Related
Hey when i try to enable my BT it says "There is no Bluetooth hardware instaled on this device."
What shall i do?
Mr-Sale said:
Hey when i try to enable my BT it says "There is no Bluetooth hardware instaled on this device."
What shall i do?
Click to expand...
Click to collapse
Go to your extended ROM >>> see if there is a BT.cab there, and of so run it. Otherwise you may have to reflash the ROM. Maybe others will advise differently.
Nope...that aint there... i searched a few extended rom compilations but couldnt find any BT.cab or similiar cab
BT
Mr-Sale said:
Nope...that aint there... i searched a few extended rom compilations but couldnt find any BT.cab or similiar cab
Click to expand...
Click to collapse
en
Given we are using the same ROM version (Sin's merged), then I think the drivers are there but it sounds as thought the icon (BT_Icon.cab in the ROM) may be missing. What you could do is download BTH Tools v.1010 from XDA-Developers ... I found it yesterday by doing a search. This is installed from a PC and may help you get it going. It is not a BT engine, merely a means of activating/deactivating BT and it shows which battery is in use as well.
I have a weird one as well in that my BT works well in connecting with a laptop computer, but when I use it with a Plantronics M3000 BT earpiece, I have to re-do the connection the hard way (i.e., pair the damn thing) after every time the XDA II is suspended. I don't think it is the Plantronics device (which is a piece of ****e in my experience) alone .... will sort it even if I have to buy a better BT earpiece. Maybe others have some advice??
I just got the Microsoft Voice Command 1.6 (refer to as VC from here on) this morning and so far it has been quite disappointing.
I am using it on a Cingular 8525 with a Sony Ericsson HBH-GV435 headset (both are BT 2.0).
Right after the installation I noticed that the talk button on the headset did not trigger the VC so I did a power cycling.
After the power cycling the button will now trigger the VC as if I pushed the VC button on the phone but the problem is that it is not picking up my voice command via the headset but it is still listening from the phone's mic.
Any thoughts on this?
hjkl;' why no delete?
skygear said:
did you try to go under your d\settingd to chsnge the buttons? i think you have to reg edit the files for ear pice mic
Click to expand...
Click to collapse
I didn't know that.....I'm going to try and search for it. Can you maybe post a linky for the info on how to do that?
thx!
Version 1.6 at present time DOES NOT WORK properly with the TyTN. You should go back to V1.5 and wait for a patch...
goestoeleven said:
Version 1.6 at present time DOES NOT WORK properly with the TyTN. You should go back to V1.5 and wait for a patch...
Click to expand...
Click to collapse
I see. Thanks for the info. Hope the patch will be available soon!
What is the probelm with the ver 1.6 and the TyTn? Is it just the TyTN rom or does it not function with the JasJam or the 8525 either?
Dp you guys know this by experience or is it posted somewhere?
PocketPCThoughts list the 8525 as a "compatible device".
The problem will affect all Hermes devices, and it will probably require a patch / a new dll and/or a registry hack to make things work properly. It should work, but it doesn't, and this goes to show you what a poor job of testing was done before product release.
If the single biggest additional feature/function (ie, bluetooth support) doesn't work properly, why was it shipped?
goestoeleven said:
The problem will affect all Hermes devices, and it will probably require a patch / a new dll and/or a registry hack to make things work properly. It should work, but it doesn't, and this goes to show you what a poor job of testing was done before product release.
If the single biggest additional feature/function (ie, bluetooth support) doesn't work properly, why was it shipped?
Click to expand...
Click to collapse
Come on folks... This is MS we are talking about...
If it had been a software package with a little penguin or a devil on it we would be just fine
mrderby said:
Come on folks... This is MS we are talking about...
If it had been a software package with a little penguin or a devil on it we would be just fine
Click to expand...
Click to collapse
Or maybe we should start to look at HTC... Their implementation of the whole bluetooth "feature" is crap too... AD2P anybody? well let's hack the crap out of the register, and than try to be happy with songs that hickup every 30 secs or so... neah great!
First: Hermes generally does not work with BT2.0, I guess, especially my MDAvario2 does not...
I'm using a BT Headset HBH608, which was perfectly working with every phone I've ever tried...
Second: VC1.6 could not be installed on Vario2' and Hermes Devices at all, getting an error message...
VC1.5 (engl.) works, not perfect, but it usually works...
MickKnatterton said:
First: Hermes generally does not work with BT2.0, I guess, especially my MDAvario2 does not...
I'm using a BT Headset HBH608, which was perfectly working with every phone I've ever tried...
Second: VC1.6 could not be installed on Vario2' and Hermes Devices at all, getting an error message...
VC1.5 (engl.) works, not perfect, but it usually works...
Click to expand...
Click to collapse
What do you mean it cant be installed. I have it installed on a TyTn and it works perfectly. I am not using a BT headset, so cant comment on that.
I've got v1.6 on an 8525 and it seems to working fine.
what exactly are the problems others are having with Hermes devices?
@DigitalFX: Hermes does support Bluetooth 2.0, but not Enhanced Data Rate.
@JCrompton: MSVC 1.6 does not route sounds/commands properly through a Bluetooth headset on the Hermes. You may be able to initiate a call with your headset button, but you'll be using the mic/speaker on the Hermes to complete it. Also, sounds/announcements are not working as advertised. HTC and M$ are working on a patch.
VC 1.6 works fine on my MDA with Motorola BT headset.
Mark (NL) said:
Or maybe we should start to look at HTC... Their implementation of the whole bluetooth "feature" is crap too... AD2P anybody? well let's hack the crap out of the register, and than try to be happy with songs that hickup every 30 secs or so... neah great!
Click to expand...
Click to collapse
Seriously, why dind't any OEM use the Widcomm stack instead of the crappy MS one ?!
If only there was a way to hack the Widcomm stack and replace the MS one like they did with the Dell axims..
Adi
goestoeleven said:
@DigitalFX: Hermes does support Bluetooth 2.0, but not Enhanced Data Rate.
@JCrompton: MSVC 1.6 does not route sounds/commands properly through a Bluetooth headset on the Hermes. You may be able to initiate a call with your headset button, but you'll be using the mic/speaker on the Hermes to complete it. Also, sounds/announcements are not working as advertised. HTC and M$ are working on a patch.
Click to expand...
Click to collapse
Has anyone tried this... (look for the cab)
http://forum.xda-developers.com/showthread.php?t=283412&page=5
My 8525 works fine with 1.6 and my SE662 BT headset. Calls can be activated over BT using headset button, and audio routes to my headset throughout my call.
URPREY said:
My 8525 works fine with 1.6 and my SE662 BT headset. Calls can be activated over BT using headset button, and audio routes to my headset throughout my call.
Click to expand...
Click to collapse
Wow! Have you done any registry hacks? I'd love to see what your Voice Command keys look like....
TIA,
Richard
I have an 8525 also, and 1.6 works as MS says it does.
The headset button activates voice command, the Beep occurs on the 8525, and the mike on the 8525 listens for input. If I say, Dial ... or Call... then the call works fine on the BT headset like expected.
I know a patch is in the works to fix this issue, and when they do, 1.6 is superior to 1.5 for voice interpretation.
However, for now, I have 1.5 working perfectly fine. All features work, and all I had to do was enter/change 2 registry keys (only 1 was necessary)
xcsdm said:
I have an 8525 also, and 1.6 works as MS says it does.
The headset button activates voice command, the Beep occurs on the 8525, and the mike on the 8525 listens for input. If I say, Dial ... or Call... then the call works fine on the BT headset like expected.
Click to expand...
Click to collapse
So how loud do you have to shout for the mike on the 8525 to hear you if the phone is in the next room, or in your purse or you're driving? It might be the way MS intended it to work, but I doubt it.
[RANT]
I can't believe that MS wouldn't have caught this problem during beta testing. Speaks volumes (pun intended) for the current state of software development and testing at MS. Anyone know if MS Reader works with WM5 yet? How about full multi-user support for ActiveSync? Win XP has been around for years now with this funtionality. And while I am on my rant, how about SP3 for Win XP? Currently we would have to download and install over 70 (!) critical patches to SP2 just to get our computers to the dynamic state they are at today. Come on MS, enough is enough. Get your s#!* together!!
[/RANT]
John
We just bought an '08 Altima with the bluetooth option. I can pair the XV6800 with no problem, but quality sucks. It is super choppy on my end and the person on the other end can't hear me at all. I tried my wifes XV6800, same thing. I can pair my old E815 and it works perfectly, so it's not the car. I tried a hard reset, no difference.
I tried loading dcd's clean rom 1.6.7, no difference. Is the BT stack upgraded in this rom?
Is there a newer BT stack out there that I could try?
Its worth downloading and trying the Jetware BT Extensions and see if that helps....but usually it does not change quality so much as enable functionality.
http://www.jetwaremobile.com/
Brad
Thanks for the suggestion, but it didn't help.
Developer help with Infiniti/Nissan Bluetooth?
I've got the exact same issue with an '07 Infiniti G35 w/navigation. I've been doing lots of reading on the xv6800's bluetooth, have tried DCD's and Custel's roms, and was just about to start my own thread, but I'll bet our cars are the same bluetooth/rom wise.
Jetware didn't help me either.
Here's the best fix I've found and it works for me consistently.
-Whence the option's available depending on whether you're dialing out or receiving, click the "use handset" button (transfers call to the xv6800).
-Shortly after press the "phone" button (transfers call back through car).
-Should work as expected after that.
Anyway, at this point I'm hoping one of the kind devs on this forum (DCD or Custel to name just two of many) might find a sec to help us out, although I'm aware and appreciate the fact that many other users are keeping them very busy on their own projects.
I'm assuming the xv6800's hardware would be most similar to other HTC pda phones (not sure what happens between GSM and CDMA devices), so here's a list of their phones who's bluetooth does work with my car (from here). It supports the bluetooth in 144 phones total.
Kaiser (wasn't working with stock rom, but works after this patch from HTC)
Hermes
Atlas
Wizard
Apache
Magician
Harrier
HTC pda phones that don't work with my car (at least not 100%).
Vogue
Elf
Titan
The Titan DOES work with an '07-'08 Infiniti G35 WITHOUT navigation (buy more, get less ).
In addition to the stock Verizon rom I've tried DCD's 1.6.1, 1.6.7, and Custel's 1.1 with no change in the symptoms.
It's my understanding the dev community thinks modding the Vogue's bluetooth for the Titan shows the most promise. I found this thread mentioning an alternative, but it seems to have gone stale on another forum. I'd prefer not to use that forum.
I understand the Vogue's bluetooth might show the most promise for general bluetooth applications (which would satisfy the most users), but becuase I plan to use bluetooth solely through this car, does anyone know if I might be able to go an easier route given the information I've provided?
I'm using radio 1.40.00, could 1.47.01 make a difference?
Can anything be learned through HTC's Kaiser update patch?
Are there any bluetooth alternatives being tested that I haven't found?
Thanks for any help anyone can provide.
OK. I tried what you said and confirm the same results on the '08 Altima. If I switch to handset and back to Bluetooth, the sound is clear (weird). The only problem is, I can't switch until a call is in progress. This is a work around, but not a good one. We need a BT stack that fixes this. Or maybe firmware upgrade from the auto manufacturer.
I know this is going to sounds like a cheap shot, but it sounds to me like something needs to be fixed on Nissan's side. I've tried mine in an Accura without any problem, however both of your stereos are manufactured by Nissan.
A word of advice: I always found that auto makers should stick to what they do- namely, make cars. If Nissan were so great at BT stereos, you'd see nissan headsets.
I never bother with factory Bluetooth anymore- I swapped my stereo right away for a decent Sony Xplod system that supports A2DP (wireless stereo) as well as phone calls. The aftermarket stereo not only sounds great, but I play all my music from my phone without taking it out of my pocket. Last I checked, no stock car stereos supported this. Sony is good at stereo and bluetooth (been around the block a few times).
Complain to Nissan. Or swap your stereo for something decent.
My Sprint 6700 with BigJ Rom works great with the 08 Altima. In the fact the audio quality is better than the Sanyo Katana that I also have paired. I am dispointed that I cannt answer calls from both phones on the car headset without first selecting the phone that has an incoming call. Even my At&T home phone with bluetooth can do that although it does require you to select a cellphone for outgoing calls.
I was able to upload a contact entry from my 6700 to the car Download phonebook. However, I can not get that into the more usable phonebook directory. Anyone succeed in doing that?
shannl said:
My Sprint 6700 with BigJ Rom works great with the 08 Altima.
Click to expand...
Click to collapse
You might be in the wrong forum. The Titan is a 6800, not a 6700.
yes, but this thread is discussing the Altima BT stereo. Truthfully, this whole thread should go in a more general BT forum, since I don't think it pertains to the 6800 exactly.
08 altima bluetooth
Just wanted to say thanks to Park City for posting the name of the web site with the bluetooth extentions (jetwaremobile.com). I have just recently purchased an 08 Altima with the Nav system and bluetooth. I have an Tmobile MDA with a cooked ROM running WM6 and I could not get the entire outlook phone book to download to the car. Once I installed the jetware mobile extentions everything worked just fine. I even got some additional functionality I was not expecting like signal strengh and battery status on the nav srceen. As for voice quality, it's never been an issue for me. So far anyway
As I can see, they are currently testing the Mogul with both of your cars. I don't know what they mean by 'testing', but that's what is going on right now.
http://www.nissanusa.com/bluetooth/...gation+System&mfg=All+Manufacturers&x=51&y=16
http://www.infiniti.com/bluetooth/t...igation+System&mfg=All+Manufacturers&x=42&y=9
arcanecho said:
As I can see, they are currently testing the Mogul with both of your cars.
Click to expand...
Click to collapse
I saw that too, but I don't have a lot of confidence they'll be releasing a bluetooth update any time soon. That's why I was hoping the Titan's bluetooth hardware might be similar enough to the hardware in one of the devices that DO work with our cars (Kaiser, etc., list in my earlier post) that their bluetooth software could be ported "easily" to the Titan. I'm sure the devs here are trying to get the Titan's bluetooth to work as well as possible for everyone's devices, which makes sense. However, with California's new "handsfree driving" law starting July '08, I'm only concerned with getting the Titan to work with my car.
Apparently no one's too sure if that's possible.
1. have any of you verified first hand that the kaiser does in fact work?
2. could someone research and identify the bt hardware in the kaiser, and the titan?
3. has anyone run the kaiser bt fix on their titan and tried it?
i suppose i never thought to look at the kaiser's bt. mine still functions after applying that kaiser patch..
the kaiser patch is a replacement TIInit_4_2_38.bts file
this file did not exist in any titan roms prior to 2.16
2.16 introduced this file (i compared md5 and its not the same data)
2.17, htcs supposed 'fix', does NOT contain this file
all vogue roms i have seen DO contain this file, but again its different data
maybe you guys are on to something
i will throw something together tomorrow probably...drinking time.
dcd, thanks for the help, enjoy those drinks!
1. Not first hand, I'm going off this post. That thread's also why I believe the Kaiser wasn't working with the car before the patch.
2. I've spent a lot of time trying, but have come up empty on any detailed hardware specs.
3. I just ran the Kaiser patch and the bluetooth functions the same as it does without the patch.
I'm using a rom from your 1.6.7 kitchen with nothing else added (rom's working great, btw). I had the same issue with the stock Verizon rom.
Crazy thought, but if the cooked rom I'm using is based on a stock rom that didn't originally include the .bts file (2.17), could it be being ignored?
FZ1 said:
this post
Click to expand...
Click to collapse
good enough for me
Crazy thought, but if the cooked rom I'm using is based on a stock rom that didn't originally include the .bts file (2.17), could it be being ignored?
Click to expand...
Click to collapse
maybe...i dont know how the file functions and ties into the others yet
FZ1 said:
The Titan DOES work with an '07-'08 Infiniti G35 WITHOUT navigation (buy more, get less ).
Click to expand...
Click to collapse
i take it they are completely different head units?
I have a 07 G35 WITH Navi and yes, the quality is choppy when I connect my phone to it. I have been just using my Platronics Discover 640 for the BT these days... It'd be nice if someone can come up with a solution for this...
dcd1182 said:
i take it they are completely different head units?
Click to expand...
Click to collapse
They're pretty different. With nav you get a 10 gig hd it'll rip cd's to, the nav runs off that hd, the gui which controls much of the car is different, voice prompts are different, the available buttons are different (see attached pics), and you lose a cd changer. I do know first hand that w/o nav the bt works great with an XV6800 (got a loaner once). Again, I've been unable to find out what's specifically different hardware wise (even with the full service manual).
riDuh7 said:
I have a 07 G35 WITH Navi and yes, the quality is choppy when I connect my phone to it.
Click to expand...
Click to collapse
Is choppy quality your only problem? Are your symptoms different from ours in my earlier post?
FZ1 said:
They're pretty different. With nav you get a 10 gig hd it'll rip cd's to, the nav runs off that hd, the gui which controls much of the car is different, voice prompts are different, the available buttons are different (see attached pics), and you lose a cd changer. I do know first hand that w/o nav the bt works great with an XV6800 (got a loaner once). Again, I've been unable to find out what's specifically different hardware wise (even with the full service manual).
Is choppy quality your only problem? Are your symptoms different from ours in my earlier post?
Click to expand...
Click to collapse
Once connected, I get a really static noise from my end while in the conversation. Of course, it'a really not usable at all....
I'm going to try the reconnecting method that was mentioned above today. I'll come back and report the outcome. And thanks for the help BTW.
EDIT: BTW, my Wizard (Cingy 8125), Hermes (Cingy 8525), Samsung i760, and few of the Moto handsets are all fine paired to my car. MAYBE, someone can get the BT stack from Hermes to work with the Titan?
FZ1 said:
They're pretty different. With nav you get a 10 gig hd it'll rip cd's to
Click to expand...
Click to collapse
whoa, someone hook me up with a G35 to uh, test
Wizard (Cingy 8125), Hermes (Cingy 8525), Samsung i760, and few of the Moto handsets are all fine paired to my car. MAYBE, someone can get the BT stack from Hermes to work with the Titan?
Click to expand...
Click to collapse
well, peices of it maybe. i would blindly guess that the kaiser is closer to titan than hermes, but we need to exactly identify the bt chip in each. plus its still shady then, ie the kaiser has tnetw1251 for wlan same as the titan and I cannot get their newer wlan driver to work on my device.
what we really need to look at is previous bt stack modifications for other devices. i need a better understanding of tiinit_blah. I've also noticed that the devices that work have a more extensive, or a 2nd audiopara file that sets values for some bt devices. to be completely honest right now i dont know what im looking at and i need to figure out how it all fits together before i know where to start.
Well, I tried reconnect method from both phone and the car, but neither did anything at all. The quality is still crappy as heck. Man... I reallly wish this works.
EDIT: Actually my side of the speaker was complete static, and the other side could not hear what I was saying AT ALL. This efing blows.
Dear Xda's, i have a problem and i need help! I would like to know if there is anyone that knows a rom in which the w100 remote control works perfectly? Since all the Roms that i have tried lately (Dutty, L26, UDK) fail misserably when i try to make to make the remote work. They all af the same problem that they just dont recoqnise the remote, if i plug it in, the sounds still comes over the speaker instead of the headphones.
I also tried the drivers on each rom but they fail to install since its not necessary accourding to them. I have tried extracting the drivers and install one of the seperate drivers but they eather cause my touchscreen not to work or my sound disappears.
I've used the search btw and googled, but after 3 nights for searching and trying i havent found anything so far.
If someone knows a rom, driver or anything that works, please say it here since im gettin a bit frustated. Thanks!
Bump, anyone plix?
Just gonna do smooth bump again since after a month of trying still no succes. HTC isnt responding with an answer so my only hope is here!
L26 KaiserDiamond Throttle Launcher Beta 6 works partially
I have a Kaiser (tilt) running this ROM and the sound is OK. Volume control pops WMP (I use S2P) - mute pops Audio Control and I did not have a chance to test the phone funcitons. But at least I can liste to music
Did you try the original HTC Tytn II ROM posted somewhere in Kaiser ROM development ?
I hope this helps.
I am in the process of moving from a TP to a TP2, and am configuring the latter, however (and I have seen this problem elsewhere regarding this phone) I cannot get my bluetooth headset to play nice with MSVC. Specifically the button to initiate the call.
I have tried the steps listed by bengalih and all should work. From what I have read, they are using a different bluetooth stack for the TP2 which is the issue.
So I have a few questions.
1. Has anyone got the headset button to activate MSVC successfully?
2. Is there a way to change the bluetooth stack without changing the ROM
3. will changing the ROM fix this? Any way I can tell which ROMS will have a working bluetooth stack?
I have Vodafone UK branded model.
This is I think the last thing that I need to make the phone 'functional' for my daily use, and so would be really grateful for any advice.
crazyC said:
[...]
1. Has anyone got the headset button to activate MSVC successfully?
2. Is there a way to change the bluetooth stack without changing the ROM
3. will changing the ROM fix this? Any way I can tell which ROMS will have a working bluetooth stack?
[...]
Click to expand...
Click to collapse
1. Yes, with certain headsets that will allow a verrry loooong press without turning off.
2. I suppose it's theoretically possible, but I do not know for sure.
3. Yes. Some of the cooked roms work fine with MSVC and bluetooth headsets on the TP2.
Could you give examples of the cooked roms that work?
Cheers
C.
any trick or hack we can borrow from "bt-MSVCworking roms" and transplant in stock roms? maybe a skilled dev might try to do something.... PLEASE guys!
crazyC said:
Could you give examples of the cooked roms that work?
Cheers
C.
Click to expand...
Click to collapse
NRGs Genesis ROM works for me. http://forum.xda-developers.com/showthread.php?t=553506
Gordon
Flashing now and will confirm experience with my two headsets shortly.
EDIT:
Only had time to test the specific problem identified at the start - both headsets work fine now. Hurrah. I do not know the specifics behind why, or if this will apply to all 6.5 based roms. But for anyone desperately seeking a resolution the headset initiation of MSVC, using the ROM above does fix it. And so far the NRG ROM does seem good.
crazyC said:
Could you give examples of the cooked roms that work?
Cheers
C.
Click to expand...
Click to collapse
I currently use EnergyROM version 20090822 (Titanium) with MSVC 1.6.21040.
Thanks to those above for their help.
thank you for the contribution, but for who is keeping stock rom, any possible solution??? I would sell my soul for this...
A "stand alone solution" for Touch Pro2s with an original ROM would be great. Possibly one of the ROM cookers can extract it for us.
Thanks a lot in advance,
Klaus
that would be really appreciated!!!
Got it to work, but...........
Hi I have a TP2 with MSVC installed. I got it to work by editing the regsitry and swapping SDDialer.exe with voicecmd.exe. It works great. I press the button on my bluetooth headset and MSVC is invoked.
The only problem is that the voice commaned that i say has to go through the TP2 microphone not the bluetooth headset microphone. Any one knows how to direct the audio input to the headset microphone???
I am using Miri cooked ROM 23017 with manila v2.5
rgd
Raed
this bluetooth activation is a real bugger!! does the audio from VC go to the device loudspeaker, or BT headset? that would be a beginning, somehow...
any luck with cyberon voice commander yet?
cyberpunk627 said:
this bluetooth activation is a real bugger!! ...
any luck with cyberon voice commander yet?
Click to expand...
Click to collapse
Well I have the Voda version of the TP2 and I also have a spare to play with (I cracked the screen on my first one and got a new one but they never asked for the old one back - it works fine) so I loaded the EnergyROM from a link elsewhere on this thread on to it. My bluetooth headset does not work with the Cyberon Voice speed dial program which I prefer - although this ROM does alow you to put all sounds through the headset. It worked fine on my old TyTn from Voda. Like you said, this is a real bu**er!
Barry
mmmh I'm becoming more and more obsessed with this. I googled everywhere but found anything... someone reports msvc and cvc as working, someone else not.. but nobody says it's working from BT headset... blame on htc that forgot such an important thing!
cyberpunk627 said:
mmmh I'm becoming more and more obsessed with this. I googled everywhere but found anything... someone reports msvc and cvc as working, someone else not.. but nobody says it's working from BT headset... blame on htc that forgot such an important thing!
Click to expand...
Click to collapse
It's all true
I understand that on the Telus ROM MSVC works with Bluetooth out the box
MSVC and CVC do work, UNLESS you want to use Bluetooth, when they don't (with stock ROMS in the EU) ;-)
I'm using MSVC on NRGs Genesis ROM and it works from Bluetooth as it should. If I get a Chance I'll install CVC and give it a try and report back.
Gordon
it would be nice if someone can mange to transplant needed files... I like the bluetooth stack on TP2, really better than usual, but this thing needs more attention from HTC and the 3rd party developers.
msvc is 3 years old as of now, no newer versions, same as cvc... too bad, technology evolved a lot it 3 years, and these programs might improve really really much!! especially the recognition algorythm, and functions.
well, I hope the new wm6.5 will bring some BT improvements for TP2 then...do not want to stick with custom roms yet. keeping my fingers crossed!
should you manage to try, let us know about cvc and make a little comparison for us! you lucky! ;-)
cheers
I´m usign Smaberg´s Touch X "HERO" EDITION and VC works just fine.
GordonTGopher said:
I'm using MSVC on NRGs Genesis ROM and it works from Bluetooth as it should. If I get a Chance I'll install CVC and give it a try and report back.
Gordon
Click to expand...
Click to collapse
As my touch screen has died I am without a TP2, so I can't do this for the moment
Gordon
I've had this problem sometimes on my VZW CDMA Touch Pro 2. my solution has been to turn off the headset and turn it back on. It seems the problem starts for me when I have the headset on when rebooting the phone. Possibly MSVC doesn't detect the presence of the headset or something to that effect.