my phone stopped at bootloader when i tried to install new room
i tried to install new original room it stopped at 1 % and make restart and stop on boot loader again
please help me what can i do
Have you tried rerunning the ROM?
start by a presentation of you + reading existing thread about the probleme by using search button.
Did you install Hard-SLP?
how to rerunning the room please help me i dont hnow what can i do
Which one did you tried? did you installed hard spl ad someone else already aked you...
Read this:
http://forum.xda-developers.com/showthread.php?t=381600&highlight=rom+loader
no i dont install hard spl
so ,,,,
what can i do now
install hard spl
install hard spl
Related
Help I cannot get my 8525 off the tri colored screen. I have been searching thru these forums but have not found the right combination.
It is set up for WM6 and att
did you press the reset button and it still comes back to this tricolor screen?
if resetting doesnt work, hard reset, if that doesnt work then yu may have to reflash os. My suggestion would be using the sd card method as all you need to do is be in bootloader with a fat32 formatted memory card and the .nbh file of your favourite rom installed on it and renamed to "hermimg.nbh". hope this helps...
stuck in bootloader screen
my phone...said no signal...I couldn't even open the phone pad ....then my sim did not show.....I tried soft resets several time.... nothing would help I noticed under device info it would not show radio version or rom version..... so I downloaded a fresh version or att 6.0 wm.. and tried that to see if it would help... while installing it stop @ 11 percent with error code.262 tried several times and nothing still same thing..... is their hope.... can I install a cooked rom... or is my phone dead I hope not but you guys are the best....can anyone please help......
dr71399, sounds as if your radio has had it... try to fix any bad blocks on your phone with MTTY first(do a search in upgrading for instructions) first then try to flash a radio only rom, if that doesnt work you should do a search for others that have had their radios corrupted and see what is suggested. Sorry to be the bearer of bad news but most people find once that happens its a brick, not that you cant flash an os only rom to use as a PDA.
If your phone is still under warranty then try to put the original rom back on and return for warranty but thats all I can think to do... See if a chef can fix up an os only rom for at&t or try to do it yourself.
I'm new in these forums as well I'm new with flashing ROMs so obviously I messed up flash process and my device stuck in bootloader (tri-color) mode. This post I address to those unfortunate like me .
# Symptoms #
- ROM flash started and stopped at 17%. After recovery flash process stucks at 0% and pops Connection Error 262. Device is stuck in bootloader mode not possible to flash anything, hard reset does not help, flash from SD card does not help either.
# Possible cause for that #
1. In bootloader mode device shows:
Code:
Pola100
SPL-1.25.0000
CPLD-2
means that Hard SPL was not flashed before flashing ROM file (if Hard SPL was flashed then in second line will be written SPL-2.20.Olinex.).
2. Connection between ActiveSync and device was not established when flashing ROM file.
Before to go any further please take your time and read Polaris Wiki to get familiar with glossary and acronyms used here.
PROCEED ONLY if flashing original ROM does not help, hard reset does not help and flash from SD card does not work.
# Solution #
1. Download MTTY software.
2. Kill ActiveSync (Press Ctrl-Alt-Del and stop rapimgr.exe and wcescomm.exe processes).
3. Plug Polaris into usb port (Plug directly not through hubs).
4. Start MTTY after chose USB from PORT dropdown list (if it is not listed there then ActiveSync processes were not stopped).
5. in window type: set 16 0 (enter cmd mode)
6. after type: task 8 (this will format phone)
7. after type: task 0 (this will restart phone. Not always necessary)
8. soft reset
This procedure can damage your phone. Use it as last resort.
Official source in french here.
Now before flashing any ROMs read carefully how to flash (not install!) Hard SPL.
# P.S. about install and flash termins #
This error with flashing happened to my due misunderstanding between notions of installing something on your device and flashing. In my opinion those are completely two different things. As for first I understand of running some cab or exe directly on device. So problem comes when people sees install Hard SPL en device as they try to find some cabs or exes to install directly on device or they just copy all files to device. To make things clear Hard SPL "installation" actually is ROM flash process which must be done with maximum caution, but those who did not read Wiki won't understand it.
Cheers, whitealien
BiG THX @ Whitealien.
works to 100% on my Touch Cruise.
I flashed under Vista Ultimate...
# Solution # ... addition from me for Vista users!
....
2. Start Windows Mobile Device Center and Deaktivate USB Connection and then start Task manager end kill
Process wmdc.exe.
Rest of whitealien. and have fun!
Thank you!!!!
I had given up on this, and was sure my only option was a warranty repair :O
always welcome
Thanks, you've saved my Polaris.
Mine didn't want to react anymore to the soft reset, so I replaced your instruction 8 with:
Cmd>boot
and that did the trick.
whitealien said:
1. In bootloader mode device shows:
Code:
Pola100
SPL-1.25.0000
CPLD-2
means that Hard SPL was not flashed before flashing ROM file (if Hard SPL was flashed then in second line will be written SPL-2.20.Olinex.).
Cheers, whitealien
Click to expand...
Click to collapse
I had exactly the same problem, for whatever reason went back to original SPL before HARD SPL.
I solved my issue by using back the original original HTC RUU_signed.nbh and flash it using the CustomRUU.
Thereafter, repeat the entire HARD SPL and flash the home cooked ROM.
Cheers.
For unbricking your HTC Polaris, you can try also a hard-reset (if it is related to a software error):
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
Thank you very much
you really helped
thank you again
mrfone2003 said:
Thank you very much
you really helped
thank you again
Click to expand...
Click to collapse
you are welcome.
Seems people are still falling for this error.
I'm has this error.
Solution (with SPL-2.20):
- kill ActiveSync (process, not uninstall)
- cable to USB on motherboard
- hard reset on phone
- connect to cable
- flash OFFICIAL rom
Two time I revive my Polaris.
help me please
hi.I have a big problem with my htc touch cruise when I installed a hard spl htc dedicate a Diamond.donc I had a white encrant after I did a hard reset since my htc no longer I have a black encrant are neither green nor orange but when I connect with the pc I am data interface and it does not recognized my htc. In my pay is not qualified repairman three non réparé.aidé unable to please me I tried the commands mtty.exe but does not c I do not really know how it works.
thank you for your patience and for help
thanks for the support
Thanks dudes for the great help you gave to recover my htc dual from bootloader screen. I am very happy to have my phone back. Thanks for everybody for the help they have provided generously. I appreciate alot. infact thousands times.
I think i have really messed up my phone. When opening mtty i select USB and press ok, then it says "can not open USB Port"
please help me, i have all the symptoms you explain. Stuck in bootloader, POLA200 SPL-1.25.0000 CPLD-2
i cant flash any roms and the original rom stops at 39%, i have redownloaded it countless times so its not the rom.
aaront1988 said:
I think i have really messed up my phone. When opening mtty i select USB and press ok, then it says "can not open USB Port"
please help me, i have all the symptoms you explain. Stuck in bootloader, POLA200 SPL-1.25.0000 CPLD-2
i cant flash any roms and the original rom stops at 39%, i have redownloaded it countless times so its not the rom.
Click to expand...
Click to collapse
Did you follow all steps from 1st post?
Did you kill all running ActiveSync processes?
I did indeed, i'm on vista so didnt have those particular processes going but followed the step from Aeroman and it still doesn't want to play. Any ideas?
managed to find a working XP machine and it worked a treat. Thank you so much.
thanks,this solved my pb
please help
Im having the same problem, im stuck in the bootloader but i didnt do anything for that to happen....this happened all alone withount any try to flash or do anything
it is saying
POLA100
SPL-1.28.0000
CPLD-2
when this happened i tried sodt reset and unpluging the battery b4 reading and searching here.
now i tried the steps showing in the first post and step by step .... the devise restart to the same bootloader like i did nothing ((( oh god im so upset please help me .... what to do ((((
wesram said:
Im having the same problem, im stuck in the bootloader but i didnt do anything for that to happen....this happened all alone withount any try to flash or do anything
it is saying
POLA100
SPL-1.28.0000
CPLD-2
when this happened i tried sodt reset and unpluging the battery b4 reading and searching here.
now i tried the steps showing in the first post and step by step .... the devise restart to the same bootloader like i did nothing ((( oh god im so upset please help me .... what to do ((((
Click to expand...
Click to collapse
What did you do to get there?
whitealien said:
What did you do to get there?
Click to expand...
Click to collapse
hey, im sorry for the late reply. it didnt notify me and now after posting several times asking for help in many threads by accident i bumped into this thread again to see that u answered and thank you so much.
now, what i did? this is the wierd thing, i didnt do anything, i went and back to see my phone stuck in bootload .... after this i tried almost everything i can find. from ur solution to flashing original rom to hrd spl to .........
now all gave an error except the original rom (polaris.1.28.415.2), it did went to 100% and device restarted to take me to my nightmare .... another bootloader screen am i suppose to search for polaris 1.28.0000?
i still have now the same writing shown.
please help me with this, its a nightmare .... is it totaly dead???
i managed to catch what it is saying b4 bootload screen (only when SD card is in place) it says no image file was found!!! in a very fast way and go to bootloader. in case the sd is not in place nothing happens and it goes straight to the bootloader
This is the story:
I bricked my phone (Elf) because I didn't CID unlock it after installing the Opal 6.1 rom. So when I tried to install the backup ROM I made it got bricked. I read all the threads about how to revive the phone and I can't get any to work.
I can't do the GoldCard since I don't have a working WM phone. So I tried the Wild card unbricker ROM and the phone got worse. Now I only get to the tri color screen without any "RUU" at the top and every time I try to flash another ROM on it it shuts and I get an error message saying something like "Invalind vendor or error in image" etc... Please help me, what happend??? I cant flash any ROM. I cant do hardspl. I can't do anything.
PLEASE HELP ME! Anyone who's familiar to this problem?
Thx in advance!
am using artemis p3300 but when i flashing uspl at 99% it shows upgrade failure now pda will be dead i cant go bootscreen too is any solution to back to boot screen? help me
Hi,
what do you mean by bootscreen? Windows boot screen or Artemis' bootloader (tri-color screen)? First of all I would try a hard reset, here's how to: http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
Did you try to flash USPL with this? http://forum.xda-developers.com/showthread.php?t=311403
You should at least be able to enter bootloader..here's an interesting thread:
http://forum.xda-developers.com/showthread.php?t=306904 .
Sorry I can't help more, i never experienced a similiar problem but I'm really curious to see it solved, waiting for some guru to help
sorry sir if i put battery inside pda will be start heating i cant switch to tri colour bootscreen havent money to buy a another pda am going to mad and am a looser.
Use MTTY to reset flash, the install the official rom for your device.
device never switched on is there any way to switching power on my device htc artemis p3300
bricked artemis goes mtty to reset the flash please give link here
how can i mtty to reset my bricked artemis please give me the link to download the file.
Hello,
I recently found back my hold HTC HD2 and when I tried to start it up..It just hangs on the HSPL/SPL coloured screen. When I first powered it up HSPL by Cotulla was on it and it always ran Android.
So I download the Stock Windows Phone ROM from the Internet and installed it, but it still hangs on the HSPL Screen. So I installed the Stock SPL but I didn't help..
Can someone please help me? I really want to use the phone again but it seems there is a problem. There still is a SD-Card in it which has 4GB...Can someone please explain me how to get the phone back to Stock windows phone?
Can someone please help me?
Try removing sd card.
If still same issue leave sd card out & reflash ROM from links below.
flash hard spl 2.08
http://forum.xda-developers.com/attachment.php?attachmentid=522724&d=1298224028
flash htc rom
http://www.androidruu.com/Leo/RUU_L..._Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
* If it a T-Mobile USA hd2 (red endkey & green callkey) then use that model ROM linked below
http://www.androidruu.com/Leo/RUU_L...adio_15.42.50.11U_2.15.50.14_LEO_1.5_Ship.exe
When rebooting also use the soft reset button next to battery & try it a few times if unsuccessful first time booting.
Maybe useful thread > http://forum.xda-developers.com/showthread.php?t=1344958
load of ROM links (working) , tools & HD2 useful info > http://forum.xda-developers.com/wiki/HTC_HD2
I had the same problem bro, do you want android or windows on the phone?
I want the original Windows Phone back on it.
Mister B:
I followed your steps but it didn't fix the problem. When I start up the phone, the three coloured display shows up and it says 'Serial' on the bottom. Tried the reset button several times and even holding down both Volume-buttons to Hard Reset the phone, but it didn't fix the problem.
The phone always worked fine, what is the problem?
Have you tried doing Task29(full wipe) via HD2 toolkit?
Yes, I already tried Task29 before flashing Hard SPL and Original ROM. I really want to get the Phone working again so my Mom can use it!
Hopefuly someone can help my out with this annoying and weird problem.
After installing the stock rom, what did the phone do? Did it restart to the HSPL screen?
Yes, it restarted back to the HSPL screen. It also shows 'Serial' on the bottom and when I connect USB cable It shows 'USB' on the bottom.
Try flashing stock rom from sd card rather than via usb & see what results you get.
I tried flashing the Stock ROM from the SD-card but it didn't help. It still is stuck at the SPL-screen showing 'Serial' on the bottom when I start up the phone.
Which exact ROM do I need to use for a Netherlands(Europa) HTC HD2 (NON-TMOUS!)?
I hope to hear back from you as soon as possible!
Can someone help me please? Tried everything!