Hi there...
I have topaz with official 6.5 rom!!! I have the s2U2 lock program and suddenly when i tried to unlock my phone I couldnt even slide the bar... It seems like the screen doesnt accept my finger . No seriously when i restarted my phone (battery out and turn on again) and i tried to input the sim code i pressed the screen and nothing happens, and then eventually the screen locks with s2u2 and again no sliding to unlock....
I dont know what to do... anyone help????????? thanx in advance
You can unlock when removing the stylus too. (Unless you've turned that off in the settings...)
Then uninstall S2U2.
Not sure why it's not working for you.
If the screen is not working at all, you can try a hardreset. If it's still not working after that, then return it under warranty.
If you are out of warranty for some reason, you could always try to replace the digitizer, very easy to do
I tried sth else instead, i connected the topaz with my pc and accessed the files of s2u2, and pretty much f*cked them up!!!!! so everything is ok!!!
Related
I used the S2u2 lock for my sprint TP2 which looks like the i phone lock and it seems to work fine at some points but quite frequently when i unlocked it my phone just completely froze and the only way i was able to get it running again was that i had to physically take the battery out and put it back in. Is there anyone that can help me fix this problem if not a link to a similar lock that works for the Sprint TP2?
Just reset it, and it work just fine. You dont need to take the battery off...
Ask in S2U2 thread, you might get more help there.
Sometimes when i try to unlock my phone the screen wil remain black and the buttons will light up? Is this because of S2U2?
Its really annoying so if anyone can help id appreciate it
i have the same issue with the standard windows lockscreen, so i dont think it's S2U2.
is there anyway round it? Its so annoying
Could you tell us a bit more please? Are you using the phone in a case? Are the sensors at the top of the phone being blocked off when you are trying this operation?
WB
No it isnt in a case, and ive checked that nothing is blocking any of the sensors, sometimes a few button presses and it will come back on and other times it wil take 10 to 15 minutes to work agian
If not the case then could be a recently installed software programme causing your problems.
Think back on your installation history. If necessary deinstall the items you suspect, soft reset, then reinstall one by one and see which item causes you the problem.
WB
i did a hard reset not long ago, and it still played up right after, could it be any of the changes in the registry?
Hi,
i have a strange issue with my screen lock.
First, the new wm6.5 started unlocking in my pocket. i found out that sometimes when i pressed the screen in the upper left corner it unlocked ( so without sliding). To resolve this problem, i installed smartlock to turn back to the classic wm6 lock. This works, but the phone is still "trying to unlock" sometimes. for example, when i have my phone laying on my desk with the lock on, it sometimes out of the blue shows the unlock screen, like i pressed "unlock" . .
this is not a really big issue, but the real problem is that when I'm making a call the phone starts to lock / unlock in a rapid tempo, like its going crazy.. the only way to stop this is to do a soft reset..
I already tried a lot of different Roms, made hard-resets and reinstalled HardSPL 1.83 but nothing seems to fix this issue..
is anyone familiar with this problem and its solution?
Kees
Probably a hardware fault, go to your warranty center to have it checked.
thanks for you reply! I was afraid if this answer.. Guess I'll send it in!
Hi all
first post and i got an interesting problem with my phone which i qualify as stupid. It all started when when my virtually keyborad started becoming unresponsive and when i tried to do a factory reset, i could not enter the 1234 number to start it. i left the phone for a while and then i could not get into the setting even . But i could receive calls but i could not call since i could not access any numbers on the dial pad( by pressing on the numbers of coruse but from dial log screen i could)
Anyway long story short while fiddling with the phone , i thought the lock feature was on that is why some of the touch functions was not totally responsive but to my sadness, i activated the lock and now the phone is stuck on the front page and i cannot access anything since i must press unlock at the far corner of the down screen but stupidly, while pressing on the unlock, since it is unresponsive, i cannot unlock the phone to get to the normal menu and so on.The only thing working is the square pad which tells me to press cancel then unlock to free the phone for normal use
By the way the lock feature is the one that blocks the phone so that you do not accidentally press on the touch screen and activate a program and not the lock thing operators put to limit your phone
I want to know if anyone can help me unlock the screen so that i can reset the phone or alternatively any other method via usb to reset my phone to factory settings. Any special buttons on the phone i can do to do that?
I tired leaving battery out for 24 hours but that did not work to unfreeze the touch buttons
Was thinking to reload the windows mobile completely via the micro card (which i read here) but i am not sure it will work or i fear it might brick my phone
Any suggestions will be welcome please.... thanks
Use myMobiler to control device from Pc through usb
Good luck
Ps: you'll probably have to change digitiser afterwards
Well tried the mobiler but the thing is that it asks the phone to allow the program to conenct and i cannot press yes on the touch screen since it is frozen or something so i am stuck again.
Very strange, it doesn't ask anything on my device...
Why don't you hard reset: press green and red buttons and while pressing, poke the stylus shortly in the reset hole then release the 2 buttons. It will ask something that you probably won't see, just press the action button and wait for it to restart.
Don't flash another on just yet - it may well cause issues as it sounds like your digitizer is broken. Don't hard reset either
Does it pick up anything at all? Have you tried tapping all over the place in that region to try and get a response, sometimes just under the screen also works. Do you use a screen protector? If not, try it with one, if yes, try it without, it may be interferring with it, or it may help the touch be picked up by the phone (Stupid, I know, but this is something I found to work before with my elfs, and omnias)
When it is locked, is activesync picking the phone up? You may be able to put the remote.exe into the windows folder (for myMobilier) and do it that way.
A digitizer costs about £6-£10. But due to the age of this device, as sad as it is, I would suggest trying a new phone out if funds allow for it.
ok so far i tried the hard reset (red button and green and pressed the on off button but nothing. When i press on off button alone it switches off but not hard reset. I did not know i had a reset hole at the bottom of the phone.I did that with red and green button but nothing. Only when i poke the hole alone it does a hard reset i think but when i switches back on it is still unresponsive and locked screen
I tried poking under screen protector nothing. Also i think screen is still responsive because when i tap on it, the screen lights brighter
I tired putting remote exe file on the phone( active sync is working and i can read files on the phone) but i have two remote files..which one to use ? the one that ends with 40 one or 50 .Also where to put it specifically..which folder.I tried my windows mobile based device but nothing.Also tried program files and data application nothing.
Mobiler cannot connect since from pc alone because it asks my phone permission
and i cannot tap yes to accept program.
so any more suggestions please
Hi
Maybe I wasn't clear enough, here's the exact procedure, it should work since you have to use only hardware buttons:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
If Hard reset doesn't work then your device hardware is faulty.
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Avanisha. If you try to run one of the remote.exe it will say this is not a valid windows application, thats the one that needs to go into windows on your phone.
captainstu72 said:
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Click to expand...
Click to collapse
Hi captainstu72, i was under the impression that he messed up something in his system so a hard reset would hopefully solve the problem. In case he still can't align the screen after HR then he has to replace the digitiser. Mymobiler will not solve anything, pls read the 1st post: he wanted to do a factory reset. He just have to sync before HR.
thks tito 12..problem was solved with your help.J ust did not get the steps of hard reset right. Phone is working ok now and screen is ok as well as tap function. thank god i don't need a digitizer. thanks to captainstu72 for the help as well .You were right tito..seems i ran a program and then all hell broke on my phone. I wanted to factory reset but as you know the pad was locked.
Glad I could help, enjoy your device
Ahh okay, guess i mis read something! Sorry
Glad its all sorted though, I was just concerned he may end up in an annoying align screen loop
Hello you all
I've got a strange problem with my HDmini :
Sometimes, the screen stops responding !
I can touch any button, the screen in any place, nothing happens.
I only have to remove the battery ( because thre is no reset ).
After strated again, when PIN code is asked, if a tap on "3" for exemple, it is like if i have tapped on "6" ; if i tap on "erase", i see "cancel" highlighted !
And after a few minutes, everything becomes normal again.
An idea ?
Did you install any cab or custom settings?
Yes, i'm using throttlelauncher with WP7 theme but when the screen is stuck, i have two choices :
Remove the battery to start again, without throttlelauncher started .
Restart the HTC with Mymobiler if the HDmini is connected.
At the end, the problem stays on.
I only have to wait for some time and then the touchscreen works again... by itself !
I haven't tried Throttlelauncher yet. I don't know if that can be the possible culprit.
Bart3385
For example, yesterday and today everything was OK and 5 minutes ago, the screen has stuck again !
Nothing possible to do on the screen neither with the 5 keys at the bottom !
I have to connect the HDmini to the PC and reboot it with my mobiler;
then i can use the screen interface.
It seems that the problem is the touch screen !
francois64 said:
Bart3385
For example, yesterday and today everything was OK and 5 minutes ago, the screen has stuck again !
Nothing possible to do on the screen neither with the 5 keys at the bottom !
I have to connect the HDmini to the PC and reboot it with my mobiler;
then i can use the screen interface.
It seems that the problem is the touch screen !
Click to expand...
Click to collapse
Try to ask for a new device (if it's still under warranty )
bart3385 said:
I haven't tried Throttlelauncher yet. I don't know if that can be the possible culprit.
Click to expand...
Click to collapse
Maybe your device is blocking so hard that your keys and screen both don't work anymore. I have had that too once Maybe Trottle causes this?
Madmatt
The problem is to be sure that a software is the problem origin; before i ask for the PDA to be replaced by my operator.
Try to do hard reset. Install only the basic stuff. (Minus Throttlelauncher.) See if the phone goes back to normal.
_Madmatt said:
Try to ask for a new device (if it's still under warranty )
Click to expand...
Click to collapse
That's a possible option.
Somehow, i'm not allowed to make that kind of suggestion anymore. Someone keeps on following me and make a mockery whenever i mention anything like that.
Anyway, try to check software problem first. As i first did on my own device. Before i've ascertained it is defective hardware.
francois64 said:
Hello you all
I've got a strange problem with my HDmini :
Sometimes, the screen stops responding !
I can touch any button, the screen in any place, nothing happens.
I only have to remove the battery ( because thre is no reset ).
After strated again, when PIN code is asked, if a tap on "3" for exemple, it is like if i have tapped on "6" ; if i tap on "erase", i see "cancel" highlighted !
And after a few minutes, everything becomes normal again.
An idea ?
Click to expand...
Click to collapse
It is normal, sometimes, it doesn't respond, lame htc hd mini. I have this problem long ago.
Thank's for your suggestions.
Today, the phone is completly stuck.
That's why i don't think it is a software problem.
I can' even entry the PIN code.
i've tried a Hard reset, to flash back to Original Rom = nothing more.
So i've asked Orange for an exchange under garanty...
That's a good move.
In some areas, a high percentage of units need replacement.