http://cgi.ebay.it/FRONT-CAMERA-REP...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
does anyone knows if the above cam is suitable for our tytnII? please help me!!!
A+++++would Buy Again
After reading the description I would say no. But, you should ask the seller. He will probably say yes, and when it doesn't work, you can leave -FB.
the tytn has 3 version according to wiki. only the tmobile mda vario ii uses a .3 megapixel front facing camera like the tytn ii. so no, probably wont work
thank you
Thank you for the answer i didnt know that the kaiser uses a 0.3 mpx front cam...
Damned spammer...
Related
I need to know which type of lcd screen is in HTC Herald.
I was looking for it but I found nothing
If someone know it or know where is some info about it and could help me I would be really glad of his help.
Thomas
At the moment only HTC can fix that device. Check on website in support section, or try and find a number for the UK location where the international warranty is still valid.
WE can offer this LCD
For the LCD of HTC Herald/p4350,right now have three editions:SONY ACX357AKM8(p/n60H00062-00),Toppoly TD028TTEB2,Hitachi unknown model name.
If some one want to buy this LCD,please contact me.
Hello,
i need the Sony LCD, because mine (P/N: 60H00062-00M) is broken
Can you tell me what it costs with(without) the touchpad ?
Thank you !
Everyone having the same Problem:
Check out ebay.com and ebay.cn - Very competitive Prices !
pda parts
hi, we have all kinds pda parts , including iphone , htc , blackberry, palm tro and so on , for 60H0062-00M , pls feel free to contact us online by :[email protected]
thanks .
p4350.s1
twinwiu said:
I need to know which type of lcd screen is in HTC Herald.
I was looking for it but I found nothing
If someone know it or know where is some info about it and could help me I would be really glad of his help.
Thomas
Click to expand...
Click to collapse
hi, we have all kinds pda parts , including 60H00062-00M , feel free to get any price by msn: [email protected]
I do not want to start a new thread because it seems like what I have to say is related to the thread. I have a total of two T-Mobile Wings and I got both phones at different times. I got my first Wing about 2 months ago and I just got my 2nd one about a week ago. I flashed both phones to Tran's 4.5 PointUI with similar settings. However, I realize in comparison that the week old Wing has a much dimmer backlight compared to my 2 month old Wing with the same exact backlight settings. I thought it might have been the battery so I swap the batteries and still my older Wing has a much brighter backlight. Is it a quality difference or is my Wing defective? I'll take a couple of snap shots if possible later. I just got my Wing about a week so I assume I can get an exchange in their 30-day policy by T-Mobile?
I have a Tilt, which (I'm sure most of you know) AT&T has intelligently decided to have HTC remove the front-camera from - ya know, the one that would make a video call possible...
Anyway, I found an HTC original TyTNII/Kaiser housing with the front bezel with the video 'hole' on it on CNN.CN for $70, and was wondering if anyone knows where I could get the camera portion of it, and if this conversion is possible? I already have Dutty's pre-departure WM6.1 ROM on the phone, so I'm anticipating that the ROM is capable of it - just not the phone.
Any success stories, testimonials, ideas, advice, words of caution or other?
TIA,
M
You know, of course, that the AT&T network doesn't support video calls -- that's why they didn't select the 2-camera version of the Kaiser.
3waygeek said:
You know, of course, that the AT&T network doesn't support video calls -- that's why they didn't select the 2-camera version of the Kaiser.
Click to expand...
Click to collapse
No, actually, I didn't know that...I thought video sharing was possible with it...I guess I just assumed that meant even live video.
Well, nevermind this thread then!! Stupid AT&T.
Thanks!
- M
Actually, it'd still be useful to know how easy it is to do it. Considering I'm currently using the Tilt in a country that does support Video calls...
i would be interested to know if this was possible as well
It would be great to know this, simply because it makes it easier to take self pictures and use your phone as a webcam. In fact, maybe we can get a seperate Kaiser 3 megapixel camera and stick it in that front cam area.
I personally think that it is not this easy to do and the costs propably would exceed the amount you saved by buying the Tilt Version of the Kaiser
Samson711 said:
I personally think that it is not this easy to do and the costs propably would exceed the amount you saved by buying the Tilt Version of the Kaiser
Click to expand...
Click to collapse
Maybe...but to be honest, I bought 3 HTC's with cracked LCD's on Fleabay (8125, 8525, and the Tilt) for Under $400....then I fixed and resold the other two, and ended up with a 'Like-new' Tilt for about $120....Consdering what I would have paid new, I think I saved a lot more than just the difference between a new Kaiser and what I'm 'into' my Tilt for.
Sorry - just started fixing HTC's and felt the need to boast a little....
- M
Congratulations! Though changing the screens is trivially easy on HTC phones... all you need is a torx wrench and some courage...
so the quest continues.....does anyone have any inner knowledge of the tilt that can shed some light ?
A lot of guys upgraded the Cingular variant of the Blue Angel to add the missing back camera. Might want to check there for inspiration.
When you had the tilt open did you see a "socket" where the camera should be? If so then it might be as easy as the BA upgrade was in which case the hardest part will be finding the camera plug-in piece for sale.
If I'm not mistaken, when I changed out the case on my 8525 (Hermes) it had the "drop-in socket" for the front facing camera. I believe I even spent some time trying to track one down to plug in for the same webcam reason.
Just to shed some light on this topic.. all ATT varients are HTC boards and have the connector for the front facing camera. The only hard part is finding one.
Enigma_cpl03 said:
Just to shed some light on this topic.. all ATT varients are HTC boards and have the connector for the front facing camera. The only hard part is finding one.
Click to expand...
Click to collapse
yea same thing where could we get the front cam i just ordered the new case and want to get the camera. please pm me if you know where i can get one.
I remember in the hermes forum somebody had installed the forward facing camera on their 8525 and it was just plug and play, no soldering needed (i think theres also a thread at hofo). But obviously you'll also need to flash a WWE rom that supports video calling.
I was gonna do the same and buy the orange case from cnn.cn but the camera is nowhere to be found, i'm gonna shoot an email to cnn.cn other than that i'd suggest searching on ebay fora damaged tytn ii.
Also for video share, its going to be one way from the camera on the back. For example, if i video share call someone :S then they'd see what my rear camera is recording but i can't see anything from their camera.. i guess its just a way to milk us for our money.
Just out of curiosity, would you even neccessarily even need a Kaiser front camera? I'm guessing that any camera from the same spec from any HTC (and probably other brands) should work.
Well to be completely honest with ATT network, the front facing camera would allow a video conference call only in a 3G blanketed area due to the fact that it would be the same lines as a video share that ATT offers. It would require a simultaneous voice and data connection.
I have been thinking about doing this myself. I looked through the service manual and found that it listed the P/N as 54H00225-00M. I am not sure where to find it but possibly from a repair facility or something. I would love to have that front camera, hopefully someone will figure it out.
You wouldn't need the front-facing camera just for video calls. You could use it to take pictures of yourself when out with a group.
does at&t networks in the US even support this feature even if you get it to work?
hi there guys
i need urgently help...
i have CIngular 8125 (WIzard 100) and a G3 model...
the mbo is dead and i should switch for a new one..
but the problem is in my country i can find only mbo's from MDA Vario...
will there be any difference if i put a Vario mbo in cingular? i can see the outfit of both PPCs is different but i think the mbo's should be same in those models... or no?
what to do? please tell me!
thx
cmon guys, i dont believe no one knows an answer for this...
please, tell me the answer... its urgent...
thx
Well,as both devices are manufactured by HTC with same specifications and feature,same processor and ram,I believe yes it wud be possible,only if it fits properly into the body(front & back covers) of the cingular and screws and all the connections get aligned,Overall,its basically the same devices,only differ in the shape,Hope it shud work fine
I would also agree with that as long as the motherboard and the screws line up correctly (towhich they just might and htc had given them different shells) all would be good in the land of nod.....
-rastlin
zabardast_1 said:
Well,as both devices are manufactured by HTC with same specifications and feature,same processor and ram,I believe yes it wud be possible,only if it fits properly into the body(front & back covers) of the cingular and screws and all the connections get aligned,Overall,its basically the same devices,only differ in the shape,Hope it shud work fine
Click to expand...
Click to collapse
Hey I've been searching for places to find a replacement for the vga camera on the front of my phone, but I cant find anything. I've found a few people linking to places that no longer exist, but i can't find anything....
Does anybody know where i can buy one of these?
It may help to know the following:
The front camera is manufactured by the Liteon Corporation of Taiwan:
http://www.liteon.com/page.aspx?id=4cdd6857-1b68-4eec-82c2-3d612c9b866f
It may be worth checking with them to see if they supply direct through their on-line Service Contact page:
http://www.liteon.com/Services.aspx?id=34a8d337-1424-4c7a-b219-80a96f109207
The Front Camera Module is:
Liteon Part No: 05P019
HTC Part No: 54H00157-00P (HTC list no alternatives for this component)
Mike
that reminds, me.......i emailed them like a month or two ago, when u first posted this info......bastards didnt reply obviously
mikechannon said:
It may help to know the following:
The front camera is manufactured by the Liteon Corporation of Taiwan:
http://www.liteon.com/page.aspx?id=4cdd6857-1b68-4eec-82c2-3d612c9b866f
It may be worth checking with them to see if they supply direct through their on-line Service Contact page:
http://www.liteon.com/Services.aspx?id=34a8d337-1424-4c7a-b219-80a96f109207
The Front Camera Module is:
Liteon Part No: 05P019
HTC Part No: 54H00157-00P (HTC list no alternatives for this component)
Mike
Click to expand...
Click to collapse
thanks for the links, but its all in taiwanese or whatever...
XtreMe_G said:
that reminds, me.......i emailed them like a month or two ago, when u first posted this info......bastards didnt reply obviously
Click to expand...
Click to collapse
thats a little disheartening
lupes5 said:
thanks for the links, but its all in taiwanese or whatever...
Click to expand...
Click to collapse
On the top line of the site is a small box with Eng - click that and you will get the site in English.
Mike
Ok, so I'm thinking of buying my friend's ATT 8525, but he had a malfunction with his camera so he had to remove it. Right now I have a Cingular 8125, could I take out my camera and put it into the 8525?
Thanks in advance!
tdunham02 said:
Ok, so I'm thinking of buying my friend's ATT 8525, but he had a malfunction with his camera so he had to remove it. Right now I have a Cingular 8125, could I take out my camera and put it into the 8525?
Thanks in advance!
Click to expand...
Click to collapse
Well only if it's the same part No. Download the manuals for the two phones and look up the parts - it'll show you pictures as well. You can get them here: www.mikechannon.net
To be honest I think you'll be very luck if they are the same part. I'd be more curious about what he did with the original camera and what fault it was that made him remove it completely. You can probably get a second hand camera pretty cheap off a parted out Hermes on the net. There are a lot of broken Hermes out there with white screen issues so I guess there are lots of parts available. Might even get the part from someone here.
Mike
Yea, I'll look up the manuals and if not, I'll check for parts on eBay.
Thanks for the input!