Related
Hi all I would like to get this application working but it does not look like the test application works on our XDA's?? :-( It is saying somthing about needing the WIDCOMM drivers.... Any idea if there is an esay and safe way to get this utility working?
Hear is the web address of where you can find the application:
http://www.buzzone.net/eng/index.html
Thanks guys
Just install the latest Widcomm PPCPE drivers in "Hacking It"
Thanks for the reply rahjinoh, I will give that a go, I did see somthing about Widcomm drivers but when i looked into that option it seemed very complicated and a number of people where having problems with the XDA II with it would I be correct in saying that?
I'm a little scared to install it if its going to cause me any problems as I use a Bluetooth GPS (with Destinator 3) as well as the O2 Bluetooth headset (The new one, works like a charm)... I use both these bluetooth devices on a daily basis and cant affort them to go down.
Any idea if I will run into any problems if I install this Widcomm driver?
How does it work?
Do I have 2 bluetooth drivers installed then? both MS and Widcomm?
Sorry for all the questions would like to try and find out if it is a simple process or if I could run into problems....
Many thanks!
The Widcomm works with everything EXCEPT headsets.
The GPS would work with Widcomm but not the O2 headset, not yet at least.
Both the stacks will coexists and you can turn on 1 at a time.
I use that stack as well, some people get the "Cannot initialise bluetooth hardware" once in a while, but mine's fine.
I used the Widcomm with Widcomm related software, otherwise, my MS Bluetooth stack is on most of the time.
I use the MS one for my Motorola Headset and Bluetooth GPS, and the Widcomm one for other purposes, like BuzzOne
just remember that you can only enable 1 stack at a time
thanks for the reply rahjinoh
This sounds like a lot of messing around unfortunatly, I wish bluetooth would come up with some starndards and stop stuffing around so much, its going to die in the long run if they don't I recon. I've read that the makers of bluetooth have not stoped any research and devolopment with the technology (Sony/Ericson) this does not seem to be a good step but I don't blame them really as the software side of things is a compleat MESS!!!
Is Microsoft going to be fixing up there drivers? or has the problems been fixed in the Newer Windows 2003 SE Phone Edition? (Which I hope is going to be comming out for our XDA II's some time soon??)...
Cheers!!!
Any more news any one? any ideas what I can do to get my Bluetooth GPS, Head Set and Software Programs to work with ease and no problems?
Still no news??? ANY ONE???
Has any one mannaged to find an easy way to get this program working as yet?
still no news or any ways to get this software working is there? I need a solution that will work with my Bluetooth GPS (and current software, Destinator 3), Bluetooth Headset as well as this program...
Any thoughts any one?
Might want to read this...
http://www.buzzone.net/forum/viewtopic.php?t=12
Thanks for the reply Nighthawk...
I have seen that post before, but what I am worried about is that I've noticed that people on XDA-Forum has posted that you cannot use your Bluetooth Headset if you don't use the MS Stack? Is this correct?
I use a Bluetooth - GPS, Headset and software... Will I have any problems with these?
easiest way to configure internet bluetoothsharing
get widcom drivers from this site
http://forum.xda-developers.com/download.php?id=1436
then put all these files in your pocket pc windows main folder
\Windows.
go to file explorer of your pocket pc and extract these thre which you downloaded or run these files from your pocket pc..
now your bluetoth manager is installed. then just go to this site
and learn step by step to configure your pocket pc for intenet connection sharing with your desktop
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=32&PN=1
i think its the easiest way to do in min not hours
best regards for all my brothers.
Thanks for the reply maani_ch, great advice, only 1 question... If I install these drivers. Do you know if I can still use my Bluetooth GPS with my Bluetooth Heatset at the same time as I do at the moment???
As well as both of them working of course!
CHEERS!
Good question Guest, thats exactualy what I would like to konw, I'm a little scared to install stuff on my XDA now days as in the past I've learned that sometimes things just stop working after installing some applications and it's hard to find out what it is (as it is normaly combinations of things)... As I use it for work it's hard to afford any down time with my phone...
Any answers to the previous questions as to how it would work with Bluetooth GPS and Bluetooth Head set at the same time?
SSA connection is problem...Can any 1 help with a solution?
I have a quetion! How can I remove the first bluetooth icon that I have?
eFiend said:
I have a quetion! How can I remove the first bluetooth icon that I have?
Click to expand...
Click to collapse
HKLM\Services\BTIcon
"Dll"="BTIcon_Dll.dll"
change this in:
"Dll Disabled"="BTIcon_Dll.dll"
(thanks to Cyber_mate)
Is anyone else finding that their bluetooth is really slow at sending and receiving items. Also that there is no way to send items direct to a contact that is in your partnership list, you have to search for them every time you want to send something. If someone has found ways around these problems, please let me know.
an adaption of the Blue angel's bluetooth interface would be lovely. It had loads of options, and let you explore remote devices. This is just like the XDA2.
Would it be possible to port the BA software onto the wizard? I think it uses a different BT stack.
they were able to port the wizards rom to run on a blue angel. I guess they should be able to use the blue angels bluetooth on a wizard.
Please help - is so annoying
Ok, after a little research i found this thread http://forum.xda-developers.com/viewtopic.php?t=33532 .It has an app which i installed and has helped a little. I can now send images direct to people i have paired with without having to search local bluetooth first. The thing is it only sends images to paired people. I want it to also send sound and video files. When in file explorer, holding down on an image brings up the extra option of "Send image via bluetooth" which then allows to send by the already paired devices. When doing the same on videos and sound, it doesnt give this option. Maybe this can be done in the registry, but i dont know alot about that so maybe someone could help?
i tried this on my kjam and i had a problem with it, so i uninstalled it.
the problem i had is that the bt keep switching off by itself with no reason, even if i was already syncing over bt, the connection is lost suddenly and i found out that the bt is off (even though the bt icon on the system tray shows its still on).
i don't know about you guys, but i had this prob twice, i reinstalled it again and gave me the same prob.
i can live without it.
Ok, maybe that stack is not all that great. After soft reset lost all sound, and BT does not work properly. Uninstalled and back to normal. So again is there any way to send to people in your paired list without having to search for them every time. Is becoming a pain coz some new phones turn off discoverable after 60 seconds. So they have to keep turning theirs back on. Its a simple option, dont know why they didnt put this in. Any help?
I haven't seen more than 50-60KBps. Has anyone else seen higher transfer rates?
Wizard's BT is useless. Buggy, slow and poor.
And it is not v2.0, it is v1.2
It does not have EDR.
It doesn't even have PAN ffs... :x
tsiros said:
I haven't seen more than 50-60KBps. Has anyone else seen higher transfer rates?
Wizard's BT is useless. Buggy, slow and poor.
And it is not v2.0, it is v1.2
It does not have EDR.
It doesn't even have PAN ffs... :x
Click to expand...
Click to collapse
Info about BT in wizard. Directly from BT CIG's site. The problem is not with the Wizard, it is in usin MS BT stack.
thanks for that emmeborn, if the problem is the stack, do you know of a stack upgrade which works good? I tried the stack form the blue angel, but stuffed up my phone, so uninstalled it.
actually, i just looked at those pdf files, and at the bottom where it has the revisions, seems they have launched a version around 1 month ago. Would this be a software or hardware update. If its software then i reckon this could solve alot of problems im having.
Enervate said:
actually, i just looked at those pdf files, and at the bottom where it has the revisions, seems they have launched a version around 1 month ago. Would this be a software or hardware update. If its software then i reckon this could solve alot of problems im having.
Click to expand...
Click to collapse
It is the long awaited rom update. A test version of that rom has already leaked. You can find more info in the Wizard upgrade forum topic about that version.
I am awaiting the localized swedish version of that rom and the latest about that version is that it should be released mid March.
Hi,
Just got a new company car and its got a Sony Stereo CD player Speakers Bluetooth and Voice command/recognition
How do I pair my Wizard up. I can detect the radio and pair it, however the radio says no device detected...
Any ideas where to start?
Regards
Barry
bazza1603 said:
Hi,
Just got a new company car and its got a Sony Stereo CD player Speakers Bluetooth and Voice command/recognition
How do I pair my Wizard up. I can detect the radio and pair it, however the radio says no device detected...
Any ideas where to start?
Regards
Barry
Click to expand...
Click to collapse
Ford's probably using stereo bluetooth for its connection. You need to enable your phone with A2DP first, then do the pairing. I have had good luck with the Tornado version of A2DP for the Wizard, but only after I overclocked my phone's processor, and made some minor adjustments to the data rates at a registry level.
If you're a noob, you need to do a LOT of reading before trying this, or you'll lose your ability to generate sound altogether. Not as dramatic as bricking your phone, but makes it almost as useless...
Just search these boards, the answers are here. Search.
...and welcome to the XDA Dev boards!
Hi,
Thanks for the reply..was just starting to look at New phones!
My current Rom is 2.21.4.1.WWEwhich is the latest O2 one.
Rom Date3/9/06
Radio 02.07.10
Which Rom would people recommend updating to?
Regards
Barry
...the worm turns.
bazza1603 said:
Which Rom would people recommend updating to?
Click to expand...
Click to collapse
Normally, this is where I say, "Start a new thread, for this new question, because nobody is going to open this thread to answer that question."
However, you've asked a question that usually results in the person asking being lambasted (read: flamed) for asking a question that is, in most cases, a matter of total opinion. As has been said many times before, about this subject:
What's best for you isn't what's best for (nearly) anyone else.
Click to expand...
Click to collapse
So....that said, I recommend you look at the Wizard Mobile 6 boards, read the Wizard wiki THOROUGHLY, and know your phone very well before you even consider trying to load a cooked ROM, or you will have an expensive paperweight instead of an incredibly useful tool.
Whatever you do, please do not post a question like "What's the best ROM for me?" because only YOU can answer that question, and only after you educate yourself to what's possible, and what your specific needs are.
If you just want to sync your phone to your car, then stick with the A2DP upgrade, and an overclock (OMAPCLOCK via SmartsKey is my preferred method of overclocking). That's my advice, free of charge.
Could anyone help me find a A2DP upgrade. I have honestly hunted, but I am getting confused...
Tried Torbado A2DP without success. I run a 02 Mini S
Regards
Barry
Hi
I have got Stereo headset now showing, but its greyed out for the radio device?
Anyone got any ideas?
Regards
Barry
I would highly recommend looking at JETWare BT Extenstion. It adds a lot of functionality that MS left out of the BT stack.
http://www.jetwaremobile.com/
Hi,
Got it working....
With other phones they were pairing automatically. If you search from the radio
Phone >menu then search, after a long wait it finally pairs...
Installed http://www.jetwaremobile.com/ which may have helped...
Thanks for everyones help.
Regards
Baz
hi all
i just bought a touch HD, its my first WM device and i have some problems with it
one if it is the bluetooth that dosent work, or i dont know how to configure it
i cant find other devices and also other cant see it
i tried before(SPL 1.14) and after i put miri ROM(SPL 1.57)
is there a solution to this?
Without mening to offend, but have you gone into Connections, Bluetooth and enabled the device to be seen?
offcourse
but the thing is i cant find others as well
do i need(or can) to install something? like a driver?
2dy said:
offcourse
but the thing is i cant find others as well
do i need(or can) to install something? like a driver?
Click to expand...
Click to collapse
You shouldn't need anything extra.
So, not only is bluetooth turned on, but it is also set to allow the devices to be seen?
What type of device(s) are you trying to connect to?
Can you tell us the main steps you are taking when trying to establish a connection?
Is this how you are doing it?
Click to watch video
yes i selected the "make my phone visible.." and turned on my bluetooth just like on the video
im trying to connect to a regular phone( samsung d880 and SE k800)
well, you shouldn't need any other program or driver. What ROM do you have?
If you want, you can try using this program (DrYar-Bluetooth v1.6) and see if it works. Can't promise anything, but you can give it a shot.
Download it at the bottom of this post.
im using miri V16 WM6.5
but it didnt worked before with stock ROM
im gonna tryu and see if it workes with other kind of devices
looks like its started to go
i think drYAR bluetooth did the trick
thx for the help
the touchflo interface for bluetooth dosent work(it dosent find other devices) but the WM one(in the advanced) does strange but i can live with it
Hmm, okay. I guess it's sort of a "half solution". Still annoying that touchflo won't do it, but I'm glad you can at least use bluetooth via other methods.
Hello buddies,
this thread is about some strange behavior of bluetooth with current energy roms. details follow...
why a new thread?
I decided to start a new thread, because it leads to nothing to discussing this topic in the main thread ... found some people who shares my sorrow, never the less there was a lot of users who hit the answer button on page 1 and report "problem xy" or "hell yeah what a nice rom"
what is the problem?
I'm not able to pair my TouchHD with my car's Hands Free system. A2DP works fine, but when I turn on the Radio Unit a small blue headphone symbol blinks in the statusbar of the phone - no pairing succeeds. If I switch to BT audio, a black headphone symbol stays resident and the media player opens for playback, so A2DP works. Installing SIM access profile on roms without built in rSAP or other various tools in addition doesn't make it work. [see "what have been done" section!]
Just used the latest MIRI-Roms (discontinued) and it works like a charm for me. After initial setup, Hands Free (version 1.5) and Wireless Stereo where installed and activated - Serial Port left out unchecked. Then a popup message informs me, that a BT-Device is trying to access phones phonebook remotly - all went fine.
as reported by other users, this behavior occurs since ~may versions of energy roms...
about the environment
Using energy's rom on TouchHD [Blackstone] T8282 [BLAC100 32M]
flashing with USPL
phone's SPL: stock SPL-1.54.0000
radio: 1.12.25.16D3 - don't see a reason to update
protocoll: 52.60.25.33U
carrier: O2 GERMAN
what have been done so far?
I've tested the pairing of my device in various cars
tested with my Renault Megane 3 integrated car kit (arkamys audio / parrot)
tested with a 2010 Toyota Prius car kit
tested with a subaru 2010 car kit
tested with Blaupunkt Toronto 400 BT head unit by phitsc
I've tried programs, suggested by the xda community
installed Bluetooth_SAP_Profile.CAB
installed BT_SAP.cab
installed Gooru_Sense_BT_A2DP_Fix_Cab_by_JVH3.CAB
installed HeadsetFix.cab
installed JetBTHFExt_1.40.CAB
reg-tweaks on "HKLM\Software\Microsoft\Obex\ObexServiceMask"
roms tried
Miri_WM65_21891_Premium_Manila_2.5_V20.0_NoHtcMessaging.rar
Miri_WM65_21893_Premium_Manila_2.5_REV22.0.rar
Energy.BLACKSTONE.23563.Sense2.5.Cookie.HomeTab.Apr.23.7z
Energy.BLACKSTONE.23566.Sense2.5.Cookie.HomeTab.May.01.7z
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.16.7z
Energy.BLACKSTONE.21903.Sense2.5.Cookie.May.16.7z
HD_Miri_6.5.X_23541_SENSE25.rar
Miri_WM65_21893_V38.0_Premium.rar
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.22.7z
(green indicates a working rom)
dear community...
please use this thread wisely for recommendations or suggestions on this topic. keep this thread a productive discussion. if you have a contact to NRGZ, feel free to report this thread, cause my afford to reach him fails.
So I hope we can figure out, why it does'nt work as it should to...
kindly regards, FS
Hi,
I have the same problem with my Touch Pro and my Megane 3.
I have to switch back to an older version of the rom then..
Hi,
I'm using Energy ROM Titanium 18may.
Radio 1.17.xxxx
No problem here with BT of my car stereo.
I had this problem untill I delete the old pairing on the car BT.
After this, the phone pair great
firespawn said:
Hello buddies,
this thread is about some strange behavior of bluetooth with current energy roms. details follow...
why a new thread?
I decided to start a new thread, because it leads to nothing to discussing this topic in the main thread ... found some people who shares my sorrow, never the less there was a lot of users who hit the answer button on page 1 and report "problem xy" or "hell yeah what a nice rom"
what is the problem?
I'm not able to pair my TouchHD with my car's Hands Free system. A2DP works fine, but when I turn on the Radio Unit a small blue headphone symbol blinks in the statusbar of the phone - no pairing succeeds. If I switch to BT audio, a black headphone symbol stays resident and the media player opens for playback, so A2DP works. Installing SIM access profile on roms without built in rSAP or other various tools in addition doesn't make it work. [see "what have been done" section!]
Just used the latest MIRI-Roms (discontinued) and it works like a charm for me. After initial setup, Hands Free (version 1.5) and Wireless Stereo where installed and activated - Serial Port left out unchecked. Then a popup message informs me, that a BT-Device is trying to access phones phonebook remotly - all went fine.
as reported by other users, this behavior occurs since ~may versions of energy roms...
about the environment
Using energy's rom on TouchHD [Blackstone] T8282 [BLAC100 32M]
flashing with USPL
phone's SPL: stock SPL-1.54.0000
radio: 1.12.25.16D3 - don't see a reason to update
protocoll: 52.60.25.33U
carrier: O2 GERMAN
what have been done so far?
I've tested the pairing of my device in various cars
tested with my Renault Megane 3 integrated car kit (arkamys audio / parrot)
tested with a 2010 Toyota Prius car kit
tested with a subaru 2010 car kit
tested with Blaupunkt Toronto 400 BT head unit by phitsc
I've tried programs, suggested by the xda community
installed Bluetooth_SAP_Profile.CAB
installed BT_SAP.cab
installed Gooru_Sense_BT_A2DP_Fix_Cab_by_JVH3.CAB
installed HeadsetFix.cab
installed JetBTHFExt_1.40.CAB
reg-tweaks on "HKLM\Software\Microsoft\Obex\ObexServiceMask"
roms tried
Miri_WM65_21891_Premium_Manila_2.5_V20.0_NoHtcMessaging.rar
Miri_WM65_21893_Premium_Manila_2.5_REV22.0.rar
Energy.BLACKSTONE.23563.Sense2.5.Cookie.HomeTab.Apr.23.7z
Energy.BLACKSTONE.23566.Sense2.5.Cookie.HomeTab.May.01.7z
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.16.7z
Energy.BLACKSTONE.21903.Sense2.5.Cookie.May.16.7z
HD_Miri_6.5.X_23541_SENSE25.rar
Miri_WM65_21893_V38.0_Premium.rar
Energy.BLACKSTONE.23569.Sense2.5.Cookie.May.22.7z
(green indicates a working rom)
dear community...
please use this thread wisely for recommendations or suggestions on this topic. keep this thread a productive discussion. if you have a contact to NRGZ, feel free to report this thread, cause my afford to reach him fails.
So I hope we can figure out, why it does'nt work as it should to...
kindly regards, FS
Click to expand...
Click to collapse
Mine works fine without any cab fix.. your pda must search 4 a car kit as a bleutotth headset! comm manager /bluetooth/ set up BT headset turn your cars BT on and there you go!! i tell yo the energy roms work fine 4 me
+ 1 here
Don-Maco said:
Mine works fine without any cab fix.. your pda must search 4 a car kit as a bleutotth headset! comm manager /bluetooth/ set up BT headset turn your cars BT on and there you go!! i tell yo the energy roms work fine 4 me
Click to expand...
Click to collapse
sorry dude, not much help but i have the same experience; all energy roms (and i do mean all of them) work perfectly with my parot CK3100 but then i do task 29 before every flash & hard reset a few times after initial setup.
in addition, i also flash the latest stock rom from htc every so often.
i know this seems a bit ott but i rarely seem to suffer the buggy issues that many others do.
hope you get it sorted
It is not about Task 29.
I had problems with access through the original multi-functional touch panel in the Ford Mondeo. When I went to CLEAN ROM, all troubles are gone. The problem is that you must agree with access on the phone. This question is not on Energy ROMs displayed. I can pair phone but can not be used for handsfree calling.
Now I have a CLEAN ROM and everything is bugfree.
To be honest, no ROM to date consistently works with the in-car bluetooth kit in our Zafira. It works flawlessly with my old phone (K800i) and my wife's phone (W950i) but it's just not stable for the HD.
If it works, it'll drop the bluetooth connection after about 15mins. It's as if there is a time-out, but I've hunted the registry and both HD Tweak and Adv. Config for anything related to this but with no joy.
My current ROM seems to be about the best so far (kwbr's WM6.5 and Manila 2.1) but it still drops the connection randomly yet other times it may keep the connection for over an hour no problems.
Seems very very strange to me, but from what I've read, it's a common issue with the bluetooth kits in GM's euro cars (Vauxhall, Saab, Chevrolet etc.)
|WWE|BLACKSTONE|¯`·.¸¸.- Energy -.¸¸.·´¯ |BlueTooth CarKit ISSUE|`·.¸¸.·´¯`·.¸¸.·´¯)
@DaRulah
what kind of rilphone / radio rom do you use - pointing my research in this direction, may that's the reason... does bluetooth depends on the used radio rom?
@raistlin74 / @Don-Maco
tried all ways possible
car to phone
htc comm mgr to car
windows BT settings to car
@superseagull
having the latest carrier rom flashed before (comes with SPL 1.54 to enable flashing of 6.5+ roms)
what kind of rilphone / radio rom do you use? [EDIT: saw it in your signature ]
@malson
well, sounds logic ... the pairing won't succeed cause the phone's dialog to allow access doesn't appear. will try it with energy's titanium rom. never the less, the outdated MIRI roms /w sense 2.5 and windows mobile 6.5 works for me
@jonifen
as mentioned, the phone is compatible with my car - in basic. simply doesn't work with energy roms.
therefore I tried it with various other systems to exclude a mismatch with my car kit
well, thanks for you participation so far - may we get the clue with my problem
regards - FS
2 options?
Why only two options yes and yes? Why not a no option in the poll? I don't have a problem with nrg roms.
firespawn said:
@DaRulah
what kind of rilphone / radio rom do you use - pointing my research in this direction, may that's the reason... does bluetooth depends on the used radio rom?
Click to expand...
Click to collapse
Radio: 1.14.25.35 with the matching rilphone
Rom: Energy.RAPHAEL.23569.Sense2.5.GTX.Themed.May.13
i don't think it's a radio problem since i used that one with older energy roms, and had no problems with my car kit.
no problems here
I tried my phone with a bluetooth carkit in a BMW X5 and found no problems with it. I use latest NRG rom 21905 with CHT and latest Radio (1.17) with Rilphone 1.15. i suggest u upgrade to those as well.
GL
As this is about a genaral pairing problem I don't know if it will help u as u seem to be able to pair but just have Handsfree problems...
But as u didn't mention how u tested out the fixes I will post this here.
Remember i had a problem once when trying to pair my HD.
Base:
- Touch HD with some newer Sense 2.5
- A2DP wasn't working or Windows Mediaplayer hooked A2DP keys
AFTER I tried to fix A2DP problem (installed some "fix" cabs u mentioned above) I wasn't able to pair anymore.
Here is what i figured out:
- To get it working again it didn't help to over-install another fix - don't know why but seems that some fixes do reg changes wich break other ones.
- I had to hard reset the device
- so never try to install 1 fix after another to figure it out
- always do 1 hardreset + 1 fix then hardreset again
- only really good working fix for me was HeadsetFix.cab I posted in NRG thread - many other fixes broke my pairing capability
Now im on:
- actual NRG 2. June MaxSense 23xxx
- HeadsetFix.cab installed (otherwise Windows Mediaplayer pops up or it doesn't work for me)
- haven't had problem with pairing since several month with any NRG Rom (before it wasn't depending on NRG but on Sense 2.5 / but just had A2DP issue - pairing issue just with wrong fixes installed)
Radios I tested were .12 and .14
Tested BT Headsets/Caraudios:
- Motorola HT820
- some Sony MEX BT xxxx Caraudio
BTW for all who are interested in - i always install "AutoA2DP" or "AutoActiveSync" cause A2DP doesn't pair automaticaly in my car - just the Handsfree pairs by default.
Mimic NRG style ROM Thread !!!!!!!!!!!!
eddyve said:
Why only two options yes and yes? Why not a no option in the poll? I don't have a problem with nrg roms.
Click to expand...
Click to collapse
Yes + 1
Why only YES and YES option ...
No problems with any BT. Myy HD conects on any BT device that i have with no problems...
*****************************************************
PS: its not nice to use for your thread title the same format and characters that NRG use for all of his roms !!!!!!!!!!!!
Its a bit confusing for regular users and misleading....
And if i was you i will change the title not to mimic NRG ROM threads !!!!!!!!!!!!!!!!!!!!!!!!!!!!
colossus
|WWE|BLACKSTONE|¯`·.¸¸.- Energy -.¸¸.·´¯ |BlueTooth CarKit ISSUE|`·.¸¸.·´¯`·.¸¸.·´¯)
@eddyve
it is a yes poll (or call it simply a counter), because I want to know how many people have a problem like me
@DaRulah
well, good to know
@TheOne741
updating my radio rom asap, just to confirm that the radio version is not the source of my problem ... I will report on this
@FrEcP
thank you very much for your detailed explaination! I also do hard resets between the fixes. I will try HeadsetFix.cab in combination with AutoA2DP on a clean rom
@colossus_r
do you have anything useful to contribute? stay on topic please!
Well, thank you all so far, I will report my progress when the mentioned tips have finished... regards - FS
mimic NRG ROM thread
firespawn said:
@colossus_r do you have anything useful to contribute? stay on topic please!
Click to expand...
Click to collapse
@firespawn: Whats the matter with you? colossus_r is on the right way. Why only "Yes or Yes" in poll. And whats about mimic NRG ROM threads?
Please choose your own style for this thread.
On topic: No problem with Siemens HKW 720 Bluetooth Car Kit at all. Im using Handsfree-Profile and rSAP-Profile.
Issues with bluetooth ...
aleskow said:
@firespawn: Whats the matter with you? colossus_r is on the right way. Why only "Yes or Yes" in poll. And whats about mimic NRG ROM threads?
Please choose your own style for this thread.
On topic: No problem with Siemens HKW 720 Bluetooth Car Kit at all. Im using Handsfree-Profile and rSAP-Profile.
Click to expand...
Click to collapse
Again, it is used as a counter aaand again: stay on topic and stop cryin' like a baby about the choosen subject! I couldn't change it anymore!!!
Please do not post things like: Oh boy, mine is working fine *smiley*, cause this is worth nothing!
Sorry, I'm a bit frustrated, because a productive research on this problem seems to be impossible...
superseagull said:
sorry dude, not much help but i have the same experience; all energy roms (and i do mean all of them) work perfectly with my parot CK3100 but then i do task 29 before every flash & hard reset a few times after initial setup.
in addition, i also flash the latest stock rom from htc every so often.
i know this seems a bit ott but i rarely seem to suffer the buggy issues that many others do.
hope you get it sorted
Click to expand...
Click to collapse
Right is right i also never had bugs since energy roms march 2010
and the opera 10 never gave issues! so some flashers are doing somthing wrong! when using titanium the rom is superbly fast i also spice things up with the htc-performance.cab.
firespawn said:
Again, it is used as a counter aaand again: stay on topic and stop cryin' like a baby about the choosen subject! I couldn't change it anymore!!!
Please do not post things like: Oh boy, mine is working fine *smiley*, cause this is worth nothing!
Sorry, I'm a bit frustrated, because a productive research on this problem seems to be impossible...
Click to expand...
Click to collapse
We cant do any research if we dont have the problem
i think you should swich the the car bluetooth on and keep it pressed till the device finds it! thats what i did on other cars
or you will have to reset the cars bluetooth as shown in the manual
firespawn said:
@eddyve
it is a yes poll (or call it simply a counter), because I want to know how many people have a problem like me
@DaRulah
well, good to know
@TheOne741
updating my radio rom asap, just to confirm that the radio version is not the source of my problem ... I will report on this
@FrEcP
thank you very much for your detailed explaination! I also do hard resets between the fixes. I will try HeadsetFix.cab in combination with AutoA2DP on a clean rom
@colossus_r
do you have anything useful to contribute? stay on topic please!
Well, thank you all so far, I will report my progress when the mentioned tips have finished... regards - FS
Click to expand...
Click to collapse
set up you bT via comm.manager. dont turn Bt on just choose set up bluetooth hdset device etc/ turn you cars bt on an make shure it is visible etc by keeping the on button pressed in while searching with your gsm and thats it i think thats how it worked 4 me and will work 4 every one too!!!
study your old rom be4 you use a new one and you will know how to recognize the differenzesss amen
I've experienced something similar with my volvo. In my case it paired sometimes and usually in a call it disconnected. This happened with all kind of roms. It all disappeared after a radio update.
Somebody mentioned 1.17... with rillphone 1.15... works like a charm!
Hope it helps
(else you can try to let a mechanic update the bluetooth software in your car)