whats the reg entry for enabling evdo rev a?
You have to update the radio ROM. Go over to the Upgrading section and also check out the Wiki.
http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
Related
Just upgraded the firmware on my Cingular 8525. I downloaded the latest version from the ftp website.
rom version 2.06.502.3
rom date 02/02/07
radio version 1.34.00.10
protocol version 32.67.7020.10h
What the phone does. The phone still works and I can make out going phone calls, but I am unable to download my mail or bring up web pages. It comes up as web page can not be loaded. I've tried to search for an answer but have not found anything yet.
I am using an old att sim.
Thanks
Scott
Scott,
Have you checked to see if the connection settings are set on the device (settings - connections)? Perhaps the ROM upgrade (is a Cingular one or HTC?) does not contain those settings - in that case you will need to manually enter them. Perhaps this might help: http://forums.mobiledia.com/topic18250.html - not sure if the settings in here are right for your service or contract. A search here and on MoDaCo: http://www.modaco.com/HTC-Hermes-HermesMoDaCocom-f204.html might also provide the settings that you need
Good luck
My connection settings are correct. They were working before I upgrade the firmware. I am using Att settings which is proxy. Unless with the new firmware they changed. I think it might have to do with the bootloader being 1.09 I just trying to figure this out.
Thanks for your help,
Scott
So you are old ATT Blue in USA, correct?
Running the RUU 2.06 with Radio 1.34?
Do another hard reset as some times the first boot is not letting the entire Ext_rom complete, I do not know why but it happens sometimes on the new Cingular ROM.
After that if it doenst work then go to Cingular.com and check your GPRS setting in the "Connection" part of your setting and make sure the settings include the correct user name (wap.cingular.......... and password CINGULAR1..... etc)
Since I am using WM5 AKU3.3 (TMO HR origin) on my Wizard I do not see the active operator name in the dialer anymore.
The info is still available on the device as ie the wireless today plugin still shows the name.
In another thread someone stated that the WM5 AKU3.3 ROM do not show the operator name in the dialer by default.
My question is if there is a registry setting (ie in the RIL branch) or any other hack that can fix this.
Please note: I am NOT talking about a carrierlogo. I allready replaced the default (containing the T-Mobile logo) file with an empty transparent one.
The reason for wanting to have the operator name in the dialer is to check what network I am on because I use a dual sim. I have the info on my today screen (using the SIMToday plugin) but want to have it in the dialer also (just like with previous ROM versions).
The answer is a very simple: don't use T-Mobile ROM. All other ROMs, WM5 and WM6 have operator name in a dialer.
That is an option, but the WM5 AKU3.3 rom from TMO is the only official rom of that generation available. And i'd like to stick with it because of that.
I know previous ROM's (also TMO) do show the operator name, just this one doesnt.
If this is specific to this ROM, there should be a way to overcome the issue?
Meanwhile I found this: http://forum.xda-developers.com/showthread.php?t=324844
But the reg keys mentioned are not on my device.
a program can check if reg keys are present without auto creating them if they are not
in which cause only way to get the program to get the behaviour from the reg keys is to manualy create them
Rudegar, can you give me some hint on what you mean with your statement? You puzzled me . . . . .
I do know how to create reg keys and set values, but its strange that a whole set of keys simply isnt available . . .
New forum member needs some advice.
My device/radio is stuck on "E" Edge. I've tried every radio version from 1.43 to 1.51 without success. Maybe I'm missing something. Prior to flashing most of my device's settings, I had a good "3G" connection. I'm not sure what if any other components have a direct correlation on how the radio performs...ROM version, IPL, SPL, or if the device's CID has been unlocked. Any advise/help here would be terrific!
I did search the forum for someone with a similar issue and was unsuccessful. If I missed something, I do apologize in advance.
Here is my config:
AT&T 8525 | HERM100
ROM version: Schaps_WM6Pro_WWE_3.60a-0920_Full
Radio version: 1.50.00.00
Protocol version: 32.83.7020.20H
IPL -1.04 | SPL-2.30 Olipro (HardSPL v7)
search the forums for "pimp my black" and use the enable umts setting in that program...
OR...
ftp://xda:[email protected]/Hermes/Tools_and_Programs/SetHSDPA.zip
When I go - Windows>PreConfig, I see the following:
EXEC:\Windows\SetHSDPA.exe/Enable
Any other ideas? Somehow my Hermes lost it's ability to lock onto a "3G" or "H" connection.
strange... I have the same rom but I use 1.43 radio, no problems..try rolling back to 1.43 from 1.50
and duh, 8525 on att
OK...I finally figured out what was wrong.
Under Schap's 3.60a, I went - Comm Manager>Settings>Phone>Band, and changed "Select your network type." from "GSM" to "Auto". This allowed me to gain the connection I desired, and flash to just about any radio I wanted.
Great forum...still learning the lingo.
I have been using the FdcSoft Soft Key version 1.3 control panel applet for ages on my Wizard and have it as a OEM package (not much of one...) for including in ROMs. I noticed a newer version is available from the DotFred site - version 1.4. I downloaded this and included it in a ROM, however I noticed that it by default now appears in the Personal Settings page and not the System one as version 1.3 does. I used the drop-down box to change this and it prompts you to soft reset, which I did but it still appears on the Personal page.
I tried this a few times but it never changes so I took the registry key and value it creates
Code:
[HKEY_LOCAL_MACHINE\ControlPanel\Soft Key]
"Group"=dword:00000000
and set the Group value to dword:00000001 which should be the correct value and cooked it into a ROM and re-flashed. However it still appears on the Personal Settings page and the registry value reverts to dword:00000000. I then re-cooked with the older version 1.3 and all is well
I know it's not a big deal but I am used to seeing this applet on the System Settings page....
Am I doing something wrong?
Cheers
Andy
Hello xda-developers,
I have some strange experience with my Titan (Mogul) - I cannot configure SIP clients or WM SIP.
What I've tried:
1. I have installed SPL so I can successfully flash my phone with all ROM I've tried (PPCKitchen, dcd, nue).
2. Install dcd's cabs (http://dcd1182.n715dp.com/titan/): Radio 3.42.50, 4.1.2, Cricket carrier.
3. Install PPCKitchen with Cricket carrier and VoIP enabled.
4. Install latest nueROM (nueROM_MTitan-201-201-spackr.rar) with Radio 3.42.50.
On all these configurations I have not "Internet Calling" tab in Phone -> Menu -> Options. So I've tried several VoIP/SIP enabling solutions:
1. http://forum.xda-developers.com/showpost.php?p=2885113&postcount=2
2. This guide: http://forum.xda-developers.com/showthread.php?t=299950 (it creates the correct file in \Windows and SIP config reads the settings then).
and several others.
What I only have is unworking "Internet Calling" today item - it is selected but it does not display anything on today nor immediatelly after install, nor after reboot.
The "Internet" tab in Phone -> Menu -> Options is missing.
When I'm connected only to WiFi (with phone off), the dialer says "Phone off" and do not call (I expect it to call though VoIP in this case).
Maybe you have some ideas (I'm interested in standard SIP, not fring, etc)?
Thank you for your support!
Regards,
Alex
P.S. My current device info:
ROM: dcd 4.1.2
Radio: 3.42.50
Hardware version: 0003
Update 1: Not only the "Internet Calling" tab is missed, the "Network" tab is missed too. Enabling phone tabs (TTY, etc) in Advanced Config (http://forum.xda-developers.com/showthread.php?t=418151) does nothing.
Using VoIP phone service provider like PhonePower would help you save hundred to thousands of dollars on your monthly business phone or residential phone
________________
ip pbx
try this latest offering
i had success after 3 seconds configuration
PortSIP
http://forum.xda-developers.com/showthread.php?t=508715
i tried x-lite prior which failed for me
also i moved away from dcd 4.1.2 to ryanmoguls lite rom
significantly better...try it...you wont be dissapointed
alex_vn said:
Hello xda-developers,
I have some strange experience with my Titan (Mogul) - I cannot configure SIP clients or WM SIP.
...
P.S. My current device info:
ROM: dcd 4.1.2
Radio: 3.42.50
Hardware version: 0003
Click to expand...
Click to collapse
Hi Alex. I feel your pain, buddy.
I'm having the exact problem Alex is - Internet Calling doesn't show on my today screen. I've tried all the VoIP / setup cabs I can find. All of them give me an 'Internet Calling' Today item, but nothing shows up after checking the box. I've tried on a stock VZW WM6.1 and a custom bare WM6.5 (no OEMs).
This isn't rocket science, but I've spent HOURS fighting with this to no avail.
Here's my device:
ROM: custom (PPCKitchen Build 21501.5.0.70)
Radio: 3.37.75
HW Ver: 0003
Are there any Titan ROMs in which VoIP works out of the box? Those who have it working, which hardware version do you have?
I think I may have a fix:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"Features"=(+8) i.e. add 8 to whatever value is there.
That got my Internet Calling to show up - haven't had time to test operation yet.