i changed my charmer's rom with a wrong one,and now my mda is dead...the pc cand recognize it to change the rom...the only solution is the flash from the sd card...please someone help me i am disperate...how can i do this?
Can you enter bootoader mode at all?
Related
i have Qtek 1010 i did upgrade from PPC 2000 to 2003 in the middle of the upgrade 82% it get stuck .. now my qtek is not working ..
i have SD card .. but i dont have a backup for my previuos OS ..
any help will be appreciated..
reagrds to all
QUsai
How were you doing the upgrade, PC install or the SD card boot loader
method? If was the PC install trying using the SD card boot loader method.
For more info. on the SD card boot loader method just do a search on the subject in this forum.
HTH
I was reflashinmg my Wallaby and the process stopped with and error, noew I have only the bootloader runnin, then the only way to restore Windows is to have an SD image, and I have no one, or use the USB FLASH OPTION .
Could someone explain me how to flash Win back to the Wallaby by the USB FLSH OPTION ?
Thank You
You can download an image from lumpis kitchen, just check the box at the bottom of screen that says sd card flashing, then you can use xdatools and a card reader writer to program the card to make it flash your phone when you enter bootloader mode. I know nothing about usb flash, sorry.
http://lumpistefan.dyndns.org/
Good idea, I will try to get a card driver, thank you !
Anyway and meanwhile, if someone knows how to flash through the USB bootloader, the assistance will be welcome.
USB FLASH MODE
I also need to know how to made an USB FLASH MODE upgrade. My SDslot in MDA seems to be broken.
Any help....?? Pleaase....
Sorry if this is a stupid question,
is it possible to boot off a MicroSD card (like the POLAIMG.nbh method), in order to Hard-SPL ?
thanks.
To solve such problem?
http://forum.xda-developers.com/showthread.php?t=384150
I wonder if it would be possible to install the HardSPL directly
from Bootloader instead of an ActiveSync connection
Olioaglio
Thanks for the reply, i dont have a bricked device so no problem really.
I'm just keen to be able to flash my cooked ROM onto a brand new device without my PC. i.e. just 1 or 2 MicroSD cards.
I know i can use bootloader mode to flash a rom using the filename POLAIMG.nbh, but that is assuming the device is already HardSPL'd.
So i was wondering if anyone has a POLAIMG.nbh file which can be used in bootloader mode to remove SPL ? without Activesync.
thanks.
Gus
Hi,
I'm kind of new around here.
My problem is as follows:
- TyTN running PaysRom for about 9 months
- Started to get very sluggish
- Unable to get signal
When i booted my HTC the 'R' and 'G' that appear on screen and used to have values in front of it now display 'none'.
So, I connected it to my PC, 'activesynced' it and tryed to install a new ROM, hoping it would solve the problem.
But the new ROM wasn't installed sucessfully and now all I got is a brick.
I can't even connect it to ActiveSync since it's not recognized.
Is there any solution to my problem?
TIA,
hype
Can you get to the Bootloader?
Yes..
By pressing the Ok+Power+Reset on the bottom button, I see the 'RGB'+white thingie, that I believe is the bootloader..
What SPL do you have? Is it Hard SPL V7(2.10)?
If it is, use the sd card method to install a new ROM.
remember to backup your card 1st.
1. Format 2Gb or less sd card FAT32. Copy .nbh file of the ROM you want onto it and rename to hermimg.nbh .
2. Insert card into Hermes and reset into bootloader.
3. If all things have been done right, follow the prompts....
If the radio ROM has died, I'd suggest trying to flash the Shipped Stock ROM 1st and see if that actually fixes the problem with the blank values on R & G. WM06 upgrade of shipped carrier ROM should also work.
Cheers...
Tks for your response.
I tryed the SD Card method already, with no sucess.
The red stripe shows as follows:
Code:
HERM200
IPL-1.04
HERM200
SPL-2.03
Everytime I tryed on another ROM I always perfomed it using SafeSPL.
Since I don't have 2.1, what can I do?
Tks for all ur help.
What happens when you try and flash a ROM over?
Do you get any kind of error?
You need to find the SHIPPED STOCK ROM. WM06 upgrade should be OK as the CID should match.
Put Hermes into bootloader and connect to PC after unticking "Allow USB Connections" in Activesyncs settings on the PC.
Run the RUU_Wrapper.exe file of the SHIPPED STOCK ROM. ven though activesync won't etect it, the flash file should. Follow the prompts.
Good luck as this seems to be the only way to fix this.
Good Luck...
You might be able to flash a Stock WM5 ROM using the SD Card method. Worked for me when I had SPL 2.03. In fact that's the only ROM it would let me flash over when mine bricked.
hello all
i need a solution ar informatins or any other tricks for uploading rom frmo sd because the usb not connect anyway the device freez at the 2nd boot screen . and i can enter bootloader normaly i dont know whre is the problem of usb
thanks