Database Users

Titan flash fail. Need recover instructions

Hi, had a problem flashing my bro in law's Titan.
I unlocked the titan with the titan unlocker by Olipro and flashed with the round 4 reloaded (loaded) rom (dcd 3.2.6)
unlocked fine, installed the rom to 100% rebooted phone and its stuck on the Bell screen. (its after the HTC screen and after the screen that shows versions, which it does show D. version 3.2.6) any ideas how to get it to where i can flash it again?

Does it have a compatible v3.x radio installed as well? I recommend 3.42.40 personally, but just about any v3.x radio will work.
BTC
Tzetsin said:
Hi, had a problem flashing my bro in law's Titan.
I unlocked the titan with the titan unlocker by Olipro and flashed with the round 4 reloaded (loaded) rom (dcd 3.2.6)
unlocked fine, installed the rom to 100% rebooted phone and its stuck on the Bell screen. (its after the HTC screen and after the screen that shows versions, which it does show D. version 3.2.6) any ideas how to get it to where i can flash it again?
Click to expand...
Click to collapse

Ok, solved the problem by pressing the power button, camera button and reset button all at the same time. This of course enabled the bootloader on the phone. installed another rom which gave me the same result, stuck at carrier screen. This is of course because i didnt know i had to upgrade the radio first. Got the phone running again by updating the rom with the one at the HTC website for my carrier.
Now i'm trying to update the radio. there isnt alot of instruction out there, but i did find this http://wiki.xda-developers.com/index.php?pagename=Radio only upgrade instructions Although after following the instructions, the universal rom upgrade tool never connects to my phone. I tried the vista fix here http://forum.xda-developers.com/showthread.php?t=313001 But being that its over 2 years old, i'm guessing its now useless as when i try to update with the files there my OS says my drivers are more current and wont allow me to install them.
So now i'm stuck at the "how to upgrade my titan's radio" stage. Anyone have better instructions? (or can tell me what i'm doing wrong?
what i've done
downloaded radio version 3.42.40 as BTC suggested
downloaded "universalRUU" and extracted it to its own folder
copied the radio's file "TITAIMG.nbh" into the UniversalRUU folder
reset my phone into the bootloader screen
ran the ROMUpgradeUt.exe from the UniversalRUU folder
pressed "next"
it says "checking information on your device" and hangs there forever.
if i press update anyway, it continues to the last screen where i can press "finish" and thats it. nothing happens. which part am i missing? the phone is DEFINATLY connected to windows at that point, so it should be able to detect it, but it doesnt seem like it even tries as there is no system pausing or stuttering like it might be trying to do something.
thanks for the help so far.

Solved the problem on my own, as well as the other couple problems i ran into.
Updated the Titan WIKI to reflect my solutions and clarify some key points.

USB Problem

Hi,
if i connect my HTC Touch HD with my computer, it's just charging, nothing more. If i go to Bootloader, there is just written Serial even if its connected.
I am using Dutty ROM since some weeks and didn't had any problems till a few days ago, the strange thing is, that i didn't change anything.
I tried it on my laptop and on my computer the one with windows vista the other one with win xp, it worked on both, but not anymoe.
i also have a problem with the camera, if i press it nothing happens it just stays in the menu. Some days ago i got a error failed to initialize camera, but no more error anymore.
In my opinion my hardware is broken somehow, i hope someone in here can tell me sth different and a solution.
And if my hardware is broken, how can flash my original rom back without an usb connection, because the warenty will be gone with a custom rom i think.
I hope someone can help me.

Kryston said:
Hi,
if i connect my HTC Touch HD with my computer, it's just charging, nothing more. If i go to Bootloader, there is just written Serial even if its connected.
I am using Dutty ROM since some weeks and didn't had any problems till a few days ago, the strange thing is, that i didn't change anything.
I tried it on my laptop and on my computer the one with windows vista the other one with win xp, it worked on both, but not anymoe.
i also have a problem with the camera, if i press it nothing happens it just stays in the menu. Some days ago i got a error failed to initialize camera, but no more error anymore.
In my opinion my hardware is broken somehow, i hope someone in here can tell me sth different and a solution.
And if my hardware is broken, how can flash my original rom back without an usb connection, because the warenty will be gone with a custom rom i think.
I hope someone can help me.
Click to expand...
Click to collapse
A hard reset will quickly tell you if it's hardware or software and you don't need usb for that. There is also an option which dictates what the phone does when connected via usb, so you might want to check that option first.

need to read & search a little more
last paragraph of this post outlines how to return to stock rom
http://forum.xda-developers.com/showpost.php?p=2710548&postcount=1

i did hardreset, but still same problem
what i also noticed, is that sometimes my display don't work, i have sound and vibrate feedback, but i see just a black display, softreset etc doesen't work somehow i have to take of the battery.
i noticed also that the usb cable is a bit broken, but it still charges the phone.
but i already saw that normal usb cable should work too, so i tried it but no change.
i guess i will try to get the stock rom again now and see what happens

well like i thought, i can't get the stock rom, because i dont have a usb connection
any more suggestions?

Kryston said:
well like i thought, i can't get the stock rom, because i dont have a usb connection
any more suggestions?
Click to expand...
Click to collapse
There is 2 methods to flashing roms. Have you tried SD card method?
1. Download ROM image you would like to use, normally named RUU_Signed.nbh, and rename it to "BLACIMG.nbh"
2. Copy BLACIMG.NBH into the root dir of your Storage Card.
3. Be sure to have at least 30% of charge.
4. Turn off your device by using the Power Button
5. Go to bootloader mode. Push and hold Vol Down + press Power button.
6. As soon as presented the message, push Power button to start flashing or Volume Down button to cancel.
7. The whole procedure will take about 3 minutes. After you finish and see the relative message, soft reset your device, you are ready.

thanks god i didn't bring the phone to shop yet xD
thank u, i will check this method i will post here if it works later

well now i have another problem
there is written upgrade rom code error please try again on bootloader, i cant turn it on anymore it gets stuck on the loading screen of the flashing progress

Kryston said:
well now i have another problem
there is written upgrade rom code error please try again on bootloader, i cant turn it on anymore it gets stuck on the loading screen of the flashing progress
Click to expand...
Click to collapse
I had this exact same problem a while back after a bad flash. What you need to do is flash carriers orginal stock rom onto device. This will be the only rom which will work. Go to wiki section on stock roms here and download your original rom and flash it. Don't worry if bottom of bootloader is blank or doesn't say 'usb', original rom will flash anyhow.
More info read this thread

i am downloading right now, hopefully it will work, i will write more infos later
thank u for your help, without you, i would be lost...

i am stuck, i get error 206 connection
i downloaded stock rom to my pc
and i'm a bit confused, my pc noticed that i pluged in the phone, my device manager showed my phone, this worked only one time, now nothing...
EDIT: in bootloader mode, serial staus doesnt switch to usb or blank, updateing usb driver doesn't work without usb connection to device, at least i didnt found sth here
i will try it on my other computer now, but i doubt it will work
EDIT2: got usb connection for some seconds, problem is my hardware of device its broken somehow, if i press on th eback of the device i am able to get usb connection, now it failed, i will give it some more tries, there was sth 294 ID error
EDIT3: seems like its the wrong rom, how can i find out which rom will work?
EDIT4: semms like i got a working rom its at 10%
EDIT5: Device working again, usb working perfectly again, dunno why, but camera still doesnt work, there happens nothing if i press on it and display turns black sometimes as before.
i flashed an O2 Rom now, from my provider.
My last question now is, what about warranty, how can i know that uspl/hsapl is fully removed from device and how to find out if device is now a case of warrnty, where can i check it? because i want a working camera again, so i think i need the warranty
Some infos:
O2 Provider ROM flashed
On Bootloader i see:
BLAC100 32M
SPL-1.54.0000
MicroP-Blackstone (LED) v6
In my opinion its fine for warranty, but i want someone to confirm this.
And thank you alot for ur help and work in this forum =)

If you have an official HTC upgrade rom on your device you are fine for warranty. As your SPL says 1.54.0000 this means you haven't got USPL or HSPL on your device, so you're fine.

thank you very much

Serious HD2 00028002 error CAN"T USE PHONE!

Hello fellow HD2 users,
I've got an HD2 T-Mobile UK. I've just tried my luck with HSPL, I've succeessfully installed HSPL using the steps in this thread: http://forum.xda-developers.com/showthread.php?t=609477
However, when I copied the LEOIMG.nbh (1.48 offiicial rom) file to the micro SD 8GB card; and rebooted, things seemed ok untill it suddenly stopped the progress of flashing the ROM and gave me a Grey screen with the Error 00028002 "not Allow" sort of thing.
So I tried yanking battery out, rebooting normally, it displays a grey triangle with " ! " in the middle and then displays the 00028002 error then back to Tri colour bootloader, I noticed that the HSPL is gone and its back now to 1.42.0000
I even tried a Factory reset, it does the reset I reboot, but it still shows me grey triangle and same routine. I've tried everything now. This bloody T-mobile phone is just useless to me at the moment !
Can you please HELP !!! Thank you so much !
Regards !!

Ok found solution, I just had to install the official T-mobile 1.43.110.0 ROM from this link:
http://rapidshare.com/users/258XUJ
After just switching on the phone with microsd inside, I just plugged the usb and started the RUU and followed the steps and things are back to square one now.
not thrilled that it has been a nightmare so far to get a new rom on.
but at least I can use my phone with its basic functionalities. not gona push my luck again...

You cannot flash official ROMS from the sd because it replaces the SPL with a stock one. Presume it got half way through then decided the ROM was not for your device since it hasd replaced the SPL. Cooked ROMS are ok to flash from SD but for Stock use the RUU.

tell me it's working please.my HD2 from UK T-Mob is same "bricked" and in Slovakia is very very difficult to find somebody who can fix this....i think maybe only the HTC repair center

^
If your phone can load up into the boot loader (tri-color screen) your phone is not bricked.

Deeper Trouble:Same error,but cannot use USB!!!
Guys,
im in even much deeper **** now.I accidentally tried flashing a stock ROM via SD card and now ive gt the same ROM code error.What makes this worse is that my Vista computer is not recognizing any USB connection when i connect my HD2 to the computer.If i need to flash a stock rom via RUU wrapper to get through this stupid ROM code error, i need a USB connection at the first place...which IS NOT WORKING NOW!!!...im sitting duck here guys...i really really need your help on this one.im extremely frustrated and helpless.thanks alot...

When u say USB not working, how do you know?
Put phone in bootloader, connect USB cable,,, on phone does "serial" become "USB"? If yes then just run the flash.

samsamuel said:
When u say USB not working, how do you know?
Put phone in bootloader, connect USB cable,,, on phone does "serial" become "USB"? If yes then just run the flash.
Click to expand...
Click to collapse
Go to this thread Sam as kawshigan started a new thread

semo2010 said:
Ok found solution, I just had to install the official T-mobile 1.43.110.0 ROM from this link:
http://rapidshare.com/users/258XUJ
After just switching on the phone with microsd inside, I just plugged the usb and started the RUU and followed the steps and things are back to square one now.
not thrilled that it has been a nightmare so far to get a new rom on.
but at least I can use my phone with its basic functionalities. not gona push my luck again...
Click to expand...
Click to collapse
broken link

[Q] HD2 cannot turn on...

hi there, im new here and ive been searching on the forum for a long time, but i didnt see any solution for my problem... (or maybe i was blind) so when i was trying to flash back original ROM from bootloader screen through USB, it didnt show my current image version info on the screen, but it did show the image version that im going to upgrade... however, i still let it updated and it said its succeed. but when my phone going to reboot, it stuck on the "stick together" screen... btw, my phone is PB81120 SS-B3 SPL-2.08. HSPL 8G XE. hope someone can help me solve my problem... thanks first :]

Go into bootloader again and connect the device to your PC via usb (should show USB at the the bottom in bootloader) and run the Rom Update Utility again. But first make sure the ROM is compatible with TmoUS Hd2.
I would recommend flashing stock from the bootloader just to be safe.

but i was trying to install T-Mobile_HD2_MR_Software_2.13.531.1 under bootloader, and it still the same... :[

Was that what you origonally tried updating to? Or was it a custom rom you had tried?
Sent from my HTC HD2 using XDA App

that was the latest i tried to updating to, or any different kinds of version of original ROMs... before, i tried to update a custom ROM on it first, but it failed :[ actually, when i first got my phone it was unlocked, so while i was waiting to get the unlock code for it, i decided to install android on it... later on i had successfuly putting android on it, and by that time i got my unlock code too. then i typed it in and my phone just reboot and stuck on the "stick together" screen till now... so i started to look through the forum and found out that most ppl said is to reflash the ROM back to the original one first, and then everything would be alright... but i guess it didnt work on my phone D:

Have you tried a hard reset? (Hold both volume buttons while booting)
Sent from my HTC HD2 using XDA App

yeah... i tried everything :[

hi,
don't worry, your problem is resolvable. (as long as you see something on screen, you are lucky.)
1) When the stick together screen comes, do you see any numbers on left bottom after waiting for some time say 1 min.
if yes, then your problem is missing OS image only.
in this case, take out the battery. after that, keep volume down pressed all the time and insert battery again. press power button, if mobile does not start immediately. please keep volume down button pressed till the time tricolor screen does not come on. after that connect cable to computer and update normally.
2) If you don't see any number, it may mean multiple things, which all are resolvable. (most likely bootloader stuck in another mode.)
in any case, try steps in given in 1 and report back. before reporting back please install mtty on your computer as it is needed to send commands to mobile to get out of this mode.

Try this: http://forum.xda-developers.com/showthread.php?t=668347

Bootloader not detected at PC

Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help

install windows mobile device center to your pc.otherwise it doesn't recognize it.

I have installed WMDC. But it doesn't recognize it at all.

but cwm isnt flashed from bootloader? r u using magldr or clk?

MAGLDR but also in Flasher mode nothing happend. In WMDC i have already disabled USB Connections but also -.- nothing

try another pc. and last solution format pc(i did so a few weeks ago when i met the same problem)

after last time i formated my computer imy phone wasnt detected in computer ...in bootloader i couldnt see USB just serial ...i just installed activesync ...and right after phone was detected ...so try to install activesync and see

[q] htc hd2 flashing rom issue
Can anybody help me.I have MAGDLR and the Bootloader installed by a previous chap who owned the phone, all the correct versions. THe phone HD2 (T-Mobile), when I got it, had Gingerbread on,but the FM radio was not working,
so I thought an Upgrade was in order. I went to the MIUI website and downloaded the latest stable rom and followed the instructions as best as possible, but I had problems with the
Bootloader going from Serial to USB and being able to flash the rom like that. I then tried the loading the rom ZIP file to the SD card, and then using Clockwork orange recovery to
to install the ZIP file from SD card. That being said, I rebooted and the phone just stayed hung on the HTC logo screen. (And I didn't do a back up, before I started.)
I eventualy found a Jaws MIUI rom, that instaling via Clockwork Orange, worked, but it is Froyo and not a lot of stuff works very well. What is the correct procedure to install
from SD card, with Clockwork Mod Recovery? The Roms that I download, do I have to unpack the zip, do something on the files? I have read that depending on the rom that you have, when
doing a ClockWorkMod Recovery installation, that you need to have the right Size partition or image disk version of the Clockwork recovery MOD, But I can't swap and change this as my USB does not work between the phone and the PC.
I have installed active sysnc, does not work and I have tried this both on my Desktop and Laptop. As the one response suggests, Formatting your PC seems a bit extreme.
Help, Pleeeeeeeeez!
Thanks

Asdoos said:
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
Click to expand...
Click to collapse
try with another usb cable

After many tests with other PC´s and USB cables and different Windows / Linux installations I have noticed that my phone doesn't charge -.-
I think its an Hardware Porblem of my Phone. Does anyone know how to fix it?

Usb port is gone on your phone get it replaced.
Sent from my HTC HD2 using XDA App

Hello, I'd love to mention one thing bec I got the same problem like some fri. No need to worry fri.My problem troubleshooting is " Just install Windows Mobile Device Center". Thanks all and I love xda.