Hi guys it s been a while that i am getting help from this community but this time i really need help.
My touch screen on my kaiser has been broken ( it didn't crash anywhere i just tapped it and then a broke) . Anyway i am trying to find a replacement part somewhere in europe ( i dont want an outside country because of the customs) .
I understand though that there are two replacement lcds for this model. I i somewhere read that there are two different touch screens too.
Do u know which way i can find which part is right for me. ANd do u know any good store inside E.U where i can find several parts ( i need that big button's cable ).
Notice that i have open my mobile twice.
Thanks guys.
Bought that one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=370116736244
From Hong Kong, took 7 days to send to Germany without taxes
Related
after uprom my hermes become hot and the touchscreen can't use. after that it alway auto click in top right coner, then the touch screen can't use. i put out the bat after 5 minute and put in every thing OK , about 3 minute later it continues the problem.
how can i repair it? new touch screen?? thanks
It's a problem with the motherboard, not the screen. Been there; time for service.
thanks. now i'm not in my country i don't know where to repair it
buy a cheap fone and when i come backto VietNam i will repair it.
Now i'm living in taiwan and don't know chinese bc i leaning in english
If any body have a picture of main board pls send me .
No body know?
Hi,
My Kaiser just fell on the floor a few days ago , and now I can't turn it on anymore After dissasembling it , I guess that it's the board wich is within the keyboard part that is faulty because even the vibrator doesn't work !
I already tried to plug it to the pc and stuff but it's not recognized .
So I was wondering if one of you guys have this part to sell ( a broken HTC would be suitable if this part works ) or if you can tell me where to find it !
( because I'm in ireland for the moment and you can't repair it here ... )
Thanks in advance for your answers
up
http://www.pocketpctechs.com/main~unit~HTC_Kaiser-971~area~repairs-HTC+Kaiser+Parts+Only.htm
I have just got my replacement digitizer in the mail 2day from Hong Kong and installed it just now, all is working perfectly as new again. I did a hard reset when the touch screen was first playing up, so I have lost all my themes, settings etc but luckily my office docs etc are still intact.
Anyhow, I made a video on how to replace the touch screen, its only quick as I did not go from the disasembly part, as there is already videos and tutorials on this, so I just documented on the actual digitizer replacement, which is actually basic 2-5mins work, but I thought a vid would be good for any noobs needing it in the future.
Once I edit it all up I will post the video here.
If anyone needs help on replacing the digitizer just ask. DON'T be tricked into buying the LCD + Digitizer if you only need the touch screen, as it is very easy to do without the lcd, though some ppl disagree.
Thanks for reading, thread will be updatd with Vid asap.
Hi X86
I have a crack on the upper plastic case, thats prob. why I have dirt showing on screen. In your opinion where is it located and can I clean it ?
It seems as if (if the crack is on the actual original housing, not just a add-on case) that dirt/dust has fallen down inbetween the digitizer and the LCD, so you can see it through the touchscreen right?
This is fairly simple to fix, you will either need to patch up the crack with silicone or something (best from the inside so it does'nt look messy) OR buy yourself a whole nw housing which cost about US15-$20.
Then just pull your elf/in apart and use cotton tips and wipes to thoroughly clean the LCD and insides.
If you need any help, just let me know via PM or here.
?Good Luck!
Thanks
That was my feeling, now I just need courage to take apart the casing (either repair or replace )
Thanks for bringing up this issue in the forum and extending your hand to others.
I appreciate it alot.
Hi x86
I have read the sticky for disassembling the elf. Can you tell me if it's necessary to unscrew anything and remove the rear speaker in order to remove the front panel ?
Edit: I think I found the answer in the next pics, the 4 screws attach to the front panel, right ?
Hi, i've just entered the world of winmo. i've recently wrecked my Elfin. But i can't seem to figured it out whether it's the LCD or the digitizer is broken...
1) my Elfin's screen turns to white with a few red and black stripes on the lower left corner, it doesn't react to any touch gesture.
2) i can still activesync the device and seems that my SD card is still working, i could copy out my PIMcontacts...thank goodness
3) the alarm still rings the next morning, i assume my device is still operating, of course now i've taken out the battery.
4) i've ask the phone shop for repair enquiries and they said that the replacement parts are not for retail selling in my country, Malaysia... so it needs to send back my Elfin to OEM and takes about 3 weeks time and cost around USD $ 130 bucks....
5) my friends told me it wasn't worth it, thus i was thinking of looking for help online and finally i found this thread...
6) can anyone offer few pieces of info? i thank you 1st.
bjonmy said:
Hi, i've just entered the world of winmo. i've recently wrecked my Elfin. But i can't seem to figured it out whether it's the LCD or the digitizer is broken...
1) my Elfin's screen turns to white with a few red and black stripes on the lower left corner, it doesn't react to any touch gesture.
2) i can still activesync the device and seems that my SD card is still working, i could copy out my PIMcontacts...thank goodness
3) the alarm still rings the next morning, i assume my device is still operating, of course now i've taken out the battery.
4) i've ask the phone shop for repair enquiries and they said that the replacement parts are not for retail selling in my country, Malaysia... so it needs to send back my Elfin to OEM and takes about 3 weeks time and cost around USD $ 130 bucks....
5) my friends told me it wasn't worth it, thus i was thinking of looking for help online and finally i found this thread...
6) can anyone offer few pieces of info? i thank you 1st.
Click to expand...
Click to collapse
That sounds like both a Digitizer and LCD issue.
Red and white strips is caused by the screen, while the phone not sensing your fingers is caused by digitizer.
But you still managed to use something like mymobiler to rescue your stuff right?
Yeah, you're in Malaysia right? In Singapore, to get this items, we have to get it off ebay or dealextreme.com.
But be careful with this, it void warrenty.
If you send it to HTC service centre, it may cost $160> Singapore dollars.
Cheers,
Jeremy
Hi All
I have acquired an old HD2 (India version 'unlocked') from a cousin. The phone's touch screen is not responding and I believe I would have to get it replaced (or do so myself).
Now to resurrect HD2 I need an LCD + touch screen digitiser (the screen is cracked at the bottom n I can even see bit of the chip inside). Hence the following questions:
1. Does anyone know if the Indian version has a socket type or solder type of LCD + digitizer panel?
2. Anywhere I can get an OEM version of the panel? (preferably in India or at the least delivered in India)
3. What will it cost me if I go to the service center to get it replaced if anyone has an expericene with service center in Delhi (I would be going to a service center in New Delhi)
There is a slight chance that I might need to get the buttons ribbon replaced as well. I would not be keen on spending too much.
Any input is appreciated. (Just in case this thread should be in another section or if the question has been asked before, I apologise in advance. The MODs can move it to the appropriate location.)
sahilarora911 said:
Hi All
I have acquired an old HD2 (India version 'unlocked') from a cousin. The phone's touch screen is not responding and I believe I would have to get it replaced (or do so myself).
Now to resurrect HD2 I need an LCD + touch screen digitiser (the screen is cracked at the bottom n I can even see bit of the chip inside). Hence the following questions:
1. Does anyone know if the Indian version has a socket type or solder type of LCD + digitizer panel?
2. Anywhere I can get an OEM version of the panel? (preferably in India or at the least delivered in India)
3. What will it cost me if I go to the service center to get it replaced if anyone has an expericene with service center in Delhi (I would be going to a service center in New Delhi)
There is a slight chance that I might need to get the buttons ribbon replaced as well. I would not be keen on spending too much.
Any input is appreciated. (Just in case this thread should be in another section or if the question has been asked before, I apologise in advance. The MODs can move it to the appropriate location.)
Click to expand...
Click to collapse
AFAIK there are only 3 types of HD2:
- EU/International
- TMOUS
- Telstra
I don't really know what the last one is, but you can tell the EU and TMOUS apart easily. If the phone has a T-Mobile branding at the top and has green and red call and end call buttons then it's TMOUS. Otherwise the likelihood is that it's an EU/International (no T-Mobile logo and white buttons). Figure out which yours is and then find a guide to take apart and replace the screen of that particular model.
Thanks!! It has white buttons n no T-mobile branding (T-mobile is not there in India). So I suppose it is the international version.
I believe the International variant has a solder type of connection. Am I correct?
Now only if some Indian folks can guide me where to find the parts (which can be shipped to India, don't want to end up spending too much) or some feedback on the service centers in India.
Edit: How much would it cost getting this done in UK? I'm gonna be in UK at this month's end.
sahilarora911 said:
Thanks!! It has white buttons n no T-mobile branding (T-mobile is not there in India). So I suppose it is the international version.
I believe the International variant has a solder type of connection. Am I correct?
Now only if some Indian folks can guide me where to find the parts (which can be shipped to India, don't want to end up spending too much) or some feedback on the service centers in India.
Edit: How much would it cost getting this done in UK? I'm gonna be in UK at this month's end.
Click to expand...
Click to collapse
As far as you need a combo(lcd+touchscreen), it doesn't matter what type, any model for hd2 can be mounted on.
Finding it on ebay could be the cheapest choice, most of suppliers deliver worldwide.
Be careful if buying from ebay as quality of parts vary drastically ...
full lcd & digitizers as a matching pair will cross fit to any HD2.
You can see the digitizer type in original bootloader screen details:
"MicroP (Touch) 0x30" you have inside your Phone a "60H00295" *solder
"MicroP (Touch) 0x50" you have inside your Phone a "60H00300" *connector
Hi everyone ! I just bought a galaxy s4 display ( not new ) and i'm encountering some problem with it. Since i can't refund it in any way as the seller vanished, i can only hope to repair it . The problem is that the down part of the screen ( from 30% to the bottom ) doesn't work, i mean, just the touch doesn't work. I'm asking myself if is not that chip who's the problem and if i can replace it. I'd like to repair it, that costed me like 100$. UNLESS Isn't that chip the real problem i would appreciate if you told me what to do, of course if there is something to do.
NOTE : The display came without the front chrome frame, and i was almost sure that these two can't be 'split' ( whatever i had another brand new frame and i can use it. )
Ah, and if it counts in any way ( i have no idea how ) i have 2 more Tocuh+display with different problem. [ I wanna give as many information as possible ]
Im a noob who got scammed, just take me easy.
Do you get any clue ? I couldn't find too much related to this chip, only that it's the touch controller and it sound like main part of the whole touch . BUT HEY ! I have a display+touch whose touch is working but display is green, i think it may be working. Just tell me what you think about changing that chip, OR if it possible? AND HOW because i'm a noob !