Looking for Kaiser/P4550/tytn II parts - Tilt, TyTN II, MDA Vario III Accessories

Hi,
My Kaiser just fell on the floor a few days ago , and now I can't turn it on anymore After dissasembling it , I guess that it's the board wich is within the keyboard part that is faulty because even the vibrator doesn't work !
I already tried to plug it to the pc and stuff but it's not recognized .
So I was wondering if one of you guys have this part to sell ( a broken HTC would be suitable if this part works ) or if you can tell me where to find it !
( because I'm in ireland for the moment and you can't repair it here ... )
Thanks in advance for your answers

up

http://www.pocketpctechs.com/main~unit~HTC_Kaiser-971~area~repairs-HTC+Kaiser+Parts+Only.htm

Related

broken digitizer

Hi guys it s been a while that i am getting help from this community but this time i really need help.
My touch screen on my kaiser has been broken ( it didn't crash anywhere i just tapped it and then a broke) . Anyway i am trying to find a replacement part somewhere in europe ( i dont want an outside country because of the customs) .
I understand though that there are two replacement lcds for this model. I i somewhere read that there are two different touch screens too.
Do u know which way i can find which part is right for me. ANd do u know any good store inside E.U where i can find several parts ( i need that big button's cable ).
Notice that i have open my mobile twice.
Thanks guys.
Bought that one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370116736244
From Hong Kong, took 7 days to send to Germany without taxes

Manufacture defect or what !!!!!!

Hello all ..
i am Mohammed from Egypt it's first time to use HTC TYTN 2 and it's wonderful device ... i have a question about something .. i bought my tytn2 5 days ago and when i looked into the usb slot there was this thin gray plastic that has the copper pins in it .. i noticed a small crack in the last right quarter of this gray plastic which make this gray plastic not completely horizontal it's bent down at last two pins from the right .. lol i know it little weird but i want to make sure that this is not manufacture defect .. and if it was i would replace it
thanks all and i hope that someone will tell me whether if i was right or wrong
Hi Mohamed,
Welcome to XDA-DEV's and to the Kaiser (=TyTN II) world !!
I'm sad to tell you I think this gray piece MUST be horizontal and rectangular.
There's a possibility that somebody put the stylus in the USB connection hole instead of the Soft-Reset hole (near to it).
** Possibly your USB connection does not work properly ** so that, if you have the chance, ask for another device or to repair this one.
Have good luck, and don't stop visiting and collaborating with Xda-dev's !!
thanks m8 i told that to HTC supprot here in egypt but they told me that if the charge is working well and sync too so it's ok and if something happen i would go to them and they will change the usb slot ... so what do u think shall stay with this device or make a problem to change it even if it works in charging and sync very well !!!!
hdlhkhgikn said:
thanks m8 i told that to HTC supprot here in egypt but they told me that if the charge is working well and sync too so it's ok and if something happen i would go to them and they will change the usb slot ... so what do u think shall stay with this device or make a problem to change it even if it works in charging and sync very well !!!!
Click to expand...
Click to collapse
A suggestion from my experience: take a copy of all your communications with technical service, etc. so that if you have problems, you'll be able to ask again without loosing warranty.
If you have the chance to have a new device, I think it's better - maybe you can sync or charge "today" but not "tomorrow", or you can't use another cable or headphones.
Even, if you want to sell your device, it looses value with the broken piece.
thanks m8 i will do what u just said .. thanks so much

the touch screen not work anymore :(((

hello guys
i have serious problem . my touch screen is not working anymore
from 2 months i dropped mu phone down and after that the touch become not accurate place ( some times i toch in one place and the phone activate another icon about 1 cm far from my touch ) but after 3 days its become normal again . but now the touch screen its not working at all
i dont know what happened and what is the broplem and haw i can fix it .
any help is appreciated
sorry for the long text
bikaso said:
hello guys
i have serious problem . my touch screen is not working anymore
from 2 months i dropped mu phone down and after that the touch become not accurate place ( some times i toch in one place and the phone activate another icon about 1 cm far from my touch ) but after 3 days its become normal again . but now the touch screen its not working at all
i dont know what happened and what is the broplem and haw i can fix it .
any help is appreciated
sorry for the long text
Click to expand...
Click to collapse
Sounds a lot like you may need a new screen/digitizer. Does any rings appear on screen, i.e. newton rings?
no , no rings appear on screen
but i feel that the digitizer is little bit up from the lift side thats it
this is matter??
thanks for ur replay
bikaso said:
hello guys
i have serious problem . my touch screen is not working anymore
from 2 months i dropped mu phone down and after that the touch become not accurate place ( some times i toch in one place and the phone activate another icon about 1 cm far from my touch ) but after 3 days its become normal again . but now the touch screen its not working at all
i dont know what happened and what is the broplem and haw i can fix it .
any help is appreciated
sorry for the long text
Click to expand...
Click to collapse
Sounds like the datacabel has been broken... or it moved a little bit which causes the troubles.
I think now it moved to fare so no data gets to the phone.
If you know how, try to open it in order to check the connection.
Let me know if you got it or have questions.
(I hope you understand my english) Otherwise i´m going to say it other words.)
asdfasdf12323 said:
Sounds like the datacabel has been broken... or it moved a little bit which causes the troubles.
I think now it moved to fare so no data gets to the phone.
If you know how, try to open it in order to check the connection.
Let me know if you got it or have questions.
(I hope you understand my english) Otherwise i´m going to say it other words.)
Click to expand...
Click to collapse
yes i can understand u v.good
u know my english is not good then if yours is not good and mine also >>> then we can understand each others j/k
i understand what u mean but i dont know where is this cable and haw i can open the phone and reach it .. if u have image or something i can know from it haw this cable looks like it will be great ..
anyway thanks alot for ur help and if u can answer me for this question this will be great
Hehe, thats good!
As i didn´t open mine yet i have no pictures nor could find any on internet. But when you know how to open the phone (the screws on the back) you might be able to fix it by checking the cabel. Befor doing this take a look how the cabel looks like (ebay offers them) So you know where to look at. If your unsure how to do it aske someone to do it.
btw you aren´t form germany, are you? In case you are i could offer you to take a look at it or maybe also fix it.
asdfasdf12323 said:
Hehe, thats good!
As i didn´t open mine yet i have no pictures nor could find any on internet. But when you know how to open the phone (the screws on the back) you might be able to fix it by checking the cabel. Befor doing this take a look how the cabel looks like (ebay offers them) So you know where to look at. If your unsure how to do it aske someone to do it.
btw you aren´t form germany, are you? In case you are i could offer you to take a look at it or maybe also fix it.
Click to expand...
Click to collapse
thanks man v. much , no i'm from egypt . i like ur country
anyway i will try to find this screw driver and then i will start to open it .
but anyway u dont think its from the digitizer ????? right?
If there arent any bigger scratch i don´t think so. because it would cause, that nothing would work at all but you said it did a couple of times although it was a bit wrong.
The other thing is, that i canßt imagine that the Hardware (the board) is broken because this normaly cause bigger damage and could easly effect the other chips and functions on you phone.
This leads me to my conclusion that the data cabel might be broken or isn´t anymore plugged in.
Please sent some sunshine to germany. I could need some between all the ice and snow ;-)
yeah , i have alot of it here more sunshine and more hot
yes now i can understand . u r right . what u said is logic , i will start on it and i will let u know .
thanks alot man i really appreciate that much, seems like i have new friend

HTC HD2 Touchscreen doesn't work!

Hello out there.
Something bad happened today.
My HTC HD2 touchscreen suddenly doesn't react anymore to touches.
Windows Phone 7 was flashed at that moment.
10 min. ago, I flashed an Android ROM, and the screen worked again for 1-2 minutes, before it started to ignore touches again.
I've had it for 2 years now so warranty is over.
What is wrong? A loose connection? Software error?
It's the best phone I've ever had, so please help! :-(
Try to push power button hard.I think digitizer is moved or dead...
Vagabond83 said:
Try to push power button hard.I think digitizer is moved or dead...
Click to expand...
Click to collapse
Okay, I tried to push the power button hard, and the screen now reacts to touches again. But I think that it will stop working again suddenly. What's a permanent solution? Disassemble the phone and tighten the loose connection or what?
BTW Thanks for the answer!
mooooooa said:
Okay, I tried to push the power button hard, and the screen now reacts to touches again. But I think that it will stop working again suddenly. What's a permanent solution? Disassemble the phone and tighten the loose connection or what?
BTW Thanks for the answer!
Click to expand...
Click to collapse
Hi my friend Mooooooa,
don´t use Voodoo-Tricks; Magic Glas-Marbels onto the Touch and don´t press the I/O Button to hard ( this can damage the tinly little Power-Button, too ). You have to replace your almost dead Touchscreen to fix your Problem correct.
I recommend to Change the LCD too, means--->BUY in denmark a complete tested "LCD/TOUCH" Combo ( need only 2 Days to your Home-Adress, maybe faster ), because it´s a lot easier for you.
Here you find my Step by Step Instuctions:
http://mperlitsch.hintergrundbild.com/htc_hd2.htm#Zerlegeanleitung
All the Best 4 u and also your HD2,
Michael
Agree, same issue happened to me last week on my hd2 and that phone was not dropped or hit. The digitizer just stopped working. I replaced the digitizer with a new one and voila, touchscreen is working again. Just make sure you dont buy a cheapo digitizer cus it may not work.
Perlitschke said:
Hi my friend Mooooooa,
don´t use Voodoo-Tricks; Magic Glas-Marbels onto the Touch and don´t press the I/O Button to hard ( this can damage the tinly little Power-Button, too ). You have to replace your almost dead Touchscreen to fix your Problem correct.
I recommend to Change the LCD too, means--->BUY in denmark a complete tested "LCD/TOUCH" Combo ( need only 2 Days to your Home-Adress, maybe faster ), because it´s a lot easier for you.
Here you find my Step by Step Instuctions:
http://mperlitsch.hintergrundbild.com/htc_hd2.htm#Zerlegeanleitung
All the Best 4 u and also your HD2,
Michael
Click to expand...
Click to collapse
Thanks for the suggestion. But I think it's to expensive, the combo costs about 140€ here. I can buy a second hand HD2 for about 200€.
enelyam said:
Agree, same issue happened to me last week on my hd2 and that phone was not dropped or hit. The digitizer just stopped working. I replaced the digitizer with a new one and voila, touchscreen is working again. Just make sure you dont buy a cheapo digitizer cus it may not work.
Click to expand...
Click to collapse
So you only replaced the digitizer and not the whole LCD screen? Because that's cheaper then, about 60€ for a new original one.
mooooooa said:
Thanks for the suggestion. But I think it's to expensive, the combo costs about 140€ here. I can buy a second hand HD2 for about 200€.
Click to expand...
Click to collapse
Here in Germany you have to Pay for a complete Touch/LCD Module 80-85 Euros ( incl. Shippingcosts ). Denmark belongs to the European Union ( or not ?! ), so you can use ( if you have 3-4 Days time and a few Shipping-Euros more to Denmark ) every Dealer inside the EU...
You will never get a used HD2 in good Condition ( maybe with the same Killer-Touchscreen ) for only 80 Euro-Bucks.
Best Regards,
Micha
---------- Post added at 08:48 PM ---------- Previous post was at 08:38 PM ----------
mooooooa said:
So you only replaced the digitizer and not the whole LCD screen? Because that's cheaper then, about 60€ for a new original one.
Click to expand...
Click to collapse
If you have a Micro-Touch 0x30 ( 60H00295 Combo) inside your HD2 you have the old crappy Solder-Version. I know a lot People, they have big trouble to do that ( my whole Workplace is full with murdered HD2 Modules ). If you have a 0x50 ( 60H00300) the Replacement is easy because its the ClickOn Touchscreen. The Only Problem ist to remove the Touch from the LCD. I need 20 Seconds to do that, but i have expierence to do that. And the next Problem you have is to find the Original Sticky-Special Tape to bring all back together...
I recommend 1st timern to buy a Complete new Combo. This is mutch easier but include enough work and big chances to destroy your HD2...
Best Regards and be carefull to do that ( you can Crack the LCD-Module very easy ),
Micha
---------- Post added at 09:44 PM ---------- Previous post was at 08:48 PM ----------
mooooooa said:
Thanks for the suggestion. But I think it's to expensive, the combo costs about 140€ here. I can buy a second hand HD2 for about 200€.
Click to expand...
Click to collapse
if you don´t find a cheap solution you can have mine HD2 here:
http://mperlitsch.hintergrundbild.com/hdr/IMG_1036.JPG
http://mperlitsch.hintergrundbild.com/hdr/IMG_1037.JPG
Everything is NEW ( LCD; TOUCH; FLEX-Cable; Cover and used Battery-Cover with special finish).
I don´t need that HD2 ( looks new and everythink works fine ). So you can have that for free if you want. Installed is Artemis-ROM V65 German ( i can flash the DAN Version too ).
So you have another Option, if everything is going wrong...
Greetings,
Micha ( from Kiel -Baltic Sea-; nearby Danmark )
Perlitschke said:
if you don´t find a cheap solution you can have mine HD2 here:
http://mperlitsch.hintergrundbild.com/hdr/IMG_1036.JPG
http://mperlitsch.hintergrundbild.com/hdr/IMG_1037.JPG
Everything is NEW ( LCD; TOUCH; FLEX-Cable; Cover and used Battery-Cover with special finish).
I don´t need that HD2 ( looks new and everythink works fine ). So you can have that for free if you want. Installed is Artemis-ROM V65 German ( i can flash the DAN Version too ).
So you have another Option, if everything is going wrong...
Greetings,
Micha ( from Kiel -Baltic Sea-; nearby Danmark )
Click to expand...
Click to collapse
Hello again. I have tried only once to disassemble the HTC HD2, and that wasn't a success, I unfortunately broke something. . If you don't need the HD2 your talking about, I would appreciate that a lot. I like the HTC HD2 phone, and I would be happy if I could still have one. It's the greatest phone ever, in my opinion.
- Off topic: My parents live nearby the German border, so they often do purchases in Flensburg. And I've been to Kiel before, nice town. . I live myself in Odense, about 1½ hours driven from Flensburg.
I have a different problem.My friend have a HD2,and I have install him a android on HD2.Its worked fine for some while,and then he(my friend) started a CWM and do a some of "system restore" and touch is stopped working,and now I dont know what is the problem,what is he did,anyone pls help,I want to fix the phone for him ? any solutions ? anyone had a problem of this kind ?
Sorry for my bad english.
Vagabond83 said:
Try to push power button hard.I think digitizer is moved or dead...
Click to expand...
Click to collapse
Thank you so much ! You're a life saver ! Was about to give up and suddenly read your comment and moved the power button and pressed it hard, tried touching the screen, it started working ! Thank you !

Help with some Touch problem.

Hi everyone ! I just bought a galaxy s4 display ( not new ) and i'm encountering some problem with it. Since i can't refund it in any way as the seller vanished, i can only hope to repair it . The problem is that the down part of the screen ( from 30% to the bottom ) doesn't work, i mean, just the touch doesn't work. I'm asking myself if is not that chip who's the problem and if i can replace it. I'd like to repair it, that costed me like 100$. UNLESS Isn't that chip the real problem i would appreciate if you told me what to do, of course if there is something to do.
NOTE : The display came without the front chrome frame, and i was almost sure that these two can't be 'split' ( whatever i had another brand new frame and i can use it. )
Ah, and if it counts in any way ( i have no idea how ) i have 2 more Tocuh+display with different problem. [ I wanna give as many information as possible ]
Im a noob who got scammed, just take me easy.
Do you get any clue ? I couldn't find too much related to this chip, only that it's the touch controller and it sound like main part of the whole touch . BUT HEY ! I have a display+touch whose touch is working but display is green, i think it may be working. Just tell me what you think about changing that chip, OR if it possible? AND HOW because i'm a noob !

Categories

Resources