Ok situation is this....he half died
dunno how but battery is normally charged to full it works.
when I turn it on "nothing" happens so I thought it is really dead bcs no picture no sound no nothing, but since I was curious I plugged it on ubs cable on my laptop and Activesync found it and synced....hmm...I went to explore his files and everything is there, I can normally operate with him..delete files, copy files...everything but still nothing on screen not even the light.Oh also when I plug him into his charger battery is charging (checked voltage on batt connectors) but there is no light when charging.
So correct me if I'm wrong but could it be that Flat Cable leading to LCD from keyboard broke? Since i think that keys on LCD part also don't respond.
Thanx for any advice you may have.
In case it is a Flat cable I'd also ask if someone is from Croatia here maybe and got a spare to contact me.thank you
Could also be that your brightness settings got turned down somehow, I have had this happen to me before, hold it under a bright light and see if you can make out what is on the screen, if you can, see if you can navigate through the options to get to the brightness settings, and turn them up
Tried just now...nothing there
can anyone help? did anyone have same situation?
Related
http://forum.xda-developers.com/viewtopic.php?t=8348&highlight=always+charging
I have a same problem before. But im update my device rom to 1.72.00 (Imate Rom) (Before my device have a 1.72.00 T-Mobile Rom) that problem is gone until my charge going %15. After that not blinkin Orange light is coming (thats normal for charge is about 10-15% but) also Setting > Power say charging and My XDA think its charging. Im not plug in my device anywhere (Cradle, Power Charge, USB Sync) but its always thing charging and charge is faster dropping to zero.
I dont understand anythig about that. After that i plug in my USB sync in my notebook and recharge it. After my battery full (100%) im unplug the sync cable from my device and nothing change. Its still say charging
After this i decided (i dont know why i think about that. please dont ask ) i plug in USB sync cable and plug out on my PC (Cable still plugged in on my XDA 2) and device gone normal. And unplug sync cable from my device. Orange light is gone and Settings > Power say Battery Mode.
Is there anythig wrong that. I think this is totaly software error bu i dont know.
Thank you for your advice.
My case was different. No matter what I did, the device ALWAYS thought it was in charging mode. I sent it to the repair centre twice and the device gone back to the problem again after a while. They said the connector pin has been in short circuit and so it thought it was charging. They also accused me of damaging it. I asked them why it would be so when I use it normally, the staff said 'Machine is like that, nobody can gurantee'. I was angry and sent several rude mails to O2. Upon some negotiation, they changed a completely brand new model to me and the problem did not happen anymore. I have used this new one for several months in exactly the same way I did with the old one and nothing untoward happen. That proved the old one was not damaged by me!
Sorry for being long-winded and yet could not solve your problem.
Anyone can help?
My device still have a that problem.
Im looking lights now and its some time say charging and some times not.
Please help
Thank you
always charging
i still have same problem :!:
anyone? help?
omg, this is exactly what my problem is. My XDAII always thinks that it is charging even though it is not plugged to the charger nor the usb sync cradle. And the amber LED light is steadily lighted like when you are charging, battery life of the XDA has dramatically gone down, it wont last me 3 hours or so and yet it is still on standby mode. I had reflashed it with the latest ROm available, 2.06WWE i think, and still after that, after the cold reboot, the problem was still there. Anyone has a better solution to that? Im planning on returning my unit for servicing if the problem cant be solved.
i have same problem , help me now
This will be less likely to happen when using usb cable rather than cradle. If you get a magifying glass you may be able to see the short on the pins and possibly nudge it back into position with a very thin sewing needle or similar.
up
i have exactly this problem too (
I´ve the same problem since yesterday with my T-Mobile MDA², it´s Rom Version: 1.72.01GER (6 months in use without problems), Rom Date 03/16/04, Radio 1.17.00, Protocol 1337.28, ExtRom 1.72.170
The yellow light is always on and the batterie runs very fast out of energy (1-2 hours) and it´s always says charging and think it´s connected to AC power...
any fix to this problem?
or what happen now to those who have this problem?
I have this problems too!!! How to fix it?
There's a major problem with my mda vario. Yesterday, I picked up my phone and it was extremely hot. when I tried chargin it, the the led stayed on red and then amber. after a while, the device itself turned on properly but just the screen doesnt come on. i can still tap the screen and hear sounds and use voice command to control everything but the screen remains off. does anyone know whats wrong with it? has anyone had this problem? i would really much appreciate if anyone could help fix this.
Sounds like a hardware problem to me - try a hard reset if you can see what you are doing or try and time it right. Ensure its not a battery problem - plug it into mains charger for a while to make sure its fully charged or if you can - borrow someone elses battery. But i think it may need to go back to your provider for repair.
2 days ago i had my cingular 8125 plugged into a charger . when i woke up it was off and dead, still plugged in?
now when i plug it in (to the stock charger) the red light comes on, but if i take the battery out, it stays on. if the battery is in, it is on. but i cant turn it on. ive left it for 15 hours now, and still nothing
even tried another battery.
when i first put the other battery in it turned on, was booting, but then died. probably cuz the battery was dead. but i had it plugged in as soon as i turned it on.
now the same thing happens.
any ideas?
i also thought i smelled something burnt. like if you have ever had a laptop that had a bad a/c connector and would heat up a bit, or even smoke!
dont know if it was my imagination or what?
thanks in advance
dan
T mobile MDA shows RED LED
that is strange that you post this today, because I just received T-mobile MDA unit from 3bay that has a similar problem.
-The phone does not turn on when I press the power button.
-It does not respond to a soft reset or a hard reset.
-With the battery in, I connect the AC charger to the phone and for about 1-3 seconds the charging LED color is RED. THe LED turns off and I can not get the same result if I reconnect the AC charger.
The only visible sign of life this MDA unit has is:
-with the battery out and the AC charger connected, when the USB is removed to the point where it is not connected to the MDA, the charging LED light flashes red for a split second and the screen flashes white for a split second as well. [I hope this is a sign that there's still life in this MDA, but i'm thinking my unit is truly a brick..]
From all the websites I've searched, this does not seem to be an issue, although for me it is a scary one! Anybody that can help would be much appreciated because I want a working MDA not a dead one
EDIT: It turns out my non-booting MDA was due to a faulty vibrator and flashlight MDA part. After removing these two pieces that are connected to the back cover of the MDA housing, the MDA booted up with no problem.
danrw84 said:
2 days ago i had my cingular 8125 plugged into a charger . when i woke up it was off and dead, still plugged in?
Click to expand...
Click to collapse
I'm in exactly the same position - left phone on charge overnight two days ago and in the morning it was completely dead. I have managed to get it to power on for about 2-3 seconds on one or two occasions but now it won't do a thing
Not sure if this will help, but have you tried to push that soft reset button that you have to to push with your stylus when it is plugged in?
Sounds stupid, but my power button is completely dead and I thats how I have to start mine up. I also have to pop out the SD card to get the screen to come out of sleep mode!
I might not work, but hey...worth a try.
Well, I eventually got back up and running. Turns out the battery was completely dead. I used the 9v battery trick and then used my USB charger to get the battery fully charged and all is well.
This leads me to query how do I now charge my phone when I don't have access to a PC? I was using a standard AC wall charger and the phone showed that it was charging but due to the fact that the display stays lit whilst on external power, this eventually killed the battery as the charge indicator appeared to be false.
*as posted verbatim in another thread*
WHAT IS THIS 9 VOLT TRICK YOU SPEAK OF?!?
funny...i'm having the same problem with 2, what were perfectly fine, wizards.
which is what brought me to this forum post.
These two devices were turned off and sat in my desk for months as they were not needed. They were perfectly good, successfully unlocked and upgraded from the advice/steps/tools provided here (thanks!). They were my primary personal and work devices until i was given the option to try a few iPAQs.
Now that I want to go back NEITHER device will boot. On the original chargers (both wall and usb) both devices will display the red light as shown in the pic above, will not boot normally, or via the 2 or 3 button methods common for these devices. The batteries do not get warm, which tells me that they are not getting current...which makes NO sense if i'm using 4 different stock charging options (2 wall and 2 usb) in different locations. One expect some variable would work to eliminate some oddity, but nothing is working.
something odd is going here. how can 2 perfectly good devices and charges suddenly crapout? I could really believe it's the battery, but one is grand spankin new (only used for a month)! Both have the main board die? Both not recognizable on any computer?
Is it possible that the backup battery is causing this? Can it me charged same as the standard if its drained? I know i'm grasping at straws here, but this odd a coincidence.
FOUND FIX
okay..this was too simple.
for some reason the USB will not provide enough"juice" to pop these out of their sleep.
I have been using this great little charging system made by good old Radio Shack that is a single plug with different adapters for all different devices...i've been using it for my iPAQ's, Blackjacks, BB's, ect. SO as a last resort i went and got the CORRECT adapter (as there are many mini usb adapters available) and SHAZAM!!! they boot right up!
don't ask me why the stock wall chargers will not work, but these RS iGo systems are the trick!
i'm going to link to the other similar issue in hopes any other folks having the same issue can benefit from this.
SITUATION
My Cingular 8500 does not power on. I have tried connecting it to wall charger as well as USB cable. The red or the orange light also does not come on. I tried all resets also but nothing worked.
BACKGROUND
a. My phone suddenly went off when I was opening the sliding keyboard. It had a decent (60%) charge at that time. After this it refuses to come on.
b. Only addition to the phone in the last 3 months has been a 2GB MicroSd Card. I inserted this card 4 days back and it was working fine.
c. The device is around 6 months old (but its unlocked, running WM6 and does not have any warranty)
d. I have been using the original wall charger to charge this phone regularly.
HELP REQUIRED
1. Is there a way to check if the problem is with the battery or with the phone? I do not have a spare battery.
2. Should any light come on if I connect the phone to charger without the battery inserted in it?
Thanks!
Try this:
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
i have the same situation going on ... except with mine the screen faded out...it came back on once...and faded out again and will not turn back on.. when i put it on the charger it was a red light.. and will not turn on or soft reset, or enter bootloader or hard reset. .. in addition i tried the method above and nothing has worked.... any other suggestions...my phone was working fine when this happened out of nowhere... i dont have insurance either i bought the phone from someone off of craigslist..help is greatly appreciated
I am having the exact same problem, I had about 30% charge, then it just shut off, and now will not come back on under its own power or via USB nor charger. I tried connecting the charger then inserting the battery, but I do not get any indicator lights at all.
I was running WM6, and the most recent thing installed was the pointUI home screen replacement app.
has anyone experienced this before?
theconcon said:
SITUATION
My Cingular 8500 does not power on. I have tried connecting it to wall charger as well as USB cable. The red or the orange light also does not come on. I tried all resets also but nothing worked.
BACKGROUND
a. My phone suddenly went off when I was opening the sliding keyboard. It had a decent (60%) charge at that time. After this it refuses to come on.
b. Only addition to the phone in the last 3 months has been a 2GB MicroSd Card. I inserted this card 4 days back and it was working fine.
c. The device is around 6 months old (but its unlocked, running WM6 and does not have any warranty)
d. I have been using the original wall charger to charge this phone regularly.
HELP REQUIRED
1. Is there a way to check if the problem is with the battery or with the phone? I do not have a spare battery.
2. Should any light come on if I connect the phone to charger without the battery inserted in it?
Thanks!
Click to expand...
Click to collapse
The Power LED should light up "red" other than that your wont get any juice. And read my second reply, try radioshack
Eamonn said:
I am having the exact same problem, I had about 30% charge, then it just shut off, and now will not come back on under its own power or via USB nor charger. I tried connecting the charger then inserting the battery, but I do not get any indicator lights at all.
I was running WM6, and the most recent thing installed was the pointUI home screen replacement app.
has anyone experienced this before?
Click to expand...
Click to collapse
It wont power on threw charger without a "good" battery plugged in.
Sounds like u might have a bad battery. Happend to a friend of mine "different phone" just go to a local Radioshack If they have your type of battery and have one in stock they will most likely let you try one on your phone. If not just go to ATT wireless store and see if they have one you can try and buy.
demo23019 said:
The Power LED should light up "red" other than that your wont get any juice. And read my second reply, try radioshack
Sounds like u might have a bad battery. Happend to a friend of mine "different phone" just go to a local Radioshack If they have your type of battery and have one in stock they will most likely let you try one on your phone.
It wont power on threw charger without a "good" battery plugged in.
Click to expand...
Click to collapse
I really hope thats the problem because it's an easy solution, otherwise I fear it might be toast. thanks for your advise
No light when connected to charger
Thanks all for your responses!
markafreeman said:
Try this:
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
Click to expand...
Click to collapse
Dear Markafreeman, I tried the entire routine above but no help.
demo23019 said:
The Power LED should light up "red" other than that your wont get any juice. And read my second reply, try radioshack
It wont power on threw charger without a "good" battery plugged in.
Sounds like u might have a bad battery. Happend to a friend of mine "different phone" just go to a local Radioshack If they have your type of battery and have one in stock they will most likely let you try one on your phone. If not just go to ATT wireless store and see if they have one you can try and buy.
Click to expand...
Click to collapse
Dear demo23019, I am not sure if I understand the above correctly. Should the Power LED light up "red" when battery is not inserted?
Once I connect the phone to charger (wall or USB), without the battery inserted in it, no red light comes on.
Does this mean that there is some problem with the phone hardware?
theconcon said:
Dear demo23019, I am not sure if I understand the above correctly. Should the Power LED light up "red" when battery is not inserted?
Once I connect the phone to charger (wall or USB), without the battery inserted in it, no red light comes on.
Does this mean that there is some problem with the phone hardware?
Click to expand...
Click to collapse
Yea the power LED should light up red with out a battery plugged in. Check the usb plug on the bottom of your phone, make sure the middle piece inside is still there and didnt break off.
demo23019 said:
Yea the power LED should light up red with out a battery plugged in. Check the usb plug on the bottom of your phone, make sure the middle piece inside is still there and didnt break off.
Click to expand...
Click to collapse
Oops. My phone's power LED does not light up when I connect it to the charger without the battery inserted in it.
I have checked the following :
a. usb plug is fine (I checked it by plugging it into the Y cable for the USB charger. The LED on the Y cable lights up when I connect the USB plug into it
b. The middle piece inside the socket at the bottom of the phone is still there and shows no signs of damage.
c. The wall charger is also working fine.
Does this conclude that the phone has a hardware fault and this is not linked to the battery being dead?
Similar Problems
I just had the same problem. I had it happen to my Att Tilt and then to my cingular 8525. You should check out this thread and maybe post your info there too, it would be nice to see everybody post in the same thread so we can figure out what's going on.
http://forum.xda-developers.com/showthread.php?p=1783005&posted=1#post1783005
yh
yh i got the same problem, i touched the power button so it wld go into standby, and it then refused to turn back on, even when i soft resetted it. Plugged it into the wall charger without the battery and there is no red power light coming on.
I've got a MDA Vario II and though im gettin a replacement, it kinda sucks as it seems im gna lose all my data
can we try to determine in more detail what people installed before they experienced this?
I just pulled it apart, and cleaned the inside to no avail, nothing seems to be awry, atleast not to my untrained eye, however it did get me thinking.
I listen to music on my tytn all the time, and over time the usb connector has become quite loose, frequently losing connections over activesync and music comes and goes from both lef and right. if the USB connector is shot, then when I plug it in it won't register that there is power, nor will it have the power to light up the red light indicating there is no battery. also, if the usb link is shot, then the phone wasn't charging so my battery is likely dead.
now to test this out I need to have a verified 100% charged battery.
I currently have the same problem. It will not charge via wall/usb. It flashes red once and that's it. Without the battery and plugged in, I get a solid red light. I tried plugging it into the wall charger without a battery and then putting my battery back in. The red light just turns off. That's it. I can get an active sync connection with a dim white screen, but I do not have enough juice to try flashing a new rom. If anyone has issues like these, are you also able to get an activesync connection?
TIA
EDIT: Is it possible to bypass the low battery protection when flashing a rom? My battery is somewhere around 40% so it would be safe.
Update:
Okay, I purchased a new oem battery and a battery charging dock. This way I can charge the battery without the phone before I attempt to flash a new rom.
I still would appreciate it if anyone who has seen these symptoms (white screen BUT with lots of vibrating / no charging / no bootloader) could give me a few pointers. I've exhausted the Wiki and so far it seems my only option to save the phone is to flash a new rom. Thanks in advance to anyone willing to give me some advice.
When turning on my trinity, I have the welcome screen "running" up and having a white stripe in the middle, well just look at the picture.
I just cant turn on my trinity.
If somone have idea how to fix this, please.
thanks in advance.
I'm having the exact same problem for weeks now!!
The first thing i tried was removing the sd card, and replacing the battery,
this seems to fix the problem for a small period of time (up to 1 day).
Don't be fooled, the problem will return when you need your phone the most
Reflashing the device with the same/different ROM has no effect!
Being an electronics engineer, i carefully checked all the connectors inside the screen, and everything is connected as it should be..
If anyone has any suggestions.... ?
Sjerby, one thing you can try to temporary revive your phone is this:
-Remove the back cover and take out the battery
-Plug in the charger, do NOT use the usb cable!!
-Put the battery back in, but don't try to power on the phone
-Leave the phone to charge for at least 20-30min
-Power it back on. You might have to push the power button twice for it to respond.
My findings are that the device somehow uses more power than the battery can
supply, but using a brand new fully charged original battery does not fix the problem!
ummm... the phone DOES work once in a while but it get stuck fast after, somtimes it just show's a black screen.
and i have no charger i use usb cable to charge it, i forgot the charger in a vecation ><
and just for the record the camera is having problems aswell if it makes to turn on