Related
I followed instructions (http://forum.xda-developers.com/showthread.php?t=244549), and I executed 3.17.03_ENG.exe after xdaunlock.exe failed.
My device is now unusable, some error occured regarding usb connection and now all I have on pocket pc is upgrading bar with 0%.....cant reset cant do anything?!?
Please help!
If I understand corectly I need to put boot on my sd card.....
look here
this might help http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
thnx....and....where can I find rom image?
http://www.romkitchen.de/
no bootloader on wallaby
hello again ,,to jay05 thxs for replying back but u dont seem to understand what i am saying i will say it more clearly hopefully someone can help ,
ok there is no bootloader on the device its been erased when i do a hardreset nothing happens so can someone please tell me how to put back the bootloader on the device ,,its impossible via sd card and when i connect it via usb cable all i get in my device manager is a usb device as"HTC USB SYNC"
ok so there must be software that can somehow flash this pda as the computer recognises it as a htc usb sync ,,i done a search on google and found several software that runs on similar setups like the treo but none for wallaby so please someone there must be a way to upload the bootloader back to the device via usb cable pls someone help me out i also tried the xda developer tool pnewbootloader no use nothing happens
there must some kind of special HTC software that can flash the chips on the pda similar to the jtag technique but thru usb as again i repeat my comp sees the pda as a htc usb sync
i hope someone can help
many thanks and a happy new year
Hi
my artemis will go into bootloader but my pc doesnt recognize it as a removable disk, mitty recognized it though..
here;s what happens:
http://www.youtube.com/watch?v=vL4P_-6_Ofc
HELP
thnx in advance
Hi,
I know it is not a big problem, but. My neo wont charge just turn on red led for a sec, and then nothing. I can't connect via USB becouse battery is empty. When it is on a charger I can get bootloader mode and I can do a hard reset. Can somebody help me with flashing from a SD card? What to use ROM dump or *.nbf file from O2 update?
IPL 2.15.0001
SPL 2.15.0001
If you can enter bootloader whilst charging through USB, you can recover it by reflashing. Check the Wiki http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery for a how to.
i can not charge it through USB.
Can somebody please upload a dump rom from Xda neo, or if somebody have race edition will be much better.
Thank you,
Igor
Help. Need help urgently. I did CID ulock my device but I tried a new rom and now stuck in bootloader/ tricolour screen. U have tried everything from putting an original rom on the sd card and trying to boot that to trying to run mtty. Active sync doesn't recognise a usb connected device and neither does mtty. What can I do?
Jonathon
seabirch said:
Help. Need help urgently. I did CID ulock my device but I tried a new rom and now stuck in bootloader/ tricolour screen. U have tried everything from putting an original rom on the sd card and trying to boot that to trying to run mtty. Active sync doesn't recognise a usb connected device and neither does mtty. What can I do?
Jonathon
Click to expand...
Click to collapse
Hi Jonathan
you probably need this procedure called gold card http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard
Good luck
@seabirch,
You have PT
Hi everybody,i have some problem's with my cingular 8125.I have posted another thread,but no one answered,so i post a little different thread with different question.
My phone won't startup and when i enter to bootloader screen it don't connect's to pc.
It's started when i installed newest windows of CR96,i installed it,and next morning i found my device off and when i turn it on it don't even goes to main screen with ipl spl gsm and os info.It's just show's htc logo till it discharges.
I tried connecting it to pc,but when i enter to bootloader screen it don't connects,it even don't charge the phone when it's power off and connected to pc with usb.
PLEASE HELP ME fix this problem
tried turning it on in bootloader mode? and hard reset?
I just hard reset with tutorial i find on net.Well after hard reset it quickly showed me the ipl spl info on the same logo (it was really quickly),but now it's still the same/
Sometimes when i connect it to pc when ppc is off,the red light start blinking,is this should say something?
can somebody help me?