i have one SPV M650 with orange i have try to update with ARTE_WWE_WM6_Back_Blue first i have use Artemis_USPL to make it super cid and than i have flash it but now the phone hangs at start up at the orange logo
i see only this info
IPL 1.84.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
how can i repair this phone
up
same promplem i have
plz help
GaziKs
jeuasri
You need to flash your device=official-factory wm(it includes ipl+spl+gsm drivers)
Like BIOS on your PC
To connect your device with pc=device need to start in Bootloader-tricolor mode(power off device=push voce dial key+power on)
After flashing,when your device will be OK(loading and working) read this
http://forum.xda-developers.com/showthread.php?t=308242
Sorry for my bad english
GaziKs said:
i have one SPV M650 with orange i have try to update with ARTE_WWE_WM6_Back_Blue first i have use Artemis_USPL to make it super cid and than i have flash it but now the phone hangs at start up at the orange logo
i see only this info
IPL 1.84.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
how can i repair this phone
Click to expand...
Click to collapse
jeuasri said:
up
same promplem i have
plz help
Click to expand...
Click to collapse
i have same pb too...
what is the solution..?
Related
Ok here is the "Thing"
i put a hermes ROM on Elf (soft black) and i think the SPL and IPL has changed
its now:
IPL 1.17.0002 ,is it right ?
SPL 1.17.0000, is it right?
and i tried to download the Offical HTC elf Rom but after 2% it restart and write ID Vendor ERROR
what should i do?
P.S:i tried to do SuperCID but it need The ActiveSync Progoram to be ON, im stuck on bootloader Screen
MKR
I have a big problem, i when i started my SPV M650 (Orange phone) 2 days ago it didn't want to start (blocked on orange splash screen)so i reset my spv but still the same.
ipl 1.84.0001
SPL 1.84.0000
GSM 02.67.90
OS 1.28.0.0
PLZ HELP
THX
go to bootloader mode, download and flash official ROM for your device.
It is not dead, dont worry!
but before that please write your upgrade procedure, did you CID unlock device, which ROM U used....
hi
I have a dead htc hera100 after flash now just enter in boot mode (tricolore)
IPL: 1.08.0001
SPL: 1.08.0001
I don't make a hardspl for it
now it doesn't accept any firmware
any idea
Thanks
maverick_lp28 said:
hi
I have a dead htc hera100 after flash now just enter in boot mode (tricolore)
IPL: 1.08.0001
SPL: 1.08.0001
I don't make a hardspl for it
now it doesn't accept any firmware
any idea
Thanks
Click to expand...
Click to collapse
Your SPL is below 4, so you cannot flash the phone. Your only option might be searching for and doing a "Goldcard".
Hi I have a P4350 but would not connect with my PC
before i flahst my mobile it only want to connect with my pc now it don`t want to connect with my pc and stil giving a wit screen
i flasht my mobile with :
RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship_2
if someone has a solution please mail me [email protected]
Hello, I have Arte100 and all I can do is to enter in boot mode... I try to update rom, but always get "error 226".
ipl 1.12.0001
spl 1.12.000
Any help maybe?
Thx
I have similar problem, here I need official rom 1.12.404.1 NLD.in case you find something, help and me please
ok man...
If you phone its htc p3300 nld,try this:http://www.filestube.com/7ecfb875ce01017303ea/details.html
3.13.404.1
SPL locked, so you get the error!
Unlock USPL first then afterthat flash!
SPL shall become 1.11 instead of your 1.12..
follow these steps:
1) USPL your device click here
2) Flash any new rom you like click here for original shipped roms or search this forum for any other rom you like....
hello
my english ist not perfect but i think that i can describe my problem.
i have a herm300 (is written in the back of the phone).
IPL-1.01
SPL-2.03
I tried to flash my hermes with an other language Rom. I've forget to install hardspl. At 40% my device has reboot. I cant boot into OS. It freezes on HTC picture.
My device is CID locked. From germany T-Mobile.
Mtty tells me that my cid is: T-MOB101
If I try to flash the Hermes with a shipped rom, it reboots always at 1%. And it gaves an error like Invalid Vendor ID. Flashing with SD-Card brings an error, too.
In the Bootloader i see this:
Herm100
IPL-1.01
Herm100
SPL-2.03
Is my device now an herm300 or an herm100?
Please help me to flash it back!
temel007 said:
hello
my english ist not perfect but i think that i can describe my problem.
i have a herm300 (is written in the back of the phone).
IPL-1.01
SPL-2.03
I tried to flash my hermes with an other language Rom. I've forget to install hardspl. At 40% my device has reboot. I cant boot into OS. It freezes on HTC picture.
My device is CID locked. From germany T-Mobile.
Mtty tells me that my cid is: T-MOB101
If I try to flash the Hermes with a shipped rom, it reboots always at 1%. And it gaves an error like Invalid Vendor ID. Flashing with SD-Card brings an error, too.
In the Bootloader i see this:
Herm100
IPL-1.01
Herm100
SPL-2.03
Is my device now an herm300 or an herm100?
Please help me to flash it back!
Click to expand...
Click to collapse
hard reset your device then reFlash with Official ROM for Hermes
thanks fpr your reply
but it dont help.
always wrng vendor id. or the flashprog. is not for my device.
temel007 said:
thanks fpr your reply
but it dont help.
always wrng vendor id. or the flashprog. is not for my device.
Click to expand...
Click to collapse
One of the error message will appear when you use the wrong RUU to upgrade. Bill will check whether the ID Model and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
temel007 said:
hello
my english ist not perfect but i think that i can describe my problem.
i have a herm300 (is written in the back of the phone).
IPL-1.01
SPL-2.03
I tried to flash my hermes with an other language Rom. I've forget to install hardspl. At 40% my device has reboot. I cant boot into OS. It freezes on HTC picture.
My device is CID locked. From germany T-Mobile.
Mtty tells me that my cid is: T-MOB101
If I try to flash the Hermes with a shipped rom, it reboots always at 1%. And it gaves an error like Invalid Vendor ID. Flashing with SD-Card brings an error, too.
In the Bootloader i see this:
Herm100
IPL-1.01
Herm100
SPL-2.03
Is my device now an herm300 or an herm100?
Please help me to flash it back!
Click to expand...
Click to collapse
i hope this will help you. i had the same problem and i solved it las night.
you HAVE to flash the original ROM that its locked for - the cid as i can see is for this rom
http://rapidshare.com/#!download|133tl|24566916|HER_TMDE_1211113_1050200_GER_SHIP.exe|51835
as it has the CID lock that your device has - T-Mobile German T-MOB101 1.21.111.3 06/20/06 ?? 1.05.02.00 32.36.7010.04H 14955.2.3.0 2.3 1.04 106 1 look at this table http://forum.xda-developers.com/wiki/index.php?title=Hermes_Upgrades
and remember,after flashing with its original rom CID UNLOCK IT then flash any rom compatible with your hermes.
i had hermes 200 and it did the magic, no more frustrations for me
hope it works for you