Related
Any ideas what could be causing this or more importantly how to fix it?? Thanks! the headset is a aliph jawbone
Did you try using a different headset? From my experiences, even the same brand of headsets can have different voice quality depending on the model.
it is defiantly not the headset. This brand is the BEST ONE on the market. I just reinstalled my phone and have the same problem but i refuse to believe it is the headset. I am going to try it on a different phone tonight.
it could be the jawbone.. and no its not the BEST ONE on the market as u put it.. try another BT and see if u hear the sound.. if u dont then guess what its your BEST ONE jawbone.. but if u do hear the sound its your bluetooth so try updating the radio
i tried the jawbone with another phone and it works on that. So it IS the wizard. And yes it is the best, unless you happen to have a recommendation for another one because it looks like i might be in the market for a new one. Any idea what i could update my radio to? I just updated to molski.biz's newest rom so i have
ROM: 3.3.0.0
IPL: not included
SPL: not included
Radio: 1.19.11
AKU: AKU3.3
i really want to get this thing going this headset is immaculate.
okay i updated the radio rom to 2.69 and it is STILL happening. I have found one other report of this happening with a wizard on the web somewhere and there was no solution on there. Is it my wizard? Other bluetooth things work fine (my GPS works perfectly) And once connected This one works gine also. it is just this initial loud buzzing noise.
It doesn't even happen if i pick it up form the phone then there is noise.
it only seems to happen when i hit the "call accept" button on the side of my bluetooth headset.
i remember my jabra 250v not working w/ my samsung t809 but other ear peices would.. however, my buddies jawbone works with my 8525.. i recommend taking the ear peice to cingular store and have them try to pair it with one of thier phones.. either a 8125 or 8525 or even 3125 and see if it works without any issues..
i think i am going to do that on friday. i have like another 20days before i have to return it. Thank you for your help. This is so lame i really REALLY love the headset :-/
I use a Motorola Handsfree BT kit in my car and with my 8125 callers hear the same thing. It's not as loud if I hit the answer button on my phone vs. the Motorola remote answer button.
It was a lot worst before I flashed my phone with WM6. Seems better now.
My theory is that it's feedback from the phone's mic with my set but if you are using a headset that wouldn't be the case.
My callers will have to put up with it.
Scott
sounds like the exact same problem
so lame. i wonder if it is hardware defect.
I have an MDA with a jawbone as well and my callers say they hear the same loud buzz!
Okay so it is probably a problem with the phone it self, i bet it is how sensitive the mic is. The Jawbone and it's very sensitive mic and a bluetooth car one that also probably has a very sensitive mic both have the issue. I wonder if theres any solution to this.
Try turning off the vibrate option on the phone- that solved this exact same problem for me...
can anyone verify that? i stupidly returned my jawbone yesterday before i saw it cause i had given up hope but i'd gladly by a new one if that was true =) (headset > vibration imo) Thanks!
I have a Plantronics 640 and disabling vibrate solves the problem for me.
So. Lame. Oh well. looks like i need to rebuy my headset. Doh. Thanks all for your input. Someone should add htis to a wiki/faq as it is a very cruddy problem.
Hi guys,
I've been scouring the web for a number of days now with no success. Was wondering if anyone is experiencing the same problem and if anyone knows if this can be fixed.
I have a HTC P3600i, with ROM 3.00.707.18 (latest ENG ROM I could find) and have been using a Jabra BT8010 (firmware 1.33) for some months with no problems on A2DP or Handsfree (even switching back and forth is ok).
Have just got myself a new Dell BH200 stereo BT headset (for better bass) and while A2DP is working pretty fine (very nice), I'm finding that I can't use the headset for incoming or outgoing calls at all.
Everytime I try doing calls, the headset icon on the phone screen disappears after 5 or so seconds, and the headset itself switches off right after.
Am hoping someone can point me to the right direction, thanks..
Well two years later
I own a Dopod C730 and lo and behold I bought a Dell BH200 and I have the exact problem descibed above. I have the latest rom and I have tried reseting the smartphone all for naught.
Well I hope someone has figured this one out at some point or else I am going to be disappointed in my new Christmas gift
Well, I gave up and sold off my BH200 already. Am back to using the Jabra BT8010.
same problem here with my HTC Touch (3452). It's really frustrating to have to remove the headset every time u have to take a call. did anyone fimd a solution to this?
an123 said:
same problem here with my HTC Touch (3452). It's really frustrating to have to remove the headset every time u have to take a call. did anyone fimd a solution to this?
Click to expand...
Click to collapse
I am not using touch. Mine is Asus P535. WM6
Do double pairing. 2 diffrent mode
1) Hi Fi Stereo
2) Hands free
Music would mute when the call is recieved. When you end the call the music comes back.
myc said:
Mine is Asus P535. WM6. Do double pairing. 2 diffrent mode
1) Hi Fi Stereo
2) Hands free
Music would mute when the call is recieved. When you end the call the music comes back.
Click to expand...
Click to collapse
This didn't work for me at all, on my HTC P3600i with the Dell BH200 headset. Pairing was ok, but as soon as there was an incoming call, the Dell headset would ring, and then silence.. I'd also notice that the headset icon on my phone would disappear and the headset itself would turn off.
My Jabra BT8010 headset, on the other hand, paired just fine as both handsfree and wireless stereo device. In fact, I've ditched the BH200 and am using the BT8010 till now.
Well how come i aint see this thread . Ok now BH200 works fine and it has no issues ( as you guys should understand if it works with ASUS , NOKIA , SAMSUNG phone ).The problem is HTC's coding . It doesnt support AVRPS, thats the service which is necesary for Phone to switch to calls when received and switch back to music. Now jabra uses a different technology ... But you will have to compramise on the quality of music in BH200
( its awesome ) and more over it looks like a music head set any ways .
damn! is there any workaround? or is AVRPS hardware specific? after A2DP and AVRCP, no we have another acronym to add to the lexicon
Same problem here, tested BH200 with Universal WM6 and Touch HD, headphones switch off seemingly when they receive handsfree request.
Tested them with WM5, lo and behold, it worked. Now I wonder - how come that they work with WM5 BT stack and not with WM6? Any ideas?
Well, from what I gather, at least the good news is that AVRPS is not hardware-specific... so there should be a suitable workaround to this problem for anyone using WM6.
I bought my pair of Dell BH-200 headphones yesterday and while I'm absolutely thrilled by the perfect (at this price) sound quality when playing music, I'm rather annoyed by the fact that I have to take off my headphones every time I want to receive a call. After all, that's what a headset is for, right!?
In any case, here are the specs of my phone:
HTC Touch Elfin P3452, running an up-to-date Windows Mobile 6.1 (Onyx ROM)
I'm considering upgrading to Windows Mobile 6.5 these days to see if that would do the trick... has anyone of you guys tried the Dell headphones' headset compatibility when running WM 6.5? Going back to WM5 is definitely not a option, since I didn't quite enjoy the looks & ergonomics of that OS...
P.S.: Upgrading to WM 6.5 didn't do the trick, unfortunately So I'm pretty much stuck and I don't want to return the headphones since I really enjoy them, of course once I ignore how they don't actually function as a proper headset... Any help would be greatly appreciated!
I just found this fix for the situation:
http://social.microsoft.com/Forums/...s/thread/368efd50-ce24-453a-a31c-e6747c698082
Try setting the registry value:
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\UseESCO = DWORD:0
Click to expand...
Click to collapse
The best part is, it seems to be actually working (I'm with Touch HD with Win 6.1).
So... I've been very hesitant to post this here.
I originally updated to the Haykuro sapphire port some two weeks ago; I have since then tried the "Dude" mod, and the JF ADP 1.5 mod as well.
They all have exactly this same problem: My Lubix LC1 stereo bluetooth headset no longer works properly with the G1. The phone //says// it is connected with both the A2DP (music) and the HSP (phone) protocols; and the A2DP connection works perfectly. But the HSP connection is essentially non-existent, despite the phone saying it is connected under "Bluetooth Settings".
When I try to call someone w/ the phone, the audio is routed to and from the phone itself. There is no way to route the call to the bluetooth headset at all. This problem has persisted through all three versions; I have flashed and re-flashed, etc.
I have gone through two LC1 bluetooth headsets (a mishap with a rather large, rather bored dog.) They both behave in exactly this same way.
The bluetooth is working w/ my wife's Jabra 855 headset. And it worked perfectly fine in the 1.1 and 1.0 firmwares.
So... what's the deal? I'm not enough of a "computer-person" to know how to hack this myself, but if there were a way to port the 1.1 firmware's bluetooth profile to the 1.5 software, that would be awesome.
Much as it's nice to listen to music through the G1, that's not useful at the expense of the headset.
Is my only choice, if I want the 1.5/cupcake firmware, to //REALLY// purchase a new bluetooth headset thanks to the reversion/breaking caused by the Cupcake update itself?
Please help!
each new major upgrade version also comes with a matching radio firmware.
you only upgraded the system image - leaving the device unsynced with the radio image. Its a known issue. once you will upgrade your radio image most of your problem will go away.
radio image for Cupcake 1.5 can be downloaded from official HTC website.
No, I updated the radio. It had no effect on this problem whatsoever. I've done a clean downgrade/upgrade with each of the various 1.5 mods.
This is a problem with the 1.5 software. Even w/ the 1.5's radio and the JF 1.42 mod the LC1 worked perfectly.
No Devices Found
I have the most recent firmware, baseband, etc, but when I search for devices, it never finds any Bluetooth Devices.
Silly question -- but have you been putting those devices into pairing mode?
I am having the same exact problem with my BlueAnt V1 bluetooth headset. With the latest 1.5 builds across the board with the exception of the UK version that released a week ago I cannot use my bluetooth headset at all. It goes through the pairing as normal and shows connected (I even get the jazzy blue outline in the dial screen) but no audio to the headset what so ever same with my Car kit. What changed in the latest builds to the bluetooth profile?
you are not alone, same problem here with German G1 and Cupcake. It does pair with my navigation system and/or Motorola HF800. My navigation system can access the phone, read phone book and dial - but I do have no sound. Incoming calls do ring on the navigation system/headset, but if I pick up the call there is no audio connection. Any idea what to do?
Actually I consider to root and flash e.g. JF firmware hoping that this will bring any change. On the other site I am afraid that this is just waste of time and risk. Strange thing is that there are obvioulsy not many people with same problem, though they do exist and report same problem in various forums.
I have the same exact problem as well. My car radio has bluetooth HSP and A2DP. The A2DP works perfectly but when I dial a call, the HSP doesn't work. However, when I receive a call, it works. Also, I discovered if I disconnect the A2DP profile in the bluetooth settings on the phone, HSP works correctly.
opposite problem- HSP good but A2DP no good
I have the opposite problem as testing567. Phone shows it is paired for voice and media and so does my car (2009 Mazda6). AFAIK when I select AUX on my stereo; it should automatically start the music player on the phone, but it doesn't. When I manually open Music and play a song; it does not output on the phone's speaker nor the car stereo. Weird thing is that when the song is playing; the progress bar shows it playing very fast like it is skipping every 2-3 seconds. As soon as I turn the car off and the bluetooth disconnects; the song automatically resumes playing through the phone's speaker at a normal speed. I do not have another bluetooth audio device to test this with, so I am not sure if it is the car or the phone. No problems with bluetooth phonecalls. My cupcake is the official OTA release and as far as I can tell the radio is up to date (Baseband Version 62.50S.20.17H_2.2219.26I).
Im having the same problems, my bluetooth is paired and when i get a call my bluetooth rings, if i press it once to answer it goes straight to the phone, but if i press it twice i get the audio on my bluetooth. It sucks that you have to press twice just to be able to use your bluetooth. (Try it. Pair your Bluetooth, call yourself with another phone, and answer it by pressing twice on your bluetooth answer button.)
I had the same issue exactly as you describe.
I downloaded the 1.5 Radio version off HTC's website and everything works again
HTH
Smiffy.
Lordsmiff said:
I had the same issue exactly as you describe.
I downloaded the 1.5 Radio version off HTC's website and everything works again
HTH
Smiffy.
Click to expand...
Click to collapse
what's your radio (baseband) version?
mine is Baseband Version 62.50S.20.17H_2.22.19.26I and it takes 5-10 minutes for my already-paired parrot evo 3k to connect when my car turns on.
Hey, is anyone using the bluetooth headset Jabra BT8040, When I first bought the headset, I had no problems using it. But I've noticed a few months ago, that whenever I use the device, the person I'm calling wont be able to hear me but I can hear them. Anyone have any ideas to solve this problem?
Similar problems
I've got the same earpiece and I've had some problems with it, including: unable to pair (or saying it's paired when it really isn't), unable to connect the BT on a call, and sometimes the earpiece will just disconnect from the phone (but the call will still remain active).
That last one is the closest I've come to your issue. I usually have to put the phone in discovery mode (and the earpiece) and try repairing them from scratch.
I've heard from others with this earpiece that they haven't had problems, but I don't know anyone who has this earpiece and the Raphael. Also, I've got the Motorola S9 bt headphones and I haven't had any problems with them. So, I'm not 100% it's the earpiece but then again it could be.
i have this jabra for about 6 months and had no problem at all with Raphael!
Changed ROM
I've just changed the ROM on my phone (as in signature line) so that may change things for me with the Jabra BT.
BPB21 said:
I've just changed the ROM...
Click to expand...
Click to collapse
Please post your results with your new ROM...David.
Updated ROM & BT
Black C5 said:
Please post your results with your new ROM...David.
Click to expand...
Click to collapse
I'm using the updated ROM and radio in my signature line with the Jabra BT8060 (wasn't it? whatever the one we were talking about in this post is) as well as a Motorola S9 and I pair it with my laptop for internet access that way. So far I have not had the same troubles with the Jabra BT as I used to. It could be due to updated drivers for the BT or the fact that I'm not using TF3D (just the new WM6.5 interface).
Either way, I'm having good results so far.
I spoke too soon on BT...
I've spoken too soon on BT. I was trying to get my Motorola S9 working so I could listen to music from my phone. No luck at all - it shows the S9 connected for both the calls and the the music, but it only works on calls and the music plays on the device with the speaker. And it was working just fine this morning. Bluetooth in general is so frustrating to me that I would literally remove it from every costom ROM I use EXCEPT for "Internet Sharing" (on an Acer laptop and netbook) over bluetooth and activesync with a PC. Not just with this phone, but seriously, with BT 2.0 it should work A LOT BETTER than it does.
I have similar issues with several different Moto H700's. I can hear them but they can not hear me. Possibly the BT drivers from HTC need a fix????
I am having a problem pairing a Jawbone 2 with my Fuze. I put the Jawbone 2 into pairing mode, then try to add a new Bluetooth device, but the Fuze can't find it. I recently installed the RRE 21231 WWE 6.5 rom, but don't think that is the problem because the Fuze still pairs with my Pioneer AVIC-F500BT without any problems. Anybody have any ideas?
I believe the RRE roms have compatibility issues with bluetooth headset.. Not sure if there was a fix in his thread. My problem was Touch Pro with RRE (few versions of ROMS), pairs and connected nicely with my Jawbone PRIME. Issue is I can't make calls with it. The calls are still on the phone. When I try to enable the headset option on a call, nothing happens.
Funny thing is sometimes when calls come in, I can pick it up with the Jawbone.. sometimes..
Anyway, I'm now using EnergyROM latest build. No issues with compatibility.
I have no problems with mine pairing to my JB2... The only issues I have with my JB is low sound with my TP. I just can't get the setting right even though I have it all on max volume it still doesn't seem like it is. Try pairing the JB to another phone you might have a faulty JB...