Problem with my htc 3300.
I try to boot but is freezes . I di hard reset it starts showing th first screen then freeze.
Can you help me
make hard reset. if is not working, install a clean wm6 version, official one. And don't forget about CID Unlock
Athanti said:
Problem with my htc 3300.
I try to boot but is freezes . I di hard reset it starts showing th first screen then freeze.
Can you help me
Click to expand...
Click to collapse
Do a hard reset yes. I had the same problem once and this helped me.
Hard reset= hold both selection button next to green and red button.
Keep them push down and switch on your Artemis. Afterwards you will get a question. To proceed is pushing the green key.
Your Artemis will be restarted again with all basic (use lost all your contacts but you still be able to activesync them back if you did make a backup)
**good luck**
Hard reset= hold both Left&Right button + Reset button (lower left)
An rainbow screen will appear (PDA must be connected on USB)
After, you can flash a ROM again...
Hello,
i tried to update my BA with wm6.
after flashing it stuck in bootloader(blue,green,red,white display) with the line "R 1.10.00" and nothing more...
even hard or softreset do nothing.
what can i do?
ok i even try the Stuck at startup method.
that's the output of Multiport TTY Version:
set 14 0
HTCST ÚÈÒHTCEUSB>task 28
DOC_format_HW+
DOCInfoTableinitHW+
Binary0:dwSize=80000
BINFS0:dwSize=0
FAT0:dwSize=1000000
FAT1:dwSize=2BA0000
All:dwSize=3C20000
USB>task 0
it always stuck in blue,green,red,white screen after run multiport tool. what can i do?
------------
i have this problem because of this flashing method:
i entered the grey screen (with serial/usb in first line). then i put my usb connection on and run the rom_update. after it is finished (succesfully) it stuck in the blue, green, red, yello screen! help please...
how did you hard reset?
hello,
i hold down the power-button and at same time put stylis in reset.
hard reset for both WM5 and WM6 is different from the one you're doing. here's the guide...
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_WM5_For_Beginners
good luck!
ok thanks, i have tried this:
i do softreset. whenn the stripes came i push "records and "camera"(media player button because there is no camera)---> nothing happens. it stops with the line R 1.10.00 and the coloured stripes.
i dont knwo what to do.
the bootloader method is running. i hold power and record button while i softreset. but with color screen it wont work.
they is no camera button (it is media-player button) because there is no camera. its an german xda III (blue angel).
the next problem is i dont knwo what os is right now on it. befor flashing it was wm2003 and flashing says it was successfully. i dont know if its wm6 or wm2003!
ok now all is happen...
the xda says nothing. it dont go on, it dont work anymore. no lights when in cradle, nothing.
can i do anything?
1. Take the battery out, wait a moment, put it back, do not turn on. Put in the cradle and try to charge it. Use power connection (from power supply), disconnect USB from the computer for charging. Amber led should turn on.
2. When it will be fully charged (amber LED will turn off) try to turn it on and enter bootloader. Try to downgrade to WM2003. If it works fine, try again to flash WM5 or WM6.
What you did seems to be wrong update (wrong rom, wrong file, not fully flashed). But you still have bootloader, so it should be possbile to flash it. But you need full battery.
jakubd said:
What you did seems to be wrong update (wrong rom, wrong file, not fully flashed). But you still have bootloader, so it should be possbile to flash it. But you need full battery.
Click to expand...
Click to collapse
it was not unlocked befor i flashed with bootloader-method.
i charged the battery in cradle (withoud the blue-angel). the led first went orange, after a while turned green (fully loaded). put it back in BA an nothing happens. then put BA (with battery) in cradle and the led became red.
no action on devide, no feedback, nothing. it wont turn on but led is still working.!?
jakubd said:
2. When it will be fully charged (amber LED will turn off) try to turn it on and enter bootloader. Try to downgrade to WM2003. If it works fine, try again to flash WM5 or WM6.
Click to expand...
Click to collapse
ok i get it. in display is the "USB" & "v2.07". now i can flash. but my problem is the phone is not unlocked yet. what file can i flash now??
This message tells you are in bootloader mode. Now you can perform normal flash - I would propose you to use tested&working rom (WM2003?). If this works fine, try again to upgrade to WM5/WM6.
BTW: if you disconnect USB (take out BA from cradle) it should show Serial instead of USB.
ok big tanks to the forum. i finally get it. wm6 german on blue-angel!
Same thing here... but worst..
My 9090 is stuck at bootlader...
When i try to update, (i press the power, record and reset), it says:
SERIAL (or USB)
DOC VERSION IS ERROR!
v2.08
Any idea???
that's normal...
try to flash/update your BA in that screen.
the easy way to go into bootloader mode is to execute a file called Enter Bootloader.exe ..it comes with the rom u download..( well it came with xplodes )
Note:- you have to execute this file directly on your deive not on your desktop PC...and i have only tested this on WM 2003..maybe it will work with wm6 also
SilverSamurai said:
that's normal...
try to flash/update your BA in that screen.
Click to expand...
Click to collapse
I there...
I just updated to BA_TMNL_14200_119_11300_Ship, but only with Maupgrade, couldnt do it with baupgrade...
The problem is that i cant put extended rom, whem i try to upgrade is allways an error... and in the settings i dont have extended rom instaled...
Besides that the batery only last 1hour and the PDA is always freezing... i'm always doing resets...
any idea??
Sorry for my bad english by the way...
Hi,
I've tried ROM (RUU_Sedna_HTC_WWE_1[1].02.405.1_Radio_Sedna_1.58.13.28_signed_Test) and my P6500 it's out. Some know how to put it in a bootloader mode.
I have HardSPL from Oligopro. Rom charge Ok but when % is finished the screen turns white and don't function.
Press the power and OK key and softreset at the same time .
dont forget too pull the usb cable out or else it wil not work
®
My HTC do not swich on. Today my battery dischargerd, when I pluged in power it did not swich on. It shows only red green blue white stripes. help!!!
Im sorry for may bad english
When I conect to my PC if finds some device and on HTC on white stripe is written USB
It's your SPL screen. Try this:
push the internet and message buttons together and reset your phone. It asks for reset, press the green phonekey. This hard-resets your device.
It does not help
Did you flash any ROM yesterday night ???
No
Only my HTC batterry full discharged.
Very strange, i don't know if is the case to use Mtty, wait for others opinions.
NeoS2007 said:
It's your SPL screen. Try this:
push the internet and message buttons together and reset your phone. It asks for reset, press the green phonekey. This hard-resets your device.
Click to expand...
Click to collapse
Neo's syggestion is correct maybe you did i wrong? if you do it correctly you will have a message saying
this operation will elete all of your personal data and reset all settings ro manufacturer default. press send to restore manufacturer default, or press other keys to cancel
the press green phone icon
if that fails download and flash the correct ROM for your phone i.e mine is avalible from o2 in english
Hello.
One xperia entered tricolor screen (volume down + powering on) but now it cannot leave that screen, even if the battery is taken out for a minute.
Is there a way to kick the xperia out of bootloader mode?
Thanks.
when you take the battery cover out you should see a hole, insert the stylus in it and "push".
enjoy.
Thanks a lot.
I hope you don't mind, but since these devices are not the cheapest phones out there and you have 3 posts and just joined... I'll wait for some one else to confirm.
Thanks a lot anyway!
Any one can confirm?
I do mind and I hope it breaks on you and becomes nonusable ever again
celinelust said:
I do mind and I hope it breaks on you and becomes nonusable ever again
Click to expand...
Click to collapse
Not nice...
That action is to soft reset only not to enter bootloader (normally u need more then a few key combi to enter just like manual hard reset)
Hello.
Any one that can help?
I tried the 'reset' button but of course that didn't help.
I tried hard reset and it showed it was hard reseting, but after than the same tricolor screen appears.
It says in this order:
RUUNBH (aligned right)
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707 (these last 4, aligned left)
Upgrade ROM Code Error (centered)
Please try again (centered)
Serial (centered)
I tried also RUU with hardspl, and RUU with ruu_signed.nbh (supposedly UK official rom).
In both cases it goes to withe screen with the progress bar at 0% but stays there until you take off batery, then it returns to previosly mentioned tri-color screen.
HELP please!