Hi, this is my first post on this forum after going through it for days, and i think i can ask this question without being referred to a wiki or previous post related to my problem. Here goes:
So i just bought a (second hand) QTEK S200. Now, when the guy i bought it from demonstrated it worked flawlessly, but when i got home and reset the whole thing, i can't get bluetooth to work properly.
Let me just note that i've worked with plenty pda's before and have a pretty good (intermediate) knowledge about bluetooth (had a nokia 6680 before, bluetooth heaven btw).
So when i go to settings>connections>bluetooth and i turn bluetooth on (wich works, the blue leds blinks) i try to install a few bluetooth devices (none installed so far), so i click devices>new partnership. It starts to search for devices and show them with theire mac address, he doesn't want to show the device name like all bluetooth enabled device do.
But ok, nevermind that it could be somekind of feature, you never know. So ok i recognize the device i want to add (only two showing, the gps and my pc) and click on it to install it. It asks for the pass, and here i notice that the blue led isn't blinking anymore, so i enter the correct password for the gps (i've added him thousands of times on my ex-cellphone and my GF's cellphone, the code is 0000, like almost all gps mouse) but then it says that the password is incorrect. I try multiple times and nothing.
So ok, i notice the flashing blue led stopped so i re-enable the thing and try again, this multiple times again with the same result.
But then i tried tricking it to keep the blue led flashing, i was trying to make the pda connect to the internet through usb, and that way i got in the settings>connections>connections menu. When i press the 'Add a new modem connection' link you can select a modem that runs on bluetooth, so i got the idea to try and add the gps through this menu. This time it worked, the devices found showed the correct names, and i could add them OK.
So happy as i was i added the com ports and such, all worked ok. Then i started tomtom6, all good, i added the gps with no problems, but when i actually got to navigate, the bluetooth connection dropped constantly, always like: no gps device found for like 40 seconds, then it resumes the navigation and 5 seconds later the connection gets dropped again, so this goes on in a loop forever i guess (tried it about an hour).
Oh, and working with that Comm Manager program doesn't help, i don't think it even works properly, that program doesn't know if the bluetooth is running or not, it just remember the state the button was in last, or something, cause it almost always indicates that the bluetooth is running without it actually running, so i click on it, it 'shuts down' the bluetooth, and when i click on it again, the bluetooth then works for real.
So my conclusion was, i need to get a working firmware or whatever there is some software-related problem here. Because the hardware does actually work, maybe not for long, but it does when it does.
Also, i feell like the pda is running in slowmo, slow reaction times (i know it's not a uber fast device, but sometimes it's really ridiculous how long i have to wait for a program to boot up, or just pressing the start button)
So i checked out the wiki to see if i have a G3 or G4 chip, so won't ruin the s200 when flashing it.
But i just can't make out if i have the G3 or G4. I suppose i have the G3 because SPL shows: 2.09.0000 (all zero's, but 4 of them) but the IPL shows 2.09
everywhere i read about those digits they always compare it to *.*.0001 for the spl and ipl. But there is no 1 at the end! Does this 1 matter? Or is it just the 4 digits at the end?
So this is what my screen shows on the boot up:
IPL 2.09
SPL 2.09.0000
GSM 02.07.20
OS 2.9.7.24
I think this is pretty old.
And another problem (this just doesn't end!) the SD card reader doesn't always show the storage card! I mean like, this is so basic, i don't understand why it doesn't, i've tried with multiple cards, on my pc it works but on the S200 it doesn't.
I hope someone can help me.
I'm also looking into unlock the CID first, and ofcourse it all depends on the type of chip i use, can somebody please confirm what i have?
Also, since all the roms have been removed, and there are soo many, wich is the right one for me? What are those AKU roms? Are they compatible with g3 chips? I don't really know the difference, how does this work?
/edit: ok found out what those aku roms (just updates?), but what then is the difference with the other roms available? And the sd card reader still doesn't work, it's been hours now, i've tried everything. Please someone, help!
Maybe i should shorten my first message:
Bluetooth drops the connection constantly, when i search to pair a device on the s200, when the search is over, the bluetooth shuts down (blue led stops flashing) and i can't add the devices it found, wich is logic, how can you make a connection when bluetooth is disabled? How do i keep bluetooth enabled no matter what? While still being able to shut it down manually.
Comm Manager doesn't work properly (bluetooth shows on when it's off and vice versa)
My SD card reader suddenly doesn't want to work, tried multiple cards, and simultaniously checking them on my computer card reader.
Sometimes slow respondtime.
I've tried everything multiple times, with multiple hard resets.
There's no software installed, everything been tested on a 'clean machine'.
Would upgrading the ROM (wich rom?) solve my problems? And how would i go about that? I've read the wiki but i'm none the wiser (half of the links don't work, i've read the post that everything's been taken down)
Why thank you for all the help. Thought i would at least get a "sorry but it seems your ... is defect you will have to replace it" or "here [link] you will find similar stories with a possible solution"
anyways, to update my post, i rma'd my s200 and it's been two months and two weeks since.. is that normal?
Related
So I bought a TyTN around two months ago... I use it on the Cingular network with no problems the entire time.
Today around noon it starts bugging out on me. It freezes, so I restart it and it isn't reading the SIM for some reason. I restart again, it takes ten minutes to recognize the SIM, and when it does it freezes.
I looked up on how to hard reset it, and it seemed to be going all right, but then it continued to have the same problems. Now it doesn't even recognize the SIM.
When I connect the phone to my laptop via USB it gives a quick three tones and Activesync is not registering anything. I need to know what to do to try and get my phone functional again...
Sorry for reposting, but someone in the previous thread I created stated I needed more info in my header... Valid point...
Also, when starting up, during the HTC splash, "No GSM" appears among the red letters that are shown... I don't know if that has anything to do with it.
I read that there's lots of tweaks for WM5 for the 8525, but then I seen mention of a WM6 available, too. I presume it's a free upgrade on the AT&T website, or elsewhere online.
Now for the questions. Which OS works best for this device? Do the tweaks made for WM5 work with WM6 as well? Should I upgrade to WM6, or stay with WM5? For the GPS (maps), does it work with both or just one of the options?
Now for other (off-topic) experiences I have with my new [reconditioned] device.
a) After inserting my SIM card, about an half hour later, I attempted to call an 800 number (to activate a new bank debit card), which it didn't fully connect the call, although the call timer was running. It wouldn't let me end the attempted call, either, so I removed the battery and reinserted it.
b) Exploring the device further, I noticed that some menus didn't close when I tap the "red X" in the corner. I even tried to expand (pull out the keyboard on) the device, but it shows the "red X" of the location from portrait. as well as from the landscape! For example, it wouldn't close the "selecting which size to send photos" option screen. After waiting about a minute, I had to remove the battery to get rid of those screens, which is a major pain to keep removing the battery!
c) Later on, the last phone call that I made wouldn't hang up (end call) -- I even tapped 'End Call' about 5 times, not to mention pressed the red phone icon on the main navigation keys about 3 times. I haven't used the device since, except to place my old Samsung Sync's memory card with pictures, songs, and videos inside it.
The device seems very slow to close/end programs, and I've just received it yesterday! [I have not hacked, tweaked, or done anything else to it, either; I've only set the time, date, and owner's info.] Is this normal for the 8525? Would installing the WM5 tweaks [HTweakC 2.1b] -- or updating to WM6 -- increase the device's response time and overall performance? Or do I have a still faulty, reconditioned 8525?
Sorry for the long questions, I just wanted to give background into the device. Thanks in advance for all help in this matter!
You seem to be way behind as you use WM5. First thing you do after reading this: UPGRADE TO WM6.1
Most tweaks of WM5 will ofcourse work on WM6. WM6 is faster and much much better.
Do you know about soft-reset? No need to take out the battery! Just soft-reset.
And most of your problems of hang-ing can be solved by newer version of Windows Mobile! WM6.1
In case if your new to upgrading, you may read my small guide. If your completely new to Pocket PC, this might help you too. Also, consider using a free taskmanager such as wkTaskMan to close applications completely.
Regards,
Carty..
Carty, thanks for the quick reply!
As a brief background, for about the past 6 months, I was infatuated with the HTC Tilt [8925], because of the built-in GPS, Wi-Fi, 3-MP camera, & media player. Later, from reading other opinions on the 8525 on this board and discovering that it was compatible with GPS services, I decided to "sacrifice" the 3-MP camera, as the 8525 was about $100 cheaper on eBay.
I am pretty new to the Pocket PC, as my cellular device; I have used computers since 1996, though. That being said, it's not even been 24 hours since I've tinkered with the 8525 (as the eBay one never worked at all). I take it that the 8525 is an older device, as I've seen posts dating back to 2006. I just bought one on eBay 2 weeks ago, and had it replaced at an AT&T repair/replace shop yesterday.
I see the reset button on the bottom of the device; I just didn't know when to use it. I presumed it could only be used if the device wouldn't turn on at all. [As you can tell, I'm overly cautious with my new cellular equipment.] Also, I read about the "hard reset" -- holding down the 2 option buttons on the front and then the reset on the bottom of the device; however, I didn't know when to use the hard reset, either.
I will read your tutorials, then will install WM6 ASAP. Then, I will return with my findings. Wish me luck!!
Now I'm having issues with the update of WM6! The device stalls at 11%, then the software returns with the following:
"ERROR [262]: UPDATE ERROR
The ROM Update Utility has encountered communication errors during the update process. The program will guide you step-by-step to recover from the errors so you can continue with the update."
I tried the [Recovery] button 2 more times, following the screens to the letter, but with the same result . . . the software stalls at 11%.
Any ideas? This is very frustrating!!
Man, I finally got it to install WM6! I had to literally remove every single program that was running under my "name" with the XP-MC OS. I even had to "Ctrl+Alt+Delete" the Explorer program and then "open" it (via Task Manager) again! [I didn't restart Windows, though.]
So far, it's back to the align screen, so I'll hope all goes well from there! Be back with more later!
I've made one phone call so far, and it actually did the end call promptly! Thank goodness for small favors! I thought having to do the "flash" about 6 times would have fried the device!
Now that I have the WM6, how do I install the tweaks? Do I copy them to a memory card, to the cell ROM, or something else? I already downloaded "HTweakC 2.1b" but haven't done anything with it yet. What would be my next step to correctly hack the WM6 8525 that I have now? I am a novice at hacking, so talk in layman's terms and please bear with me!
I have a Hermes (Orange SPV 3100 but unlocked). The phone has stopped working but everything else is fine.
I've tried putting other sim cards into it, cleaned all the sim contacts etc with no success at all. As far as it's concerned, there is no valid connection. Phone and data connections don't work. All the Windows settings and programs run fine, it's just the phone that doesn't so I have a pda without a phone! I wasn't trying to flash a rom - the op system is all as original except for the unlock.
I don't think it's worth enough to pay for a professional repair so any suggestions for tracing and curing the problem and hints as to whether its likely to be a faulty connection, faulty parts or software problem?
Thanks.
I have the exact same phone, and similar problem. The difference is my phone is not completely unusable, it sometimes works for a while and sometimes doesnt.
I have just - 10 mins ago - flashed a new radio rom to see if it helps and so far (10 minutes!), so good. But I will need to leave it for a couple of days to see if it works properly.
Is there an "X" beside the signal icon? Also have you checked the Comm Manager and disable the phone and enable it again?
Ah well I didnt need to leave it for a couple of days, its not working again even with new radio rom.
Ive tried new o/s, new bootloader and new radio but still the same problem, nothing else to try really ?
(btw: Mine usually has an exclaimation mark next to signal strength.)
Carthief When did the problem first start occurring? Did you flash a radio/OS ROM and it started to happen, or did it just happen out of the blue?
Sorry I did not see this post...http://forum.xda-developers.com/showthread.php?t=562486
I don't know dude. Maybe one of the senior members can help out.
Shawn80 said:
Is there an "X" beside the signal icon? Also have you checked the Comm Manager and disable the phone and enable it again?
Click to expand...
Click to collapse
I will check tomorrow. I am using a different phone at the moment and have left the Hermes at the office.
Hi Shawn, yeah that post covers when my phones problem started - I hadnt flashed anything recently when it started messing up.
I've tried tonight;
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
Problem 5:
METHOD 1
But I didn't flash the patched radio.
Phone is working at the moment... I'll update if it is still working or not tomorrow, if its still working maybe Batxda could try it out as well
--------------
Update:
--------------
Phone worked all night, and this morning, but froze up this afternoon and needed rebooting. It's currently working ... but probably not for long! My battery is running out very fast as well.
Shawn80 said:
Is there an "X" beside the signal icon? Also have you checked the Comm Manager and disable the phone and enable it again?
Click to expand...
Click to collapse
Hi again. Yes, there is an "x" beside the signal icon (normally meaning that phone is turned off) and also beside the connectivity icon (two horiz arrows and a "x" meaning no active connection). Also, I've just noticed that both of those icons no longer respond to stylus taps. All the other icons do.
I've tried turning the phone on via Setup > Connections > Comms and Setup > Personal > phone. Neither work, in fact, they do not respond at all.
I haven't tried the cure that Carthief tried but then, I've never flashed any roms on this phone either. I am apprehensive about that because I haven't done it before so, if that's the solution, I would need to find a free evening and do lots of reading.
BTW, the unlocking was done ages ago professionally, not by me.
Any ideas?
Thanks.
Batxda said:
Hi again. Yes, there is an "x" beside the signal icon (normally meaning that phone is turned off) and also beside the connectivity icon (two horiz arrows and a "x" meaning no active connection). Also, I've just noticed that both of those icons no longer respond to stylus taps. All the other icons do.
I've tried turning the phone on via Setup > Connections > Comms and Setup > Personal > phone. Neither work, in fact, they do not respond at all.
I haven't tried the cure that Carthief tried but then, I've never flashed any roms on this phone either. I am apprehensive about that because I haven't done it before so, if that's the solution, I would need to find a free evening and do lots of reading.
BTW, the unlocking was done ages ago professionally, not by me.
Any ideas?
Thanks.
Click to expand...
Click to collapse
Maybe I missed it but I did not see any mention of your doing a Hard Reset. (I assume you have tried soft resets) In general if the problem persists after this it rules out most software issues. I also think it's worth a try because of your comment about the icon being unresponsive.
Mike
Mike
I had done a hard reset but, just to be sure, I've just done it again. After the first it locked up at the password screen so I did a few more. Next, I let the Orange config run through. With the third, I removed the battery before Orange it did its thing. Both the same - no active phone but no lock-up either.
Icons on top bar still not active and x's against them.
When I go to settings > Personal > Comms, the phone icon is highlighted and appears to be "on" (no "x") but the top bar icons still show that it isn't. When the comms phone icon is clicked, the cross appears and the phone is, presumably, turned off and can't be turned on again.
When I go to settings > Personal > Phone, it says that the phone is off, would I like to turn it on. Click yes but it doesn't work.
BTW, I'm using an O2 sim card which works perfectly in a NIKI (touch dual).
I hope this is a software not hardware problem. Is there any point in flashing a new radio or complete windows rom? If so, which one would you recommend (it's a minefield for one of little brain)
Many thanks.
B
I did think you might already have tried a hard reset. In general that tends to point towards hardware, BUT corruption of the ROMs can occur. Unfortunately that is not my area of expertise. Hopefully someone will recommend something here. You could always look on http://www.mrvanx.org/thg/ making sure you have Hardspl installed.
Mike
Hi all, my phone is still not working completely but it does seem to be staying alive for longer periods now.
I have just downloaded the latest (from Oct. 2007) software upgrade from Orange for the Hermes - I think it is windows mobile 5, not sure yet. I cant install it tonight but Im going to try that tommorow.
I downloaded the Orange update but it wouldn't load on my phone. all I got was an error message which said it was the wrong rom for the phone. I don't know whether that's because I've had it unlocked or maybe my rom is newer than the update. anyway, I'm no further forward.
I've just noticed that, in Settings > Device Information, it is blank against the radio version and the Protocol version and that there is no IMEI listed either. I guess that means the radio is corrupted so I will try installing a new one. It is op version 14.123.1.614 and ROM version 1.23.61.4. Which radio is recommended.
What does the missing IMEI number mean or is that also connected with the missing radio?
B
Hi Batxda, I dont know which radio to recommend, mine is Radio version: 1.47.30.10 and ROM version: 3.54.255.3
My phone has now been working for over 24hrs, battery has stayed charged as well... so I haven't installed the Orange rom yet.
I bought a new phone having pretty much given up on this one... and now it seems to be working again!
Nope. Not working. Ran for over 48hrs but locked/froze up today with calls going straight to answerphone, battery drained from 70% to 20% in about two hours as well!
My last attempt is going to be running the phone with no memory card in, and no sim card with phone disabled. Will report back.
Have you had any luck Batxda ?
Radio flashes all lock up - help please
carthief said:
Nope. Not working. ...............
Have you had any luck Batxda ?
Click to expand...
Click to collapse
Sorry to hear that. I've had different but similarly unsuccessful times. I hope your experiment goes well.
I flashed with HardSPL (SPL-2.10.Olipro) then tried to flash a Radio.
1st I tried v 1.11.00.00 running from the PC. It froze so I had to unplug it. That messed everything up and I ended up with it stuck on the bootloader screen (Type 2a) so I used mtty and found that command "set 16 0" worked so I could return to WM5.
2nd I tried to flash radio v 1.47.00.10 from the SD card. It started OK, got to about 20% and stopped. That was at 11:15. Its now 13:30, 2.25 hours later and it hasn't moved in that time. I am going to have to stop it but I'm sure it will end up corrupted again.
H E L P anybody, how can I flash a radio to this damned thing?
BTW, it is a Hermes 100.
B
Batxda when I reflashed a new radio I just followed the guide here:
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=18&Itemid=26
It sounds like you've gone through the same procedure as me so you've probably already followed that guide...
I don't know what to suggest, but if it was me, and the radio wouldn't flash, I would (being a bit dim ) try it a few more times until I was exhausted...
I've just rebooted mine to see if I could provoke it to do anything with no sim/memory cards in. It gets to the password entry screen and tells me I've entered the wrong password but I know its the right password !! Does anyone know where/how these phones store the password ?
carthief said:
Batxda when I reflashed a new radio I just followed the guide here:
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=18&Itemid=26
It sounds like you've gone through the same procedure as me so you've probably already followed that guide...
I don't know what to suggest, but if it was me, and the radio wouldn't flash, I would (being a bit dim ) try it a few more times until I was exhausted...
I've just rebooted mine to see if I could provoke it to do anything with no sim/memory cards in. It gets to the password entry screen and tells me I've entered the wrong password but I know its the right password !! Does anyone know where/how these phones store the password ?
Click to expand...
Click to collapse
I have a AT&T 8525 Hermes that was having No GSM issues.
I'm not sure if both of you seen the No GSM message when booting the phone (when it was bootable) & if you did, here's what I did to get the phone working again.
I removed the battery & pressed hard against the back stainless steel plate especially around the area near the battery contacts. It worked for mine & the No GSM issue would go away. If it happened again, then I repeat the same procedure & it works again.
My conclusion is that the GSM chip has broken or loose contacts with the motherboard so as long as the contacts is good, that keeps the radio working. BTW, this phone was dropped before & after that, this issue started happening.
Lastly, I'm not sure if your issue is really with the password...that's just a symptom of something else that is wrong with the system...not sure if it's entirely software or perhaps hardware or combination of both.
konker said:
I have a AT&T 8525 Hermes that was having No GSM issues.
I'm not sure if both of you seen the No GSM message when booting the phone (when it was bootable) ...
Click to expand...
Click to collapse
No, I haven't seen that message.
Since the last post, I've tried to flash various radio roms, two WM6 roms and what XDA says is the original WM5 Orange SVP M3100 rom for my phone (v slightly different version number though). All of them hang at around 11% or give an error message. I've ended up with a Dopod start screen (from one of the WM6 attempts) and a funny mixture of colours but I can still start Windows so I've got a pda with no phone access.
Taking your message on board, I'm starting to think that there is a hardware fault preventing the radio from being recognised. That is unless there is something fundamental that, being a n00b at this, I'm not doing. I've put Hard SPL on the phone, flashed roms and failed, reset it with MTTY (set 16 0) and used a variety of radio and main roms. Is there anything else I should have done?
I'm about to give up and see what it's value is and then see if I can get a hardware repair (if it's worth it). Otherwise, I've heard that some fetes have a throw the mobile competition ......... !!!!!!
B
I just bought a XDA (HTC-Wizard) on ebay. I was very lucky with it, everything worked fine. Phone, wifi etc. But I recognized the former user had left some files, adres-books, private information and programs, so I decided to make a hard reboot.
Now I have two serious problems: the wifi doesn't work, I think my XDA thinks it has no wifi, in the comm manager the button cannot be set at on (without cross), and the XDA thinks there's no SD.
Someone any idea of what's the stupid problem, I just spent hours on the internet, but could not find the solution, not even on this forum.
BTW booting the machine it says it has ipl and spl 2.21.0001
Rietje
Hello rietjejansen,
I have a similar problem. The CommManager doesn't activate/deactivate my WiFi. I can only do it through some 3rd party app, like Homescreen++. For me, the problem comes from the CommManager of WM6.1 OR from the ROM I'm using right now.
You can try two things:
- download and install Homescreen++ (it's free). Try to activate your WiFi from there.
- flash a new ROM and see how it goes.
If you opt for the ROM, you have a G4 device in hands, just notice the final group of numbers of your IPL and SPL: 0001. For our Wizards, three 'zeros' mean a G4 device. So search for G4 safe ROMs.
Cheers
Thank you, Nandobang. I tried a third party wifi program, but that's not the solution.
Als flashing the ROM is not possible. Last week a totally new world came to me, trying to flash the ROM, but everythin I tried went out wrong.
Now I'm giving it up.
Fixed the problem
Hello
It’s unbelievable, but true: the problem is fixed.
After I threw away the Wizard, I bought, on Ebay again, a HTC P3300 (Artemis). Was very happy etc. After a few weeks I recognized the batteries of both phones are almost the same. I put the battery of the Artemis in the Wizard, and guess what? Everything fine, nothing the matter. After a time, I put back again the ‘old’ battery and the phone now is working. The old accu is a bad one, I ordered a new one, but in the meantime everything is still allright.
Now I think that a bad, old, battery which doesn’t charge very well was the cause of my problems.
A few days ago, I bought an 8525 phone off my friend for $25. He told me that he only used the phone for a month, so it was practically brand new. I have been tinkering with it for the past couple days, using Wifi to download games and things, and it has been fine. The phone worked, texting worked, everything was perfect.
About two days ago, I accidentally dropped it about a foot onto wet asphalt. The battery fell out and the touch screen got a few drops on it, but I dried it all off, turned on the phone and tested everything; no problems from dropping it.
At some point later that night, the phone started having problems. It would randomly freeze every few minutes while in use, and I would have to take out the battery to reset it. Some buttons on the touch screen wouldn't respond at times, but then work later (the buttons next to volume, service and wifi or whatever). Then my texting and phone service stopped working. I couldn't get service anywhere that I walked, and the Settings button wouldn't work. I also tried to reconfigure the connection, but that didn't help.
I came home and found the phone I had previously, and I put the SIM card into it to see if that was the problem, which it is not. The old phone works fine with the SIM.
I don't know what the problem is, but there are a few things that may have caused it to happen:
-dropped it in rain
-plugged USB into a laptop that only turns on, but does nothing else
-maybe got virus from browsing internet on Wifi
-overheating (there was a point where the back was really hot after sitting on the USB)
-games/applications installed messing with system
Those are some examples of what I've done with the phone, but that's it.
Here is device info:
-Hermes 8525
-Windows Mobile 6 Pro
-CE OS 5.2.1948 (Build 18548.0.7.0)
-Processor: SC32442-400MHz
-ROM Version: Schap's 4.31
-ROM Date: 10/03/07
Sorry if I haven't provided enough information on the problem, I'm new to all of this stuff, but I hope somebody can help.
Actually, my problem has changed.
I attempted to put a new ROM on, and it seems I did something wrong. When I turn on my phone, it does the boot animation, and then the screen turns white and doesn't do anything else. I attempted to hard-reboot, but nothing happened.
I went into My Computer on my desktop, and the folder 'Mobile Device' showed up. I clicked inside of it, and apparently my entire OS is gone off the phone. How do I install a new OS?
I hope you had Hard SPL V7 installed or you will need to find your shipped stock rom.
If you did, great.
1. Format 2Gb or less sd card FAT32. Copy .nbh file of rom onto it and rename to hermimg.nbh.
2. Insert sd card into Hermes and boot into bootloader.
3. If you did everything right then follow onscreen instructions.
If you didn't & can't find your shipped stock rom, you are now the proud owner of a Hermes paperweight....
Instead of taking the battery out, there is a reset hole on the bottom near the IR port. Push in with your stylus.
I have the "No GSM" text showing up when I turn on the phone, and then it goes to the white screen. I tried to do the mtty.exe thing, but I couldn't figure out how to use the program.
I was going to try the fix that uses Visual Studio and Windows Embedded, but I'm pretty sure my phone doesn't have kitl (which I need to do that).
Most of the fixes suggested require using ActiveSync to connect to the phone, however, my ActiveSync doesn't connect. It knows the phone is there, but it can't connect, which disables me from updating the ROM.
When I attempt to flash a ROM, it says that the current ROM image on the phone is ' ' (just an empty space) and it asks if I want to update to the newer ROM image. It gets to the point where the progress bar appears on my phones screen, but as soon as it hits 1%, the whole thing fails and I get an error on the computer saying it could not connect.
Currently, I am attempting the method to fix the white screen by removing the battery for 20 minutes, and then I'm going to try the method that says to remove the battery and put it back in multiple times to fix the 'No GSM', but I'm pretty sure I messed the radio up.
@ultramag69 - I have an SD card, but I don't have a port or anything small enough on my computer to insert it. What should I do to do what you said?
Buy an adaptor, should only be a few bucks...
SD method is the easiest way to fix the problem BUT as was said earlier , you need Hard SPL V7 on your Hermes 1st.
You could also try putting your Hermes into bootloader, attaching it to the USB and flashing that way. Just make sure that "Allow USB Connections" has been unticked in Activesync on the PC.
At least you might be able to install Hard SPL V7 that way...