Hi
my artemis will go into bootloader but my pc doesnt recognize it as a removable disk, mitty recognized it though..
here;s what happens:
http://www.youtube.com/watch?v=vL4P_-6_Ofc
HELP
thnx in advance
Related
I followed instructions (http://forum.xda-developers.com/showthread.php?t=244549), and I executed 3.17.03_ENG.exe after xdaunlock.exe failed.
My device is now unusable, some error occured regarding usb connection and now all I have on pocket pc is upgrading bar with 0%.....cant reset cant do anything?!?
Please help!
If I understand corectly I need to put boot on my sd card.....
look here
this might help http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
thnx....and....where can I find rom image?
http://www.romkitchen.de/
no bootloader on wallaby
hello again ,,to jay05 thxs for replying back but u dont seem to understand what i am saying i will say it more clearly hopefully someone can help ,
ok there is no bootloader on the device its been erased when i do a hardreset nothing happens so can someone please tell me how to put back the bootloader on the device ,,its impossible via sd card and when i connect it via usb cable all i get in my device manager is a usb device as"HTC USB SYNC"
ok so there must be software that can somehow flash this pda as the computer recognises it as a htc usb sync ,,i done a search on google and found several software that runs on similar setups like the treo but none for wallaby so please someone there must be a way to upload the bootloader back to the device via usb cable pls someone help me out i also tried the xda developer tool pnewbootloader no use nothing happens
there must some kind of special HTC software that can flash the chips on the pda similar to the jtag technique but thru usb as again i repeat my comp sees the pda as a htc usb sync
i hope someone can help
many thanks and a happy new year
I cannot switch on my device. When I tried hard reset it stucks at bootloader. so tried to enter boot mode (red green blue screen) and reinstal rom. it starts and look it works properly but instalation of new room is not completed (error 270). have read simmilar topics in forums and it seems it´s because device is not connected with activesync. any ideas how to fix? please don´t say I have a brick
Cannot connect
Use the original cable supplied by HTC. There seems to be an issue with other cables.
sanjeev
Are your really using ActiveSync or Mobile Device Center?
In bootloader mode when connected via USB, can you read "USB" on the Bottom of the Display?
to both questions I can say yes. but nothing happens. it seem pc doesn´t recognize device.
ypsilonq said:
to both questions I can say yes. but nothing happens. it seem pc doesn´t recognize device.
Click to expand...
Click to collapse
Opens activesync at the PDA and the go to connections settings. (menu->connections).
See if USB connection is selected there.
Cheers
thank you. I tried what you suggest but no change :-(
is the error you got when flashing the original HTC ROM?
if not download it from the official HTC site and then flash it using SD card flash (for more info about see the wiki)
finally fixed!!!!!!!!!!!!
I find original rom (t-mobile) and followed instructions from link provided by y_bother. big thanks !!!
i really need help, i'm stuck on bootloader and i don't know how to re-flash because my computer won't recognize the usb?
my phone won't hard reset, someone please help!
my phone is an htc hermes, qtek 9600
Would be helpfull if you could tell us:
-Is there a hard SPL on the device.
-Which ROM are you using.
-what happend? Did a flash go wrong?
-Vista or XP?
As the-equinoxe says and the wiki and unbricking guide is easily found:
http://forum.xda-developers.com/showpost.php?p=1079011&postcount=1
Mike
Bo0mcxh402 said:
i really need help, i'm stuck on bootloader and i don't know how to re-flash because my computer won't recognize the usb?
my phone won't hard reset, someone please help!
my phone is an htc hermes, qtek 9600
Click to expand...
Click to collapse
Post #1160 http://forum.xda-developers.com/showthread.php?t=296722&page=116
Use the sd card method. My phone will not connect to active sync via USB, so i flash with the sd card. IMHO this method is safer and faster. Since you are stuck in bootloader, transfer files with a card reader from your pc, put the card back in the phone then soft reset. All should be good. Maybe once you re-flash you will get your active sync back.
the-equinoxe said:
Would be helpfull if you could tell us:
-Is there a hard SPL on the device.
-Which ROM are you using.
-what happend? Did a flash go wrong?
-Vista or XP?
Click to expand...
Click to collapse
theres no hard SPL
im using the old htc windows mobile 5 rom
yes, the usb cord got disconnected by accident
im using windows vista
Help. Need help urgently. I did CID ulock my device but I tried a new rom and now stuck in bootloader/ tricolour screen. U have tried everything from putting an original rom on the sd card and trying to boot that to trying to run mtty. Active sync doesn't recognise a usb connected device and neither does mtty. What can I do?
Jonathon
seabirch said:
Help. Need help urgently. I did CID ulock my device but I tried a new rom and now stuck in bootloader/ tricolour screen. U have tried everything from putting an original rom on the sd card and trying to boot that to trying to run mtty. Active sync doesn't recognise a usb connected device and neither does mtty. What can I do?
Jonathon
Click to expand...
Click to collapse
Hi Jonathan
you probably need this procedure called gold card http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard
Good luck
@seabirch,
You have PT
Hi!
I´ve got an bricked charmer, who dont want to go into the bootloader anymore (but the hardreset works). But what surprises me, is that if I connect the charmer with my pc, a device named Pocket Pc USB Sync appears.
is there any possibility to flash the charmer again?
LOL solved the problem xD
i just put in an empty sd card, and it instantly entered the bootloader mode ^^