I saw a dialer cab on here and I installed it, after I restarted my phone, right where it shows the password screen, or the info screen, it freezes right there!
what do I do??!?! i am exoecting a call tommorow from my job...
I NEED this phone up and running!!
If you can't do anything, hard reset
Related
Ok, Ive got a new problem with my XDA Exec.
Opened it up and tryied to turn on the backlight and nothing. tried a soft reset, nothingtried a hard reset now it just sticks on the splash screen, the red writing comes up on the right and side and just hangs there forever!
Please help
You're stuck. apparently the only remedy is turning it in to repair. For most of us it is under warranty.
Just off the phone to 02. Theres sending me a new one via courier on monday. it's less than a day old.
Is this a comon fault with the Exec?
erm ... I managed to experience this problem.
I was trying to uninstall SPB GPRS thingy that comes with the O2 package, and it just wouldn't go. I ended up deleting the program files and getting an error when it started up, so I deleted the GPRSNotify file under Startup. It never worked again ...
I got the splash screen, tried soft and hard resetting and various permutations (including standing on one leg and while holding breath) ... nothing. Did try to install fresh ROM, but startup wouldn't get far enough to let PC load ROM over USB.
Ended up contacting O2 who sent me a nice shiny new one, as it was only three weeks old. This time I haven't installed GPRS monitor thingy, and I don't intend to fiddle with it again ... or at least until I've forgotten my lesson ...
Sorry i ment to give you guys an update on this. I did manage to get it working again, although i still accepted the new one the sent to me.
What i did was installed a new rom off the 02 website. at 1st the computer couldnt see the phone so wot i did was enter what i think was the programming side of the phone. i found the instructions on how to this on the net. i think i pressed the 2 soft keys and the light switch while pressing the reset switch with the stylus (i think that was the buttons but unsure as i cant find the page again) when the screen light up again there was some faint writing on the screen with the word serial or usb. Double clicked on the rom file and 30mins later my phone was revived.
Funny it was the gprs monitor that i too installed before the phone screwed up? ive since installed it again on the new phone and have had no problems with it since.
trickydickyd said:
I think i pressed the 2 soft keys and the light switch while pressing the reset switch with the stylus (i think that was the buttons but unsure as i cant find the page again) when the screen light up again there was some faint writing on the screen with the word serial or usb.
Click to expand...
Click to collapse
Otherwise known as Bootloader mode
Aye, thats the one.
Cheers
Hey guys,
ActiveSync wasn't finding my phone last night, so I soft reset it. When it started up, it's stuck on white screen (where the blue, windows mobile screen should be). ActiveSync cannot see the phone at all.
I've read the post: http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
I've put it into bootloader menu (SPL 1.09) and connecting the USB cable changes "serial" to "USB"
Windows XP finds "HTC USB Sync" device and ActiveSync's wheels start turning.
A few seconds later, ActiveSync stops wokring, saying the device can't connect.
All I want is to recover my SMSs, the rest I don't care.
Is there a way to connect to the phone's files in 'HTC USB Sync' (bootloader) mode??
*crosses fingers*please say yes, please say yes*
All the best,
Dax.
i have the same problem!
I managed to upgrade to 1.09 while stuck in this white screen... is there any fix to the white screen?
The other forum post didnt work, tried the battery off for 20mins, the usb plugged in with no battery (phone doesnt even turn on this way)
none work
please help you brainy guys
Have you tried to flash from SD card... There is a guide i WIKI.
yeah, I had to hard reset and lose my data
i also have the white screen. it just died one day, at the time i didnt even know about roms and i'd never heard of this site.
any help getting it mended would be well appreciated.
Hi Toppy,
Try pulling battery out, other than that, only thing to do is a hard reset.
Sorry
Details for a hard-reset should be easy to find on this board.
Great reason to backup frequently.
(I use PIMBackup 2.5 everynight at 4am and sbp backup twice a week at 4:30am)
a blank screen
heyy guys i have the same problem with my screen, i bought a new one in ebay, after installed the new screen, i turned on the phone, the screen works fine, but when i turned off the phone and change the sim card, then when i turned on the phone again the screen was in blank!!!
guys if you can help my please i will aprecite it!!! i cant live without a touch screen
Creation magic,
Did you follow my suggestions?
My phone gives me white screen every now and then when I reset it. I simply reset again and it's fine.
Seems to occur more frequently the longer I leave the phone without total formatting. (It's Windows - it needs ocassional formatting)
about my white screen
when i turn off the phone and turn on again my screen appears in blank but when i did a hard reset my screen works fine!! i don't really understand my htc 8525 hahaha he is crazy and the call button and end call button doesn't work.
thanks
thanks guys for help me and everyone here in this forum!!!
you're a real brainy guys
After having installed the latest wm6 from the update. followed by hard rest I got to screen alignment and it seems to keep asking align screen which I have done over 20 times and I can not get out of it even with new hard set.
Any sugestings or help please.
I forgot to mention the center point is some times not responding.
Thank you
I had the same problem, but found that if you can remove the HTC Album then you can align like normal.
I have the same problem on a wizard.
After a while I realized that there must be something wrong with the hardware.
Whenever I turn the screen on, it opens the Message pane, or whatever is configures on the right top hard button. Then if I turn it off and on, it moves to Outlook . Next time to MMS, etc.
Then, when I press the center button, it opens the align screen, but after I finish aligning, it works fine for a while.
I tried Flashing it many times, with differnt rooms, even the offial ones, and it didn't solve the problem. I also tried dismounting it all, talking all the parts apart and nothing.
Anyboday has any clue about this?
make an oem that auto aligns the screen in personal oemizer. See if that works. So that on the initial boot from hard reset it skips that screen.
I did it on mine and it worked fine but I also never had a problem aligning the screen with the kitchen either.
Hi all,
I was messing with wmwifirouter on my touch hd and it hung for some reason and i had to soft reset my device. i pressed the power button and switched it off when the confirmation dialog came up. however, when i turned it back on, it would go past the smart mobility screen and the fone gets stuck in the htc screen. the windows mobile screen doesnt show up and it just would go past the htc screen. the charger respords well and wen i wait for sometime and when i press the power button for sometime, it gave me the confirmation dialog sound. but there was nothin but the htc logo on the screen. maybe something is going on behind the screen, but when connected to usb it wudnt detect on active sync. and wen i pressed the reset button under the battery cover, it was stuck at the htc logo screen before it showed some msg asking to press send button to restore factory default settings cause the device wasnt shut down properly or an untrusted app was installed (this is basically wat it said, not word to word.)
so can anyone help me? there is some texts i really badly need to back up.. anything other than a hard reset? please help. thanx in advance.
If you can't get past bootloader screen looks like your only options is to flash rom or hard reset
yeah i just hard resetted and everythings back to normal.. its a pity, i just lost around 4000 txts from my gal..
Appu said:
yeah i just hard resetted and everythings back to normal.. its a pity, i just lost around 4000 txts from my gal..
Click to expand...
Click to collapse
:/ thats a big loss.
Ive been backing up all my contacts, text messages from summer 2006 htc wizard till today with jeyo mobile companion.
Keeping xls files in AES, RAR encrypted files for safety
Have lost maybe 50 messages at max in that time because of some vista failures and Touch Diamond got stolen in Bulgaria.
Hi there...
I have topaz with official 6.5 rom!!! I have the s2U2 lock program and suddenly when i tried to unlock my phone I couldnt even slide the bar... It seems like the screen doesnt accept my finger . No seriously when i restarted my phone (battery out and turn on again) and i tried to input the sim code i pressed the screen and nothing happens, and then eventually the screen locks with s2u2 and again no sliding to unlock....
I dont know what to do... anyone help????????? thanx in advance
You can unlock when removing the stylus too. (Unless you've turned that off in the settings...)
Then uninstall S2U2.
Not sure why it's not working for you.
If the screen is not working at all, you can try a hardreset. If it's still not working after that, then return it under warranty.
If you are out of warranty for some reason, you could always try to replace the digitizer, very easy to do
I tried sth else instead, i connected the topaz with my pc and accessed the files of s2u2, and pretty much f*cked them up!!!!! so everything is ok!!!