Hell Everybody,
I tried to Flash eng rome to my italian hw 6915 (using aWizard tool). while in the last step, i mistakenly disconnected the device as it was showing device disconnected for long time. Now its not possible to hard reset the device. The device always shows:
HP iPAQ
Mobile Messenger
on the top and
on the down right bottom it show red text written:
1.00.00
1.21 UK
Please help, What can be done at this stage
Related
Hello
my PDA is waiting in Canary Mode (after launche EnterBL.exe in Wince)...is there a functiun to type i my hyperterminal to restart Wince please ? a hardreset only restart the PDA in the bootloader prompt...nothing else
i don t want to send back the PDA to the OEM...
help me please
Thanks
Braynaud
enterbl.exe
hi guys, I am new here. I have recently bought an O2i on ebay
ROM version: 1.10.00 WWE
ROM date: 12/24/04
Radio version: 1.00.00
PROTOCOL VERSION: 1337.39
ExtROM version: 1.10.124 WWE
I have been reading the forum for a while trying to look for the unlock software. I know some guys here have worked hard and created unlocks for the O2 model. I have tried that on mine and didnt work (I know but I had to try).
Anyway I have downloaded the enterBL.exe from here and tried it out and now I could not get out of the Boot Loader mode. I have tried hard and soft reset but no luck.
Could any1 please help.
Cheers
got out of enterbl.exe
Hey Braynard, I got mine out of the "bootloader mode" by following the version upgrade without actually upgrading and got my xda working again, thanks to the guys in here.... and now searching for the unlocking software....
cheers
meaning you ran Himalaya Upgrade without an *.nbf??? this works???
but what if i was in the middle of the desert (as i am now) without a computer (just my PPC), how do i get out of bootloader mode? :shock:
bootloader mode
I am no expert in this but I downloaded enterbl.exe from here then executed it and got mine in that frustating state. If you are in the desert then I can only suggest to do a Hard Reset if you havent done it already. How did you get in that state from the start anyway?
well, i got into that mess when i was flashing my Qtek2020 with the 1.60a64. i don't know why but the upgrade always stopped at 39% (i forgot the error message).
so i tried soft/hard resetting to no avail -- even tried removing the battery for 30 minutes.
i got out of bootloader mode after i got another copy of the HimalayaUpgradeUT.exe and continued the upgrade. :shock:
btw, i am really in the middle of a desert -- i am in Riyadh, Saudi Arabia. :shock:
send "set 14 0" command via usb console, then soft
this is what RUU.dll!BackCEMode() function sends to bootloader
Hi...
I upgraded my qtek 9100 from OS version 1.6.7.1 to cingular 1.8.11.1
The problem is that now, the phone doesn't start... the splashscreen appeears, along with... IPL 2.17
SPL 2.21
GSM 02.07.10
OS 1.8.11.1
But doesn't get out from there...
Did a do anything wrong?
PLEASE help me?
Is there any solution or is it bye bye qtek?
maybe you flashed broken or wrong rom.
start your device in bootloader mode (look in wiki how to do this) and then reflash again and if this does not work, get rom from your provider and reflash with this.
...
But my pda starts and it stays in splashscreen... is it repareble anyway?
Yes it should be fixable
Cant understand why you would want a old cingular rom (the cingular is not exactly same hardware as your phone wiza200 vc wiza100!)
You should download an aku2 rom here ftp://xda:[email protected]/Wi...digy_2170702_21707102_20710_QTEK_WWE_Ship.exe
user name xda password xda
Next get into the bootloader screen - turn device off and start with camera button pressed - should be a multicolor screen
Next attach device to pc via usb cable
Flash with above rom and all should be well
In my HP was problem with RADIO. I want repair this problem and i write "P10504_BT_HP_Radio_Patch". On screen displaied HP logo and vG. 39 (light is off) and computer show error 605. Now when i want write any ROM to my devince computer show this error again. I was trying write Orange rom (hw6915_up_2_french(Orange)_flasher) and english ROM (G3 DEVICE ONLY hw6915-1.21uk) but this not help me. Now when i power on my HP on screen is HP logo and vG. 39(bootloader) again. Sorry for my bad english and i think that you help me
In MMTY.exe i do "task 28 55aa" end now when i power on my HP LCD is black but when i do bootloader mode i see "serial" and vG 3.9 (my phone is g3 or g4?) When i writing new rom in bootloader mode computer show error;/ Maybe i have CID lock ?? How i unlock my phon ?? Please help me In this site: "http://forum.xda-developers.com/showthread.php?t=471942" is manual but i need rom G4 and i have G3 only ;/ )
helllo
just add me to your yahoo messenger list :cata_cata_cs. i cand help you restore the hp..but unfortunately i can't make it work as a phone. only pda and gps
hw6915 german to spanish problems
Hi. Please . I tried to change the language German to Spanish after. I was start the process with . - hw6915_up_2_spanish_flasher
when the installation process finish (I'm not sure if I disconnects the PDA from the base before finish the process because now on the screen appears the following.
Serial + hp + vG.39 but change when I conect it to the computer to : USB + hp + vG.39
I don't now what is the next step or what I can do but the thing is that now the PDA is inoprative. NO GERMAN - NO SPANISH
please can you help me to repair or finish the process.Thank you very very very much in advance for your cooperation. and sorry for my bad english
[email protected]
I have loaded a long time ago an old version of ROM Gelly.
This ROM worked perfectly to a friend who suggested to do the same with my trinity.
The PROBLEM is that when i try to open the pda it freezes to the first srceen showing the rom version and after....nothing!
I tried to load again Gelly from the bootloader, it begins to run, it runs about 1% then the trinity makes a flash (this means it loses the connection with the pc) and then shows me again the first screen....
Please i need help!
In the bootloader it shows:
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
And in the first screen:
M05
D 01 Gelly
B05
and then it stack....
same problem as me now i cant unbrick or change my rom anyone help please
Dear All,
Please urgent help required.
my HTC P3300 (Artemis) stuck up when i was trying to start it up. when i use to turn my cell on, i goes to the starting screen shows the following numbers and then stuck up.
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 3.7.0.0
the screen does not move after that. i tried soft reset through the reset button but result is the same.
i also tried hard reset and when i puch the green phone button to proceed, a message come "FORMAT FAILED" and the phone stucks up.
i am quite a lot of problems since i have upgraded to WM6 from WM5 last week.
i am quite sucked with this problem. not been able to use my set since yesterday.
please also note that my HTC was not syncing with my PC since i have upgraded to WM6.
PLEASE HELP URGENTLY.
Nomi
You must upgrade :
-Remove SD-Card
-Remove Sim-Card
-USPL
-Upgrade new ROM
thank. i got through to install wm 6.1.
can any one please tell me which is the most stable ROM for 6.1 or 6.5
which one is better for my HTC artemis.
please post link to the ROMs
I'm using two roms :
Shady313-23081R1 : http://forum.xda-developers.com/showthread.php?t=546805
dheewatara-s 23075B1 : http://www.pdamobiz.com/forum/forum_posts.asp?TID=255901&PN=1
same problem..pls help
i have same rom and ratio with u nomi...but my problem still occur...
where do u get the USPL eventually?