Related
Dear All,
I have had my SPV now for about 4 weeks now and very pleased with it. However, twice in the last week it hasn't responded when I turned it
on and ended up removing and re-inserting the battery. When it comes back, it starts with the "Welcome to Pocket PC" setup wizard and all my data is gone.
Has anyone else had this problem. This problem has happened with both
versions of the ROM. The only s/w I am running is
Tube (VisualIT)
MS Arcade Pack (Pacman, DigDug etc)
MS Voice Command
Agenda Fusion
CityTime
Regards & Thanks
Chris
Yeah i got the same problem. But it happens when I upgraded my ExtRom from Orange.com. Sometimes it stays at suspend mode, then i have to perform a hard reset to wake up the device. Very odd.
dfens said:
Dear All,
I have had my SPV now for about 4 weeks now and very pleased with it. However, twice in the last week it hasn't responded when I turned it
on and ended up removing and re-inserting the battery. When it comes back, it starts with the "Welcome to Pocket PC" setup wizard and all my data is gone.
Has anyone else had this problem. This problem has happened with both
versions of the ROM.
Click to expand...
Click to collapse
I have had my M1000 for about four weeks too now and although it occasionally soft resets it never fails to respond to the power button. Maybe you have a faulty phone?
On a different note, you say you have Voice Command, I was looking for places that sell it in the UK but it appears to only be available in the US, if you could let me know where you got it I would be really grateful.
Hope you sort your phone out!
Fin
High all
No probs so far
Swiss m1000 installed Programs
Pocket Hack Master ( Overlock your PDA )
Pocket Mechanic ( Clean Defragment and more )
Snails ( adictive Worms(TM) Clone )
Crazy Cart ( adictive Mario Cart(TM) clone
and lots more.
Im overlocking my CPU to 530 MHZ and no Trubbles so far.
Got the thing for two months now, running in this config for about one month.
Peace
Yep, I am having the same problem or much the same problem. The unite works fine until every four or five days when I notice that the bluetooth light and the green phone radio light are flashing (even though bluetooth is turned off). It does not respond to the power button and then lights go off when I try a soft reset. The only way I can get it back on it with a hard reset.
It does not seem to be a battery issue as the battery is fully charged and when I try plugging in the Charger (before doing the hard reset) the charging light does not light up. I have had the same problem with several M1000s from Orange.
Anyone have any ideas at to what might be going on?
Thanks,
Steve
Yep, I am having the same problem or much the same problem. The unite works fine until every four or five days when I notice that the bluetooth light and the green phone radio light are flashing (even though bluetooth is turned off). It does not respond to the power button and then lights go off when I try a soft reset. The only way I can get it back on it with a hard reset.
It does not seem to be a battery issue as the battery is fully charged and when I try plugging in the Charger (before doing the hard reset) the charging light does not light up. I have had the same problem with several M1000s from Orange.
Anyone have any ideas at to what might be going on?
Thanks,
Steve
With Orange Switzerland SPV M1000 I experience the following problems:
1) Bluetooth lights (blue light) and the battery lights flashes even though
bluetooth is not connected and the battery level is fine.
2) Once every other day the device (though fully charged) freezes and I end up doing soft reset.
3) Removing battery already puts the device to soft reset. Orange
4) The activeSync is running without me having to start any activeSync session.
5) Abruptly I get message the memory is full and the device then freeses.
Is anyone having the above problems? How do i resove this?
Many thanks
Swissmate
SteveD said:
Yep, I am having the same problem or much the same problem. The unite works fine until every four or five days when I notice that the bluetooth light and the green phone radio light are flashing (even though bluetooth is turned off). It does not respond to the power button and then lights go off when I try a soft reset. The only way I can get it back on it with a hard reset.
It does not seem to be a battery issue as the battery is fully charged and when I try plugging in the Charger (before doing the hard reset) the charging light does not light up. I have had the same problem with several M1000s from Orange.
Anyone have any ideas at to what might be going on?
Thanks,
Steve
Click to expand...
Click to collapse
SAME PROBLEM AS THE REST OF YOU WHO HAVE THEIR SPV FREEZED UP VERY OFTEN. IN MY CASE IT'S EVERY 3 OR 4 DAYS, POWER BUTTON AND SOFT REST DOES NOT RESPONDE, SO IT'S EITHER HARD RESET OR SOMETIMES SIMPLY REMOVING THE BATTERY DOES THE WORK. I HAD MY PHONE REPLACED 3 TIMES ALREADY AND STILL THE SAME PROBLEM EVEN WITHOUT INSTALLING ADDITIONAL SOFTWARE BUT WHAT CAME BUNDLE WITH THE ORANGE PHONE. IS THIS A ROM BUG ???
SPV M1000 FRANCE
SD CARD 1 GB
OMEGA ONE BATTERY PACK PRO
OMEGA ONE JOURNAL BAR
SPB GPRS MONITORS.
FORTUNATELY I USE THE X BACKUP PROVIDED WITH THE PHONE TO SAVE MY DATA, BUT IT'S TIME COMSUMMING AND REPETITIVE AS AFTER EACH TIME THE PHONE RESETS ITSELF, I HAVE TO RESTORE IT AGAIN AND AGAIN. :evil: :twisted:
IF SOMEBODY COULD IDENTIFY THE PROBLEM, THIS WOULD HELP A LOT OF PEOPLE LIKE ME
THANKS
RICHARD
There have been frequent reports of this problem- Orange are aware of it, and are replacing M1000's as required. They are currently testing a new ROM, so it appears that they think it may be a ROM problem, though it could also be a batch of faulty hardware.
Another possibility
Turning off the record button seems to have helped, could it be that this is being caught and filling memory / draining batrtery?
3rd phone 3 weeks.
Great when working - anyone using a GPS receiver? Tried a TomTom with an XDA 2 lead is not recognised
Re: Another possibility
BobW said:
anyone using a GPS receiver? Tried a TomTom with an XDA 2 lead is not recognised
Click to expand...
Click to collapse
Remember you have to turn of the IR in settings>connections>beam before a GPS will be recognised.
NeilM said:
There have been frequent reports of this problem- Orange are aware of it, and are replacing M1000's as required. They are currently testing a new ROM, so it appears that they think it may be a ROM problem, though it could also be a batch of faulty hardware.
Click to expand...
Click to collapse
we got almost 30 of these at our work, it seems the only one to have this problem is... my one! so i swapped it for another one and it did the same problem... hmm, they must not like power users, the other users are idiots so they dont really mess about with the settings n all
anyhooz, ill be upgrading all of em to SE very soon and i doubt that rom will have the same glitch...
who knows... now that we can confirm (99%) that SE works on the xda II maybe the operators will now make an official upgrade to SE... they have no reason not to
regards
djrm.net said:
we got almost 30 of these at our work, it seems the only one to have this problem is... my one! so i swapped it for another one and it did the same problem... hmm, they must not like power users, the other users are idiots so they dont really mess about with the settings n all
Click to expand...
Click to collapse
Hmm. That is interesting. Only having one here - and having problems - I do not have much to compare.
Do you think the problem comes from changing the standard settings or using extra software then?
By the way the new ROM does not seem to make much difference in terms of this problem, alas!
Exactly the same thing to me...
Every 5 or 6 days... it goes of for no reason, and the only way to wake it up is to hard reset it! weird SPV... maybe some day a nice guy will come up with a solution to our problem! Hopefully...
:shock:
To keep an old thread alive
Those experiencing issues with this device going into coma (requiring Hard Reset to clear)please would you post detailed accounts of when the issue occurs.
Please confirm power settings, what applications were open on the device and whether the radio or BT was on.
Does the problem occur off or on charge, if on does same problem occur if charged from travel charger not dock?
If off charge, if known - state both internal and external battery charge levels when problem occurs?
What is seen on the handset at point of coma?
Working from soft Reset through battery off to hard reset, what was necessary to restore the device and did soft reset or battery off result in a dump?
Could ROM V's and bootloader V's also be stated.
cheers guy's, together we'll crack it
To keep an old Thread Alive
:roll: I have had my phone from about June last year. The first reset occurred about the 3rd Jan this and two more occurring in the past few weeks the last one on sat 12th Feb
The history as I can recall with the last reset is as follows. I took the phone out from work (cradle) Friday afternoon after 4pm don’t think it was put to charge again before the incident also the phone was not used very often as its a work phone. It was on stand by all day Saturday with the green light flashing but no signal input was being received as I was expecting a cal which never came only to find out the phone was off as mentioned by the caller when I called them. Got home about 530pm with the light still flashing and tried to switch the phone on after finding out no signal was received, the light then went out. Could remember this quite distinctly as it happed on the previous occasion. To activate the phone i have to take the battery and sim card out as with the previous occasion put the card in another/different phone to activate it (make a cal) then put the card and battery back in for the phone to work when it would then go through the reset process. Once working on checking, both battery powers were very low think less than 50% as when i checked some time after they were up to 75%
Am in an office with 3 other users and the only one with this problem and am on my 3rd phone since the year started. It seems to be linked with low battery power (both) and extended stand by when it completely shuts down. Trust this would help to get us a stage further.
i have had two m1000's with this problem,
orangecare stepped up for the replacement and i upgraded the 2nd to win2003se and it still does it!
i make scheduled backups now and have learnt to live with it until my contract expires..
on another seperate note..
Remember you have to turn of the IR in settings>connections>beam before a GPS will be recognised.
Click to expand...
Click to collapse
how do i do this in 2003se?
MORE ON THIS
I had an M1000 that worked fine but a small problem occured and orange replaced it - the new one had this problem every 7 days or so - the bluetooth light was flashing although not switched on and when I try to turn phone on it wont - remove/replace bat and resets - I upgraded to ROM 2.02 from this forum but was using origional orange extended rom and it made no difference - if it is a rom problem its in oranges extended rom
I was on a 166wwe - boot loader 1.06 - dont know radio version but was still happening after DCM 2.02 WM2003SE WWE from this forum with radio 1.18.00 and original ORANGE ext rom so if is on ROM is definatley oranges ext rom that has a problem. - HAS ANYONE HAD THIS HAPPEN WHILE ON CHARGE????
THEY REPLACED MY PHONE WITH A REFURB - ITS NOW FINE BUT IM NOT HAPPY
guys lets think here
were all orange subs so its got to be an orange thing (so unlikley to be hardware) - there are people here (myself included) who have upgraded radio and OS so I am begining to think it is in the extended rom on these machines - has anyone who has replaced extended rom had this trouble - I would experiment but no longer have this fault - I never thought Id wish I could get it back but now I think I can see a resolve
we need an orange customer who does not have this trouble to post extended rom on here for us all to try????? - - - Please ??????
it would be nice to crack this one guys keep plugging on
Had my M100 nearly a year now and after many many resets decided to call Orange as I would have thought this was a known problem with them. But according to technical they have never seen this before!!!
There response was ... backup your data! doh!
I told them I did and it was unacceptable to say this as the thing is faulty it takes over an hour to reload the data and it's happend 4 times since I called them 4 days ago.
:twisted:
PS: has anyone got a copy of the original 1.66 rom as you can no longer get it from Orange.
So, last night, I upgraded 3.16 to 4.01.16; THANK YOU!!!!!
But I do have a slight problem. Once you push the power button, or the device times out and turns off, the only way to get it back on is to soft reset. No, I have checked and unchecked the "lock all hardware buttons" box and tried both ways. I don't think it will recieve a phonecall while off, The light flashes green every 3 secs as though it has found GSM signal. I'm going to try again after I get offline and free up this phone line.
Also, why is there a bluetooth help file in this OS version. I have an MDA I.
4.01.16
R6.18
G324e4
Please help, the software is great, but the machine is hosed up!!!!!
If you installed KSE Truefax when creating the ROM, recreate the ROM without it. This was the only time I had this problem.
I did install KSE.
i have to use an sd card now, don't I?????
I can't use my wallaby as an sd writer, can I??????
I thought so,
I thought not.
$H1T!
Well back to the old nokia for a while.......
Thanks Guys!
FAN-FRIGGIN-TASTIC
KSE was hoseing it up, indeed. I recooked a rom, flashed it using SD, and it works like a charm.
???Exactly how does a charm work anyway???
THANK YOU GENTLEMEN*!
*and ladies, where applicable by law
Hi, this is my first post on this forum after going through it for days, and i think i can ask this question without being referred to a wiki or previous post related to my problem. Here goes:
So i just bought a (second hand) QTEK S200. Now, when the guy i bought it from demonstrated it worked flawlessly, but when i got home and reset the whole thing, i can't get bluetooth to work properly.
Let me just note that i've worked with plenty pda's before and have a pretty good (intermediate) knowledge about bluetooth (had a nokia 6680 before, bluetooth heaven btw).
So when i go to settings>connections>bluetooth and i turn bluetooth on (wich works, the blue leds blinks) i try to install a few bluetooth devices (none installed so far), so i click devices>new partnership. It starts to search for devices and show them with theire mac address, he doesn't want to show the device name like all bluetooth enabled device do.
But ok, nevermind that it could be somekind of feature, you never know. So ok i recognize the device i want to add (only two showing, the gps and my pc) and click on it to install it. It asks for the pass, and here i notice that the blue led isn't blinking anymore, so i enter the correct password for the gps (i've added him thousands of times on my ex-cellphone and my GF's cellphone, the code is 0000, like almost all gps mouse) but then it says that the password is incorrect. I try multiple times and nothing.
So ok, i notice the flashing blue led stopped so i re-enable the thing and try again, this multiple times again with the same result.
But then i tried tricking it to keep the blue led flashing, i was trying to make the pda connect to the internet through usb, and that way i got in the settings>connections>connections menu. When i press the 'Add a new modem connection' link you can select a modem that runs on bluetooth, so i got the idea to try and add the gps through this menu. This time it worked, the devices found showed the correct names, and i could add them OK.
So happy as i was i added the com ports and such, all worked ok. Then i started tomtom6, all good, i added the gps with no problems, but when i actually got to navigate, the bluetooth connection dropped constantly, always like: no gps device found for like 40 seconds, then it resumes the navigation and 5 seconds later the connection gets dropped again, so this goes on in a loop forever i guess (tried it about an hour).
Oh, and working with that Comm Manager program doesn't help, i don't think it even works properly, that program doesn't know if the bluetooth is running or not, it just remember the state the button was in last, or something, cause it almost always indicates that the bluetooth is running without it actually running, so i click on it, it 'shuts down' the bluetooth, and when i click on it again, the bluetooth then works for real.
So my conclusion was, i need to get a working firmware or whatever there is some software-related problem here. Because the hardware does actually work, maybe not for long, but it does when it does.
Also, i feell like the pda is running in slowmo, slow reaction times (i know it's not a uber fast device, but sometimes it's really ridiculous how long i have to wait for a program to boot up, or just pressing the start button)
So i checked out the wiki to see if i have a G3 or G4 chip, so won't ruin the s200 when flashing it.
But i just can't make out if i have the G3 or G4. I suppose i have the G3 because SPL shows: 2.09.0000 (all zero's, but 4 of them) but the IPL shows 2.09
everywhere i read about those digits they always compare it to *.*.0001 for the spl and ipl. But there is no 1 at the end! Does this 1 matter? Or is it just the 4 digits at the end?
So this is what my screen shows on the boot up:
IPL 2.09
SPL 2.09.0000
GSM 02.07.20
OS 2.9.7.24
I think this is pretty old.
And another problem (this just doesn't end!) the SD card reader doesn't always show the storage card! I mean like, this is so basic, i don't understand why it doesn't, i've tried with multiple cards, on my pc it works but on the S200 it doesn't.
I hope someone can help me.
I'm also looking into unlock the CID first, and ofcourse it all depends on the type of chip i use, can somebody please confirm what i have?
Also, since all the roms have been removed, and there are soo many, wich is the right one for me? What are those AKU roms? Are they compatible with g3 chips? I don't really know the difference, how does this work?
/edit: ok found out what those aku roms (just updates?), but what then is the difference with the other roms available? And the sd card reader still doesn't work, it's been hours now, i've tried everything. Please someone, help!
Maybe i should shorten my first message:
Bluetooth drops the connection constantly, when i search to pair a device on the s200, when the search is over, the bluetooth shuts down (blue led stops flashing) and i can't add the devices it found, wich is logic, how can you make a connection when bluetooth is disabled? How do i keep bluetooth enabled no matter what? While still being able to shut it down manually.
Comm Manager doesn't work properly (bluetooth shows on when it's off and vice versa)
My SD card reader suddenly doesn't want to work, tried multiple cards, and simultaniously checking them on my computer card reader.
Sometimes slow respondtime.
I've tried everything multiple times, with multiple hard resets.
There's no software installed, everything been tested on a 'clean machine'.
Would upgrading the ROM (wich rom?) solve my problems? And how would i go about that? I've read the wiki but i'm none the wiser (half of the links don't work, i've read the post that everything's been taken down)
Why thank you for all the help. Thought i would at least get a "sorry but it seems your ... is defect you will have to replace it" or "here [link] you will find similar stories with a possible solution"
anyways, to update my post, i rma'd my s200 and it's been two months and two weeks since.. is that normal?
I had been using the great PDAVIET 4.0.0.0.6 TOUCH for almost one week D ) and had installed some software among which is TomTom v6.10 which I was using with my GPS on the road and suddenly the GPS quit talking to me! My Prophet (Qtek S200) never talked again!
I've done the following without being able to recover sounds from my Prophet
1.- soft reset
2.- hard reset
3.- installed Propeht_PV_Temp and then PDAVIET 4.0.0.0.6 TOUCH (At this point the Prophet was able to sound when tapping the screen for about one minute and then lost sounds again)
4.- Installed RUU_Prophet_220734_2207114_024721_NVID.exe and then PDAVIET 4.0.0.0.6 TOUCH
5.- Installed RUU_Prophet_220734_2207114_024721_NVID.exe.
It doesn't even beeps when requesting to tap the screen to start setup after a hard reset.
What is weird is that at a given point and after 6 hours of total silence, it was able to sound for about 1 minute between steps 3 and 4 above.
That looks like a hardware problem, right? Or is there something I am missing or I can do?
Thanks for your opinion.
Addition: I took my Prophet to the seller and they found it to be a hardware problem: one of the speaker connections was loose. When they fixed it, sound was on and off. They later discovered that it was problem in the speaker itself. Somewhere they read this to be a fairly common problem that could be fixed placing a small piece of choth behind the speaker to have stay in place. I did not want that solution and the Prophet was sent to the wholesaler for waranty. It will take 10-15 working days to return. I will post the results.
(Zeusin & JTA, thanks for your help)
---- Finally received my Prophet back from the manufacturer. The speaker was not working. I got a new replacemente prophet. CLOSED!
Hi,
I faced something similar with my prophet, first the sounds went off completely, and then they came on for a few seconds. Then it went coompletely mute.. no sounds
It was a hardware issue, most likely a loose wire connection to the rear speaker. Mine was repaired in 15 mins, so i guess its a common problem. Hope that helps
Check out this thread...
I know that it is for the Magician, but maybe this thread can help you:
http://forum.xda-developers.com/showthread.php?t=234650
-j
Hello, sorry for my english, is not the best.
I've BIG problem with my P3300. originally it came with WM5, after some time I got update from official site for WM6. Had WM6 maybe for 4 months, everything was just perfect while one day my HTC started do funny things like go off it self (white screen when using navigation). It was a once in a week. After some time it started to be like this few times in a day. I thought what I need to do hard reset. Did. Didn't helped. Than I tried to flash my phone to WM6.1. Phone went mad, was constantly switching off it self, screen just freezes and after that you even can't start the phone around 5-10 min. it just want do anything, even if you plug in the charger, indicating orange light want come up. Than I tried to flash with original WM5. Did that, everything was fine for a day, but after the day it went off, i restarted, and than gone wireless and screen started move to the left and to the right aprox 2 mm. When is connected to computer it want connect to ActivSync, it's coming up message: Can't find IP address, try to disconnect phone and connect again... I did manual configurations in network cards and computer, so when you're looking in network connections looks everything fine, but it's still not recognized by ActiveSync :/ Than i send the phone to recovery mode, connected to the computer and updated to WM6. Same thing, screen shaking, wireless not working, goes off. Is strange thing too, in aprox 24 hr memory is filled up to maximum - than is coming up the message: Storage is full, please delete some programs. :/ Hard Reset have to do every single day... Any idea what's can be wrong with my phone? Tried already a lot of things, no more ideas. I think it's software problem... :/
If anyone have any ideas please share with me... Thanks for everyone.
Anyone any ideas? Please, someone... i don't really wanna put phone in to the bin...
Its a hardware isue
Sorry, I have same problems and try same thinks, finaly I send to service and they say its a commone hardware error on electrical micro connections inside cosed by droping the phone down. Before I send it hangs up 2-3 time at day, now its hapen 1 in 10 day if I accedentaly drop the phone
Hardware issue
I think this is hardware problem..., I have some experience with repair HTC smartphones. Freezing, restarting, problem with screen..., GSM etc,,..
In all cases helps Hot air soldering station, find right chip or module (gsm , proc..) and reheating this.. A frequent problem is BROKEN tin joints BGA chips , after impact of equipment. .. sorry for english...
I'm facing the same problem with my old Artemis.
Since I upgrades, I gave it to a friend. It was working perfectly fine months now, until last week.
The phone keeps freezing, doesn't always boot, many times won't even respond to charger pluged in.
Randomly resoldering the board's chips, sound like a long & hard solution :/