Hello, i have the following problem.
Symptoms:
I have installed Artemis touch 4.02 Rom and it was working well for about 5 or 6 months.
I had icontact, idialer and spb mobile shell installed for about a month and int turned my 3300 a little slower.
In the last week the artemis turned it self off for about 3 or 4 times and the rebooting was very slow like it freezes on 6.1 green splash screen.
Yesterday i tried to install manila 2d and it said memory too low, althought i try to install it on my 2gb microsd card.
Today i´ve removed spb shell and Idialler and when i rebooted the 3300 it freezes on the green 6.1 splash screen.
What shoul i do??
I´ve tried to reflash but i need to activesync to run uspl cid
Helllllp
u can load the bootloader, cant you? search how to bro
ayyu3m said:
u can load the bootloader, cant you? search how to bro
Click to expand...
Click to collapse
Yes i can, but i can´t run the cid unlock because it wont activesync, and i don´t know what original rom was in it.
Related
Hi
I recently flashed my XDA Orbit with the excellent Artemis Touch 4.02, all worked well but then i had difficulties receiving calls and sms etc so i decide to repeat the flash process. I then restored (stupidly) my previous system using Spb Backup and now i cannot connect in any way to activesync to reinstall the Artemis Touch rom - can someone please help me...Thanks. As you have probably guessed i'm a newbie so please be gentle..
reinstall the original rom and after that cid unlock the device and flash it again with the Touch 4.02.
Go for artemis touch lite with cube which is an excellant rom. Even better than artemis touch vanills. I am using it since last 30-40 days without a single problem.
ehtone said:
Hi
I recently flashed my XDA Orbit with the excellent Artemis Touch 4.02, all worked well but then i had difficulties receiving calls and sms etc so i decide to repeat the flash process. I then restored (stupidly) my previous system using Spb Backup and now i cannot connect in any way to activesync to reinstall the Artemis Touch rom - can someone please help me...Thanks. As you have probably guessed i'm a newbie so please be gentle..
Click to expand...
Click to collapse
First of all try to hardreset your phone "press both softkeys and softreset at the same time" or use the clear storage function,if that does't work you will have to reflash possibly thru your sd card
Also try to connect to your PC in bootloader mode "Thats the three coloured screen you getwhen you press both the power and record keys while softresetting " you will have to uncheck the usb connection in your pc activesync settings first.
Best of luck.
bhawin said:
Go for artemis touch lite with cube which is an excellant rom. Even better than artemis touch vanills. I am using it since last 30-40 days without a single problem.
Click to expand...
Click to collapse
have u ever try the 'full with cube' one?
the full with cube and lite with cube, which one is better?
thx
Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
hard reset
Jeet8626 said:
Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
Click to expand...
Click to collapse
do hard reset
i had done hard reset also
Try to bootup without the SD card (and may be SIM), I had this problem with my Vox, the SD Card was corrupted. After formatting the SD Card, everythig became normal.
Best of Luck
Same problem
Jeet8626 said:
Dear Please help my PDA HTC p3400 has hanged at started up only at front screen only it is not moving further. i had done hard restet also then also not working. Please help me out .
Waitng for reply.
Click to expand...
Click to collapse
Hi!
i have the same problemwith my P3400
i have made the upgrade to wm5 to wm6.1
the pda at the first time has booted and i have configured the regional time and the pen alignment until the the screen that says Setup complete, click to proceed (or something like this).
After this, it gets stuck on the windows mobile 6.1 boot screen
i have made the re-update with the same rom update.
the problem persists!
I have made with/without sd card and sim.
Now when it boots apears
ONBL 1.07.0000
SPL 1010.olip
GSM 02.84.90
OS 1.17.0.0
then changes for the wm6.1 boot screen
and stucks here
S/n-SZ716FW06338
XT01
GENE 100 (old gene i think)
please help me
thanks in advance
Pedro Matos (from Portugal)
matosmatos said:
Hi!
i have the same problemwith my P3400
i have made the upgrade to wm5 to wm6.1
the pda at the first time has booted and i have configured the regional time and the pen alignment until the the screen that says congratulations, click to proceed (or something like this).
After this, it gets stuck on the windows mobile 6.1 boot screen
i have made the re-update with the same rom update.
the problem persists!
I have made with/without sd card and sim.
Now when it boots apears
ONBL 1.07.0000
SPL 1010.olip
GSM 02.84.90
OS 1.17.0.0
then changes for the wm6.1 boot screen
and stucks here
S/n-SZ716FW06338
XT01
GENE 100 (old gene i think)
please help me
thanks in advance
Pedro Matos
Click to expand...
Click to collapse
i have done it!
Now i have the wm6.1
i found another rom update! (coooollll!!!!)
heheehehehhe
thanks anyway!
i have the same proplem you had can you tell me how you done it with new rom espiecly i cant flash room and i cant do anything
thanks
for ur info @matosmatos
hi
as per the numbers quoted by u urs is a old gene so falsh roms for old gene only this is just for ur info
goodluck
matosmatos said:
i have done it!
Now i have the wm6.1
i found another rom update! (coooollll!!!!)
heheehehehhe
thanks anyway!
Click to expand...
Click to collapse
@smb_do
hi
assuming ur phone is just dead ie just blank screen do this
1.power off the phone remove batter and press the power button 3 secs
2.put batter back in to the phone
3.Press camera button and then power on at the same time u will get tricolor
used usb and Flash new ROM
or press camera button and do soft reset using stylus this will also give u the tricolor use USB and flash new ROM
goodluck
smb_do said:
i have the same proplem you had can you tell me how you done it with new rom espiecly i cant flash room and i cant do anything
thanks
Click to expand...
Click to collapse
thasnffffffffff
Im so so saaaad
I try avery thing hard reset , now roms every time it accept the now rom and whine it restsrts again tha same problem it stop at
ONPL 1.07.0000
SPL 1.07.oref
GSM 02.79.90
OS 1.9.1.1
please help me send me at
ahmedrefaat82/hotmaill.com
gene hanges at start up page onyl (after rom Upgade)
I am also facing the same problem. I have old Gene. I had upgaded it to
Pro User's ROM WM 6.1 Sumit
Everything was running fine till I soft reseted the device. On soft reset it stucks at the start up screen
On boot it shows following
ONBL 1.07.0000
SPL 1010.olip
GSM 02.79.90
OS 1.17.0.0
Then it shows the windows animations and then it hangs.
This has happned to me twice.
I had installed following applications after the ROM upgrade. Does any application creating a problem
1) HTC Home (6 tab plugin)
2) S2U2,S2P,S2V
3) Quick Menu
4) Opera Mini
5) TCPMP with many codecs
satishgosavi said:
I am also facing the same problem. I have old Gene. I had upgaded it to
Pro User's ROM WM 6.1 Sumit
Everything was running fine till I soft reseted the device. On soft reset it stucks at the start up screen
On boot it shows following
ONBL 1.07.0000
SPL 1010.olip
GSM 02.79.90
OS 1.17.0.0
Then it shows the windows animations and then it hangs.
This has happned to me twice.
I had installed following applications after the ROM upgrade. Does any application creating a problem
1) HTC Home (6 tab plugin)
2) S2U2,S2P,S2V
3) Quick Menu
4) Opera Mini
5) TCPMP with many codecs
Click to expand...
Click to collapse
Not likely, try a hard reset and see if your issue is solved
Addicted2xda said:
Not likely, try a hard reset and see if your issue is solved
Click to expand...
Click to collapse
I had tried that also but not able to recover I had to burn the ROM again .
I am scared now to soft reset my gene. Never know when it will get hanged again. (pls note that it does not hang on every soft reset).
I liked the new ROM (6.1 pro Sumeet) so much. It is fast and have left enough room to add/execute other applications. I have read so many good comments about the ROM. I do not want to change it to any other version.
Please.. please try to get some solution.
Thanks in advance.
regards
Satish
It Worked
Thanxxxxxxxx
Well First i was Using OLD Gene P3400
My Gene came with windows 5.1 in it
I have Upgraded to Windows 6.1 1 year Back
Now when i saw 6.5 i thought to use it Downloaded 6.5 ROM Summit's PRO Users WM 6.5 ROM
And i have Installed it as Mine was already SPL'ed for Olip
And after downloading i have directly Started RomUpdate Untility.exe
and My phone was fine 100 % completed and now Restarting
after Restarting i dont know why But it stuck at the Windows 6.5 Splash Screen from 1 hour then i though i should Upgrade the SPL and i have UPGRADED to Oleref some thing
and thus i Bricked MY GENE OLD
it aint working from then
it Wont even Start
SO i have Pressed HOLD Camara Button and Entered INTO Tri Screen Boot Loader
and tried with GENEIMG.NBH strong into CARD Not Helped
Tried mytty not worked
In middle when i try to update the ROMS i used to get INVALID UPDATE TOOL
tried for 3 hours nothing helping
So i search in Forum and found same problem of 3 ppl
there every one wrote the phone was messed up with some ONL some thing u need to give it to Service centre
for and 1 hour i though i should give it to Service Centre
Then Remembered That "HOW LAZY I AM And will i go to Service center and give the phone lol ? "
NOPE i wont im very lazy so i wont
still searched and TRIED HARD SPL V.1.0 olip
and Tried with my phone now its Back to SPl olip
Now what i did was same used Summit's PRO 6.5 WM and tried Sucess 100 % Completed and it was fine
but again same problem It stuck at SPlash screen for 15 mins +
so again entred into boot screen downloaded Original Shipped Asia OLD GENE WM 6.1 and Installed it
And tada it worked like a CHARM
and now MY GENE is BACK to NORMAL
Thanks to Search and thanks for reading all these **** this may be useful to some one
a quote from me "everything is around you try searching it "
So if have any problem feel free to PM Me
Forgot now im HAPPY
its 4 am now lol
Regards
Mr52
mr521427 said:
so again entred into boot screen downloaded Original Shipped Asia OLD GENE WM 6.1 and Installed it
And tada it worked like a CHARM
Regards
Mr52
Click to expand...
Click to collapse
hi can you post the link to original shipped asia OLD gene wm 6.1 ?
after upgrade to 6.5 screen showing windows mobile 6.5 only
I used SumitsProUsersROM_WM6.5_build21815_OldGene_Fixed to upgrade its struck at windows mobile 6.5 screen only nothing happening.
not able to flash again. Aslo want to note that while I was ugrading it shows me something like "sudden loss of power"
Pls help my phone is not working now.
thaks
please read the thread before downloading a ROM. Krazy's this ROM has this problem. try any other ROM for OLD GENE, it will work, if your spl version is .olip
problem with my p3400i
hello sir
i got a problem with my p3400i its shortcut are not working
and the notification error is
\windows\pmnotify.exe
what can i do now pls help me
plz help
plz help me getting out of this problum.i have htc p3400 old.i wrong hspl with orif hspl.then i performed mtty.exe process.now in bootloader [tricolour] screen it shows
spl 1.07. oref
now i dont khnow is it bricked.
or it is changed to new gene.
and what i have to do now.
i have nearly tried all roms .but at startup all show error 300.invalid update utilty.please any one who knows that what has happened to my set plz inform me.is it bricked or what happened to it.and now what i have to do.we have no service center in our country.i am from pakistan
Well Sunny Try Original Rom Now u should get from here please search
Install Original Rom first
Hello
I have a new Diamond2 that came with wm 6.5 installed.
Well, I prefer 6.1 over 6.5 so I flashed it with a 6.1 ROM.
The flashing went well but after the device is stuck in a start-up loop, it starts up and the "HTC Diamond 2" is seen on the screen, then it shuts down and starts up again, stuck in a endless loop. Only way to stop it is to remove the battery.
What to do????
woodsman said:
Hello
I have a new Diamond2 that came with wm 6.5 installed.
Well, I prefer 6.1 over 6.5 so I flashed it with a 6.1 ROM.
The flashing went well but after the device is stuck in a start-up loop, it starts up and the "HTC Diamond 2" is seen on the screen, then it shuts down and starts up again, stuck in a endless loop. Only way to stop it is to remove the battery.
What to do????
Click to expand...
Click to collapse
Were these official ROMs or are you HSPL'd?
Did you try a hard reset?
Yes, it´s a official ROM (1.39.413.1).
Yes, tried hard reset. Problem still there.
Getting desperate....
I'm having exactly the same problem like you do.
i bought it with WinMo 6.5 Pre-Installed and after downgrading
to the official 6.1 Rom ... The device is stuck at the same endless loop..
my only solution was to remove the battery ,hold the volume down button , re-insert the battery, this will take you to the boot screen you can just reconnect the USB cable and activate ActiveSync ( or Windows Mobile Center )
and Install the official 6.5 ROM again.... all went O.K. but still can't flash the 6.1 ROM,,, only the 6.5
Note: no Hardspl or anything
tornado89 said:
I'm having exactly the same problem like you do.
i bought it with WinMo 6.5 Pre-Installed and after downgrading
to the official 6.1 Rom ... The device is stuck at the same endless loop..
my only solution was to remove the battery ,hold the volume down button , re-insert the battery, this will take you to the boot screen you can just reconnect the USB cable and activate ActiveSync ( or Windows Mobile Center )
and Install the official 6.5 ROM again.... all went O.K. but still can't flash the 6.1 ROM,,, only the 6.5
Note: no Hardspl or anything
Click to expand...
Click to collapse
THANK YOU SO MUCH tornado89, you saved the day!!
It works again!
I don´t know vere you live friend, but if we ever come across each other I will for sure buy you a beer!
Thanks again!
woodsman said:
THANK YOU SO MUCH tornado89, you saved the day!!
It works again!
I don´t know vere you live friend, but if we ever come across each other I will for sure buy you a beer!
Thanks again!
Click to expand...
Click to collapse
HaHa
Free Beer, AWESOME
glad you sorted things out ,,,, +1
the real answer to ur problem was not having hardspl installed. you see, the chaps at HTC assume ull love 6.5 and will never need to go back to 6.1. therefore, they did not code for this situation, and when it does arise, u get stuck in the aptly named "loop".
had u installed Hardspl before installing any rom, then it would have worked flawlessly.
cheers
well my phone after i flashed and installed wm 6.5 it was working totally fine, but this morning i turned it off and then on and it totally freezes at the startup screen and never loads windows. what i can do?
i'll appreciate any comments
i have then same problem switches on displays, disigned for windows mobile 6.5.5 then freezes
Yeah many ppl has this issue... be sure to flash first the att stripped att stock rom then hard reset then boots then reflash the custom rom then hardreset then try again to use th rom maybe it works ok now
I have the same problem
but I have the same problem. I bought a second hand phone and also freezes on the welcome screen and to make the rom? I need it so I can re-flash the windows
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
miljan017 said:
I have problem with my tytn, i was traying 7-8 rom of win mobile 6.1 or 6.5 but no help, my htrc cant find nework or when he find network he was online 1 hour and after hat he he offline in phpne mode, what is a problem, radio, rom or... ????
Click to expand...
Click to collapse
try to upgrade radio version on your device !! you can find Radio Rom Wizard in http://forum.xda-developers.com/showthread.php?t=300713 or at http://forum.xda-developers.com/showthread.php?t=268031
i cant start update proces always error 260 or 262
Jasjam Freez on i-mate logo
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Batman1351 said:
Dear Friends
my jasjam stop on first screen(i-mate Logo) . I did soft and hard reset again and again but nothing!i remove battery and sim card along the night but nothing again.pls help me what's problem
Thnkas and goodluck
Click to expand...
Click to collapse
probably you need reflash again your device with Original Shipped ROM
JasJam Freez on Logo
Dear Rahman
sorry for my bad english.Thank u for ur reply.jasjam freez on the first page!it mean i can not connect it to PC via active sync because it no load to windows!PC can not detect device!so how can i fix this problem without a PC connection ?