Hi guys,
I had a problem with my HTC Home plugin... I reinstalled another version (hermes 2.1) which didn't work perfectly (no profile icons). I then installed another version (Kaiser) which worked fine. I noticed that I had the other one still in my installed SW list and I removed it.
Apparently something went wrong here because now my phone gets stuck in "enter pincode" screen... the touchscreen responds (ligths up) and the stanby mode works as well but I can't enter my pincode (not even with the keypad). I can't connect to it anymore with my cable.
Anybody any ideas on how I can access my phone again??
Thx!
Berre
Assuming you took a backup before you started playing, I would suggest a hard reset.
You did use one of the free tools available here for backing up, didn't you?
One learns these things the hard way (I speak from experience).
Can you still use active synv?
Smiffy.
Off course I didn't
Well I didn't think I could crash my phone by un/reinstalling a today screen... My only mistake was that I didn't disable it before I started "playing"
Indeed lesson learned, in the meantime I've performed a hard reset and I'm reinstalling all my sw/tweaks
This topic can be removed
Thx
Berre
Related
HELP NEEDED!
Yesterday I bought a Hermes (Vodafone 1605).
Everything was fine, I installed Opera and tried the wi-fi.
Then it locked and there was non way for turning it off. So I made a soft reset and I found out it hangs on the vodafone splash screen.
I tried a hard reset and nothing changed.
I can see some codes in the lower part of the screen as it tries to boot up but nothing happens.
I looked up some threads and tried to remove the battery for 20 mins.
It actually went over the vodafone splash screen but only to halt on the windows mobile one.
The thing that puzzles me is that I didn't mess at all with the ROMS!!!
It's exactly as it comes from the box.
Any advice and help is more than welcome....
Thx in advance
A few more details
I've been trying to get my Hermes working.
That's what I found:
Taking away the battery for some mins and hard resetting brings me to the windows mobile screen then it hangs
The same procedure but soft resetting instead of pressing space actually let the phone start but then it hangs on the screen: "Tap the screen to configure ...." etc. etc.
Still trying to figure out what's happening.
Anyone with some ideas please help me. I don't want to play with the ROMS till it's strictly NECESSARY. I can't understand why it's stopped working.
Now it works...
Repeated the procedure, soft resetting instead of pressing space.
It went smoothly and run all the Vodafone customization programs.
Now it's off and charging.
Don't know yet what was the problem. Hope it's not a problem of stability.
I'm starting blaming myself for leaving my old Tungsten.
Does anyone experienced something similar? May depend on some particular operation?
Curious, but Hermes sometimes needs to settle down. Suggest you try the following to avoid hangs/freezes as well:
http://forum.xda-developers.com/showpost.php?p=1078848&postcount=2
Mike
I think it's the well known freeze problem...
My Hermes worked fine for a while. Then I synced it and installed Magic Button. Everything looked perfect. I left it for a while and when I came back it was off and it won't go back on. Soft resetting just causes a freeze on startup.
I guess it's some problem with activesync. I tried the fake server but I'm not sure I didi it properly. I'll try again once I wake my Hermes back up.
Hope to solve this, otherwise it's almost unusable.
It keeps freezing...
I'm getting really worried.
After some hours of normal use I experienced the "won't wake up" problem.
The strange thing is that soft reset doesn't solve the problem. Neither does the hard reset.
When I tried to soft reset it went to the bootloader page.
I need to remove the battery for about 20 mins and try a hard reset.
Sometimes it works with space reboot, sometimes it need the soft reset restart.
Then it freeze after some time.
When it doesn't work it freeze on the vodafone splash screen after showing the version numbers at the bottom of the screen.
I'm quite puzzled.
It's a brand new V1605 with S/N HT645.
Maybe that's more than an issue on it.
Any chance to improve this with a ROM upgrade?
As your device is brand new with the its original ROM, I would take it back to the store you purchased it and ask for a replacement.
They should swap it for you right away.
Not so easy..
I'd like but I bought it from ebay.
It's a brand new Vodafone UK VPA1605, but i don't think I'm eligible for any assitance (even paying) here in Italy, even if Vodafone Italy sells the same PDA.
Now I'm not even able to start it. It keeps freezing on the vodafone splash screen.
I tried several hard and soft reset (even removing the battery for 1/2 hour or so). What I cannot understand is why it's so unpredictable? It's electronics.
It should just work or doesn't work, till you change something (software or hardware).
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
thierry86 said:
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
Click to expand...
Click to collapse
Since no hard reset is available... try removing the battery for the whole night.
If you do manage to get to windows then watch out for the startup folder, you're probably overloading the memory at startup.(htc home and psxut eat a lot at startup and windows as well)
i have removed the battery, sim and sd, and just left it there the whole night, but it still won't go further than the windows boot screen...
any suggestions ?
is is possible to do a hard reset by connecting it to usb and enter the bootloader somehow ? if yes, how ?
thanks!
hi,
have you tryed entering bootloader by the normal process?
"Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camera + Soft Reset, then release soft reset and keep pressing camera button till appear the Boot Loader.)"
regards
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
Okay then there is still hope.. When you have connected the device run an opdate tool like the NVID WM5 Rom.. that should work as a hard reset..
are there any working links available for this ? rapidshare seems to have disabled this...
thanks!
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
As long as you are able to enter bootloader then you can flash it with any old prophet rom. I had the same issue after installing WM6 rom. I used a Spanish rom on wiki to bring it back and then installed WM6 VII touch. So far it has worked well for a week.
HTC 6tab Home screen killed my 818pro!!!!!!
Here is what happened a few days back. My 818pro (aka prophet) suddenly heat up while not in use 3 days ago. I thought it was caused by the hot weather in my country (I was driving with aircond in full blast). The heating up eventually go away. Then 2 day later, after I put down a call, my phone just frozen / hung. Hence, I do a soft reset & guess what It never recovered & stop at the black screen with the dopod logo while restarting. Some service centre I visited told me that the main memory chip need replacement & reflash!!! I can't even see the window screen. I have use the HTC 6tab for 2 months & I am very sure it's the culprit here. Hopefully you are not having the same problem like me
Try plug in the ac charger before u do soft reset. My phone need it in order to restart after soft reset (after I started using the HTC 6tab Home Screen).
That is before my phone die yesterday
I have a HTC Wizard (Cingular 8125) that i bought several months ago. I SIM and CID unlocked the phone, installed T-Mobile's software and upgraded windows to a custom Mobile 6.5 build i got from this site. The battery was near dead the night before so i plugged it in and went to bed, woke up the next morning started using it and the windows record utility kept popping up repeatedly and recording. so i shut the device off and went to work for the day, came home and turned it on and it was stuck on the "Press Sent to restore factory default, Other keys to quit" None of the buttons work, i can take the battery out and put it back in as soon as i turn it on it returns to this screen, if i plug it in it returns to this screen. i have tried to hard reset, soft reset, charging the battery further, etc. nothing seems to work. Any advice/comments would be highly appreciated. I still owe money on this phone and im not quite ready to give up on it yet...
i just got it to sorta work this morning, keys are finnicky and software runs real buggy, im gonna reinstall windows and see if that solves it however i believe it is a hardware issue. any opinions?
once i got it going i hard reset it and updated all my software. appears to be working fine now. my build of windows must be to blame or a undiagnosed hardware problem, not sure just happy it works again
what happened?
dsabin2011 said:
once i got it going i hard reset it and updated all my software. appears to be working fine now. my build of windows must be to blame or a undiagnosed hardware problem, not sure just happy it works again
Click to expand...
Click to collapse
didnt understand...
plz explain ince again what´s happening with your phone ok?
i will try to help (if i can)
Good luck!
WM6 doesnot boot up
i upgrade the wm6 form wm5 on htc wizard ( cingular 8125) but after reset my device does not boot . i tried to reset again and again but the device does not work. It just freezes and does not do anything. Plz help
Hi,
I have got my trinity phone one year ago and never had a problem since last week. When starting my phone, it stops on the first screen (with "orange" logo) and nothing more happens.
I tried to reset it without succeed. The phone is not detected by the "activeSync" to make it flushable.
Help please !
Yves Florent CK
my problem is mor or less the same... only that dont apears any image on screen and the green led is constantly on...
I have loaded a long time ago an old version of ROM Gelly.
This ROM worked perfectly to a friend who suggested to do the same with my trinity.
The PROBLEM is that when i try to open the pda it freezes to the first srceen showing the rom version and after....nothing!
I tried to load again Gelly from the bootloader, it begins to run, it runs about 1% then the trinity makes a flash (this means it loses the connection with the pc) and then shows me again the first screen....
Please i need help!
me to. i try install the rom original and my pda is living again.
try this to
hi,
2 things ...
have you tried a hard reset ? (hold both softkeys & hit reset button)
and when flashing:
when you first run the rom upgrade from PC with phone on Activesync, it is quite common for phone to hang at the bootloader screen ...
worry not -
just re-run the upgrade from PC again immediately, without disconnecting or attempting to switch phone off.
(the word USB should be visable on device under the coloured bars)
if you do get hung up at bootloader screen a hard reset should at least get you back to where you were, and you can try re-flash again.
hope this helps,
regards,
Kevin
My trinity won't work anymore...
Hi all!
My trinity wont't work anymore. When i press the ON/OFF-button, the display is lighten up a bit, then the buttons are lighten up. And nothing more.
When i will go to bootloader mode, it is the same.
And when i will to a hard reset, the trinity ask me to press SEND or END key for restore factory default or cancel. When i choose the SEND key, on my display some ridicoulous letters appear, but nothing more.
When i try KITL mode, everything is the same.
Can someone help please?
Because i can't do something on my trinity
EDIT (maybe this can help my helper ):
After some time, the display and the buttons are not lighten up anymore.
When i try to charging the battery, it only works, when the buttons are not lighten up (when i switch on, charging is ok; when the display is lighten up a bit, charging is ok; when the buttons are lighten up, charging won't work; when the display and the buttons are not lighten up anymore after a time, charging is ok)
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
never mind... problem solved... tks anyhow
weezer_88 said:
never mind... problem solved... tks anyhow
Click to expand...
Click to collapse
ok solved...
Can you tell how you did it?
Thanks
weezer_88 said:
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
Click to expand...
Click to collapse
But my trinity don't go to the boot screen, nothing on the display but lighten up slightly...
Nevertheless, can you please post, how you solved your problem?
THANK YOU in advance!
I downloaded the original Rom windows mobile 5 from http://www.htc.com/www/SupportDownload.aspx?p_id=3&cat=2&dl_id=111 then entered in KITL mode, connected the usb and reinstalled the original Rom, and all was fine...
I'm so mad at my xperia - first the cracks in the case, then the vibration stops working (ok that was my fault), then the keyboard starts repeating letters..
But now I gave up and went back to my old phone, because my xperia makes a hard reset once a week.
First it starts to act weird - some shortcuts aren't working, it won't open opera, some buttons are missing, and the hardware buttons aren't working (i can't even end a call or make it go to standby).
So after I make a NORMAL reset, everything is erased, I have to align the screen, date and time etc.
I can't use it anymore, and I don't know why this is happening? Maybe I have flashed my phone too many times?
Has anyone the same problem, and PLEASE can anyone help me with my problem?
Oh btw - I use Itje's Touch-IT Black Xperience, build 23563.
Seems more like a hardware faillure... Well you can try this, it is called task 29, then reload your cell with a new rom using the sd card method.
Task 29 http://forum.xda-developers.com/showthread.php?t=649230
SD Card Method http://forum.xda-developers.com/showthread.php?t=445662
Thanks for your answer!
I've done what you said and everything went fine. I hope it stays so.. If not, i'll post back (in a week at the latest )
Good luck =P
Unfortunately only 1 day after using it I tried to send an MMS. Of course it didn't work (it never does) and after coming back to the home screen I tried to open the comm manager. The shrotcut didn't work, neither did any other shortcut.
After a reset the phone wouldn't even boot up, it got stuck after the sonyericsson splash screen.
Once again I'm using my K800i.. Anyone got an idea what else I could try to fix my Xperia?
HARDWARE - flash stock rom and SPL and send it back to Sony Ericsson