
Hi,
the next time the software is started it cant find the reciver and i have to unpair, repair and set a new comm port for it to work.
QUOTE]
Can I ask, with a new com port being asssigned each time you have a problem, when you run out of ports what happens?
Are you able to regain the use of these once assigned ports ? by resetting any settings ?
Does this make any sense?
Thanks for any input ..
Click to expand...
Click to collapse
hi,
what i mean to say is that i switch com ports.
the issue was resolved by mapping the com port to the bluetooth device.
Click to expand...
Click to collapse

Yes I understand what you have done but can I ask again :-
Are you able to regain the use of these once assigned ports ? by resetting any settings ?
Thanks,,

Tom Tom Woes
Hi,
I had the same problem until recently.
To fix I did the following:
Delete pair with GPS receiver,
Create new pair with GPS receiver (put in passkey 0000)
Tick the box for Serial Port
The in Bluetooth Settings -> COM Ports tab, I clicked 'New Outgoing Port'
Selected the GPS unit, and selected Port 4 and unticked the 'Secure' checkbox
Now open TomTom, Select Change Preferences, then Show GPS Status, then Configure, then Other Bluetooth Receiver, then Select COM 4.
Now TT works as it should - turning on and off Bluetooth on Open/Close, and no problems with needing to re-pair.
Previously I had always paired the BT GPS on COM 0 with Secure ticked. This worked the first time only, and I had to re-create the same pair each time I wanted to run the app.
Hope this helps some of you.
(btw I was using TT6 when I found the solution, but I imagine it would have worked for 5 too)

dopod bluetooth problems
Guys I have the same problem with my bluetooth and my dopod. It connects then disconnects.
I have also noticed that the systems unchecks the turn on bluetooth check box and the make this device discoverable to other devices.
Does anyone have any ideas?
Guys I just read this at another forum.
"The Dopod 838 pro and WM5 have chronic problems with the bluetooth stack, which is why everyone is waiting for the new ROM to appear, which will hopefully be WM6. HTC (manufacturers of Dopod 838 pro) announced that the new ROM will fix all of the known problems"
This I learn after having a car accident (minor) in my car playing with the bluetooth and trying to get it to work. Hutchison 3g should only be selling these with a warning.
I assume there is also a problem with the JasJam as they are the same phone.

Knight__Mayor said:
Hi,
To fix I did the following:
The in Bluetooth Settings -> COM Ports tab, I clicked 'New Outgoing Port'
Selected the GPS unit, and selected Port 4 and unticked the 'Secure' checkbox
Click to expand...
Click to collapse
Have to concur with Knight_Mayor. Was having trouble getting a signal/satellite fix using a Holux GPSlim236. Then I set it to COM9 with the "Secure" box unchecked. I had barely closed the window and my M3100 had a fix from inside my house! (tomtom 6 had been running in the background whilst the adjustments were being made)

dabs1 said:
Have to concur with Knight_Mayor. Was having trouble getting a signal/satellite fix using a Holux GPSlim236. Then I set it to COM9 with the "Secure" box unchecked. I had barely closed the window and my M3100 had a fix from inside my house! (tomtom 6 had been running in the background whilst the adjustments were being made)
Click to expand...
Click to collapse
yeah i recon its the screwy MS bluetooth stack, im interested to hear from anyone running tomtom on hermes with the widcomm bluetooth

Tomtom And Gps
I have found that the best cure for gps woes and pocket pc is to use GPS Gate. It make a virtual com port and will always be the same. I have used it always and never have problems connecting.
G

Tomtom 6 installed, by no GPS?

I've just installed tomtom 6 on my pda and also got it all paired up with by bluetooth gps. Also opened com0 as an outgoing port. I can see in the gps status screen the little yellow and blue circle going round, but i cant seem to pick up any sattelites, have kept in the same position for over 40mins. I used the same gps unit on my old MDA III pda and it worked perfect.
Is there anything else i need to do?

You could try downloading and trying VisualGPSce or summat to test the output from the GPS BT unit, just in case it's a TT issue.
You might even have some sort of other SW on your PPC confirming the information received from your BT GPS

Have tried the above program but dont get any response from it. Not too sure what the problem could be.
Anyone else with a similar issue?

So you've switched on your bluetooth gps unit and paired the two, and you know that's all working. Except that no gps unit can see it?

I've paired up my Vario II with the GPS unit. Opened and outgoing Com port (i've tried com0 and com4). Now i start tomtom through preeference etc i select the correct com port. Now the yellow/black icon starts to move, but even after an hour of standing in one place in the open air i dont get any gps response.
And i used the same gps unit on TT5.

Connecting a non-tomtom gps to tomtom 6
1. You need to pair your bluetooth GPS to your TYTn
2. you need to connect it to a com-port (take a high port like 9)
3. start tomtom and set a non-tomtom bluetooth gps at com 9
thats it.

hmmm, i've tried the above too on com9 but no change. The gps device does work as it worked with TT5.

ump001 said:
hmmm, i've tried the above too on com9 but no change. The gps device does work as it worked with TT5.
Click to expand...
Click to collapse
My be the GPS device is faulty... test with another app, test with windows mobile live search maps, is freeware http://wls.live.com/

My COM Settings
As a novice, I went through a lot of trial and error before getting my GPS to work.
My COM Ports settings now work fine:
BT GPS (COM9)
Incoming Port (COM2)
Have you set an incoming as well as an outgoing port? Maybe a silly question.

beam
try turning off beam receive all incoming beams this makes it work on xda1 this might help

Time has come said:
As a novice, I went through a lot of trial and error before getting my GPS to work.
My COM Ports settings now work fine:
BT GPS (COM9)
Incoming Port (COM2)
Have you set an incoming as well as an outgoing port? Maybe a silly question.
Click to expand...
Click to collapse
You shouldn't need an incoming port.. only outgoing.. (at least on the 10 or so BT GPS unit's ive tried none have needed it)
==========
(Also note on the hermes you cant use COM8 reliably as it messes with the USB Modem options as they seem to use COM8 internally so stay clear of that one)
VisualGPSce doesnt seem to work properly on my hermes.. I use free.mytracking.net's client to test gps easily.. just set the right com port and hit start.. ignore the user/pass bit as thats not important.. if you have a good signal you will get a green bar and number of satellites if communications are working and a red bar and 0 satellites if they are not.

Make sure you do not have the "secure connection" box ticked in port settings, otherwise you will not connect.

Tytn has an interesting feature: To pick up a satellite signal with TomTom 6 the radio of the Tytn must be switched ON. If the radio is switched off no signal is beeing received from the bluethooth device.

Thanks
char05 said:
Tytn has an interesting feature: To pick up a satellite signal with TomTom 6 the radio of the Tytn must be switched ON. If the radio is switched off no signal is beeing received from the bluethooth device.
Click to expand...
Click to collapse
Configured lots of tomtom and GPS. Paired, outgoing, no secure, etc. I Know how.
Flashed to WM6 and spent all the afternoon till I read this thread.
Almost fool!
Thanks a lot, man!!