Database Users

Bluetooth connection problem since radio upgrade!

I have upgraded to the new O2 Rom 169 and all seemed ok, until I started to install my bluetooth head set.
Since I upgraded my radio ROM to 1.03 I have lost the connections to my headset.
Prior to the upgrade it worked perfectly, now the recieve functions just will not work.
I have down graded to the radio 1.00 ROM but the same thing is happening. So the upgrade seems to have corrupted something more important.
Can anyone help here?

Downgrade to previous ROM
I have now downgraded to the previous ROM 1.11.162WWE, and that seems to have solved the problem.
I have installed the Radio ROM update and that seems to work OK now, so I will stick to this for the moment, unless someone has any better ideas!

Hello,
I had the same problem. It seems, the old bluetooth software won't work with the new radio rom. I tried my bluetooth connection before restoring my old stuff from backup, and it's ok. I didn't have any serious things in my backup, so I reinstalled my software from install cd's - sorry, I had no time to figure out, wich software causes this issue, but hope this information will help you.
Z.

i also having problem with my bluetooth but I cant say the problem is from new radio ROM or others because i dont know the real cause. A message display and wrote
"Sorry! Bluetooth can no longer be used because the licence is expired"
"BDA ff:ff:ff:ff:ff:ff: Key:E3E534E19B3E8214C543A73C0A8B9A9074DD3B1753515CD8"
after that, bluetooth will off automatically.

I have found since the upgrade to the new radio, thanks PUG.
That my Handsfree and Headset Bluetooth issues have lessened.
A few little glitches but will be on the outlook for another patch or upgrade in the future :roll:

Hmm,
I have radio 1.00.00 version with t he original Asia ROM and something funny has happened:
Since the beginning, I successfully connected to Logitech and Hello II BlueT headsets + a generic car BT handsfree.
I had to perform a hard reset after one of my progs messed the registry and reinstall everything (less the troublesome prog <g>).
Since then, the BlueT handsfree does not work properly: I hear the ring but there is no volume control from the headset and I hear nothing + mike does not work. The rest of the BT conections work flawlessly, except for some rare disconnects from my BlueT RBT-2001 GPS.
The story in this thread is not encouraging but one thing is clear - the BT problems that I have are with the original radio and EROM and not after an upgrade. I have no clue what all this means except for the fact that tere is something quite problematic w/ the Xda IIi BT connectivity that I didn't have w/ any of my previous PDAs.
I thought to u/g the radio version only but decided to go for a full u/g (less the O2 stuff), hoping that my BT problems will go away.
Please correct me if I'm wrong - should I go ahead with the PUG O2-less upgrade or should I keep the old (but clearly buggy) versions?
Maybe all the problems that we have are connected to specific manufacturing HTC batches? Has anyone researched this? Is there any info correlating between problems and Xda IIi serial numbers?
Best regrads,
Al

Bluetooth turns off randomly by itself

Hi all,
I'm running original WM06 ITA on my x7500 and I'm experiencing this problem:
when I receive a call I can't answer with my BT headset because X7500 BT is turned off even if it was on, so that I have to activate it again. So the problem is that X7500 BT turns off by itself very often in a day. How can I solve this problem? Any fix available?
THX so much!

hi
i have the same problem. this thing happens 2-5 times a day to me. the wicked thing is that somtimes it works perfect 1 or 2 days and when you think no everything is fine 'pop' its there again. fact is that bluetooth simply disappears, the indicator on athena is still blinking blue and the commanager tells bt is on, but my bt-headset (and other devices) signals that the bt connection is gone, also other devices cant find the athena any longer. i have to disable/enable bt in the commanager to get the functionality of bt back. i was thinking about returning the device for repair, but fearing the discussion of not using the original rom (the one with the superugly optical improvements of the provider ). and because maby it's a rom problem. my config is:
htc rom 2.21.407.1 (07/18/07) with extrom:2.21.407.101.
3 bt-headsets 1. sony hbh-ds220, 2. moto s705 and moto ht-820. all 3 are working fine with my universal but having these problem with the athena.
madbird

Hi...so we have the same problem...
I have the original HTC ROM just restored on my device and I have the problem. I read about it somewhere, other people with same problem but I can't remember where...

yes we are not alone i found serval posts on the net for htc and other brands like these:
http://forums.wireless.att.com/cng/...thread.id=27495&view=by_date_ascending&page=1
http://www.howardforums.com/showthread.php?t=867111
but no solutions. the only meaningful thing was for wm5, there is a fix of the bluetooth stack by microsoft (http://support.microsoft.com/?scid=kb;en-us;913683&x=13&y=14) but i did not found one for wm6.
mad

Hi guys.
I'm sorry to say that I had, a long while ago, the same problem with my Universal, and after a whole lot of tweaking, tinkering, and kinky massaging, all that was left to do was to have the device replaced. It definitly was a hardware problem, alas... :-(

I've had mine almost 4 months, stock 7501 ROM, and no problem like that ever. I leave BT turned on all the time. Sounds like a hardware problem.

been there done that fixed that
hi all,
yes, until I found the coolest und most functional BT headset, the cheapy prior ones caused same faults, even to the point of a hard reset ... why, well
no help to be found, just the notion of thinking and knowing, that the cheapy hardware out there was casuing it, not the htc.
example, some devices go into a kind of sleep mode and disconnect if not used, then while the htc still thinks its connected, it gets no reply from your other BT device. Take many SW packages or HW devices on your PC even, unplug the network and u´ll see, even they have unforseen problems ...
have fun, try HW makers like HAMA or Samsung, they rarely disappoint.
ollli

Aaaahhhh, I'm not alone.
Same problem here, but ONLY afair with WM6 (I'm using WM6, T-Mobile Germany). I can't remember, that I had this problem with the original T-MOB WM5 ROM.
Regards
Andreas

ollli3d said:
hi all,
yes, until I found the coolest und most functional BT headset, the cheapy prior ones caused same faults, even to the point of a hard reset ... why, well
no help to be found, just the notion of thinking and knowing, that the cheapy hardware out there was casuing it, not the htc.
example, some devices go into a kind of sleep mode and disconnect if not used, then while the htc still thinks its connected, it gets no reply from your other BT device. Take many SW packages or HW devices on your PC even, unplug the network and u´ll see, even they have unforseen problems ...
have fun, try HW makers like HAMA or Samsung, they rarely disappoint.
ollli
Click to expand...
Click to collapse
hi
i dont know if you read the post's above, but if you do you will see that the pda is turning off the bt, so it dont matter if you use one of the 'fantastic products' of hama (yes i also read your other 2 'advertising' posts of your overall 3 for them ). or any cheap crap stuff from sony or motorola like i do.
anyhow to came back to the real problem, i called my provider today and after explaining the problem, they suprise me with a complete hasselfree swap of the device to a new one in the beginning of the next week. when i get the new device i will test it first with the rom that installed, and then switch to the htc rom again to see if the problem returns again, i post the results here.
bye mad

Yeah, I think they're probably aware there's something wrong with some bluetooth chips, both on the Athena and Universal....

hi,
with wm6,
i have tested a BT 1.1 headset (Conceptronics) and works fine, without problems.
also, i have tested 2 BT 1.2 headsets (LG Style-i and Supertooth Nano). In the 2 cases, i have your related problems.
in my opinion, wm6 has a problem with the headsets that implements the 1.2 protocol.
all the headsets works fine with wm5.
regards

I have same problem with HTC Advantage running WM6 with LG Style-i headset ...

With my LG Style-i it keeps disconecting but with my SE BT headset it works fine (PK 3.0 Dual ROM) so in my case the BT on the phone doesnot turmn itself off, just has problems connecting.
Someone sugested a diff radio ROM might fix it - if so, does anyone know which radio does not implement the 1.2 protocol?
I'm using 1.47.51.00

hi there
i'm using my replacement athena for nearly one week now, and had not a single 'shutdown' of bt, not with the se ds220 nor with the moto 705 headset. i use the official german tmobile wm6 roms and not the htc version i used on the replaced athena. so it is not totaly clear if the change of the device or of the rom is making the difference, all other software packages are installed again. it also seems that the system is more stable overall in my every day usage, but that might be only my personal feeling.
mad
*EDIT* one more thing i noticed now is that when a call came in the sound is now played in the bt headset. before the sound came out of the speakers of the athena, and the bt headset only play its standard ringtone. seems that now everything is the way it should be .

BigDede said:
I have same problem with HTC Advantage running WM6 with LG Style-i headset ...
Click to expand...
Click to collapse
hi,
i' sure that the bt problem is due to the radio rom. i have the 1.38 radio rom and no problems with lg style. please, install it and test and report the results.
regards

bartito said:
hi,
i' sure that the bt problem is due to the radio rom. i have the 1.38 radio rom and no problems with lg style. please, install it and test and report the results.
regards
Click to expand...
Click to collapse
I have the 1.38 Radio version and I have the problem which is Bluetooth turning off by itself when using LG Style-i

ok, the problem is wm6
BigDede said:
I have the 1.38 Radio version and I have the problem which is Bluetooth turning off by itself when using LG Style-i
Click to expand...
Click to collapse

Did somebody tried to go through these update from Microsoft for WM6 ??
http://www.microsoft.com/downloads/...76-ff8d-460c-b454-6c487fd4c7d9&DisplayLang=en
http://www.microsoft.com/downloads/...c1-f0f4-4fd6-9366-b61e0ab59565&DisplayLang=en
http://www.microsoft.com/downloads/...5f-782b-4378-a228-f18af8c59aa3&DisplayLang=en

hi spiderman ,
i don't have teste (i have wm5) but the description seems don't have relation with bt stack procedures.
regards

Hardware or software
It's 4 months since last post and wondering if someone found a solution?

Bluetooth and MSVC

I am in the process of moving from a TP to a TP2, and am configuring the latter, however (and I have seen this problem elsewhere regarding this phone) I cannot get my bluetooth headset to play nice with MSVC. Specifically the button to initiate the call.
I have tried the steps listed by bengalih and all should work. From what I have read, they are using a different bluetooth stack for the TP2 which is the issue.
So I have a few questions.
1. Has anyone got the headset button to activate MSVC successfully?
2. Is there a way to change the bluetooth stack without changing the ROM
3. will changing the ROM fix this? Any way I can tell which ROMS will have a working bluetooth stack?
I have Vodafone UK branded model.
This is I think the last thing that I need to make the phone 'functional' for my daily use, and so would be really grateful for any advice.

crazyC said:
[...]
1. Has anyone got the headset button to activate MSVC successfully?
2. Is there a way to change the bluetooth stack without changing the ROM
3. will changing the ROM fix this? Any way I can tell which ROMS will have a working bluetooth stack?
[...]
Click to expand...
Click to collapse
1. Yes, with certain headsets that will allow a verrry loooong press without turning off.
2. I suppose it's theoretically possible, but I do not know for sure.
3. Yes. Some of the cooked roms work fine with MSVC and bluetooth headsets on the TP2.

Could you give examples of the cooked roms that work?
Cheers
C.

any trick or hack we can borrow from "bt-MSVCworking roms" and transplant in stock roms? maybe a skilled dev might try to do something.... PLEASE guys!

crazyC said:
Could you give examples of the cooked roms that work?
Cheers
C.
Click to expand...
Click to collapse
NRGs Genesis ROM works for me. http://forum.xda-developers.com/showthread.php?t=553506
Gordon

Flashing now and will confirm experience with my two headsets shortly.
EDIT:
Only had time to test the specific problem identified at the start - both headsets work fine now. Hurrah. I do not know the specifics behind why, or if this will apply to all 6.5 based roms. But for anyone desperately seeking a resolution the headset initiation of MSVC, using the ROM above does fix it. And so far the NRG ROM does seem good.

crazyC said:
Could you give examples of the cooked roms that work?
Cheers
C.
Click to expand...
Click to collapse
I currently use EnergyROM version 20090822 (Titanium) with MSVC 1.6.21040.

Thanks to those above for their help.

thank you for the contribution, but for who is keeping stock rom, any possible solution??? I would sell my soul for this...

A "stand alone solution" for Touch Pro2s with an original ROM would be great. Possibly one of the ROM cookers can extract it for us.
Thanks a lot in advance,
Klaus

that would be really appreciated!!!

Got it to work, but...........
Hi I have a TP2 with MSVC installed. I got it to work by editing the regsitry and swapping SDDialer.exe with voicecmd.exe. It works great. I press the button on my bluetooth headset and MSVC is invoked.
The only problem is that the voice commaned that i say has to go through the TP2 microphone not the bluetooth headset microphone. Any one knows how to direct the audio input to the headset microphone???
I am using Miri cooked ROM 23017 with manila v2.5
rgd
Raed

this bluetooth activation is a real bugger!! does the audio from VC go to the device loudspeaker, or BT headset? that would be a beginning, somehow...
any luck with cyberon voice commander yet?

cyberpunk627 said:
this bluetooth activation is a real bugger!! ...
any luck with cyberon voice commander yet?
Click to expand...
Click to collapse
Well I have the Voda version of the TP2 and I also have a spare to play with (I cracked the screen on my first one and got a new one but they never asked for the old one back - it works fine) so I loaded the EnergyROM from a link elsewhere on this thread on to it. My bluetooth headset does not work with the Cyberon Voice speed dial program which I prefer - although this ROM does alow you to put all sounds through the headset. It worked fine on my old TyTn from Voda. Like you said, this is a real bu**er!
Barry

mmmh I'm becoming more and more obsessed with this. I googled everywhere but found anything... someone reports msvc and cvc as working, someone else not.. but nobody says it's working from BT headset... blame on htc that forgot such an important thing!

cyberpunk627 said:
mmmh I'm becoming more and more obsessed with this. I googled everywhere but found anything... someone reports msvc and cvc as working, someone else not.. but nobody says it's working from BT headset... blame on htc that forgot such an important thing!
Click to expand...
Click to collapse
It's all true
I understand that on the Telus ROM MSVC works with Bluetooth out the box
MSVC and CVC do work, UNLESS you want to use Bluetooth, when they don't (with stock ROMS in the EU) ;-)
I'm using MSVC on NRGs Genesis ROM and it works from Bluetooth as it should. If I get a Chance I'll install CVC and give it a try and report back.
Gordon

it would be nice if someone can mange to transplant needed files... I like the bluetooth stack on TP2, really better than usual, but this thing needs more attention from HTC and the 3rd party developers.
msvc is 3 years old as of now, no newer versions, same as cvc... too bad, technology evolved a lot it 3 years, and these programs might improve really really much!! especially the recognition algorythm, and functions.
well, I hope the new wm6.5 will bring some BT improvements for TP2 then...do not want to stick with custom roms yet. keeping my fingers crossed!
should you manage to try, let us know about cvc and make a little comparison for us! you lucky! ;-)
cheers

I´m usign Smaberg´s Touch X "HERO" EDITION and VC works just fine.

GordonTGopher said:
I'm using MSVC on NRGs Genesis ROM and it works from Bluetooth as it should. If I get a Chance I'll install CVC and give it a try and report back.
Gordon
Click to expand...
Click to collapse
As my touch screen has died I am without a TP2, so I can't do this for the moment
Gordon

I've had this problem sometimes on my VZW CDMA Touch Pro 2. my solution has been to turn off the headset and turn it back on. It seems the problem starts for me when I have the headset on when rebooting the phone. Possibly MSVC doesn't detect the presence of the headset or something to that effect.

Bluetooth BMW and HTC HD2

Hi
I have a BMW X5 and a HTC HD2 with the newest ROM. When I enter the car, HD2 is recognised automatically by the car and I can place phonecalls dialing from my HD2. The only thing that does not work is that BMW tries to upload my phonebook from the phone but it does not get it. BMW says "please wait" - forever.
Before I flashed the ROM, this worked. Anyone has any ideas? I would even pay for someone in Zurich who comes and fixes this. One thing I could do of course is to downgrade my ROM again. But before I do this, I want to explore any other options.
Thanks a lot!
PS: jetwaremobile.com definately does NOT work on HD2

I have exactly the same issue. The HTC HD2 works ok for calls etc but the phone book upload is "please wait" forever. Very annoying. I have the standard up to date ROM and BMW X5 2009 model. Any help would be great.
Thanks
mrickenbach said:
Hi
I have a BMW X5 and a HTC HD2 with the newest ROM. When I enter the car, HD2 is recognised automatically by the car and I can place phonecalls dialing from my HD2. The only thing that does not work is that BMW tries to upload my phonebook from the phone but it does not get it. BMW says "please wait" - forever.
Before I flashed the ROM, this worked. Anyone has any ideas? I would even pay for someone in Zurich who comes and fixes this. One thing I could do of course is to downgrade my ROM again. But before I do this, I want to explore any other options.
Thanks a lot!
PS: jetwaremobile.com definately does NOT work on HD2
Click to expand...
Click to collapse

So any ideas? Now we are already two you can make happy! Thanks

Hey..
I don't have a BMW neither a bluetooth radio BUT i somewhere read in this forum, that there is a fix, to let the hd2 be recognized as normal phone
I know I'm not that much help , but I hope u can find the thread here good luck =)

HD2_Noob said:
Hey..
I don't have a BMW neither a bluetooth radio BUT i somewhere read in this forum, that there is a fix, to let the hd2 be recognized as normal phone
I know I'm not that much help , but I hope u can find the thread here good luck =)
Click to expand...
Click to collapse
I have a 2008 BMW, and I did experience this the first time..I sat there waiting for a few mins adn then got bored...but after I had turned the car off, been away and come back..it transferred straightaway.
Funnily enough, when I had my iphone (yes..sorry) I had the little image of the phone next to the BT signal on the display. I don't get this straight away with the HD2, but it always eventually appears..and then stays there until I hard reset my phone and do a ROM upgrade and then start the pairing again..where I just get the BT signal...then randomly..a few weeks later, the phone image appears again....very odd

Works fine here with a BMW 5x from 2008.. Using miris 6.5.x ROM

Funnily enough, when I had my iphone (yes..sorry) I had the little image of the phone next to the BT signal on the display. I don't get this straight away with the HD2, but it always eventually appears..and then stays there until I hard reset my phone and do a ROM upgrade and then start the pairing again..where I just get the BT signal...then randomly..a few weeks later, the phone image appears again....very odd
Click to expand...
Click to collapse
Hi, I also have a 2008 BMW (E93) and I do see the phone logo. It also syncs about 250 of my >3000 contacts. With my TyTN2 I used "Jetware Mobile" to sync just one dedicated category. But that doesn't work anymore with MinMo 6.5

schrej said:
Hi, I also have a 2008 BMW (E93) and I do see the phone logo. It also syncs about 250 of my >3000 contacts. With my TyTN2 I used "Jetware Mobile" to sync just one dedicated category. But that doesn't work anymore with MinMo 6.5
Click to expand...
Click to collapse
oh yes it does!
in fact, this is the only thing that works in Jetware with WM 6.5 - nothing else works in my case
i have a 2005 X5

bmw
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )

zipolly said:
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
Click to expand...
Click to collapse
Which ROM do you use 1.66? or earlier? With my earlier ROM I had no problems, but since I upgraded to 1.66 (German), the phonebook does not transfer...

Bluetooth auto control problem
I can’t control my bluetooth (on/off) when using Inesoft phone profiles/controls; I have also tried other programs but no success(in another program the window of bluetooth was disabled); through all programs, I could control phone, WIFI, and gprs but not the Bluetooth. The only way to turn the Bluetooth on/ off is the Comm Manager (Manually); could anyone help please. Thanks

2006 bmw
I use the latest 1.66 wwe rom off t he htc website with no problems at all .

zipolly said:
I use the latest 1.66 wwe rom off t he htc website with no problems at all .
Click to expand...
Click to collapse
thank you, I am glad it worked for you...you must have a newer generation ULF than me then.
Is your phone HD2? mine is Toshiba TG01..I have managed to make it work 50/50 of the times, but I do not know WHAT CHANGES are between it working and not working...it is very frustating to know (and experience it working) that it can/should work, but not being able to

I have a new HTC Mini HD and have the same problems with my 2009 BMW 3. BT Headset function works just fine, but iDrive keeps trying to sync the telephone book, unsuccesfull. Instead, my phone's battery gets drained. Anyone any sollutions?

Unfortunately I don't have an answer for your question, but it sounds like it might have something to do with the bluetooth stack used for that ROM/Radio not being recognized by the car. Perhaps the layer that deals with data transfer is removed. Sorry I can't be of more help here.
What I can do to help is to offer a warning. I am a former BMW Client Advisor, and have been told many, many times by service technicians that using phones which are not specifically approved by BMW can affect your car's ECU (brain) and if it needs to be repaired or replaced, it will not be covered under warranty. That could be just nonsense to force you into buying only phones which BMW has tested (or vendors have paid for a marketing fee), or it might be spot on, in which case you run a pretty big risk.
Hope this helps.

OK, problem solved. BMW updated my carsoftware to its newest version last week and now my HD2 works perfectly with my car (again). I can make calls AND my phonebook is synced as well.
Hint1: Try if your phonebook sync problem exists with the SIM contacts as well as with the phone contacts
Hint 2: worldwideweb.bmw.com/com/de/owners/navigation/bluetooth/compatibility_check_intro.html

a_petrov303 said:
oh yes it does!
in fact, this is the only thing that works in Jetware with WM 6.5 - nothing else works in my case
i have a 2005 X5
Click to expand...
Click to collapse
zipolly said:
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
Click to expand...
Click to collapse
Hi All,
I have a BMW X5 2005 model. I can pair the phone OK but it constantly disconnects and reconnects once the transfer of the phonebook occurs. The phonebook transfers always start from scratch when this happens and nothing gets loaded to the car's phonebook.
If a call comes in, or if I make a call while it is connected (like within 5 seconds) the phone stays connected for the duration of the call.
I have tried all the Regisrty tweaks and none change the behaviour.
I also read it is because the HD2 uses Widcomm BT stack and not the MS BT Stack.
Zippolly and a_petrov303 and all those that have it working, can you please tell me which Rom you are using? I am using the latest Energy's 6.5.x rom. i noticed someone mentioned Miri's 6.5.x Rom works.
Thanks,
Rob

I have a 07 E60. The HD2 pairs fine, synchs contacts fine, but the sound quality is so bad it's not useable. Of course bmw says it's not a compatible phone, but I think there is a problem with the car as my Diamond won't find it, even though it is supposed to be supported

its mainly due to the car bluetooth, BMW etc don't make the car kit mostly siemens do and they are slow on the uptake of doing updates.

anybody found a snap-in for the hd2 yet?
I have a 7-series F01 and it is really annoying to have to deal with that usb cable...
Ontopic
I had the BT problem too, deleting the profile and repairing the phone did the trick for me...

Bluetooth not working right with Pioneer and Android

I've been using Androind on my HTD for +/- the past month or so, and have yet to have stable bluetooth operation through my Pioneer AVH-3200BT which is enabled for BT phone calls (NOT A2DP). I've been through several builds, and currently am using shu8i's latest shubCRAFT 1.4d (23.08.2010 build). I'm got HPSL3 and Radio 2.12.
I get a lot of forced close app errors with trying to establish BT connection. Sometimes I get further, like the Pioneer can usually pick up my contact list after a few tries... But the worst happens when I try to make a phone call. The system hangs, the sound goes dead, the Pioneer cancels the call, and the HTC HD2 usually crashes back to the home screen. From then, I usually dont have any sound for anything until I reboot the HD2.
In WM6.5 Bluetooth works fine with the Pioneer.
Can anyone help me out with this? I'd be willing to pull some logs / demos / or get more vital information if I knew where to look. I'll be the geinea pig!
Thanks in advance

I'll add plantronics voyager 815 to list. maybe a list of working headsets might help if anyone has one.

my Jabra T3030 doesn't work either. It works great with A2DP and it even rings when i get a call. but it hangs the device if i try to answer and there's no audio in calls.
I tried every build possible

I cannot get my Bluetooth wireless headset to work also ,it works on phone calls but on media ,no sound is transferred ,Ian using Mattc 1.6b with sonyericsson headset ,that works more than perfect on windows
Sent from my HTC HD2 using XDA App

saabguy123 said:
I've been using Androind on my HTD for +/- the past month or so, and have yet to have stable bluetooth operation through my Pioneer AVH-3200BT which is enabled for BT phone calls (NOT A2DP). I've been through several builds, and currently am using shu8i's latest shubCRAFT 1.4d (23.08.2010 build). I'm got HPSL3 and Radio 2.12.
I get a lot of forced close app errors with trying to establish BT connection. Sometimes I get further, like the Pioneer can usually pick up my contact list after a few tries... But the worst happens when I try to make a phone call. The system hangs, the sound goes dead, the Pioneer cancels the call, and the HTC HD2 usually crashes back to the home screen. From then, I usually dont have any sound for anything until I reboot the HD2.
In WM6.5 Bluetooth works fine with the Pioneer.
Can anyone help me out with this? I'd be willing to pull some logs / demos / or get more vital information if I knew where to look. I'll be the geinea pig!
Thanks in advance
Click to expand...
Click to collapse
I got similar problem with my Motorola Headset too, it just keep hanging with the dialer, without bluetooth one, the dialer works flawlessly. Mine is Shubcraft

I think I figured it out... I set the pioneer to accept connections with pin 1234 instead of 0000 and it seems to be working alright now.
Sent from my HTC HD2 using XDA App

precsmo said:
I got similar problem with my Motorola Headset too, it just keep hanging with the dialer, without bluetooth one, the dialer works flawlessly. Mine is Shubcraft
Click to expand...
Click to collapse
I'm also having troubles with my Sony Ericsson MW600. I did get it going with I think ShubCraft 1.4b but now on 1.5 it won't have it...
It pairs fine, works fine with Media - AVRCP controls working, etc.
But the phone app just doesn't like it. I've tried to switch BT on and off whilst in call and most of the time get a force close on the phone app.
My libbluetooth.so files are dated 04/08/2010. Does anyone have later dated .so files I can try? Or earlier ones for that matter!?
Thanks all.

wheeliemonster said:
My libbluetooth.so files are dated 04/08/2010. Does anyone have later dated .so files I can try? Or earlier ones for that matter!?
Thanks all.
Click to expand...
Click to collapse
I've changed libbluetooth.so for this one:
http://code.google.com/p/androidobex/downloads/detail?name=libbluetooth.so
it work's but the hd2 ask for the bluetooth pass every time that connects.

magnus48 said:
I've changed libbluetooth.so for this one:
http://code.google.com/p/androidobex/downloads/detail?name=libbluetooth.so
it work's but the hd2 ask for the bluetooth pass every time that connects.
Click to expand...
Click to collapse
I can't even get the bluetooth radio to turn on using this file...
Not having bluetooth headset is the most frustrating thing. Well its a close second to nearly every android build claiming to have bt working in the OP but it doesn't work!!

bhilgeman said:
I can't even get the bluetooth radio to turn on using this file...
Not having bluetooth headset is the most frustrating thing. Well its a close second to nearly every android build claiming to have bt working in the OP but it doesn't work!!
Click to expand...
Click to collapse
I've tried changing the libbluetooth, libbluetoothd and libbluedroid files time and again with Shubi's build and nothing works.
I had some success today though. I'm currently using Shubi's build but with the michyprima r10 kernel.
I was trying a different kernel earlier - the huanyu OC kernel from here:
http://forum.xda-developers.com/showthread.php?t=777921
This got my BT headset working for calls and A2CP/AVRCP...
PLEASE NOTE: This kernel is in beta still, read the thread!
Unfortunately, it proved to be a little unstable for me, so I've had to go back to michyprima's kernel.
But it does seem that the problem lies in the kernel, rather than the bluetooth libraries.

bhilgeman said:
I can't even get the bluetooth radio to turn on using this file...
Not having bluetooth headset is the most frustrating thing. Well its a close second to nearly every android build claiming to have bt working in the OP but it doesn't work!!
Click to expand...
Click to collapse
A reboot is required after overwriting libbluetooth.so file
With some old android distributions I cant turno on the bluetooth radio, but it was a kernel matter. Maybe updating the kernel solves the problem.
Now I use FroyoStonev2 with this [kernel][.32.9](BFS+BFQ+AXI+OC+UV) build on 09.09.2010(version 0.2)
But every time that reboot the hd2 need to pair with the freehands.
Every time that reconnect it needs to reenter the code.