Related
Finally, i got my HD today. Everything is working fine, except for one thing.
I'm not able connect with my bluetooth carkit. I've tried severall things: Carkit searching my device, which was visible and device searching for carkit. Both without success
Anybody an idea what i'm doing wrong here?
This may sound like I'm being condescending, but I'm not. Have you tried turning it off and then back on? The HD has a couple of problems that are solved by a power cycle. If it still doesn't work, then is the carkit compatible with HTC's? It's not a Sony Ericsson one is it? Their Bluetooth tech isn't very pally with other devices.
Acelister said:
This may sound like I'm being condescending, but I'm not. Have you tried turning it off and then back on? The HD has a couple of problems that are solved by a power cycle. If it still doesn't work, then is the carkit compatible with HTC's? It's not a Sony Ericsson one is it? Their Bluetooth tech isn't very pally with other devices.
Click to expand...
Click to collapse
What do you mean with a power cycle?
I turned the device several times off. Performed several resets. No luck. The carkit is working fine with my old HTC 3600
The Bluetooth [for phone/A2DP etc] in WM is pretty retarded when you compare it with phone manufacturers like motorola and nokia who have had it down perfect for years now - it's one of may major gripes with WM (and why I can't wait for Android, then some clever person can hopefully develop a BT interface that WORKS properly...anyway) - I've not tried to hook mine up to the car yet [will try tonight] but if it's any consolation my Diamond took a few go's to get hooked up as well (in both cars - seemed to prefer the Parrot unit though)
Just one thing - you DO have the bluetooth set so that it is visible to other devices right? (I know that may sound a bit patronising, but I have to confess to one time getting really bent out of shape trying to hook up my headphones and eventualy realising that I hadn't set the phone to visible....ahem...)
***EDIT:
Later that day....
Ok - DITTO that - just tried many many times over and my HD will NOT connect to the Parrot 3200 in my car - NOT good [haven't tried the wifes car yet as I'm just too pi55ed off right now]. This unfortunately Is a deal breaker for me and I'll have to sell it on if it wont hook up (how retarded is that, even my humble ancient motorola works perfectly in the cars!)
***Second Edit:
Just FYI/update: Soft reset - and hooked up straight away. (So if you have issues, try a soft reset)
Got my HD yesterday, was able to pair Motorola S9 BT, both in headset and A2DP and listened to podcasts via RSS HUB. Today, nothing works!!!!
Tried soft-rebooting HD and restarting headset to no avail. HELP!
blackb1ade said:
The Bluetooth [for phone/A2DP etc] in WM is pretty retarded when you compare it with phone manufacturers like motorola and nokia who have had it down perfect for years now - it's one of may major gripes with WM (and why I can't wait for Android, then some clever person can hopefully develop a BT interface that WORKS properly...anyway) - I've not tried to hook mine up to the car yet [will try tonight] but if it's any consolation my Diamond took a few go's to get hooked up as well (in both cars - seemed to prefer the Parrot unit though)
Just one thing - you DO have the bluetooth set so that it is visible to other devices right? (I know that may sound a bit patronising, but I have to confess to one time getting really bent out of shape trying to hook up my headphones and eventualy realising that I hadn't set the phone to visible....ahem...)
***EDIT:
Later that day....
Ok - DITTO that - just tried many many times over and my HD will NOT connect to the Parrot 3200 in my car - NOT good [haven't tried the wifes car yet as I'm just too pi55ed off right now]. This unfortunately Is a deal breaker for me and I'll have to sell it on if it wont hook up (how retarded is that, even my humble ancient motorola works perfectly in the cars!)
***Second Edit:
Just FYI/update: Soft reset - and hooked up straight away. (So if you have issues, try a soft reset)
Click to expand...
Click to collapse
Same problem here. I was able to pair my HTC Touch HD with a JVC KW-NX7000 radio/Nav. On the display of the JVC I can see the batterypower of the HTC and the signal of my provider (Vodafone). My adresbook is transferred to the JVC, I can place a call from my JVC and then I get an error. When I turn on the screen of the HD Touch HD and then place a call on my JVC everything works fine. The problem seems to be, that the screen of the phone doesn't turn on when I place a call. When I dial a number on my phone, everything works fine.
I hope that someone has an answer to these problems.
I thought the problems had to do with the JVC but now I have my doubts.
Today I removed my bluetooth-connection and tried to make a new connection between my HTC Touch HD and the JVC KW-NX7000 radio/navigation in my car. On top of the screen of the HTC I saw two icons appear. (Left from the 3G icon)
I was surprised to see everything work, even though it was just for a short period. I could place a call from my JVC, the screen on my HTC turned on, the number was dialed and I got connected. At some point 1 of the 2 icons disappeared and again I wasn't able to make any calls from my JVC. The problem has something to do with those 2 icons which (should) appear when you make a bluetooth connection. I hope that somebody can help me with my problem.
Personally I think the bluetooth is bugged. This is what I have figured out when connecting my headset.
First time I paired everything worked fine. The paring profile was correct. There are two differnt profiles matched -1st the wireless stero and 2nd Headset
So this gives me two functions after pairing - 1 = listening music on my wirless headphones and 2 = making and recieving calls through the heahphones.
This gave me two icons - 1 being headphones with music symbol (wireless stero profile) 2 being headphones with another round symbol i cant make out (for the headset profile)
After you disconnect both the phone and headset the problems start. I turn on the blueooth on phone and headset, but I only get one symbol appear and thats the second one. This means i can use to make recieve call but not listen to music.
After along time messing about i found out that if you go back into the bluetooth device profiles and remove the tick for wirless stero and save config - then go back in and re-tick and then save evething starts working again until you disconnect again
I now have to do the remove tick and add tick everytime I want to use my bluetooth headset which is annoying. Thats why im conviced there are problems, so becareful when you setup as it might be working first time but you wont know unless u check it straight away on the initial pairing
james00000007 said:
Personally I think the bluetooth is bugged. This is what I have figured out when connecting my headset.
First time I paired everything worked fine. The paring profile was correct. There are two differnt profiles matched -1st the wireless stero and 2nd Headset
So this gives me two functions after pairing - 1 = listening music on my wirless headphones and 2 = making and recieving calls through the heahphones.
This gave me two icons - 1 being headphones with music symbol (wireless stero profile) 2 being headphones with another round symbol i cant make out (for the headset profile)
After you disconnect both the phone and headset the problems start. I turn on the blueooth on phone and headset, but I only get one symbol appear and thats the second one. This means i can use to make recieve call but not listen to music.
After along time messing about i found out that if you go back into the bluetooth device profiles and remove the tick for wirless stero and save config - then go back in and re-tick and then save evething starts working again until you disconnect again
I now have to do the remove tick and add tick everytime I want to use my bluetooth headset which is annoying. Thats why im conviced there are problems, so becareful when you setup as it might be working first time but you wont know unless u check it straight away on the initial pairing
Click to expand...
Click to collapse
Got excactly the same problem. Tried A2DPToggle but that thoes not work on my T-HD. Hope someby knows a tool or an answer for this.
absolutely agree , bluetooth is buggy !!!
sometimes I am loosing the connection to my car , sometimes it worked fine for hours , sometimes only for minutes
if I am listening to music (ds980) and receive a call, the connection to hear music is lost after closing the call
if I have some longer calls, sometimes the connection drops
so at the moment bluetooth @ HD is absolutely not stable !
buggy BT still happening?
Had issues with Nokia E71 randomly dropping/reconecting BT ... sometimes dropping during a call ... sold it on eBay
Brought Omnia i900 - Voice over BT headset does not work ... (but now a fix has been found over at modaco.com so happy)
was seriously looking at touch HD but will not if this thread is correct as sick of paying out good $$$ and finding a must have feature is not working
Q. has a fix been found or is BT still buggy
thanks
Bluetooth Problem
I think the problem may have something to do with multi-function devices (make and receive calls + stream music) I'm having problems with my Jabra
SP700 ,pairs no problem , 2 icons in top bar , can make calls and play music. Switch off phone or Jabra and then reconnect I can only make calls, no music, even though the 2 icons are displayed in top bar. I also have a Sony Erricson external speaker and a pair of Sony headphones both of which work fine no problem. Is this something that can be fixed with updated bluetooth drivers for HD?
Hi there,
Finally I assume I found out why some people have problems with their unit using BT and others not.
Those, who use BT headsets only (not stereo) and don't use the AD2P and AVRCP Profile don't have any problems. (I can confirm this - tested it with HBH-660 and Motorola without any troubles!)
And those people who have a stereo headset like the HBH-DS980 (which I own personally) and/or do own a car radio that can receive AD2P signals to transfer Stereo sound, face with the BT disconnections while listening to music and/or during a call or just right after...
So I think SE should solve this issue quickly as it seems to be a problem in WMP 6.1 in accordance to X1 hardware with AD2P / AVRCP profile devices.
So I start a poll for anyone who could confirm this or not !
BTW: I am using the Generic AT ROM but this BUG is affected through all other ROMs too, so that shouldn't matter -
Thanks,
Freako
My kenwood headunit uses avrcp and a2dp and works fine.
There was a discussion on this issue already and it does exist w/ my AT&T Tilt (Kaiser) as well w/ all the A2DP headsets I tried (SE DS220/205/980, JVC BT-1, ClipD R Radio, Jabra (forget what model)) so far
I believed the bluetooth issue that R2A fixed is another one where BT will turn itself off if not use for a while.
The 'turn off' issue is still there with mine! I had it only after 2,3 days but then continuously turn off by itself! Now, still happening! Generic_UK R2A
Generic Swedish R2A.
No problem for Bluetooth! But when I softreset x1 via spb mobile shell panell it crashes on boot.
jackleung said:
There was a discussion on this issue already and it does exist w/ my AT&T Tilt (Kaiser) as well w/ all the A2DP headsets I tried (SE DS220/205/980, JVC BT-1, ClipD R Radio, Jabra (forget what model)) so far
I believed the bluetooth issue that R2A fixed is another one where BT will turn itself off if not use for a while.
Click to expand...
Click to collapse
Yes absolutely Jackleung, you're right, the new firmware should have fixed the automatic turn off of BT only, but I belive what michaelthemage said, that it still exists after his UK firmware update so do I - today the BT icon dissapeared suddenly - so it was turned off automatically ... very curious...
Anyway, Jackleung, you say that this problem was present in earlier WM6 machines like the Kaiser? As far as I know I did not try a stereo BT headset on my previous Tytn II but you say it seems to be a bug in WM6.1 in general, right ?
Very interesting that trinode doesn't have these problems with it's Kenwood headset - maybe I give it a try if it isn't too expensive -
On the other way Persian Boy links it with the SPB Shell - I do have the standard SBP Panel that you can download from web. Maybe I should uninstall it and try again - maybe the SPB panel makes these troubles? Personally I can't imagine, but will try anyway -
So far,
Freako
trinode said:
My kenwood headunit uses avrcp and a2dp and works fine.
Click to expand...
Click to collapse
Can you please tell me the exact brand of this headunit by kenwood?
So you did try transferring music to the kennwood radio and there were no problems like sudden disconnections or so?
Thanks,
Freako
Freako said:
Yes absolutely Jackleung, you're right, the new firmware should have fixed the automatic turn off of BT only, but I belive what michaelthemage said, that it still exists after his UK firmware update so do I - today the BT icon dissapeared suddenly - so it was turned off automatically ... very curious...
Anyway, Jackleung, you say that this problem was present in earlier WM6 machines like the Kaiser? As far as I know I did not try a stereo BT headset on my previous Tytn II but you say it seems to be a bug in WM6.1 in general, right ?
Very interesting that trinode doesn't have these problems with it's Kenwood headset - maybe I give it a try if it isn't too expensive -
On the other way Persian Boy links it with the SPB Shell - I do have the standard SBP Panel that you can download from web. Maybe I should uninstall it and try again - maybe the SPB panel makes these troubles? Personally I can't imagine, but will try anyway -
So far,
Freako
Click to expand...
Click to collapse
The problem I am talking about is A2DP/Headset disconnected after phone call, and I have to re-connect it after that. I don't thinks it's WM6 or SPB panel issue since only HTC devices (X1, Kaiser w/ no SPB install) have this issue. My other device Asus P525 (WM6/6.1 w/ Widcomm bt stack) or Eten M600 (WM6 w/ MS BT stack) do not have this issue.
Is anyone with the Bluetooth problem running MS Voice Command? I'm still on R1A. I had no trouble at all using my Motorola T505 A2DP kit, but when I installed MSVC, the stupid thing would drop out as soon as I picked up a call. Uninstalling MSVC seems to have done the trick.
bedlam_au said:
Is anyone with the Bluetooth problem running MS Voice Command? I'm still on R1A. I had no trouble at all using my Motorola T505 A2DP kit, but when I installed MSVC, the stupid thing would drop out as soon as I picked up a call. Uninstalling MSVC seems to have done the trick.
Click to expand...
Click to collapse
Hi, yes I have Voice Command 1.6 on my device. It's working pretty well, but I know, what you're talking about -
Please try it with a usual BT headset (without the AD2P / AVRCP profiles!) if you have this possibility, - you'll see that it will work without any hassle.
I made this experience after I tried the HBH-660 and a Motorola headset.
Anyway - the new firmware R2A is recommended, even if the BT issue isn't solved.
But interesting to know that it seems to be a bug in HTC machines... so it will exist in further firmware updates... probably... I personally don't hope so....
No problems with the Sony HBH-IS800's and the bluetooth turning off randomly.
I have a problem with the WIFI randomly turning itself on during phone calls but no problems with anything turning off.
I have HBH-DS980 and I don't have any problems with disconnecting it on my X1 - not with R2A and not with R1A UK roms, also tested few modifided roms and there woudn't any problems too. I am also using SE MBW-150 watch and it also don't disconnect's with X1 (tested with R1A and R2A). I have BT turned on in my X1 all the time (previously in R1A rom and now in R2A) and after I turn on my HBH-DS980 headsets it will connect with them automaticly. Only sometimes I have to switch off and switch on againg BT to get connected with headsets but I think its headsets problem not the phone. But I never had a problem with suddenly disconnecting (not even once).
ell82 said:
I have HBH-DS980 and I don't have any problems with disconnecting it on my X1 - not with R2A and not with R1A UK roms, also tested few modifided roms and there woudn't any problems too. I am also using SE MBW-150 watch and it also don't disconnect's with X1 (tested with R1A and R2A). I have BT turned on in my X1 all the time (previously in R1A rom and now in R2A) and after I turn on my HBH-DS980 headsets it will connect with them automaticly. Only sometimes I have to switch off and switch on againg BT to get connected with headsets but I think its headsets problem not the phone. But I never had a problem with suddenly disconnecting (not even once).
Click to expand...
Click to collapse
Thank you very much ell82, but maybe I should describe more specifically - disconnections also happens after calls - for example, if you switch on your BT headset (in this case the DS-980), you see a symbol next to the BT symbol on the top of the phone, that indicates, that a BT headset is connected. Now, I figured out, that after calls this symbol dissapears and the BT headset dissconnects, so I have to push the button on the DS-980 again to get connected with the phone, you know? And when I get a call, the phone does not automatically transfer the call to the headset, I always have to push the button on it first, to be connected again...
And you also confirm that sometimes you have to switch the BT on and off again - this is absolutely the same with my phone.
You assume it is a problem with the specific headset DS-980 ? Maybe, but SE support told me that there is no firmware update or sth. similar for this type... what a pity -
Anyway I hope it is not a hardware bug of the phone - I haven't heard of any phone that was repaired or refurbished because of the Bluetooth bug.
Ok, so can we say that the HBH-DS980 will not work with X1 as it should do ?
This is very pity, because it is the top of thir line of headset products... and I liked it very much on my previous P1i and it worked perfectly on it...
Freako said:
Thank you very much ell82, but maybe I should describe more specifically - disconnections also happens after calls - for example, if you switch on your BT headset (in this case the DS-980), you see a symbol next to the BT symbol on the top of the phone, that indicates, that a BT headset is connected. Now, I figured out, that after calls this symbol dissapears and the BT headset dissconnects, so I have to push the button on the DS-980 again to get connected with the phone, you know? And when I get a call, the phone does not automatically transfer the call to the headset, I always have to push the button on it first, to be connected again...
And you also confirm that sometimes you have to switch the BT on and off again - this is absolutely the same with my phone.
You assume it is a problem with the specific headset DS-980 ? Maybe, but SE support told me that there is no firmware update or sth. similar for this type... what a pity -
Anyway I hope it is not a hardware bug of the phone - I haven't heard of any phone that was repaired or refurbished because of the Bluetooth bug.
Ok, so can we say that the HBH-DS980 will not work with X1 as it should do ?
This is very pity, because it is the top of thir line of headset products... and I liked it very much on my previous P1i and it worked perfectly on it...
Click to expand...
Click to collapse
This is exactly the same issue I am talking about and it's NOT specific to DS-980 alone. I tried DS-980, DS-205, DS-220, JVC BT-1, Clip-D Radio, and one Jabra model. And they all have the same issue on my X1 and Kaiser. (but not on my Asus P525 and Eten M600). The issue not happening 100% of the time but at least 80% which is enough to be frustrated.
jackleung said:
This is exactly the same issue I am talking about and it's NOT specific to DS-980 alone. I tried DS-980, DS-205, DS-220, JVC BT-1, Clip-D Radio, and one Jabra model. And they all have the same issue on my X1 and Kaiser. (but not on my Asus P525 and Eten M600). The issue not happening 100% of the time but at least 80% which is enough to be frustrated.
Click to expand...
Click to collapse
Yes, 80% of that time is ok, but the 20% lead to be very frustrated - ABSOLUTELY !!
In a time (2009) were bluetooth does exist several years and where all bugs should have been cleared over the years..., the truth shows that there still exist "minor/major?" bugs in current phones...
BT Headset problems
I can confirm that the problems with BT and HBH-DS970 are a fact - and it seems to drain the battery enormously. I have tested for a few days the PV 710 (Mono handsfree), no issue. Today with the 970 my battery was empty after 6 hours standby, and it was disconnected allthough the icon said "BT-Stereo-Headset connected! After switching it off, the icon remained. Strange, isn´t it?
I come from P1i and there was no such problem at all.
I experience the same problem. New NL firmware and a Volkswagen (Bury OEM) Bluetooth carkit. My Nokia 6500 and SE K850i work perfectly but terminating a call makes the BT connection disappear on a fairly regular base. If the other party terminates it usually stays connected
...very strange but anyway it seems that it is mainly affected with AD2P / AVRCP devices - I hope it is just a software/firmware bug that can be fixed easily and not caused by a hardware failure....
Sorry guys but again I have to say it doesnt effect on my X1 and DS-980, never and I'm using it a lot. Have you guys tried it on fresh phone, without any additional software?
ell82 said:
Sorry guys but again I have to say it doesnt effect on my X1 and DS-980, never and I'm using it a lot. Have you guys tried it on fresh phone, without any additional software?
Click to expand...
Click to collapse
The first thing after the purchase of the phone was to couple the device with the DS-980 headset and the bluetooth issue was really not expected and made me angry and at that time I didn't have any extra software on it...
When did you buy your headset ? I bought mine approx. 1 1/2 years ago...
Maybe the current items go better with the X1?? I don't know.
But we found out that this issue was also caused in other Windows Mobile devices like the Kaiser, TyTn etc.
The poll shows significantly that there are still some who have troubles with bluetooth, even after update-
AND now we can ask them if any of you have tried the headsets with clean and fresh install ? (Xperia X1 without any additional software, even without sbp panel, etc...! )
I am curious...
Freako
Hey, is anyone using the bluetooth headset Jabra BT8040, When I first bought the headset, I had no problems using it. But I've noticed a few months ago, that whenever I use the device, the person I'm calling wont be able to hear me but I can hear them. Anyone have any ideas to solve this problem?
Similar problems
I've got the same earpiece and I've had some problems with it, including: unable to pair (or saying it's paired when it really isn't), unable to connect the BT on a call, and sometimes the earpiece will just disconnect from the phone (but the call will still remain active).
That last one is the closest I've come to your issue. I usually have to put the phone in discovery mode (and the earpiece) and try repairing them from scratch.
I've heard from others with this earpiece that they haven't had problems, but I don't know anyone who has this earpiece and the Raphael. Also, I've got the Motorola S9 bt headphones and I haven't had any problems with them. So, I'm not 100% it's the earpiece but then again it could be.
i have this jabra for about 6 months and had no problem at all with Raphael!
Changed ROM
I've just changed the ROM on my phone (as in signature line) so that may change things for me with the Jabra BT.
BPB21 said:
I've just changed the ROM...
Click to expand...
Click to collapse
Please post your results with your new ROM...David.
Updated ROM & BT
Black C5 said:
Please post your results with your new ROM...David.
Click to expand...
Click to collapse
I'm using the updated ROM and radio in my signature line with the Jabra BT8060 (wasn't it? whatever the one we were talking about in this post is) as well as a Motorola S9 and I pair it with my laptop for internet access that way. So far I have not had the same troubles with the Jabra BT as I used to. It could be due to updated drivers for the BT or the fact that I'm not using TF3D (just the new WM6.5 interface).
Either way, I'm having good results so far.
I spoke too soon on BT...
I've spoken too soon on BT. I was trying to get my Motorola S9 working so I could listen to music from my phone. No luck at all - it shows the S9 connected for both the calls and the the music, but it only works on calls and the music plays on the device with the speaker. And it was working just fine this morning. Bluetooth in general is so frustrating to me that I would literally remove it from every costom ROM I use EXCEPT for "Internet Sharing" (on an Acer laptop and netbook) over bluetooth and activesync with a PC. Not just with this phone, but seriously, with BT 2.0 it should work A LOT BETTER than it does.
I have similar issues with several different Moto H700's. I can hear them but they can not hear me. Possibly the BT drivers from HTC need a fix????
Hi
I have the T-Mobile G2 Touch and a Motorola S9 headphones. Using the Origianl Stock T-Mobile ROM i have had no issues with bluetooth.
BUT
using the generic 2.73 ROM i have issues with connecting to the headset
It will connect, then instantly disconnect, then try to connect again, at which point it fails to connect properly
To Reproduce:
Using a HTC Hero & 2.73 ROM
Pair your S9's with the Hero
then Turn off the S9's and Bluetooth
Then turn on Bluetooth, and the S9's with the Bluetooth Settings up
you will see it say "Connected with Media", "Paired but not Connected", then "Connecting......." at which point it will fail
I have tried all the different radio versions to make sure it isnt a issue with the radio, but the same problem prevails.
Does anyone have any ideas on how to fix this issue? or what is causing it?
I also had issues with an unlocked Hero and a Sennheiser MM200 headset. Worked perfectly on original rom, but very fiddly to setup with the 2.73 rom.
The only way I can get them to work properly with the phone is to:
1) Make sure headset is turned off, as well as bluetooth on phone
2) Turn on headset
3) Then turn on bluetooth on phone
Headset connects as normal - any other sequence doesn't work.
I have tried this, and it doesnt seem to work. I have been trying it for the last hour.
While in Bluetooth Settings it says its connected with media, then is disconnects, then it trys to connect again, and then it just says "Connecting.........." for ages
The Headset light flashes as if it was connected.
I also had problems connecting MM200. I could connect it, but then it kinda stuck when i was pressing play button.
But then i decided to check my old sony ericsson bluetooth headset - it was working normally. And after that the MM200 also was working. One wonders.
Still i've noticed some stuttering problems when song starts. And it seems to start with faster tempo and then slow down after 10 seconds to normal speed (could be related to that stuttering? Trying to compensate for the lost time or something). No issues when i'm listening to wired headphones - so it must either something with hero bluetooth or MM200.
I have to check how it works with my old headset, but i'm kinda afraid of having MM200 connection problems again.
Ok
i will keep playing around. i have some CX-300II coming next week so i have a backup plan if i cant get the bluetooth stuff working properly
Thanks for your help
raywiper said:
I also had problems connecting MM200. I could connect it, but then it kinda stuck when i was pressing play button.
But then i decided to check my old sony ericsson bluetooth headset - it was working normally. And after that the MM200 also was working. One wonders.
Still i've noticed some stuttering problems when song starts. And it seems to start with faster tempo and then slow down after 10 seconds to normal speed (could be related to that stuttering? Trying to compensate for the lost time or something). No issues when i'm listening to wired headphones - so it must either something with hero bluetooth or MM200.
I have to check how it works with my old headset, but i'm kinda afraid of having MM200 connection problems again.
Click to expand...
Click to collapse
I think the speeding up / slowing down and stuttering is more to do with the Hero - I have tried the headset connected to a laptop and there is no problem whatsoever. Hopefully the next Android update will improve the bluetooth problems.
not compatible with new mazda 3
Well the hero is probably the best phone ive had and ive had many many phones over the years including the jesus phone which was pants.
Well ive just bought a new mazda 3 and unfortunately the hero does not like connecting to the car via bluetooth. tried all sorts. sometimes it works but usually only for a couple of times and then manages to lock the car radio up.
So its bye bye hero for me as i need a compatable phone for my car. looks like its back to nokia...shame as i really love the phone
I have a Jawbone Prime headset, and I'm having trouble with it connecting to my rooted Eris, and when it does connect sometimes, it doesn't work properly, I'll hear the ringing through the headset, but have to use the handset to talk, and it randomly disconnects. I didn't have this problem with other phones and the same headset, and ideas as to what could be wrong with this?
Dagouk said:
I have a Jawbone Prime headset, and I'm having trouble with it connecting to my rooted Eris, and when it does connect sometimes, it doesn't work properly, I'll hear the ringing through the headset, but have to use the handset to talk, and it randomly disconnects. I didn't have this problem with other phones and the same headset, and ideas as to what could be wrong with this?
Click to expand...
Click to collapse
I had the same problem with my pioneer radio after rooting. It worked perfect prior. I have tried every ROM there is and the only ones that seem to correct the issue are the cynagonmod based ROMS. I am running ELB 2.5 now and it works great. Only drawback is it wont connect to my work exchange due to security policies where as the other 2.1 roms will. Hope this helps
Thanks for the advice
Thanks for the advice, I'll have to give it a try, I love the HTC Eris, but can't stand using it without a headset. Now if I can only get it to work on my car head unit as well...lol Have to love bluetooth... Can't live with it, can't live without it