I have just used the Athena Unlocker and since then my device does not want to boot up. It shows me the radio version and all other informations at start up but it does not boot up properly. I am able to put it into bootloader mode. I have already reseted it and also a hard reset but neither helped.
Any ideas what to do?
do you try to reflash it?
I did but the problem is that all the roms i have downloaded ask me to connect the unit using active sync which i cant. I need a flash which works from the bootloader mode.
i do reflashed rom within the bootloader mode
i will download and try some other tom. The ap one does not work for me in bootloader mode
Related
where do i get the XDA manipulator
http://wiki.xda-developers.com/index.php?pagename=XDAmanipulator
Thank you very much LumpiStefan for your timely response and for the link to get the XDA manipulator, i have been looking for it for so long. THANKS DEVELOPERS
I too appreciate the link, I have been searching for this for ages. Cheers.
.......Ib a n e
I really appreciate the link thanks
BR
wallaby usb flashing
hi there ,,can anyone tell why when i enter usb flash mode i cant flash via it wheni try to run a upgrade program it says plug in yor pda and on the pda screen all i get is usb flash mode,,connect usb cable now... but it is lso in my device manager i see my pda as a windows ce devices so what the hell is going on ?
pls dont tell me only way is via sd card surely it can be done via usb lead if so please can some post a step by step on how to flash via usb as i did so already from pc2002 to win2003 using the rom from xda developers and now i get a logo Ozup and underneath says ,,this os image is meant for microsoft employees or technicians bla bla bla
but i can enter boot loader fine access all the menus in bootloder my bootloder version is v5.15
pleaaaase someone help me
There are two possibilities to flash a device:
1. In Bootloader via SD Card
2. Normal booted device via Active Sync
But i do not know what you mean with USB Flash Mode
Stefan
thanks for replying back now i have new problem
i have a big problem and i think your the only person who can help me my problems occured when i went to flash my wallaby device with this rom ftp://xda:[email protected]_ENG.exe/
i wish i never bothered the device was perfectly running fine until i flashed it with this via usb it all was a succes when i done a hard reset i got a screen with a oz up logo and underneath it says "microsoft internal use only" this operating system image is meant for use only by microsoft employees and contractors ,,and the crazy thing is i cannot enter my bootloader which was v5.15 so i can flash it via sd card its vanished no bootloader only that screen and on the bottom right corner it says ,,g32s54,v4.08,3.04 when i plug it in usb all i get is a unknown device and i cannot flash it so please if there is a way even if its pretty technical i would be honoured if you can help me out i would be very grateful if u cn show me a way of getting the bootloader back many thanks
still no bootloader on my wallaby device
hi i,m really upset if i can only get acces to the bootloader i can atleast flash it via sd card so please if theres a way of getting back the bootloader or somehow flashing it back please any help would be appreciated
radio stack
had same sort of problem this is how i fixed it go here
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
don't use the 4.16 use the rs 4.21 when i did the upgrade i was then able to connect to active sync then changed the rom try the special rom 1.2
hope this helps
mate the problem i have is that i cant acces the bootloader for me to do anything its gone and this happened after using that dodgy rom
all i want to no is there a way of putting back the bootloader on to the device as its not there its been somehow erased after the flash i done
mate if you try what i said to try this should help you to connect your phone back to your pc then you can change the rom from there you shold get bootloader back when you put a new rom on
I flashed my device a month or so ago been working great but last night went to make a call and I was in bootloader screen did a couple of soft resets and it booted normaly. This morning stuck again and both hard reset and soft will not work. I have not loaded anything new in quite sometime.
My boot loader screen displays the following:
HERM100
IPL-1.04
HERM100
SPL-2.10.OLIPRO
When connected to my pc it does display USB
Any assistance will be appreciated
Thanks
fitz
A couple of options:
1. Using mtty, execute a Task 28
or
2. try installing your preferred ROM...
what is mtty task 28?
and i am assumeing i will need to flash the rom from my micro sd because windows will not communicate with my device
The wiki will explain mtty for you.
Regarding flashing, you should be able to use a regular flash. ActiveSync won't communicate with the phone in BL mode but usually the RUU program for flashing will.
It happended when during copying rom from Pc to PDA and error at 3% everytime. What should I do
spl was unlocked (spl 1.11.0000)
Get the device into bootloader and flash the stock rom.
I had alomoust the same problem but i don`t know how i can get the device to bootloader mode to flash it. please help me
still can not correct the problems, any one can help me?
i try to flash original rom but it has the same error.
vladilol said:
I had alomoust the same problem but i don`t know how i can get the device to bootloader mode to flash it. please help me
Click to expand...
Click to collapse
First turn your PDA off.
Then keep the memo/voicerecorder button pressed while you turn on your PDA. It will automaticly go into bootloader mode. You can release the button then.
Please be advised that when you are using Windows Vista you will need different drivers then Microsoft offers you. You can find it further in this forum, aswell on this site:
http://http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
Don't forget to run USPL before flashing your rom.
btw, please disable hibernate and screensaver. When enabled it can fail your update.
Hope this will work. It did for me.
My friend asked me to try recovering his T-mobile DE Hero, it was bricked while my friend was trying to root it
I tried to flash official rom, but RUU gets error 170...
This what appears on screen when device is on:
error 170... thats the usb connection error right?
this could be because the drivers are not installed properly.
read this thread, then try again
http://forum.xda-developers.com/showthread.php?t=647353
Although error 170 is indeed USB error, (with windows 7 normally) the nasty looking Icon at the bottom of the screen does not look good, never seen that before
Let us know how you get on please
I had the same error with mine.
I ended up in installing a custom ROM, since NOTHING would work. No drivers no nothing. It just refused to read the phone.
I installed VillainROM 12, it has OS 2.1 so it's working perfectly
I had the same problem, but I was trying to flash my German G2 using an HTC Official RUU. I've been able to flash the recovery rom using fastboot and then boot it, but that's where my progress has ended. I'm about to flash VillainROM12.0.0-Full and see what happens. I'll let you know.
EDIT: VillainROM12 installed via AmonRa Recovery menu, but rebooting takes me right back to the RUU screen with an Xed-out EPROM
Nothing helped
I tried everything You said, but device is showing same screen, I also tried using SD card method but when I turn Hero on (while holding Vol-) same screen appears
Does anyone have any other idea what to do?
Its looking like a problem with a radio (drivers etc). Try to update it through recovery if u can enter there.
You can see in my first post the only screen where I can enter...
Well.. This icon with a "chip" probably say a SPL or Radio of phone is just f***ed up.. :/ You can enter to fastboot so drivers of graphics and other modules are in good condition..
wheeeler i think u should find a .zip with a official SPL and radio and update it through recovery like u did it with Villain ROM
I got some idea but I think u tried it before.
iwanrakic U can connect to phone via SDK?
Try this command. It should update it.
C:\sdk\tools>fastboot flash radio radio.img
Of course u need image of official radio.
What driver does Windows report installed when you plug it into your PC in that mode?
I need help guys. I tried to flash the bootloader and something went wrong. Now it starts up with the three color and have this displayed.
RUUNBH
PANT200
SPL-0.36.0000
CPLD-2
Upgrade ROM code error
Please try again
Serial
It can still detect the USB connection, however it will always timeout. Can anyone help me out with this? I am new to this; So if you can be as detailed as possible it will be great. Thanks in advance.
Update:
So far i've tried loading rom from sdhc card formatted FAT32. With Matbee's version and also Cfays wm6.1. Both however are stuck at Loading after bootloader.
I've tried connecting it to windows but since it won't sync, I can't do anything there. At this point, anything I can do or try is worthwhile.
Thanks.
q+a
id try re flashing to unlock it
prolly by loading it in bootloader mode
if it wont connect during flashing disconnect the usb and reconnect once it starts
lemme kno what u try